How config release strategy by materia type.

Hello... Help me...
I want to PO Release by material type(MTART), but in CEKKO, there is no MTART.
So I use user-exit EXIT_SAPLEBND_002-ZXM06U22.
But I didn't config PO release by material type.
I set characteristic-additional data  Table name : CEKKO, Field name : LBLIF.
What is wrong this user-exit program? (If material type = ZROH' --> PO Release)
  DATA IS_BEKPO TYPE BEKPO.
  move-corresponding i_cekko to e_cekko.
  LOOP AT IT_BEKPO INTO IS_BEKPO.
    IF IS_BEKPO-MTART = 'ZROH'.  
       MOVE IS_BEKPO-MTART TO  E_CEKKO-LBLIF.
    ENDIF.
  ENDLOOP.
Edited by: maro Kim on Oct 29, 2010 11:52 AM

Hi,
For PO's, only header level release is possible. There is no item level release possible.
Material type is item level data. That's why using material type, you can't configer release strategy for the PO's.
Regards
KRK

Similar Messages

  • Release strategy against material type

    Hi
    Our customer requires a separate to group of people to release Raw Material POs and a person to release Spare Parts related POs. How can I set release strategy according to material type?

    Hi,
    These 2 purchases (Raw Mat & Spare Parts), are they being purchased by the same Purchasing Group?
    If different, you can use Purchasing group as a classification in your release strategy.
    Or Material Groups as a classification?
    Currently, i dont know if there is a way to differentiate between material types in PO for your release classification.
    Maybe you can use Exit to control CEBAN-USRC1 where, It includes the first few characters of your material number range.
    Im assuming that you have:
    1) SP001001 for Spare parts
    2) RM001001 for Raw Materials
    So you can use SP, for Spare parts release strategy and RM for Raw Materials Release Strategy.
    Im not sure if this works, just an idea.

  • How do i get the material type after submitting a create material request?

    Hi All,
    I have to select an agent depending on the material type of the material being created? I'm not using the rule based workflow for material creation in MDG 7.0, I'm using WS46000057. How do I get the material type being used in the workflow so that I can create a rule and select an agent accordingly from a custom table.
    Any kind of help would be sincerely appreciated.
    Regards,
    Tushar..

    Why not use the rule-based workflow template?
    Where do you want the material type? This is a standard workflow template and I'm not sure you can enhance it.
    In any case, in order to read CR details, you need to use the MDG API classes. These are described in this document: Master Data Governance Application Programming Interface Guide. Keep in mind that different API classes were developed for different releases so make sure to pick the class right for your release.

  • PR release procedure for material types

    Hi all,
    I have a question, I created new release procedure for combination :
    1. NB pur.requsition, purchasing group + material type (let sey roh.. etc)
    2. YNB pur.requsition, purchasing groups + material type (ZSTE-001, ZSTE-002, ZSTE-003).
    - 3 characteristcs for pur.groups, doc.type and material type.
    - 1 class
    - 2 release groups (E1 and P1)
    - For release group P1, In rel.strategy in classification I entered values for pur. requisition (NB), purchasing groups (001,002, 003 ect) and material types (ZUSL-001.. ect)
    - For release group E1, in rel. strategy in classification entered values
    values for pur. requisition (YNB), purchasing groups (001,002, 003 ect) and material types (ZSTE-001, ZSTE-002, ZSTE-003)
    So, problem is that if I enter pur.requisition YNB and material type ZSTE-001, needs release; if I add item with material type ZUSL-001, there is no release.
    How can I restrict the values so that is giving error if by mistake is entered between material types ZSTE-001, ZSTE-002, ZSTE-003 material type ZUSL-001 in document type YNB, which is not allowed to be entered?
    Thanks in advance,
    Anchi

    Hello
    In PR you can set up this release strategy without classification release strategy.
    w/o classification strategy you can define the release line item wise. so you can give diiff materual group you can enter with line item wise.
    Laxman

  • PR Release Strategy for DOCUMENT TYPE

    Hi Gurus,
    I have created a Document Type in PR & I want to set a Release Startegy for ONLY that Document Type.
    Can anybody explain me step by setp procedure for this ?, I have gone thru one link :
    http://www.sap123.com/showthread.php?t=59
    but I could not set the relase startegy. May be I am missing something ??
    Thanks & Regards,
    Vikas

