How come since updating to ios 6.1.2 AOL emails are not being pushed?
Since updating the only way my iphone 4s receives emails is by manually checking. How do I fix this???
try deleting the account and re-adding it.
Similar Messages
-
How Come, after updating to ios 6 iPhoto no longer supports photo streaming What happened?
How Come, after updating to ios 6 iPhoto no longer supports photo streaming? What happened?
You probably just need to re-enable Photo Stream. It's not clear what the difference is, but there is an option to enable Photo Stream (as well as Shared Photo Stream) in both the iCloud Settings and the Photos & Camera Settings.
-Doug -
I just update to iOS 7 on my iPhone 4s. The calendars on my iPhone are not keeping the information on the days that should be marked. The info is there in my iCloud on my computer, just not on my phone. Has anyone else had the same problem and what can I do about it? Is it at bug in the iOS 7 update?
What do you mean by "on the days that should be marked"? Are you calendar events displayed on the wrong days?
-
Updated to iOS 8.1- sent emails are not being received
I updated to iOS 8.1 and have now found that when I send emails from my iPhone (a 5S), the only place they arrive is on that same iPhone. I run Yosemite on my Mac, and the emails I send from the iPhone don't arrive, and I send them to others with different systems and they don't get them either.
I noticed that there were many people who reported this back when they updated to iOS 7, although I never had that problem. Nor did I have it under iOS 8 until I did the 8.1 update.No longer a problem. The emails I sent finally showed up.
-
Since updating to iOS 6 many of my apps are crashing
Since I have updated my iPhone 4s to iOS 6, 6.0.1 and now to the latest, I have noticed that a few of my applications are generating errors.
Typically they are EXC_BAD_ACCESS(blah)
KERN_INVALID_ADDRESS at address
Some applications I cannot even open any longer.
What gives? What changed in iOS 6 that would have caused such a change in state for my device? It could be that the applications are just faulty and that I happen to have just a bad batch. Also, it could be that they were faulty prior to this too - actually I never looked at the error data before. It was not until I could not open an application, Skylanders Lost Island, that I went searching there, and found a few other programs faulting.
Perhaps the new iOS just better exposed flaws in their programming.
I have tried hard resets on the device where I have deleted all the applications are restored data. But that has not corrected the data. I have tried restoring factory defaults as well. None of this has corrected the problem.
Is there anything that can be done from the user level to resolve these types of issues? Or is my only recourse with the developer of the apps?
Also, what happens with crash data when it is submitted?
Thank you.
Dani too had the similar problem after updating my iphone 4 to IOS6. Few of my contacts are missing. But it is shown in another app "Groups" which i had used to group my contacts. Now i am accessing the missed contacts through this app. Anyone could help me to restore or transfer these missed contacts from groups to my "Phone Contacts"? i havent sync my contacts to my computer or cloud.
-
I'm setting up a new 5C, want to make sure my calendar transfers over. Doesn't show up in the icloud site, no appointments. What am i missing?
Make sure you are entering events on an iCloud calendar, and not the On My iPhone (iPad) calendar or on a calendar from an external account such as Gmail (Google), Yahoo, or and exchange account. Only your iCloud calendar will sync with iCloud.
-
How do I access mail through the cloud that is on my iPad but not pushed to the iMac?
There is a forum for iCloud on my Mac, I would recommend posting there or iCloud on IOS devices forum.
-
I recently purchased time capsule to upgrade my wireless system. I have 3 airport expresses in my network; I was able to reconfigure one, but the other 2 won't reconfigure. They are not recognized by Airport utility after being reset; the time capsule and one reconfigured airport express shows up. I would like to use the other two airport expresses to extend my wireless system. I would appreciate any help and suggestions.
Unfortunately, you will have to use Apple's WDS setting for all of the devices on the network....Time Capsule, new AirPort Express and older AirPort Express devices.
That is going to slow things down tremendously on the network.
WDS only operates at "g" wireless speed, so you lose any "n" speed advantage of your newer devices.
Worse, the bandwidth is cut in half on the entire network for each device that is set up as "relay" or "remote" on the system.
So, the first "remote" (or relay) cuts wireless speed from 54 Mbps down to 27 Mbps. The second cuts everything down to about 14 Mbps and the third drops everything down to about 7 Mpbs. That is much slower than the old wireless "b" systems.
