How configure analysis services for remote excel connection
Hi I haved tried connecting me from a Excel client to analysis services server but I have this problema when I use the connection assistant wizzard
appears this error :"Analysis error in line 1, column 9, DTD is denied.
I haved seen this video
https://www.youtube.com/watch?v=tJGGyg1dDHY for configurate the http server.
Thanks!!
Hi Juanweb,
According to your description, you configure HTTP access to Analysis Services on Internet Information Services, and then connect it in Excel using HTTP access with the error "Analysis error in line 1, column 9, DTD is denied."
In Microsoft Excel, we can connect to AS cube directly, why do you use HTTP access to connect it?
Data>select From Other Sources. After that, select the From Analysis Services option.
For the detail information about it, please refer to the link below.
http://www.mssqltips.com/sqlservertip/2828/using-excel-to-interact-with-a-ssas-cube/
Regards,
Charlie Liao
TechNet Community Support
Similar Messages
-
I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
NarminI am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications. -
How to set password for Local are connection?
How to set password for Local are connection?
do you mean the 802.1x authentication?
check out links below:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
http://technet.microsoft.com/en-us/network/bb545365.aspx
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes -
Failed to Configured Domain Services for Windows
Hi!
I am installing OES 2 SP3 with DSfW Pattern as a "New Domain Controller in an Existing Domain Services for Windows Domain" with Replication Configuration and Schema Partition.
During the "Perform eDirectory Configuration" at last task "Configure Domain Services for Windows " at 93% we encountered an error: "Failed to configure Domain Services for Windows".
Here's details of error ;
command : perl /opt/novell/xad/sbin/ndsdcinit.pl retry full-replica -d 'vec.apd.com.ph' -l 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'
-g 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph' -f 'apd.com.ph' -p 'apd.com.ph' -o 192.168.81.92 -t
Could not create gss directory /etc/opt/novell/xad/gss at /opt/novell/xad/sbin/ndsdcinit.pl line 463, line 652
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
SASL/GSS-SPNEGO authentication started
SASL SSF: 56
SASL installing layers
Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 503
at /opt/novell/xad/lib64/perl/Logger.pm line 119
Logger::_err('Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') called at /opt/novell/xad/lib64/perl/Logger.pm line 202
Logger::Log(0, 'Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 532
adc_install::decide_domain_zones() called at /opt/novell/xad/lib64/perl/install/adc_install.pm line 150
adc_install::stage_domain('adc_install=HASH (0X8b9370)') called at /opt/novell/xad/sbin/ndsdcinit.pl line 1383
main::main(62, 'apd.com.ph', 'vvec.apd.com.ph', 'TRUE','ou=OESSystemObjects,dc=vec,dc=apd,dc=com,d c=ph','ADM_PASSWD_DOMAIN','ou=OESSystemObjects,dc= vec,dc=apd,dc=com,dc=ph','replops::DESTROY',
'APD.COM.PH',...) called at /opt/novell/xad/sbin/ndsdcinit.pl line 1301
main::main() called at /opt/novell/xad/sbin/ndsdcinit.pl line 1425
ENV PATH = /opt/novell/xad/sbin:/opt/novell/xad/bin:/opt/novell/xad/share/dcinit:/opt/novell/eDirectory/bin:
LIB=lib64
LD LIBRARY PATH =
/opt/novell/xad/lib64:/opt/novell/xad/lib64/nds-
modules:/opt/novell/eDirectory/lib64:/opt/novell/eDirectory/lib64/nds-modules
SASL PATH = /opt/novell/xad/lib64/sasl2
DCINIT CONFIG: /etc/opt/novell/xad/xad.ini
DOMAIN NAME: vec.apd.com.ph
PARENT NAME: apd.com.ph
FOREST NAME: apd.com.ph
NETBIOS NAME: VEC
Any ideas on this error ?
Regards. Thanks.
denzmoThanks for the reply.
I have some followup questions
2. Can you explain the DNS setting in your setup ?
Tree ---> Power--> apd.com.ph -- dlpc.apd.com.ph
-- vec.apd.com.ph -- Andromeda.vec.apd.com.ph (DNS)
-- Pictor.vec.apd.com.ph ( additional domain server ) -> "Failed to configure in DSFW"
1. apd.com.ph, dlpc.apd.com.ph, vec.apd.com.ph are DSfW domains or just DNS domains ?