    If you want to define the release strategy only for doc type
    then
    create the class using CL02
    create the chra for Doc type using CT04  - the table is CEBAN and the field is BSART
    then assign the doc type value in char (after you create the char then go back and assign the value)
    now assign your char to your class
    now go to SPRO and goto PR release strategy config -  procedure with classification
    go to Set Up Procedure with Classification
    create your release group by assigning the calss you have created (make sure this config should have only one class)
    create release code
    release indicator is already exist in sap so you don;t need to create
    create your release strategy and assign the value in classification tab of release strategy
    this will work
    but make sure that - if you are creating only for doc type means all the reqs created for this doc type will be blocked by the system. so if you have reqs like if this doc type and the amount >5000 then only block then you have to have amount is also you char in your class
    hope this will give you a cleat idea

  • Release strategy by document type wise

    in our current project we are prepare lot document type in PO. some document type i need release strategy some no need
    how i have assingn that
    pls explain the steps

    create a characteristic with CEKKO--BSART and assign the same in your class and further use this characteristic in your release strategy.
    regards,
    Indranil

  • PR release strategy with material group

    Hi Experts,
    Release strategy for Purchase requisition already configured with characteristics Document type and Total net order Value.
    For fulfill new requirement we have created New character with Material group.Our requirement is for Two material groups separate  release strategy has to be trigger and remaing other material groups old release strategy has to be trigger.For exple if X and Y are two material groups ,which require seperate release strategy.Other than X and Y material groups requir old release strategy.
      all the material groups assigned to character.Blank material group also assigned to the character.In release strategy level in classification view we have assigned two material groups( X and Y ) for separate release strategy and remaining  material groups and Blank material group to old release strategy.
       At the time of creation of PR if i give two  material groups ( X and Y)for different line items, seperate release strategy is not triggering, where as old release strategy is triggeringIf i create PR with single material group( X) for all line items it is triggering seperae release strategy properly.
       For other material groups (other then X and Y )with different line items it is triggering old release strategy properly.
          Kindly help me to resolve the problem.

    Hi,
    Please add Blank material group to the new release strategy also.
    Maruthi

  • How to handle gas cylinders material type

    HI Gurus OF MM,
           I want to create a material type as cylinder (ex.oxygene,acetlene cylinders for production ).
         Its is inwarded through stores and it is consumed by the Production activities(Cost center).After the utilisation( after cosuming
    ) he is returning it to stores as empty cylinders.
        Again frm stores its is returned to Vendor.
       How i could issue this material to the cost center and how i can get it back.
       How i could inward that material Through Purchase Order ???What is the procedure for PO also.
       Any movt type is their and if so suggest me in detailed way?
      Any one have faced this type of issues just share with me also.

    Rajesh
    Follow the below steps.
    01. Create Gas as Raw material
    02. Create Cylinder as RTP material ( LIEH)
    Create Purchase order for Vendor
    Post the GR with reference to Purchase order 101
    Click on Transport equipment icon (extreme right icon in the middle of screen) > enter material, qty, loc, vendor , for this movement type 501 M will trigger
    and Save the document
    You can see the returnable packaging cylinder in stock , and post reversals through movement type 502 M
    Hope this clarifies
    Thanks & Regards,
    Sridhar

  • PR release strategy for material group

    Hi,
    I have 2 different line items in PR with 2 different mat groups. How can I set up a release strategy for this scenario. Ex-line No 1 has mat group X and line item 2 has mat group Y. Do I release at header level or item wise release is possible

    Hello
    In PR you can set up this release strategy without classification release strategy.
    w/o classification strategy you can define the release line item wise. so you can give diiff materual group you can enter with line item wise.
    Laxman

  • How to release the blocked material from physical inventry

    hi,
    when i try do post goods issue ...i get this message
    Material blocked in physical  inventry.
    kindly help me.

