How come sometimes the 'pointer' disappears while i'm moving it on my browser and i have to scroll through stuff to see see it again... software problem?

The pointer icon does not show when i move my touchpad though it still hovers over tabs and clicks it but you can't see the pointer so you move randomlly, thus i have to wait several minutes or swipe around before I can see it again. How do I fix it?

There is a native Netflix app on Apple TV. If you are attempting to use a VPN via MBP then that is not supported.

Similar Messages

  • Why doesn't the PS CC font preview show font families any more? Now i have to scroll through 4,400 fonts every time!

    why doesn't the PS CC font preview show font families any more? Now i have to scroll through 4,400 fonts every time!

    You mean font previews themselves in the list? You can set the size and disable via Type > Font Preview Size.

  • How come sometimes the Ken Burns effect allows you to edit the entire picture, and other times it automatically starts at a smaller section of the photo?

    How come, in imovie, when adding the Ken Burns effect to a still photo, sometimes the phoo appears as the full size, and other times, the green and red ken burns boxes appear only on a smaller portion of the picture? I want to be able to Ken Burns a bigger chunk of a picture, but often times it is as if there is a pre-set for just how much the Ken Burns will cover.

    Is it possible that the ones that have small boxes are in Portrait while the ones with large boxes are in Landscape?
    If so, you can get bigger boxes on the Portrait ones by clicking "Allow Black" in iMovie 11. (iMovie 09 did not have this feature.)

  • How come my safari windows disappear when I close my laptop and open again? The safari windows I wanted to keep running for the next time I open my laptop disappeared. Why? Help me.

    How come my safari windows disappear when I close my laptop and open again? The safari windows I wanted to keep running for the next time I open my laptop disappeared. Why? Help me.

    Important note, do NOT sleep your macbook Air with headphones attached until this is resolved.
    Ive done a good best of testing on same to confirm not to do that
    also if you have the APP "BOOM" installed........ remove it

  • How come an exclamation point is next to the song how do i fix this

    how come an exclamation point is next to the song how do i fix this

    The exclamation mark means that iTunes is unable to find the track on your HD. If you click on it a dialogue box should appear inviting you to locate the file manually. You should only have to do that once.
    In my experience this usually happens if the downloaded file is moved to another location on the HD, if the name is changed or if the file has been deleted.
    I have always moved my iTunes files to other locations on the desktop and de-selected the"Copy files to iTunes media folder when adding to library". That option is found under the Advanced tab of the Preferences.
    I move the folders into  iTunes from the the new locations on the desktop.
    It doesn't have to be done that way of course, it's just the way I like to do it.

  • How to specify the target name while deploying a code in OSB-- Plz Help

    Hi all,
    Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
    Regards
    Prabhu

    Hi Prabhu,
    There are three kind of server architecture possible for OSB -
    1. Single server - Everything gets deployed on Admin server itself
    2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
    3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
    Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
    You may refer-
    http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
    Regards,
    Anuj

  • How to Reward the Points

    Dear all,
    i am new in this forum. can any one tell me how to reward the points?
    atul

    Atul,
    <b>How to give points:</b>
    1. Mark your thread as a question while creating it.
    2. In the answers you get, you can assign the points by clicking on the stars to the left.
    <b>You also get a point yourself for rewarding (one per thread).</b>
    Regards,
    Prasobh

  • How come all my contacts disappeared

    how come all my contacts disappeared when I sync my iphone4?

    Is ur iTunes under your devices, the info tab checked Sync Contacts with ?

  • How Come on the zen xtra

    How come on the zen xtra there is no "top 25 played" playslit or anything like that. i was recently playing around with a micro and i saw that there were playlist like that on the player. Can anyone answer that question for me?

    I have been experiencing some extraordinary behavior with my Xtra. It seems to be deliberately choosing music for me based on genre, title info, even subject matter, when I randomize all tracks. This is no joke! The **bleep** thing knows my music better than I do, and some of the time it seems to be making fun, or even historical points, with some of my musical tracks. This could be a coincidence but with 5000 tracks representing every musical genre known it isn't likely. Could the firmware be capable of making these decisions based on track-tagging? I don't know. But it has made for some very interesting listening sessions.

