How comes that, having everybody issues with infinitely long backups (combining mountain lion on new imac and time capsule) apple doesn't fix it? (my time machine forecasts not less than 6/8 days to complete the first one, 350 gig transferred from a pc,).
Within 6 days someone will switch off the machine, or power will go off, or some error will occur. I will have a backup when I'll have to replace this new Imac....
Always do the first backup at least over ethernet.. even if you have to use the TC in complete isolation from the network. You should be able to do that backup in about 6-8hours, ie overnight.
The setup is easy.. in complete isolation.. if you have no ethernet from the imac.. just use a short patch lead.. plug LAN port of the TC into the iMac. Turn off wireless in the imac. Make sure the airport utiity can locate the TC, if not press reset on the TC and it will go back to router mode.. ignore all the errors .. just locate the hard disk is working.. start up TM and point it to the TC.. do the backup.
Once this backup is done.. the hourly incrementals over wireless should take just a couple of minutes. Although if you are manipulating very large files then you may need to consider getting better connection, either using 5ghz wireless which is much faster but might need extender.. or ethernet or ethernet over power type adapters.
Similar Messages
-
Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki LapanThank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!! -
Hello! I lost my iphone like a month ago, well I reported that phone as lost with my icloud account, now I got a new iphone and I would like to know if I can use that same icloud account with this new phone? The old one will stay reported?
Thank you. The old one will stay reported?
-
I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?
Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I own a copy of CS5.5 that I have on my PC. I have switched to a new iMac and during activation it says that my serial number is not for the product I'm trying to activate. I have tried live chat a couple times but it says that chat is not available.
Jb4short you can verify your registered serial number under your account at http://www.adobe.com/. You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
If you have a volume license serial number then you need to download the volume license installation files from https://licensing.adobe.com/. -
Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.
Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.
-
I downloaded Mountain Lion to my IMac and MacPro today, since the download, I am unable to play on-line games in Safari. On-line game is not connecting due to the https encryption. How do I resolve this?
Also the touch screen does not seem to be responding adequately. Thank you for any help you can give.
-
Hello- I recently upgraded to OS Mountain Lion on my iMac and cannot download the most current version of Adobe Flash Player. I even uninstalled the old Flash version but this did not resolve the issue. Could somebody please assist? Thank you.
Hello- I was able to resolve the issue after clicking on the top right hand corner that shows the recent downloads (it has that down arrow). I realized that I had tried downloading the Adobe Flash Player Install Manager about 7 times, but still needed to click on the file and install! So I erased all the duplicates and installed one of the Flash Player Install Managers and it finally worked! Yay!
-
After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...
I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC: Enabled
DIMM Riser B/DIMM 1:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000463732353642363145353830304600
Serial Number: 0x00000000
DIMM Riser B/DIMM 2:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000463732353642363145353830304600
Serial Number: 0x00000000
DIMM Riser A/DIMM 1:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x42076007
DIMM Riser A/DIMM 2:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x4207631E
DIMM Riser B/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser B/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty -
well as the title says i have a 500gb hard drive with 2 partitions one with time machine and one for files it worked perefectly until yesterday only the time machine partition appeared in finder, i checked disk utility and both partitions appeared but the one for files appeared in grey and when i press mount an error comes up.
The repair shop likely replaced a major circuit board on your MacBook Pro, so Time Machine thinks that you have a "new" computer and it wants to make a new complete backup of your Mac.
You are going to have to make a decision to either add another new Time Capsule....or USB drive to your existing Time Capsule....and in effect start over with a new backup of your Mac and then move forward again.
For "most" users, I think this is probably the best plan because you preserve all your old backups in case you need them at some point, and you start over again with a new Time Capsule so you have plenty of room for years of new backups.
Or, as you have mentioned, you have the option of erasing the Time Capsule drive and starting all over again. The upside is that you start over and have plenty of room for new backups. The downside is that you lose years of backups.
Another option....trying to manually delete old backups individually....is tricky business....and very time consuming. To get an idea of what is involved here, study this FAQ by Pondini, our resident Time Capsule and Time Machine expert on the Community Support area. In particular, study the pink box.
http://web.me.com/pondini/Time_Machine/12.html
Once you look through this, I think you may agree that this type of surgery is not for the faint of heart. I would suggest that you consider this only if one of the other options just cannot work for you. -
Transferring to new iMac via time machine - how to use Ethernet?
Hi, I am setting up a new iMac and transferring my files from my MacBook (2007) using time machine. I started the transfer wirelessly (foolishly) but it predicted it would take 36 hours. With the transfer still happening I have now attached an Ethernet cable but the countdown is the same, presumably because the wireless transfer is still taking priority.
