How come my screen always freeze when Mozilla brings up a new version. That happened on last Firefox update and now when the new Thunderbird was installed. This is really bugging me.

I am using Windows 7. This never happened when I used XP Professional.

Hi John, thanks a lot, I see that. It actually answers another question I have. I already had that box checked, but I never knew that dialogue box was there. Anyway, my MOTU midi express 128 is dimmed and all 8 midi channel lights are on which has never happened before so there must be something wrong with my midi setup now. sheesh! This helps a lot! Thanks!
Rick

Similar Messages

Firefox updated and now when I try to open up a web page, Firefox completely closes the browser. When I open it back up, it asks to restore the session. What happened???!!

When you bring up the browser and type in Church of God's Messengers, it brings up the links. When you click on the links, it closes Firefox completely. When you bring back up Firefox it asks you if you want to restore the session. I never used to have problems accessing the site. What happened???!!!

stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad?

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

1)Copy this below from --{code} to --{code}
--{code}
set p2l to "" & (path to library folder from user domain)
set the_cache to p2l & "Caches:com.apple.iWork.fonts"
tell application "System Events"
          set maybe to exists disk item the_cache
          if maybe then delete disk item the_cache
end tell
if maybe then
          display dialog "I deleted the file :" & return & the_cache
else
          display dialog "The file :" & return & the_cache & return & "was unavailable !"
end if
--{code}
2) Than open Applescript Editor in your applications and paste it
3) Than select "Compile"
4) Than select "Run"

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

Not easily, unless you backed up your data.
Did you? If not, let that be a lesson to never install anything without a backup:
https://discussions.apple.com/docs/DOC-1992
https://discussions.apple.com/docs/DOC-1948

I updated the IPAD with the latest update and now when I turned on and I get the Itunes log and nothing elser

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

Hi ....
"I get the itunes logo and then nothing else"
Use Recovery Mode > If you can't update or restore your iPhone, iPad, or iPod touch

I backed up my iPhone to my computer before I did the ios 8 update and now when i go t restore it it tells me there isnt enough space on the iphone. I lost half of my pictures in my camera roll. Is there anyway i can get these back?

I backed up my iPhone to my computer before I did the ios 8 update and now when i go t restore it it tells me there isnt enough space on the iphone. I lost half of my pictures in my camera roll. Is there anyway i can get these back?

You did import these important photos over to an alternative storage medium, just like you would with any digital camera, right?

HT203175 My Windows XP recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes." I have never had problems in the past. Is this a real m

My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade. I have never had problems with iTunes in the past. Is this a real message or perhaps a virus?
Before I reinstall iTunes, any thoughts?

It's a real message.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

I have just had a system update a safari 5.1.7 a security update 2012-200 and a app update and now when i go into a site with flash it says i do not have adobe flash. I have installed it but still no luck? any help would be much appreciated Cheers Dave

I have just had a system update. Safari 5.1.7, a security update 2012-200 and Remote app update and now when I go into a site with flash it says I do not have adobe flash. I have installed it from the site but still no luck? any help would be much appreciated Cheers Dave

Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
WebKit built-in PDF

How to get a iphone 5s from iphone 5, i bought mine from walmart 4 months ago and now want the new one is there a plan that they have like you only pay a little if yoou take your iphone 5 ??

i bought mine from walmart 4 months ago and now want the new one is there a plan that they have like you only pay a little if yoou take your iphone 5 ??

Why do you believe you are entitled to an upgrade?
Do you get to upgrade to a new car when the manufcaturer releases a new model?
What about tv's? Computers? Appliances?
This is no different. If you want the newest model, buy it.

Just installed Firefox 18 and now when I hover over bookmarks they get blacked out, why ?

Just installed Firefox 18 and now when I hover over bookmarks they get blacked out, why?
Windows 7 ,Lenovo G580, 8Gb Mem, 4GB AMD radion graphics card, no other changes other than installing FF18

in this case the obvious other candidate would be an incompatible extension - can you disable them one-by-one to find out which one is interfering.
alternatively you could try to reset firefox (this will keep your bookmarks & passwords): [[Reset Firefox – easily fix most problems]]

I have the ipad original last week was prompted to download updates and now all the movies that once were full screen are now 3 inch across and i can ot get full screeen please can anyone help me get full screen agian

i have the ipad original last week was prompted to download updates and since then the movies that i had on the ipad are now only 3inches in length were before i was able to watch in full screen please can anyone tell me how to get full screen, apple support were not able to assist me

SeanD - message sent - any chance of a follow up
Getting Worse
. Best Effort Test: -provides background information.
Download Speed
13083 Kbps
0 Kbps
24198 Kbps
Max Achievable Speed
> Download speedachieved during the test was - 13083 Kbps
For your connection, the acceptable range of speedsis 12000-24198 Kbps .
Additional Information:
IP Profile for your line is -24198 Kbps
2. Upstream Test: -provides background information.
Upload Speed
1607 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 1607 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 2000 Kbps
We were unable to identify any performance problem with your service at this time.

How come my screen always freeze when Mozilla brings up a new version. That happened on last Firefox update and now when the new Thunderbird was installed. This is really bugging me.

Similar Messages

Maybe you are looking for