How Configurable Routings get assigned to std. Network / Std. WBS.
We are using config. Routings & in Routing related tables PLKO. I can see std. WBS assignment. In CJ92/ Cn02 I am not able to see routings..... Please tell me how this two objects are get assgined.
My end task is To download the data from one sys & replicate the similar PS template(Std. WBS/ Std. Netwrok ) in other system.
Similar task with with PP Team to replicate the configurable routings from one system to another system. Both of us are not able to find the link between this two. In few of the PP table we can see tthe std. Network/ WBS...
Please explain in detail.
Regards
Nitin
Thanks for reply,
ya it's true... routings are alike activity (PS) / operation (PM/CS) .
Let me explain you my scenario. We are having access to one clients for Se16, we have to copy table for the PS module spedific Master data & put in the prescribed format of client.... The same same task is with PP team.
while doing this activity PP team come up with table PLKO as i mentioned before. Here they are able to see the assignment to std. WBS / std. network for the configurable routings.
while is the CJ93/ CN03 I am not able to see any assignment realted to routhings.
I am not sure regarding it. I have never heard that routings is having linkage/ any sort for intergration with PS sts. network/ std. WBS.
My only question is there any link between routings & PS template ?
If I get some more information will share further...
Regards
Nitin
Similar Messages
-
How do I get or set my network key?
How do I get or set my network key? I secured my wireless network and now I can't connect with my laptop.
ThanksWell, how did you secure it?
You configure the router (for which you find the exact model name and hardware version on the label underneath the router) usually on http://192.168.1.1/ On the Wireless - Wireless Security tab you should be able to see the current wireless security settings including the key. -
a tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore) thanks
Just bridge the TC and plug it by ethernet into the main router.
Bridge in v5 airport utility.
In v6 it is under network.. change it from DHCP and NAT to Off bridge mode.
Turn off the wireless. -
HELP!!! How do I get rid of RIM Network Spam
I get 50 of these a day. I have tried to filter it on my Curve 8330, I blocked sender on my outlook emails and on my comcast webmail I reported as spam and it keeps coming. I recently change me email address and it found me again.
I uninstalled blackberry desktop to see it if this will work
How do I get rid of these?
From: [email protected]
Subject: RIM_bca28a80-e9c0-11d1-87fe-00600811c6a2
This is the body of the message....
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
BEGINETP 116
AR+E+YIAAAAAIBAIMzAyOERBNEMgGXJob25kYWxkYXZpczZAY29tY2FzdC5uZXQAwL9o/1AF
Q01JTUUDQICAgIAyAAAwM0Q5M0RBQUMrRys0ALxi2F/oe0gBZA604J204jwAGYzih0n22Rj1
E6eXY+JwNYc!
ENDETP 2010868856I would still take it to your IT department and discuss the setup with them. They are more aware of their setup than
I would be. You are probably supposed to BES as it is a company phone. I did not think to ask if it was a company phone in my original answer.
Sorry!
Message Edited by Bifocals on 08-18-2008 12:06 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
We use mac mini's in various mobile applications and its impossible to create an adhoc network and have it automatically sign back on with it when we restart or turn the mac mini back on. We use them in airplanes and the unit does not stay powered once the airplne finishes its trip. So we hae to train the pilots to turn it on and setup a new network and its very pesty. Any thoughts on how to fix this. We have already tried to create a new location and mive thr adhoc network to the top of the heirarchy list but it still wont work.
ThanksHmmm - I may be misreading your problem, but try this.
Create the network. When you have the computer connected to the "server" computer, make an alias of the server computer and place it on the desktop. You can try putting the alias into the computer account "log in" items.
Restart. The computer should execute the log in items and join the network if its available. -
How can i get on a 3g network in the United Kingdom on my US bought ipad?
Hello,
I will be travelling to the UK next week and wanted to know what I need to do to connect to a 3g network in the UK on my American ipad2?