2. Andromeda.vec.apd.com.ph (DNS) - is this the DC of a DSfW domain ?
3. You are adding the Additional domain controller to the vec.apd.com.ph domain right ?
The
# LDAPCONF=/etc/opt/novell/xad/openldap/ldap.conf /usr/bin/ldapsearch -Y EXTERNAL -s sub -b dc=ph "(objectclass=dniplocator)" dn
Heres the result ;
a.) running the command in the DNS server (child domain) ANDROMEDA;
SASL /EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0, cn=peercred,cn=external,cn=auth
SASL SSF: 0
# extended LDIF
# LDAPv3
# base <dc=ph(objectclass=dniplocator) [email protected]> with scope subtree
# filter: (objectclass=*)
# requesting:ALL
# search result
search : 2
result : 32 No such object
text : NDS error : no such entry (-601)
# numResponses :1
This is strange. This ldapsearch is failing to find the locator object in the tree under dc=ph.
- Can you try this same command from your FRD DC too and find the result ?
- Is your server non-name mapped or your adding a DSfW server into an existing eDirectory tree (name mapped) ?
- If it is later can you try the same search with '-b' parameter replaced with container to which FRD is mapped to into the eDirectory Tree.
- Can you tell in your setup where are the locator object present for your first DSfW server which is acting as DNS server ?
- While installing this ADC server, you have given the remote dns server as 192.168.81.92. In the YaST DNS screen did you do retrieve (by clicking 'retrieve' button on the screen ) or you entered those inputs manually ?
- Another follow up question. The locator context provided to the ndsdcinit command in your first post, is 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'. Can you confirm your locator
context is correct ?
[/QUOTE]
b.) running the command in the ADC PICTOR;
SASL /EXTERNAL authentication started
ldap_sasl_interactive_bind_s: invalid credentials (49)
[/QUOTE]
This is expected as the server is not completely configured.
Please get it touch with our NTS for passing on more information about this setup. -
Configuring Web Services for Oracle XML DB
Hi all...
I think I need some help one this subject....
We have a 10G Release 2 Oracle single instance ( not RAC) install on a Linux Redhat v5.3 64 bit server. Are developers are user Visual Studio .Net and wnat to send xml files to a web service so that the xml file (containing data) can call a PL/SQL package (to be written) which will take the data out of the xml input file and insert rows into a prefined table within the instance. Now they have browsed the web and have come upon the following links...
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb_web_services.htm
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb22pro.htm#i1026724
Currently, within the database I looked at the schema XDB and have unlocked the account and connected as the user XDB. There are some 680 objects in the following groups...
SQL> select object_type, count(*) from dba_objects where owner='XDB' group by object_type;
OBJECT_TYPE COUNT(*)
SEQUENCE 2
PROCEDURE 5
OPERATOR 8
LOB 334
LIBRARY 12
PACKAGE 20
PACKAGE BODY 17
XML SCHEMA 25
TYPE BODY 5
TRIGGER 12
TABLE 36
INDEX 51
FUNCTION 5
INDEXTYPE 2
VIEW 2
TYPE 144
16 rows selected.
Now in the links above it mentions that the xdbconfig.xml needs to be altered etc. However, I have searched the entire $ORACLE_HOME and there is no file definition of that description.
From a DBA prospective...what do I have to install on the Linux server? I assume from the Oracle Database 10g Companion Products I need to lay down Oracle HTTP Server in a new Oracle home as the first step...or not? Does the HTML DB need to be installed as well?
And for Configuring Web Services for Oracle XML DB...what else has to be installed? And from what product line?
Thanks in Advance....
Cheers
RoegrHi Marco...
First of all ...thanks for the reply.
I followed the link and the infor in that web page. However, there were a few things that did not work....
1. The http://localhost:8080/ as is brought up a web page withe the heading as
==========
ORACLE DATABASE 10g EXPRESS EDITION LICENSE AGREEMENT..
==========
The other browser test ftp://localhost:2100/
did not find any page?
2. Then I went onto running (as the sysdba) the pl/sql to enable the ORAWSV Entry Service
however it error out. So I did a describe on DBMS_XDB and the function deleteServlet does not appear
then I had a look and this link to > http://www.liberidu.com/blog/?p=471
was for 11G and the other link > http://docs.oracle.com/cd/B28359_01/appdev.111/b28369.pdf
was for 11G.