  • How come my junk email disappears when I open it? for my .me email account

    how come my junk email disappears when I open it? for my .me email account

    Roadrunner is POP email, and the feature you are looking for
    is a function of IMAP email. Roadrunner has not announced
    any plans to make IMAP available. If this is important to you,
    get a gmail account (which can be setup as IMAP)  and configure
    your Roadrunner account to automatically forward emails to the
    gmail account.

  • How come sometimes my iPod Touch gets stuck updating an app and then just deletes it?

    How come sometimes my iPod Touch gets stuck updating an app and then just deletes it instead?
    The update bar on the app gets stuck on empty and then the next time I sync the app gets deleted.
    It is really annoying to lose all my data when updating an app, and it has happend more than once!
    Any idea why it does this? I am scared to update my favorite apps for fear that they could be deleted.
    -Sam

    I never had an app being deleted.  You can always udate the app on the computer and then sync.

  • How come, that the shadow of an object on one layer effects the view of an image, that is on a different layer

    one layer has a shadow - on a second layer I have my image - how come, that  the image-view is effected by the shadow of an object of a different layer? is this only a view-effect or does this effects the prints as well? if so, how can I change it?
    thanks for advice!
    angelika

    Basic rule is that transparent object affects other objects behind it. So if you bring some object to front of transparent object (or upper layer), transparency flatteners doesn´t flatten it during transparency flattening. There are some exceptions to that rule, but I almost categorize those as bugs...
    Use Window>Output>Flattener Preview panel to see which objects are affected...
    If you export PDF, it makes a difference if you use PDF1.3 as compatibility. Using that PDF-version triggers Transparency Flattener and resulting PDF has no live transparency. All the other compatibility options preserve live transparencies....
    http://www.adobe.com/products/creativesuite/pdfs/dgt.pdf is quite good white paper about transparencies in CS softwares, it´s a bit old but most of the things have not changed since CS2...

  • How to give the points??

    hi all
    pls let me tell how to give the point to our friends??

    please check the rules engagement found in the begining of the questions page. Out of that the 4 th step is the following.
    Step 4: Thank Others by Giving Points
    SDN/BPX has a Contributor Recognition Program. Which in short text means that for each question you have 10 points, which can be given to the person that answers your question. 6 & 2 points should also be given for helpful answers. For every question you later award points for, you in turn receive 1 point for.
    you would find three radio buttons on the left hand side of your query with marked with 3 colors. Choose the suitable one based on the merit of the answer.
    regards
    sadhu kishore

  • How come sometimes it takes long to send a text message?

    How come sometimes it takes a long time to send a text message?

    No my iPhone does not freez it just say sending then takes along time could it be because I have sprint, I have 3 or 4 bars

  • How to handle the table control While working with LSMW?

    How to handle the table control While working with LSMW?

    its possible in lsmw,
    Hi,
    LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
    check that single charecter field, it that is X that means the header record is processed, and do the items.
    and, this is another way, try this out also
    YOu can do this in "Define Source Structures" step,
    the HEADER is defined first,
    then the DETAIL below the HEADER.
    add the fields to the structures.
    Both should have some common key field
    Please take care that the name of the common field is the same.
    Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
    Thanks

Maybe you are looking for

  • Confirmation Control Key Should be mandatory for PO document type

    Hi All, I want to know, is there any configuration settings to make mandatory "confirmation control key" for the Particular Purchasing document type's. If it is not there what should be the best to achieve this requirement. Thanks in Advance, Shankar

  • Oracle 10gR2 installation on Redhat 5 hangs on 12%

    Dear experts I'm installing a 2 node Oracle 10gR2 on Redhat 5. Everything is ok when installing Oracle Clusterware and it works fine with all the services up and running. But when I start installing the Oracle Database, OUI hangs on 12%. I found coup

  • Please vote using the forum poll!

    At the right side of this forum page, you will find a forum poll "Do you generate UIX or JSP pages with JHeadstart?". Please vote, this information is important for us with regards to future upgrades to JSF / ADF Faces. You can vote one time for each

  • Need help with a decimal align tab script for CS5

    I have a list that consists of 6 tabbed headers in helvetica bold, followed by a list of numbers that should right align under the headers, and these need to be in helvetica regular. The list is currently in arial font. Is it possible to change both

  • CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'

    Dear Experts, I hv created a report using ALV. Problem is ,  until I call "CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'" function module, my internal table is sorted fine. but after this function module ( i hv seen in debug mode) , the sort order is gettin