Thanks,
JohnTwo options. You could look into an international data roaming plan with AT&T (we are talking about an AT&T iPad2, right?). Or, you can get a pay as you go or prepaid SIM in the UK from some local carrier who offers such a thing for a data plan and use that. Try looking on some of the UK carrier web sites for info about prepaid data - O2, Orange, Vodofone all offer iPad plans in the UK (there are a couple of other carriers too, but I cannot remember them).
-
How do I get my Windows 7 network to see my iPad mini?
Can't get my mini to connect to my network via wifi. Want to stream content from my Win 7 laptop to mini using Plex Media Server.
Thanks for any help anyone can offer.
StanJust to be clear: I can connect to wifi just fine, surf the web, read email. Just can't see other computers on my home network.
Stan -
I need to transition my 1st Generation Apple TV from an older instance of iTunes on my iBook to a new instance of iTunes on my new Mac... How do I get the 5 digit Network code to come back? Is there anyway for 1st Generation Apple TV to be synched to two instances of iTunes or do I have to choose one or the other? I appreciate any advice or suggestions. Thanks!
The 5 digit code is every time different. That does not matter. Just integrate every device into your network.
You can connect many computers to Apple TV but syncronisation works exactly with one computer. That's why I use "streaming". But you can sync one computer, then another, and so on. The content on your Apple TV is the content from your computer that has synced last. But you can not mix it.
The new Apple TV has no syncronisation. Everything is streamed,
Regards,
Torsten,
Germany -
Hi Friends,
How can i get assigned persons.
If i provide superior ( user id OR Name OR personnel number ) i need to get all persons under that superior.
Is there any BAPI or Function module or any standard report.
And let me know the parameters also.
Thanks,
Kumar.Hello,
I was able to get the logic to get the assigned persons using the table HRP1001. The below is the assumed logic (small modifications may be necessary).
First the PERNR of A is to be found out(if only name of userid is available) from the table PA0105. Once the PERNR is available, get the position of A using the following code.
SELECT SINGLE SOBID INTO V_SOBID
FROM HRP1001
WHERE OTYPE EQ 'P'
AND OBJID EQ OBJID
AND PLVAR EQ '01'
AND RSIGN EQ 'B'
AND RELAT EQ '008'
AND BEGDA LE DATUM
AND ENDDA GE DATUM
AND SCLAS EQ 'S'.
Now get the subordinate positions who are one level under him using the below code.
SELECT OBJID INTO TABLE I_OBJID
FROM HRP1001
WHERE OTYPE EQ 'S'
AND PLVAR EQ '01'
AND RSIGN EQ 'A'
AND RELAT EQ '002'
AND BEGDA LE DATUM
AND ENDDA GE DATUM
AND SCLAS EQ 'S'
AND SOBID EQ V_SOBID.
Now get the pernr of the subordinate positions
SELECT SINGLE SOBID INTO SOBID
FROM HRP1001
WHERE OTYPE EQ 'S'
AND OBJID EQ OBJID è from I_OBJID
AND PLVAR EQ '01'
AND RSIGN EQ 'A'
AND RELAT EQ '008'
AND BEGDA LE DATUM
AND ENDDA GE DATUM
AND SCLAS EQ 'P'.
The userid's can be obtained from the table PA0105.
Hope this will help.
Regards,
Sam -
Change Profit Center in FI/CO document for Network or WBs
The client does not want to change the profit center assignment on the network or WBS.
Finance would like the ability to change the profit center when the FI/CO document is created.
When trying a FI or CO substitution , we keep getting an error message stating that the profit center cannot be changed on the object.
The account assignment from the object will overrride any attempt to change the profit center via substitution.
Does anyone know a solution to the problem.
We are investigating adding an enhancement when the error message is called.
Thank you,
JeffreyBut, have you maintained 3KEI settings for derivation. This would give you additional flexibility to define your default account assignments. If still 3KEI is not sufficient, you can try amending the following message KI399 in OBA5. Before, making changes, you should know the implication. My question is what is the business need to change the Profit Center. Why cannot the users enter the correct WBS Element / Order, which contains the correct profit center?
