How come my ipad keeps on going black and white with the lago

hi
i was just on my ipad trying to get music off my ipad to my laptop than a note came up and said do u want to update your ipad i than press update 30 mins later my ipad keep going black and white with the lago
pleases help me or tell me what i can do with this/fix

The update does take time and 30 minutes is not unusual. Is there anything else happening on your screen such as a long bar that fills in very slowly?

Similar Messages

I update my ipad and then it when black and white with the lago

please help

Hey Vvhab,
If you are experiencing an issue with your iPad that happened while updating, try using the information in this article to help you address the issue:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht1808
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Hello - When I steam Netflix from my iPad, I only receive black and white on the TV. Any ideas why? Thank you, jackiedd

Hello - When I stream Netflix from my Ipad, I only received black and white TV reception?? Any thoughts why? Thank you, Jackiedd

Nope. It will reset all settings. For fix errors.
Or you can try Logging out and Restart your iPad and Sign in again.

HT204135 This is my first iMac. How come everything I print is in black and white? I have an HP Photosmart and it prints in color just fine except when I print using the iMac.

Unlike my other computers where I can change the printer setup ( color, black and white, paper type etc) I don't see that option on the iMac. Is it called somethng else? I want to retire my old computer but can't until I can print in color.

Thank you, I did that, after I click "show details" I see where I can change the paper size, reverse print etc. but I'm not seeing an option to swtich to color. On my HP and IBM PC's I can click on printer properties and change the print quality, paper type ( e.g.photo), grayscale and such. Do you by chance know if this is not an available feature on iMacs or maybe my printer isn't iMac friendly?

My iPad shuts off, goes black and reverts to the home screen

I have tried reverting back to the original configuration and doing a hard reset, but it still happens without notice.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
http://support.apple.com/kb/ts1827
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Black and White With Color Not Working

I am trying to have the background of my image black and white with the person in color. I turned black and white on then tried brushing black and white away from the person. Instead of the full, vibrant color coming back it was a dull color. Instead, I tried turning black and white off then brushing black and white into the background. This time, instead of being pure black and white it was black and white with an obvious hint of color. I have watched plenty of tutorials and know that it is possible to have it be pure black and white in the background with the person in front appearing in full vibrant color. I just don't know what I am doing wrong that either my vibrant color is looking washed out in one method or my black and white isn't pure black and white in the other method. When I first turn black and white on the image does go to pure black and white. Any suggestions?

See what happens after re-booting.
Is "Brush Range" set to "All"?
Try the same adjustments on another Image.
Try the "Color Monochrome" adjustment and see if it works as expected when brushed in/brushed away.
Message was edited by: Kirby Krieger -- added a line.

How to colorize parts of a picture in black and white with Aperture?

Hello, I have a question: How to colorize parts of a picture in black and white with Aperture?

Use the Black & White Brick and then brush in or brush out.
You'll find this and several excellent methods listed in the "More Like This" box in the column to the right of these messages. (This comes up regularly -- and while the "More Like This" is a roundabout way to get there, you'll find your answers.)

Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend!

Laserjet 2605dn - how do I turn it into a black and white only printer?

How do I turn it into a black and white only printer?
I just bought ink replacement for a whopping $563 which is way too much. My ink supplies have run out. I replaced the Balck ink but the printer is stuck in the "replace supplies" error w/ orange light flashing. Is there any way to re-configure the printer to only use as a B/W printer?

Found myself in the same boat. Try this link, worked for me
ebay review
As for printing in B&W only, I don't think this printer has that capability, at least from what I've read.
Message Edited by j_s on 02-06-2009 08:51 PM

How to make a photo half black and white with select colours

Hey,
Can anyone give me step by step instructions on how to make a photo black and white with abit of colour like the one attached... on CS4?
Cheers

Haven't seen you attached file as it takes a long time for attachments to load on this forum. Try little camera icon instead.
EASIEST way to have B&W in areas is to add Hue and Saturation adjustment layer. Use sliders to make B&W. Next paint on layer MASK, with black, to restore color in areas you want to show color.

