How come only one of my podcasts play?

How come only one of my podcasts play? If I download it then it will play, but they won't play in itunes. Only 1 will play.

How old is that enclosure? Sounds like it has an ATA controller inside that doesn't have support for 48 bit addressing and can only address 128 gigabytes.
Send it back and get an enclosure that supports the ATA-6 48 bit addressing standard or don't use a drive larger than 128 gigabytes in it.

Similar Messages

  • I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong

    I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong?

    Each email account can have its own alert or notification settings.
    Settings > Notifications > Mail > tap on each account and set the alerts you want.

  • TS1389 Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Hi Deb,
    Deauthorizing all is definitely the way to go.  You will just need to authorize your computer again after, as well as your husband's.
    Here's some additional information on deauthorizing all:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/ht1420
    I hope this helps!
    - Ari

  • How come only some of my iPhone music shows up on my Mac?

    How come only some of my iPhone music shows up on my Mac?

    Do you have more then one Apple ID? Have you tried signing out and back into the account?

  • How come some previously downloaded tracks wont play in itunes 11.1.3, and there is no option to download again

    How come some previously downloaded tracks wont play in itunes 11.1.3 and there is no option to download again?

    Hey KMK14,
    I understand you are having issues with a few tracks in iTunes. The best troubleshooting step may be to delete the song from your library, and re-download using iTunes in the Cloud (if available in your country).
    For more information, see the following:
    Songs in iTunes may not play back completely
    http://support.apple.com/kb/TS4357
    Symptoms
    Occasionally, if a song purchased from the iTunes Store on a Mac or PC was not downloaded completely, the song may not play back fully. The song may abruptly stop during playback, and iTunes may start playing the next song in your library or playlist.
    Resolution
    If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
    1. Delete the purchased song that is exhibiting the problem from your iTunes library.
    2. Click on the Purchased link in the iTunes Store to view your previously purchased music.
    3. Download your previously purchased song from this list.
    Note: iTunes in the Cloud, which allows you to download previously purchased songs from the iTunes Store, is not available in every country. Learn if iTunes in the Cloud is offered in your country.
    Thanks,
    Matt M.

  • HT2995 Only one speaker works when playing music. Is this normal?

    Only one speaker works when playing music. Is this normal?

    This being the Mac mini forum, I naturally presumed you were asking about a mini. But in any case, there's only speaker in an iPhone as well.
    Regards.

  • How come only some podcasts transfer to my ipod?

    I only subscribe to 2 podcasts. Both were transferring just fine and then one day only 1 podcast would transfer and the other one disappeared from my ipod. I am still subscribed to the missing one and I still get daily downloads to my computer. I can see it in my podcast directory on my computer and all the boxes are checked.
    Can anyone help?
    5G 60gb   Windows XP Pro  

    Check you iPod>Podcast settings. Is it set to only sync "unplayed podcasts" or "all podcasts".

  • How to : only one user in a branch can do the batch process at a time ?

    dear gurus,
    In ADF web application, accessed by multiple branch (20), there is a
    batch process to create invoices from orders. There are 3-5 users in a
    branch. one user can process about 30 - 50 orders to become
    invoices.
    Business rule is : In one batch process, each users must produce
    invoices with gapless invoice number. e.g : user_1 create 30 invoices
    no.001 - 030, user_2 create 40 invoices no.031-070 ... and so on...
    So we want to protect that at a time, in one branch, only one user can
    do the batch process. User_2 must wait until user_1 is done to start
    the process.
    We use the table below to maintain the latest invoice number created :
    CREATE TABLE doc_number
    DOC_TYPE VARCHAR2(6 BYTE) NOT NULL,
    BRANCH_CODE VARCHAR2(6 BYTE) NOT NULL,
    DOC_NBR NUMBER(12) DEFAULT 0,
    CONSTRAINT "DOC_NUMBER_PK" PRIMARY KEY (DOC_TYPE, BRANCH_CODE)
    The question is :
    I think of locking a spicific row of the doc_number table (select ...
    for update wait 10) at the beginning of the batch process stored
    procedure.
    But what if the session/connection left orphan and the row is lockde
    forever before the dba kill it ?
    So is there a better approach to limit the user execution of the
    process ?
    Thank you very much for your help,
    Krist