    Hi,
    Use MI22 to find the open stock count document and either post the count (as suggested), or if the count is no longer require flag the inventory document as deleted in MI02 (if the count has been entered you can use MI07 to post the difference.
    But all of this should only be done if you have checked with whoever controls your stock counts.
    Steve B
    (Points not required)

  • Retriggering Release strategy for PR with Document Type, Company Code and Price Range as Characaterstics

    Hi Friends,
    I have a issue to fix. The issue is releated to PR.
    There are some PR's in the system which has wrong release strategy picked up or wrong approvers picked up due to some congif change. now that the config changes are rectified correctly, we need to find a solution to correct the PR's which got affected due this.
    I have to retrigger the release strategy for all the affected PR's.
    The characterstics which we have consider for release strategy is Document Type, Company Code and Price Range.
    Can anyone suggest how can we retrigger the PR in bulk or individual to all the affected PR's, so that it picks up correct release strategy as per new config changes.
    Regards,
    Manjunath K

    Hi,
    Refer the discussion to triggers release again on release code addition/change in release strategy.
    release code is changed on PR release strategy - old PR can´t be approved
    Regards,
    Biju K

  • PR Release with Material Type Characteristics

    Dear Experts,
    Any of you used material type as PR release class craracteristics?
    I have one query regarding this-
    1. My business requires material type wise relesae strategy, means raw material and spares will have separate release strategy
    2. We have included material type in Class cracteristics.
    My query is if user creates a PR with out material code, that PR will not have any material type. But I want this to follow the release strategy. How to achieve this goal?
    Anybody worked with this scenario?
    Full points will be awarded for suitable solutions.
    Regards,
    Santoah

    Hi,
    Instead of material type, you can use material groups for release strategy. Even, if a user creates a requisition without material code, he will still have to enter a material group. This will serve ur purpose.
    However, if there are many material groups and you prefer going with material type, then you will have to enhance the communication structure CEBAN, with Material type field, to be able to create a release characteristic for material type.
    Hope this helps. Reward, if useful.
    regards,
    VS

  • How to create screen sequence and assign to material type

    Hi,
    How to create new screen sequecnce and how to assign it to material type, is there any link of Industry sector with this.
    regards,
      zafar

    how to assign it to material type and also what is use of industry sector
    Industry sector - it simply mean The industry sector groups companies according to activity, for example, plant engineering and construction, mechanical engineering, the chemical industry, and the pharmaceutical industry
    Field references are defined in Customizing for the Material Master in the activity Maintain Field Selection for Data Screens.
    for see field references run tcode OMs9.
    Assign Field references to Material Type by Tcode OmT3E, You can see in OMS2 in General data See Field references and SRef: material type

  • Release strategy for PO and RO

    Hi All
    My release strategy for Purchase order and Release Order is same.My release strategy has material group and PO/RO value as characteristics. What I want is that my releaase strategy for PO should be based on value whereas for RO it should be based on material group. Is this possible since we cannot have different release group for PO and RO.
    Pl suggest how to go about?

    HI Satish,
    In the characteristic value screen we not only can give single values ,but also multiple values
    and also range of values.
    Since the Data type for this Feild is character ,that is the reason it is not taking Ranges
    So the same is not working for PO,I too Checked the same.
    So it is that you have to have material group ,then there is no other go but entering all the values for the same.
    As we cant add a new Release Class also
    Becoz the release class cant be different ,so as the characteristic values would be same.
    if i could find something else will post you soon.
    but as of know we cant do nothing in this case but create all the material group as charecterics values and add to that strategy.
    Thanks
    Anjanna.

  • No release strategy for service PO

    Purchasing document xxxxxxx cannot be released
    Message no. MEPO823
    I created release strategy for service entry sheet through following process.
    1. Created three characterstics(service_val, serv_plant & ZSER_DOC TYPE) and assigned it to class 032 (gave it name service entry sheet) Communication structure CESSR and fields WERKS etc...
    2. Than maintained all the config setting for service entry sheet through External service management..Maintained release groups, release codes, release strategy and r and maintained all the values .
    3.I made a service PO with doc type FO
    Now i dont get a tab of release on the service PO tab and get the above error.
    Just let me know step by step how to config release strategy for service entry sheet.Do we need to maintain all above entries...?
    For PO we have release strategy maintained for all document types and i am able to release the PO.
    Regards,
    Shailendra

    Keep the release strategy at Plant level only....All the purchasing docs will get blocked

Maybe you are looking for