Setting Black and White as the default when printing to a Canon Image Class 4080i

Hi,
I've got two Canon Image Class 4080i's that we are printing to at the school I work at. I have installed the Canon UFRII V2.40 Printer Driver for Mac OS X and we are able to print to them fine through any macbook running 10.5 to 10.7. My question is, how do I make the default printer setting be Black and White instead of color? I know how to change it from Color to Black and White by navigating to the Quality menu through the Print screen but I have to do this every time I print. Is there a way to make black and white the default?
Thanks in advance,
Cheryll

You’re really going to take photos straight out of camera on a 5d3 and print them with a blindly applied B&W conversion from the printer? I would highly discourage that, but if that’s what you want to do I’m sure it’s possible. Sorry, I have no experience with that printer so I can’t help.
Do you have a laptop? My recommendation would be to use a photo processing software like Lightroom (if you don’t have it LR5 is ridiculously cheap right now), play around before the event to get a B&W conversion that you like – even the preset ones are going to be better than whatever conversion the printer does - and then print from LR. It’d hardly take any extra time, and you could get a brief review of the conversions on a laptop screen before printing.

Black and White with Actionscript

In the website I'm developing I want to turn the background
image to black and white as the cursor moves toward the left side
of the screen or color when the user's cursor moves toward the
right side of the screen. Right now I have two images, color on top
and black and white on the bottom so all I'm doing is affecting the
colored image's alpha to make the black and white fade in.
Can this be done in action script? It would save on file size
because I would just need the colored image if I could turn it to
black and white with actions script. I know you can control the
filters with action script but even in the colorTransform filters I
don't see anything for the saturation.
Any help would be appreciated.
Any help would be appriciated.

Sorry, let me clearify. I have the mouse script and alpha
fading working already but I'm trying to find a different way to
get the same result. Using an alpha fade I need to have 2 images,
one b&w and the other in color. I want to use only one color
image and basically desaturate the image as the user moves their
cursor towards the left of the screen.

I have bought a Belkin composite cable from the apple store but the picture is black and white? The tv connection does require the red yellow white cables and that is the one I bought

I have bought a Belkin composite cable from the apple store but the picture is black and white? The tv connection does require the red yellow white cables and that is the one I bought? Can any one help

You have the iPhone in your profile, but people's profiles here are often incomplete or very outdated. It's better to be specific. And part of the problem is that I can't find any Belkin composite cables for connecting an iPhone to a TV, either on the Apple Store or the Belkin site. The closest I found is this Belkin video cable, which doesn't specify exactly what kind of connection it is.
For the most relevant assistance, you've got to post in the iPhone forum and specify the cable by providing a link to exactly which cable you're using.

Hp photosmart 7150 only prints black and white with mac

My hp photosmart 7150 only prints black and white with mac. I have tried installing and uninstalling, installing drivers, but no change.

Hi,
You did not mentioned your Mac OS X version, however I assume you have one of the latest versions.
The Photosmart 7150 is not supported on Mac OS X v10.6, v10.7, v10.8 or v10.9 and therefore it is more than likely that there are no drivers for your OS and the used Generic Driver only provide B&W printing.
Although it is not officially supported you may check 3rd party solutions such as the 3rd party HP-IJS print drivers which list your printer as supported.
Be sure to install any of the 3 required downloads, then click the plus sign under Printers & Scanners, click the Use drop down and click on Select Printer Software.
Search for your printer model form the list and select the driver, I believe that may work:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
Although it only list up to 10.8 (Mountain Lion) it should also work on Mavericks from my experience.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

Use markers on every beat.
The edit the zoom/scale to the markers.
Adobe Premiere Pro Help | Working with markers

How come my ipad keeps on going black and white with the lago

Similar Messages

Maybe you are looking for