However, we are on 10G
=================
SQL> select * from V$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
==================
So is there must be other sql for 10G?
Cheers
Rog -
How to Network Interface for Remote Debugging in Adobe Flash Professional CS6?
How to Network Interface for Remote Debugging in Adobe Flash Professional CS6?
Check out : http://helpx.adobe.com/flash/using/whats-new-cs6.html
In that click on "Choose network interface for remote debugging for AIR" section.
Hope it helps. -
How to add services for object in ECC6.0
Hi everybody,
Can anybody tell me how to add "Services for Object" icon in ECC 6.0 because this icon is there in 4.6C but not coming in ECC 6.0.
Thanks in AdvanceHi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent. -
When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: <Button SCI>. Also "Waiting for remote debugger connection." What is my next step?
Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
And sorry to report that OSX is more Widows like than ever, but….
If that doesn't help Reinstall the OS. -
How to configure 2 PS3 for NAT 2 connected to WRT350N
Okay so 1 of the PS3 is wireless and another is wired and both are connected to my WRT350N. Is there anyway to configure WRT350N so that the 2 PS3 that I have will have NAT 2? Right now 1 of them is NAT2 and the other is NAT3. I tried to configure them both for NAT2 but it just doesn't work. Am I missing something? PLease help!
NAT 3 = Restricted voice communication and other features
NAT 2 = Correct ports fowarded for your PS3 or it's DMZ'd
NAT 1 = No router, it goes straight through the modem (normally)
So like I was saying, I want the 2 PS3 that I have to be on NAT 2 and with the WRT350N, I can't seem to configure them to NAT 2 at the same time. -
How to: Setup AAE for Remote Disk Access & Serve PS3
Hi there,
I've read so many tutorials, and tried so many combinations, but haven't found anything for my specific purpose.
I was wondering if someone might have the insight to do a quick run-through (including specific settings) on how I would setup my Airport Extreme for the following scenario/purpose.
Setup:
1. Netgear DGN2000 ADSL Modem + Router in one
2. Airport Extreme = Model #A1354
3. Western Digital Studio 1TB (mac os extended journaled formatting - not used as time machine)
4. PS3 80gb
*To accomplish:*
1. Access the Western Digital HDD remotely. So I can access my files from work.
2. Use the Western Digital HDD to serve media to the PS3 when I'm at home, so I can watch movies without having my computer turned on.
Caveat:
1. I don't want to use/pay for MobileMe.
Many thanks,
GlenHello nelga. Welcome to the Apple Discussions!
Since most of your questions are not really AirPort networking related, I will do the best I can to provide assistance.
1. Access the Western Digital HDD remotely. So I can access my files from work.
I know you don't want to use BTMM, but to best understand the hurdles you will be up against, it might be worth taking a quick look at how BTMM works "behind the scenes" to allow you to access a HDD remotely.
BTMM - Basic Communication Flow
o For a computer connected to the Internet via a router, BTMM "asks" the router for its configuration information. For a router, like your AEBSn, that uses NAT-PMP, BTMM will ask the router to assign arbitrary public ports. In turn, the router will provide these port assignments (& the router's Public IP address) back to BTMM.
o BTMM then sends this information to the MobileMe account. In background MobileMe updates a special set of DNS entries to be used by BTMM. These entries are then made available to all BTMM clients using your MobileMe account. When a computer, with BTMM enabled, uses your MobileMe credentials, it automatically retrieves a list of all other computers/routers that are registered with the same account. All these devices should then appear under the SHARED section of the Finder.
o When attempting to connect to a remote computer (or router), BTMM creates a secure connection to that remote device using the information from the MobleMe account.
o Once the connection is established, the devices can then communicate with each other.
The key to all this is that you will need the following in order to be able to remotely access the HDD:
1) Your ISP must provide you with a publicly reachable IP address.
2) If your ISP provides you with a Dynamic (vs. a Static Pubic IP address), you will need to keep track of that IP address in order to consistently have access to the HDD. Without knowing this address, when your ISP changes it periodically, you will have to manually "retrieve" it to connect again. You can get around this by using a service, like DynDNS.