=================================================
Following is the help.
Message no. KI339
Diagnosis
You entered profit center FD999 or transferred it from a previous transaction, such as material receipt from an external order. However, the system derived profit center DUMMY from the account assignments.
System Response
The system automatically determines the profit center from the assigned profitability segment, cost center, order, project, network, sales order, or cost objects. This overrides the profit center you entered manually.
Procedure
To post the data to profit center FD999, assign the profitability segment, cost center or other object to that profit center as well.
If the posting to profit center DUMMY is correct, no further action is necessary.
This message is sent as an error in the standard system. You can make the message a warning or deactivate it entirely in Customizing. Use the Implementation Guide under "Controlling: General" and choose Change message control. Enter area KI and message number 339. -
The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
How do I get Apple to unlock a Verizon unlocked 4s to use domestically on a GSM network?
I have 4 iPhone 4S's in my family. The contract with Verizon ended on December 5, 2013. Early in 2014 I requested from Verizon that all 4 iPhones be unlocked, which was done and confirmed by Verizon. However, subsequently I have learned that the Verizon unlocking only allows use on international GSM networks (which of course shows that the 4S is capable of GSM usage), and I want to be able to use them domestically. Apparently, Apple maintains a kind of Black list to restrict usage of the phone to the original domestic carrier. This is in contradiction to the "Unlocking Consumer Choice and Wireless Competition Act", or S.517/Public Law 113-144, which went into effect August 1, 2014.
When I insert a active AT&T GSM SIM card into the 4S I receive the following notice:
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
How do I get Apple to unlock these phones for domestic GSM use?Rocky Caldwell wrote:
I have 4 iPhone 4S's in my family. The contract with Verizon ended on December 5, 2013. Early in 2014 I requested from Verizon that all 4 iPhones be unlocked, which was done and confirmed by Verizon. However, subsequently I have learned that the Verizon unlocking only allows use on international GSM networks (which of course shows that the 4S is capable of GSM usage), and I want to be able to use them domestically. Apparently, Apple maintains a kind of Black list to restrict usage of the phone to the original domestic carrier. This is in contradiction to the "Unlocking Consumer Choice and Wireless Competition Act", or S.517/Public Law 113-144, which went into effect August 1, 2014.
When I insert a active AT&T GSM SIM card into the 4S I receive the following notice:
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
How do I get Apple to unlock these phones for domestic GSM use?
It's funny that you're totally misreading and understand that law. All it does is make it legal to 'jailbreak' your device. It doesn't force the wireless carrier to allow you to unlock the device under the normal means.
Previously, jailbreaking your device was illegal. Now, it's not. But it doesn't mean that the wireless carrier, or anyone else, has to provide assistance to you.
Show me where in that law that it states that a wireless carrier must assist you. -
I have a current iMac with the latest OS update.
My new smart TV recognizes my network, & asks, “Please enter your WEP keys (10 or 26 hex digits). My Airport Express, an early model, only requires a password of less than 10 characters.
When I open “airport utility,”on my iMac it tells me this version doesn’t support my base station & says go to “Airport Service & Support.” That’s what got me here.
My earlier MacBook runs OS 10.6.8. Its version of Airport Utility works. Its Airport ID has 17 characters, & uses the same password to access the internet, but it also has a “wireless password” of 26 characters, but only shows me the dots. i haven’t the foggiest notion what the characters are, if I put them in there years ago when i did the original configuration, or if they got there otherwise..
I’m afraid of changing those settings for fear that I’l mess up the whole thing.
How can I get my smart TV to connect to my network, ?Please check out the following AirPort User Tip on how to recover AirPort passwords.
-
How do I get my old printer off the network?
Hello
I have a Lexmark Z1480 - if I go onto Bonjour I can see the network webpage my my printer configurations...