    Forget it. See http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4343369880986.
    However, if you are dead set on doing this old fashioned thing of trying to emulate paper invoices from a numbered tablet, you could always just let everyone generate all of their invoices with no invoice number whenever they want, then at some time ( say 21:00 every day), take a lock on the table and apply invoice numbers to all of the records with a null invoice number -- which will take only a few centiseconds at most. And let the users/system print only invoices that have numbers assigned. This way, you pretty much eliminate the concurrency issue of various branches generating invoices only in their time window -- yuk, what an awful way to have to do business.
    And completely forget about users or branches having their own range of numbers. That is completely nuts. Your database already knows which branch owns which invoice, right??

  • HT1420 how come only certain songs are authorized on my computer but it wont allow me to authroize others?

    some of the songs on my itunes libarary are saying they are "unorthized" therefore I cant play them, it tells me that I can only authorize five computers but when i try to find and delete other devices that are authroized it says that my computer is the only one.

    You need to restore the iPod on the new computer. You can only sync apps (and some other stuff) from different computers/libraries but you can manage music and some other stuff among different computers/libraries.
    You need to restore you iPod and see the following regarding the pairing error message.
    pairing record ?: Apple Support Communities
    A fix for those "Pairing Record Missing" errors | TUAW - The Unofficial Apple Weblog

  • How can only one Checkbox can be Selected in Table with Boolean CheckBoxes?

    I have an editable ADF table where one of the attributes is a Boolean Checkbox... and stores the value with Y or N.
    Is there any way where only one checkbox should be selected at the time of commit ?
    For example, in case its an Answers Table to a Single Choice Question of a Questionnaire application, while adding new answers to the table..., the user inserts 3 rows (answers)... then the boolean checkbox for only one of those 3 rows can be checked.
    Thanks
    DJ

    Thanks... I tried it by writing some code ... But it doesn't seem to work. Can you please have a look... and make the changes.
    public class checkBean {
    public void validateCheck(LaunchEvent launchEvent){
    BindingContext bctx1 = BindingContext.getCurrent();
    DCDataControl dc1 = bctx1.findDataControl("QuestionnaireAMDataControl");
    ApplicationModule service1 = (ApplicationModule)dc1.getDataProvider();
    ApplicationModule am1 = service1.findApplicationModule("QuestionnaireAM");
    ViewObject vo1 = am1.findViewObject("QuestionVO");
    String newValue = (String)vo1.getCurrentRow().getAttribute("QuestionTypeId");
    if(newValue.equals("10881")){
    System.out.println("Inside single");
    BindingContext bctx = BindingContext.getCurrent();
    DCDataControl dc = bctx.findDataControl("QuestionnaireAMDataControl");
    ApplicationModule service = (ApplicationModule)dc.getDataProvider();
    ApplicationModule am = service.findApplicationModule("QuestionnaireAM");
    ViewObject vo = am.findViewObject("QuestionResponseVO");
    int numRows;
    int j=0;
    numRows = vo.getRowCount();
    String rowValue = "a";
    int k = vo.getCurrentRowIndex();
    for (int i=0; i<numRows; i++){                   
    rowValue = (String)vo.getCurrentRow().getAttribute("CorrectResponseFlag");
    if(rowValue.equals("Y")){                           
    j++;
    if(j>1)
    System.out.println("same rows exist");
    FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, "Two correct respones!");
    FacesContext.getCurrentInstance().addMessage(null, msg);
    k++;
    vo.next();
    Thanks
    DJ

  • HT5517 When im doing an airplay how come only audio no video on the TV? and its showing to my iphone this device can only play sounds to airplay!

    When i'm doing airplay ther is no video only audio! and from my iphone its say this device can only play sound to airplay!!!

    what video are you trying to stream via airplay?
    currently only video from youtube app or ipod app is supported.
    any other app will only stream the audio.

