How come when i sync my iphone5 to laptop window 7 it will shut down , but when m using ipad it will not shut down
how come when i sync my iphone5 to laptop window 7 it will shut down , but when m using ipad it will not shut down, so it means th problem is my iphone5
Hello vina8sy,
After reviewing your post, it sounds like the iPhone will turn off after a sync but the iPad will not. I would recommend that you read this article, it may be able to help the issue.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario
Similar Messages
-
I have looked at loads of sites and there is no information for how i can do it
In itune did you play any of the songs downloaded. If so plug your ipod back in an manualy check off to sync all music. If that doesn't work you might have to restore the ipod.
-
When I sync my iPhone5 with my Macbook Pro I get the following message "iTunes could not sync calendars to the iPhone because the iPhone disconnected". The strange this is that the phone did not disconnect because it sync my contacts and is charging.
Why does this happen? I have tried several cables and it does the same thing.Try:
https://discussions.apple.com/message/15519179#15519179 -
Have changed my apple Id to a new email address. its all working fine on my PC and also on come up with the new ID on my icloud page on my iphone but when i try to buy something from itunes etc on my phone, the log in box still contains the old id.
how do i change this?The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
It doesn't sound like you "changed" your Apple ID, sounds like you created a new one. Bad idea. All content bought with an Apple ID is forever tied to that ID. The ID that bought the content is the only ID that can update the content. Apple does not merge IDs not does Apple transfer content from one ID to another. -
Question:
When I sync with my iphone I get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open. This continues until I quit Entourage. How do I turn this message off? It interferes with any other work I am doing. I appreciate any suggestions.I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck. -
when i sync my iphone5 on my computer with itune the last part does not stop sync download safari i dont know why is not stop sync and i cant stop it i am try to download some song and this thing cant stop sync help?
Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn -
when I sync my iPhone5 with my macbook pro in photos I don't get the same faces as on the computer, it picks up any random face
Interesting observation. Thanks for sharing.
Did you have a technical support question? -
I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!
Hi MyAppleID99,
You may want to check to make sure the clip hasn't been moved back and forth between wide screen and standard aspect ratios; sometimes a combination of letterboxing and pillarboxing can lead to a black frame "windowbox" when playing the final video. You may find the following article helpful:
Apple Support: What are Letterboxing, Pillarboxing and Windowboxing?
http://support.apple.com/kb/ht2320
Regards,
- Brenden -
How do I enable my iPod? I am trying to update the apps but when I click "Update All", a pop up "Your Apple ID has been disabled." How do I change it so I can enable my iPod? My iPod is not locked (I know my password), but I just can't figure out how to enable it. Thanks.
This may help:
http://support.apple.com/kb/ts2446 -
BLS' iMac 3.60GHz Intel Mac - OS X 10.6.7 - Pages 4.0.5…
How come I (the Admiistrator) can Read & Write the majority of my Pages archives but not write on random paragraphs?So what happens when you try to edit this information?
For example:
You have a document...
klasdfl;kasdfl;kjasd;lfkja;slkfja;sldkfj;alskdjf;laksdjfl;kj
klasdfl;kasdfl;kjasd;lfkja;slkfja;sldkfj;alskdjf;laksdjfl;kj
klasdfl;kasdfl;kjasd;lfkja;slkfja;sldkfj;alskdjf;laksdjfl;kj
klasdfl;kasdfl;kjasd;lfkja;slkfja;sldkfj;alskdjf;laksdjfl;kj
jkjklioiouijo32904213904902349023904902390902390
jkjklioiouijo32904213904902349023904902390902390
jkjklioiouijo32904213904902349023904902390902390
jkjklioiouijo32904213904902349023904902390902390
Would you be able to highlight the second paragraph? (not in my post obviously)
If so, what happens? -
I bought an app for my iPhone, I changed my PC for a Mac and when I sync it erase my app, I want to downloaded again but it says that I have to pay again what can I do?
How are you trying to re-download it, from within the store or the Purchased link ? You should be able to redownload it for free via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
-
i have some really old pics on my macbook and want to delete them.. but when i remove them they go to my 'trash' then i delete them from there they will go! but when i turn on my laptop next time there all there again how do i remove perminatly?
You remove them the same way you put them there. The sync process.
Deselect them in itunes and sync. -
Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you
Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply. -
When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?
Skimming the templates in the Template Chooser shows you all of the pages available in the template once you open it. You can insert the one(s) you want, even more than one of any of them. Most users don't want or need all of the different pages, especially when they start the document.
-
when I drag a picture into my imovie it creates a thumbnail but when it plays over it, it shows the picture in front of it and not the picture...and when I go to crop adjustments it shows a black screen. How do I fix this?
I had a similar problem, and i found that the photo was of very low resoluton. As a test I resized the image to a lrager resolution using photoshop CS4 and re saved it as JPG. I imported the new saved image and it seem to have fixed the problem.
Maybe you are looking for
-
My Macbook Pro won't boot from External HD
Could anyone out there, maybe Ned or Peter who helped me last time tell me why it wont boot from an image i have loaded onto the HD? I managed to restore the image onto the HD using disk utility but when i press the power button and hold down 'Alt' i
-
New hard drive and have a question about photo stream.
My hard drive recently crashed. I have a new hard drive and am trying to organize my iphoto again. There are 1,000 photos on my iphone (photo stream) how do I get these onto my mac? My mac only has the last 30 days. Do I have to save each individ
-
Hi SAP Gurus, i have some basic Quires to be clarified regarding WEB DMS, Does Accessing documents through WEB DMS Documents require SAP Logon ID and Password, as i tried opening up the WEB DMS Link in different user System of my clients, but it did
-
Hi, I am new to administration and using Datapump for the first time. My question might sound silly.. Here is my requirement. I have 2 tables sarath9700.table1 and test_rep.table1 in the same schema. I was asked to export import data from sarath9700.
-
90% scaling not showing up on DVD after compression
Hi, i have had to scale my clips at 90% using the motion tab in FCP 5. As a test I compressed the 20min film nad all of the motion scaling was no longer there? What is that about, also I have been working in 3:2 apsect ratio but nothing in compressor