Compare that to "n" speeds of 130 Mbps or up to 300 Mbps (if you are using 5 GHz) and you can easily see that you are losing more than 90% of the speed capability on the network.
Do you even want to consider doing this? -
Since update to iOS 7, every time I open an app a pop up message telling me to connect to iTunes to use push notifications comes up. EVERY TIME! How do I make it stop???
Do you use iTunes with your iPad and if so, have you tried syncing your iPad with iTunes since you updated the iOS?
-
Since updating the IOs platform pop up advertising is appearing everywhere how do i stop it?
Since updating the IOs platform pop up advertising is appearing everywhere how do i stop it?
You may have installed a variant of the "VSearch" ad-injection malware.
Malware is always changing to get around the defenses against it. These instructions are valid as of today, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
com.something.daemon.plist
and
com.something.helper.plist
Here something is a variable word, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes the word is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
com.something.agent.plist
where the word something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
something
where something is the same word you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
Dear all,
I am new to this community even though I have been a Apple user for years, so please forgive me if this question is not in the right section.
Has anyone encountered drastic shorter battery life both on iphone 5 and ipad since updating to iOS 6.1.2? I've always been happy with these two products until the update - now the battery life is considerably shorter which is extremely frustrating.
How can this problem be solved? Is there any way to go back to the previous version?
Thanks for your help.If you update using iTunes the phone is first wiped clean, then the new OS is installed, and finally the backup is restored. After this finishes if you sync your music should be restored. Music is not in the backup, because it is already on your computer and duplicating it would use up a lot of hard disk space.
An OTA update just patches what has changed; it does not disturb content. -
How do i update my iOS 6.0.1 to iOS 7.1? As I've never updated my phone since buying from a friend and my phone won't allow me to update to iOS 8??
An iPhone 4S can only be updated directly to iOS 8.1.2. You need to resolve the issue which prevents you from updating to it instead of attempting to install an intermediate version.
(118161) -
Im trying to restore my iphone 3G, i used itunes to restore it so it downloaded the iOS, after that it gives me the error 1015, when i read about the error then it tells me that i was downgrading, but how come since i used itunes to restore? why didnt it automatically provide me with the latest software made perfectly for the iPhone?
Your phone was jailbroken. You can't get help here.
In VERY RARE circumstances, this may indicate a hardware failure. -
Since updating to iOS 6.0, my Facebook and instagram both don't work. Any ideas as to why and how it can be fixed ASAP?
Since updating to iOS 6.0, my Facebook and instagram both don't work. Any ideas as to why and how it can be fixed ASAP?
-
Since I updated to iOS 8.0.2 my iPad has not been working properly. It freezes in the middle of things. It cuts out when I'm browsing. It's slow when I. Typing and more how do I sort it
Hello Jm23ur,
After reading your post, it sounds like you are experiencing performance issues with your device. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
Turn your iOS device off and on (restart) and reset
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities,
BobbyD
Maybe you are looking for
-
Printing Page numbers in ALV grid with oops
Hi , I have a ALV grid display with OOPS , there are also fields in top of page and end of page that go along with the print. I want to print the page numbers also . If I give a variable and increment it along with every call to top of page , then if
-
Inches as unit of measure causes leading problems
In Freehand MX 11.0.2 for Windows (using winxp sp2), I cannot select inches as my unit of measurement without causing serious leading issues. If I set type at 10 point with 12 point leading, the program will convert the leading to 12 inches, making i
-
Exporting procedures using sql developer
Hi, I successfully migrated a mysql database to the oracle database using sql developer.All the data excluding procedures were moved to oracle. I dont know why but none of the procedures were moved to oracle. Now, i want to move those procedures to o
-
Using "Reports" in Studio 11.3
I am trying to run a report that will list all of the field level rules for a group of sections. In Studio 11.3, I select Manage/Tools/Reports and then pick the Section Report. Regardless if I pick "Select All" or "Browse" and pick a range of section
-
Snippet: "query" the chart history length programmatically
Would have posted to this thread, but was concerned that the misspelled subject might keep it from being found by future searches. I have a brute force, inelegant, very mildliy tested workaround for programmatically determining the history length of