I have uninstalled all Lexmark software etc as best I could and that part seems OK...
There is still however the Lexmark network webpage that my wireless printer was using to print wirelessly on my network...
How can I get rid of this webpage - I just want shot of it!!
Many Thanks,
Mr TotsyOk...here goes...
Uninstalled all Lexmark drivers, utilities, software junk from the HD...
Dragged and dropped the ones that didn't go at the 'uninstall' into the Trash...the machine is now completely clear
When I switch the printer on, the wireless WIFI icon on the side of the printer is still glowing 'green'...
It is clearly still connected to my wireless network somehow...
I want to install a new printer onto my network and i'm sure the software that comes with the new printer will allow me to do that no problem...
When I click on the printers network webpage (click on 'show all bookmarks'; select Bonjour; it's listed below the Bonjour intro page) it has all the settings which allow the printer to work correctly on my home network...
Here is the million dollar question...how do I delete that page? It is password protected and no doubt it will be difficult to crack, but wouldn't it be much more secure for me if it wasn't there to be cracked in the first place?
Any help on how to delete the network connection for my printer would be very much appreciated...it is still there after the uninstall process...
Any and all please wade into the debate...the more help the better...I'm a bit of a luddite when it comes to tech stuff like this...
There are plenty of Mac Experts who could give me a hand here !!!!!
Many Thanks,
Mr Totsy -
Hello. First time using this. Still trying to figure out how to post my questions. I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?
If you are using cable and a Nethear router sounds like from the information you provide before your Airport setting are setup improperly. PPoE is not something a cable service would need to work. Fallow the steps I will provide bellow, I will add some screen shots also to assist if necessary.
1 - Open System Preferences from (Menu)
2 - Click "Network"
3 - From the Network window you are going to wanna make sure Location is : Automatic and Show is : Airport
4 - Once the Show: Airport is select you should see a window like this, my window is selected for Ethernet simply because I am no longer running Tiger but the window will look the same.
5 - You will want to click on the PPPoE tab and you should see this
6 - You're gonna wanna make sure " connection using PPPoE " is not select, if it is make sure to uncheck this option
7 - Once this is uncheck make sure to click "Apply Now"
8 - You will want to click back on to the "TCP/IP" tab and make sure IPv4 is set to " Using DHCP "
9 - If the option to " Apply Now" is available again please click this
10 - Once this is done go to your Aiport Menu and see if your network is listed and select your network and eneter the password if necessary.
11 - If after these steps you still have issues I would recommend Power Cylcing your Router and Modem for about 5 minutes
12 - Make sure all lights are off when unplugging the Router and the Modem
13 - Some Modems have backup batterys so you may have to push in a tiny button on the back with a pin
Maybe you are looking for
-
Updated itunes now it doesn't recognize my ipod nano 6
updated itunes now it doesn't recognize my ipod nano 6
-
Writind Data to XML in XML Format
Hi, This is my First post in Sun Forums. I m learning XML writing in Java. I have searched on the Net but unable to find the proper XML writing Method using any API. Please provide code for writing the XML in correct format with useful API.? i m givi
-
In Yosemite: External Hard Drives Won't Spin Down
Since installing Yosemite, my external (and perhaps internal) drives won't spin down in energy saver mode: 'Put hard drives to sleep when possible.' I'm using Seagate Barracuda 2TB internal drives in external Voyager Q drive bays. They seem to be get
-
WAIT statement used, IDOC output time still same
HI All, I have created a Zprog to trigger zIDOCs from R/3 to XI. In my program, multiple idocs of same type are created as the processing is within a loop statement. Due to this fact 5-6 idocs are created within a second and sent out immediately to X
-
Hi, Can anyone help me please. I have a Personal Video Recorder (Humax HDR-1010S), which supports DLNA, connected to my home network via Wi-Fi. I want to play music from iTunes and view photos from iPhoto from my MacBook (which is also connected to