How come my firefox doesn't look the same as my old one it looks very old fashioned

i had a problem with my computer so i uninstalled firefox when i redownloaded it, it appeared very weird as if it was a regular program light internet explorer and it doesnt have the nice layout of the old one i had

You most likely were running the old 3.6 version (available from http://www.mozilla.com/en-US/firefox/all-older.html).
Firefox 4 + has a new layout

Similar Messages

The ff default theme keeps re-enabling itself after computer restart even though I enable littlefox and restart firefox, and it does the same on more than one computer. I want littlefox to start with firefox, not have to enable every time.

I want littlefox to start with firefox, not have to enable every time the computer starts.

@kalos
Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
No pulseaudio --kill command so I couldn't run.
Checked systemd journal and there is no mention of PA this time.
Checked top, and grepped ps aux and there is no PA there either.
I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
_ vlc Videos/anime/fmab/01.mp4
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7fb604001248] main vout display error: Failed to resize display
But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
@nomorewindows
I see. That's too bad. At least we're not alone.
Last edited by Greduan (2014-11-14 01:34:29)

HT4009 How come my iPad doesn't accept the payment

Can you guys fix for me the pilling staff because I can't even download free apps its always ask about abut billing information

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
What happens when you try to buy or download things, does the 'buy' button not work, do you get any error messages ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we won't know it's appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If you only want to download free items then there are instructions on this page for creating a new account without giving credit card details : http://support.apple.com/kb/HT2534
If it's a different problem ... ?

How come all our devices ring at the same time

how all my devices ring when there is a call

Change Settings:
Settings > FaceTime > iPhone Cellular Calls = "Off"

How can you delete multiple copies of the same songs without deleting one at a time?

I have multiple copies of most of the songes in Itunes. How can I delete multiple copies without doing it one at a time?

Select/highlight more than one at a time followed by selecting Delete.

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

Firefox doesn't delete the browsing history in the address bar

No matter what you do with Firefox in clearing the browsing history by going to History -> Clear Recent History and deleting everything or resetting FF by going to Troubleshooting information, Firefox doesn't delete the browsing history. The website you have browsed still appear in the address bar.
Several people already have complained about this issue (see thread https://support.mozilla.org/en-US/questions/939028) and the answer from the Firefox staff is that there is got to be a malware. This is not true, I've seen versions of Firefox in clean computers both Windows and Mac with Firefox doing the same thing, or more like not doing what it's supposed to do: clean the browsing history.
How unsafe is that. Where is your privacy? Firefox has to find a way to fix this glitch. Something tells me they're doing it on purpose because it hasn't been fixed after the complains.

You can delete the places.sqlite file if you aren't able to clear all history.
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
Are that entries that appear if you click the arrow at the far right of the location bar?
Do these items have a star to indicate that they are bookmarks?

How come when I try to look at my photos in Iphoto a triangle comes out with an exclamation mark and I cannot see my photo?

How come when I try to look at my photos in iphoto a triangle comes out with an exclamation mark? Does this mean that I have lost all of my photos? Is there any way to fix this?
Thanks to all...

It means that iPhoto has broken the link/file path to the original file.
Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

How come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line

how come every time i'm on the phone and another call enters I answer it but it doesnt tell me anywhere who is who on each line so i can go back and forth?? it only says multiple calls and i cant hang up the other line.

My carrier is Sprint. But I actually have checked with others and theirs work fine.

How come my iweb template is half the size of my web page is their any way to expand it.

How come my iweb template is half the size of my web page is their any way to expand it.

The Inspector is the blue circle with the I.
The Inspector has 10 icons.
Each icon represents a purpose :
Adding hyperlinks,
Changing the textformatting,
Changing the width and height of objects,
Changing the page settings,
If you're familiar with a wordprocessor you will recognize most icons.
There's also an often ignored word in the menu bar : HELP
See if that helps you any further.

Preview doesn't act the same as it did in Snow Leopard. So now how do I...?

Hi all,
I'm getting frustrated because Preview doesn't act the same way now as it used to, and I can't find the solution in the Help menu.
Here's what I used to be able to do:
1) I'm a composer/arranger for musical theater productions. So, as I compose or arrange individual songs, I eventually save them all as PDFs.
2) To create a master piano/conductor's score, I used to create a master PDF file, then open up each individual song's PDF, and drag the pages into the master PDF file. Immediately after doing so, I was able to view the new pages in two-page mode, in the context of the whole book, to make sure the page turns were the way I planned them (since I often lay the music out with quick page turns in mind for the pianist/conductor). If for some reason the pages were opposite from what I planned, I just inserted a blank page before the newly-added song, to make the page turns work the way I needed them to.
3) When I was done importing all the songs, I'd print out the whole score.
My current problem
What I used to do (i.e., open up two documents, and drag the pages of one into the other) no longer works the way it used to. Now, Preview seems to view them as multiple separate documents, even though they're under the roof, so to speak, of one document. Let's say I drag 3 documents into the PDF I want to use as the master PDF. Let's say that each document is only a single page. I can't view them in two-page mode. I can select Two-Page mode in the menu, but it won't alter the view. Now, if document #1 is one page, and document #2 is five pages, I can view document #2 in two-page mode, but not document #1 and #2, together. (i.e., ideally, I'd want to see the one-page document #1 on the left-side in two-page mode, and the first page of document #2 on the right side.
Also, saving is a problem. It used to be that when I dragged the new pages into the document, I could just hit "save" and the new pages would be immediately included in the master PDF file. Now, Preview treats everything as separate documents, so I'll import document #5, let's say, hit "save" and it'll want to save the changes to "document #5."
The only workaround I've found for all this is to select all the pages in the master PDF and hit print, followed by saving as a new PDF.
But, do I have to do this on every addition?!? I have 40 songs, a Title Page and a Table of Contents that need to be imported into one PDF document. And they're not all ready to go right now. I was going to add a couple songs each day as I get them finalized and ready for print.
Isn't there a way to just add the new pages to the new document without Preview treating them as a collection of separate documents?
Thanks for your help.
Kevin

Thanks Barney! It is, indeed, working for me now. It's different than the previous incarnation of Preview, with no explanation of the differences in the Help menu (that I could find, that is).
So, thanks for your help!
Kevin

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

How can I open multiple instances of the same version of FF?

I understand that if I have multiple profiles, I can run different versions of FF side-by-side (like 3.6 and 4).
However, what I'm interested in is how I can launch multiple instances of the same version of FF (4, for instance) using the same profile. In other words, I want to be able to double-click the desktop icon for FF, and open a new instance, and keep doing that as many times as I want. I don't want to have a different icon and profile for each instance (too much overhead to keep a dozen+ profiles in sync).
I can always launch one FF window instance, and then keep clicking ctrl+N to launch new instances from inside it, which they all share the same profile (as I want). So, basically, I want to be able to do that from my desktop icon, rather than by having to do it with the keyboard ctrl+N sequence.

But I don't understand why whatever Firefox does when you click ctrl+N can't also be done (with some sort of command-line switch) from a desktop icon?
In other words, I clearly can create many FF instances (even if they are the same FF.exe process) by doing ctrl+n a bunch of times. Why then can't this behavior be done from a desktop icon with some parameters?
As far as I know, FF is the only browser that doesn't directly allow multiple browser instances from desktop icons. IE, Chrome, Safari, Opera, etc... all let me launch a new instance (even if they are all single process and the instances are shared within the process).

How come my firefox doesn't look the same as my old one it looks very old fashioned

Similar Messages

Maybe you are looking for