  • Only one channel working when playing music via iTunes

    My Apple Tv has suddenly started only playing one music channel - ie depending on the song, you sometimes don't hear the lead vocal track, or perhaps drums. 
    It is linked to my computer over wireless, using plug-in wifi transmitters.  When I play the song on the computer using iTunes it is fine.  It is not a speaker cable problem as it happens when I play it just through my TV speaker.  If I then turn on my home cinema speaker system, all speakers work but only play the one channel.  I have looked at settings and can't find anything that would seem to cause this.
    Both Apple Tv and iTunes on the computer are up to date with the latest software.
    Anyone else experienced this problem, or any ideas on how to fix it?
    Thanks.

    Nocturno,
    What sound card do you have now? If your using a Creative sound card, you can turn on the CMSS feature to upmix Stereo to a 5.1/7.1 soundfield depending on the capability of the sound card. If your using another sound card, you will need to check with the manufacturer if it had such upmix features.
    JasonMessage Edited by Jason-CL on 02-14-2005 06:05 AM

  • How come My Apple TV won't play movies I just Rented?

    Every time I rent a movie on Apple TV  it successfully purchases but when I go to play the movie (on the same day) it will allow me to start loading it, then in the middle of the proccess of loading it says 'erorr occurred - please try again later'. I've tried again later even the next day but the same thing... I would like to know if there is any solution? HELP PLEASE!!!!!
    ALSO. I've tried to see if it was just a one time thing, so i bought a second movie and it still happened.
    Darren68

    Actually I had the same problem last week with my first rental through AppleTv. I ended up calling Apple, and it turns out my internet speed was too slow to allow the unit to "recognise" the "content" (make sense?). In other words, it was making the unit basically say "what? We can't do this, it will take too long (days and days apparently)" so in MY words: it threw out the content that I was trying to download.
    They advised I either up my internet connection speed through my provider, or only try to download SD content.

  • How come multiple audiotags in ebook can play all together in the last version of ibooks and ios6 while before they fade eachother when play key is pressed ?

    in ipad1 with ios5.1.1 and latest ibooks app audiotags stop the last music played when the new music starts
    in ipad3 with ios6 and latest ibooks let all the music play together with a resulting mess
    in ipad2 with ios6  ibooks fade the last tag that is playing when the play key is pressed in the new audiotag

    Gah. So It looks like the first version of the song on your iPod is the definitive version of a song (as is the case in iTunes). So in order to ensure that the version you want plays, you have to:
    1. make that the only version in iTunes (or first in the file structure)
    2. update Genius
    3. sync your iPod
    BOO. Too much work (I'm still going to do it though...)
    I would really like a feature that allowed you to specify which song would be chosen (the existing rating system would seem to be easiest).
    Another solution I thought of still requires a lot of work. This is assuming you prefer It would go something like this:
    1. Create an directory structure at the root of your library that would prioritize tracks, such as:
    a) Albums (for full length albums)
    b) Collections (for best ofs etc.)
    c) EPs (for singles or remix albums)
    e) Live Performances
    -assuming you prefer album versions over remixes over live versions, or more directly:
    a) High Priority
    b) Low Priority
    2. Place Each Album or individual tracks in their appropriate folder.
    3. Reset your iPod
    4. Sync
    The directory structure will intrinsically place higher priority versions on you iPod first, making them a priority version there. Pain in the...

  • How come only half of my 250 gig firewire drive is available?

    i just installed a new Samsung 250 gig IDE drive into a firewire enclosure. I know that there will be some overhead for formatting and such, but only 127.8 gig is available out of 250 gig. Am I missing something or is this normal. How can I get it to recognize the entire drive?

    How old is that enclosure? Sounds like it has an ATA controller inside that doesn't have support for 48 bit addressing and can only address 128 gigabytes.
    Send it back and get an enclosure that supports the ATA-6 48 bit addressing standard or don't use a drive larger than 128 gigabytes in it.

Maybe you are looking for