How come my game center is going to a white screen?

The base problem is that my game center is not logging in, it just goes to a white screen when I try and log in.
I have tried resetting my settings, per a post here. To no avail.
Any help would be apreciated.
Reofax

caleb.hollingsworth,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, select the First Aid tab if it’s not already selected, then press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get past the white screen now?

Similar Messages

How come my Game Center app badge displays a notification when I don't have one?

I am running iOS 7 on a wifi only iPad 3. I also have an iPhone 4S running iOS 7 and both have the same Game Center account. Recently I received a friend request for Game Center from a friend of mine and it was pushed to both my iPhone and my iPad. I accepted the request on my iPhone, which cleared the badge notification, but my iPad still insists there's a notification for Game Center, when there are none. I have tried visiting all of the tabs and menus and everything in Game Center on my iPad, but the badge still shows I have a notification.
Can anybody tell me why I still have a notification for this, and possibly give me steps on how to remove the badge notification? Thanks.

Same problem here. so the count is up to 4!
I've signed in with one of my kids Apple ID, and then game center doesn't display a badge notification anymore.
However, when I sign BACK IN under my Apple ID ... POP! Back it comes!
So my guesses are:
Something's getting cached in game center PER ID *OR*
There is a problem back on the server.
A side note, this is iPad Gen4 w/ iOS 7.0.2

How come my game center has no request tab (3 tabs instead of 4)?

I have a ipod touch 4g, with the latest version 5.1.
My friend has been sending me requests from her game center that has a request tab (all together 4 tabs), while I haven't been able to receive any requests nor do I have a reqest tab (so my game center has a total of 3 tabs: me, friends, and games).
I've already tried:
1) setting it back to factory version through itunes
2) openin up games through game center
Any ideas?

Go to settings then general then restrictions then scroll to bottom then make sure online multiplayer and adding friends are on

How come my ipad keeps on going black and white with the lago

hi
i was just on my ipad trying to get music off my ipad to my laptop than a note came up and said do u want to update your ipad i than press update 30 mins later my ipad keep going black and white with the lago
pleases help me or tell me what i can do with this/fix

The update does take time and 30 minutes is not unusual. Is there anything else happening on your screen such as a long bar that fills in very slowly?

HT4314 does anyone know how to recover game center's drgonvale levels for my 6 year daughter.

does anyone know how to recover game center's drgonvale levels for my 6 year daughter?
maybe i' asking in the wrong place.
thanks for taking time anyway.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My Macbook starts up, goes to the white screen with the gray apple, the little loading sign loads, and color wheel appears, and DOES NOT STOP PEIROD!

My Macbook starts up, goes to the white screen with the gray apple, the little loading sign loads, and color wheel appears, and DOES NOT STOP PEIROD!
Even when I restart, shut it down; or when it runs down to no battery, when I plug in the power cord for a while, it loads up to the same stinking screen!
PLEASE HELP ME!

Restart the computer and immediately hold the option key down.
If the computer boots and you see two hard drive icons, use the arrow key to select the Recovery drive, and press Return.
You will get to a screen that looks like the image here:
http://www.apple.com/osx/recovery/
Select the fourth item and press Return.
In Disk Utility, select the hard drive in the left column, then First Aid, then click on Repair Disk.
When that is done, quit DU and restart the computer.

When accessing Hotmail account on Apple Air ,any page when fully loaded just goes to a white screen, so no actions can be completed. Account is fine on Imac just Air functionality faulty, any advice

When accessing Hotmail account on Apple Air ,any page when fully loaded just goes to a white screen, so no actions can be completed. Account is fine on Imac just Air functionality faulty, any advice
thanks Bryce from OZ

a flashing folder with a question mark popped up,
Can mean that your Mac can't find a system folder to boot from.
Try restarting while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk and restart.
Startup Manager: How to select a startup volume
If the disk is not available, then it's failing or has failed.
If you did not backup your important files, an alternative would be data recovery but it's expensive.
One suggestion > Data Recovery by DriveSavers

My ipod touch 4g randomly goes to a white screen!

I just bought this ipod and I was going into an app and then it goes to this white screen?? I tried restoring it but the power and home button doesnt work! What should i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

My MacBook Pro will turn on and get to the login screen. After I login though it goes to a white screen.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

Hi, I have a MacBook Pro. It is plugged in and charging but will not switch on. I try pushing ctrl, shift, alt and power together then release and press power again. The laptop goes to a white screen but switches off straight away. Any ideas?

Hi, I have a MacBook Pro. It is plugged in and charging but will not switch on. I try pushing ctrl, shift, alt and power together then release and press power again. The laptop goes to a white screen but switches off straight away. Any ideas?

P.s. it is now going to apple logo on white screen then switches off

My ipod just goes to a white screen when i turn it on

my ipod just goes to a white screen when i turn it on

A white screen is one of those symptoms covered here:
iPod touch: Hardware troubleshooting

After restoring my ipod touch multiple times it still goes to the connect to itunes screen, freezes then goes to a white screen

Ok so i have restored my iPod touch multiple times the restore is "successful" my iPod touch 2g goes to the connect to iTunes screen then it just freezes. After about one minute it goes to a white screen until it dies. Any ideas?

If it does it after restoring to factory defaults/new iPod then yo have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

HT3529 i cannot open my messages app due to a ridiculously long text i sent, it goes to a white screen then just goes back to the home screen, what can i do ?

i cannot open my messages app due to a ridiculously long text i sent, it goes to a white screen then just goes back to the home screen, what can i do ?

OK, just remembered that someone had posted a solution for this "login loop" issue.
If you follow the directions here and be sure to enter all of this EXACTLY as it appears here, you may be able to solve this problem.
You will first need to boot into single user mode, which will bring you to a scary looking text only screen. Don't be frightened.
To do this, startup holding the Cmd-S keys together. At the entry which shows root# enter the following exactly. Write it down now, since you won't be able to copy/paste. Pay attention to case and spaces. Everything is lower case. The only spaces are between /sbin/mount and -uw, between -uw and / and between rm and /var/audit/current
Type in
/sbin/mount -uw /
Hit return and then at the next root# prompt, type in
rm /var/audit/current
Then hit return and at the next root# prompt type in "reboot" no quotes. Don't type in anything new until you get the root# prompt after entering each command.
If after entering rm /var/audit/current, you get a message back saying "no such file," then just type in "reboot" at the prompt.

How come my game center is going to a white screen?

Similar Messages

Maybe you are looking for