Is it risky to abandon the transfer midway through? If not, once I have stopped it, how do I ensure the ethernet takes priority, considering that I am still at the very early stages of iMac setup (so have not gone through to the normal home screen etc)?
Another issue is that the screen seems to sleep every 30 mins, so I am not sure the wireless transfer will keep progressing overnight...?
Many thanks in advance for any pointers.Receiving Code 150:30 lead me to the following Adobe link...
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
This Adobe page provides an app (LicenseRecovery 11.6.1), supposedly designed to reinstate a licensing issue. When I opened the file, and tried to open the app that's suggested on this page, the program hung. I assumed the app hadn't been updated for Mountain Lion.
Wouldthis app address the issue if it had worked? -
Connection with iMac and Time Machine VERY slow
People
For the past of couple of days the connection with my iMac and Time Capsule has gone askew. The iMac shows the wireless connection at 5GHz with a transmit rate over 200. However, internet is slow and backing up about 300mb is in its 24th hour and it's only reached 180mb.
I don't understand what may have happened. The two machines have been best mates for a long time and now something's gone wrong. The only thing I did a couple of days ago is install the Update for the Apple Magic Mouse.
On the other hand, my MacBook, which also have the Magic Mouse update, has not trouble with internet speed - wireless, once again - and the Time Machine backups are happening without a hitch.
I bit the bullet and turned off the Time Machine and rebooted it. Unfortunately, it's made no difference.
Does anybody have any suggestions?Both your 5 GHz band and the guest band have the same SSID unless you have assigned separate names to them. I think it's much easier to identify them if they have separate names of your choice.
If you have a separate name for the guest 2.4 GHz band, click on the Airport icon at the top of your screen and then click "Join other network". The 2.4 GHz band should appear as a choice and you can connect to it.
I'm using Leopard, not Snow Leopard so I don't know if things display the same way on our operating system. If you want your computer to connect to a given network:
Click System Preferences, then Network.
Click the AirPort connection on the left and then click the Advanced button at the lower right. You can drag the network that you want your computer to connect to first to the top of the list. -
I have not had any issue with Itunes on my PC until very recently. Every now and then my Itunes library appears on my screen? I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch? Why does this happen please as it is driving me crazy!.
What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)
-
I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.
-
I turned on my new iMac for the first time today and set it up using a backup on Time Machine from my old Macbook, which is running OS X 10.9.5 and has iPhoto version 8.1.2. When I went to open iPhoto on the new computer, it said I had to update the photos to work with the new version. Now, my photos from part of July 26, 2014 and onwards do not show up in the new iPhoto. The albums and spaces for the photos are there, but only a gray triangle with exclamation point shows in their place. Every other photo from 2003 to half of July 26, 2014 appears to have updated without issue. None of the fixes/rebuilds I tried worked. When I open up TimeMachine, it has no backups that I can use for the new computer (perhaps, because I wanted to still have access to use my old backups for my old laptop so told it not to use them for the new computer). My most recent half a year's photos are the ones I need the most. How do I make them appear on my new iMac?
Do you still have the old Mac? Then check, if the iPhoto Library has the newer events from July 26 onwards.
If yes, copy the iPhoto library from the old Mac to the new mac by connecting both computers. And then try to upgrade the copied library.
If you no longer have access to the old mac, you could try to inherit the backup of the old Mac and try to restore the iPhoto Library from it.
See Pondini's FAQ: http://pondini.org/TM/B6.html
Maybe you are looking for
-
How to do budgeting at activity level and WBS element level in project syst
Dear GURU's, Can any one please suggest me how to do budgeting at activity level and WBS element level in project systems, friends please I required set by step process. I need how to do this configuration to map this scenario. Regards, Bhanu
-
I am trying to update to i-tunes 11.3 but when I download I get a message that itunes didn't install properly, and a reference to error 127. Any ideas?
-
1. Is there any documentation available on the best practices for implementing iPayment with Oracle AR and iStore? 2. Is there a US law which prohibits internet credit card payment prcoessors from sending line level payment data to internet merchants
-
Valueholderinterface - Many-to-Many mapping problem
Hi i have two tables users and teams and i have created many-to-many relationship between two table through intermediated(users_teams) table. Here user can have many teams and team can have many users.But the following exception i m getting while get
-
Safari Simple Finder Parental Control
I set up a Simple Finder type account for my son on my iMac. Tried to configure Safari but couldn't get anywhere as: a) when I launched Safari, it appeared without any windows open b) nothing happens when I select 'New Window' from the file menu in S