3) You will have to configure your NAT router for port forwarding/mapping to allow the necessary file sharing communication to pass through the router to the AEBSn with the shared HDD. Specifically you want to open the appropriate ports for both the AFP (TCP: 548) & SMB (TCP: 445) file sharing protocols.
4) Similarly you want the AEBSn to be enable for file sharing.
2. Use the Western Digital HDD to serve media to the PS3 when I'm at home, so I can watch movies without having my computer turned on.
In order to stream video from your WD HDD, you will need a DLNA-compliant Media Server to stream that data to the PS3, which is a DLNA client. With that said, you will need at least one computer (Mac, PC, or Linux-based device) running in order to run this server. The WD HDD has no means to run this server as it has no operating system. -
How configure reporting services configuration with sql server business development studio
I have installed sql server 2008 r2 mixed mode(sql server authentication) with native mode
I want to run report using reporting services config manager.
I made report in ssrs and I have configured reporting services configuration and web url from RSCM( reporting services config manager), i put on ssrs report.
report is build and deployed but when i take deployed url on Internet explorer, it shows the window below:
when I put the password nothing happened . if I put url in google chrome then it shows authentication required window like the same in IE
if I passed username=(levent/sa) and password then goes on window but does not see on page, if I passed only administrator name (levent) not passed sql server login name (sa) then does not close 'Authentication window'
'Computer connect net with modem'
before i tried on earlier PC, it worked fine.
setting is below link like this.
only set service Account is Use_built=NetworkSrvice
link
http://www.azurecurve.co.uk/2012/02/how-to-configure-sql-server-reporting-services-in-order-to-deploy-reporting-services-reports-in-gp/
what is the problem
Plz give suggestion quicklyHi tusharshinde,
Per my understanding that when you log in the report Manager you got the pop-up window ask for credential, you try to enter the SA account and the window account as the username and password but both not work, right?
Your issue related to the authentication. As you mentioned you have choose the ”Network Service” as the Service account, generally using this account in RSCM and RSWindowsNegotiate is added to the RSReportServer.config file as the default setting. With this
setting, the report server can accept requests from client applications requesting Kerberos or NTLM authentication. If Kerberos is requested and the authentication fails, the report server switches to NTLM authentication and prompts the user for credentials
unless the network is configured to manage authentication transparently.
The issue can be caused by many factors and please check one by one.
Did you enter the username and password for three times and got blank page or got some error? If you got some error, please provide the error information.
you can delete the specific Authorization Types inside rsreportserver.config file, open path:” \Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config”.
Search the file for the “AuthenticationTypes” section. Remove RSWindowsNegotiate and RSWindoeBasic to ensure only “RSWindowsNTLM” is specified in the file rsreportserver.config file.
Before do any modification, back up the files and remember to restart the ReportServer instance in the RSCM after the modification.
If step1 doesn’t work ,please also do the trusted Site Setting in the Browser, article with details steps for your reference:
http://technet.microsoft.com/en-us/library/bb630430.aspx
Please check the Report Manager's authentication mode.Have a look in the Report Manager's web.config file to check if you can find below information under the <system.web> (Path is “C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\ReportManager\Web.config ” ).
authentication mode="Windows"
identity impersonate="True"
Similar threads for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/23c5daa0-3232-4e8c-89c9-4526960c9d14/ssrs-2008-credentials-login-prompt?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0778e2ca-0fb1-4b5c-996c-6e327b5e1473/user-logon-credentials-for-ssrs-web-server-setup?forum=sqlreportingservices
Please tried to provide us more details information, if the problem still exists:
Did you login in the report manager locally or remotely via Browser and which URL you are using to login the Report manager?
Did you modified some configuration file before and what did you modified?
Did your windows account have the right permission to access the report manager?
Any problem, please feel free to ask.
Regards
Vicky Liu -
Configuring Reporting services for SCCM 2012
Hi,
I just finish create SQL reporting services ( configure Database, report manager URL) in SQL 2008 R2 for SCCM 2012. When I open the Report option in SCCM console (Monitoring --> Report), no report listed there and then I try to add in Reporting service
point for it, but get an error message
"There is a problem connecting to the specific reporting server. Please check the connection and make sure SQL reporting service is running on the specified server"
I manually browse to http://sqlserver/reportserver or
http://sqlserver/reports , that is no any folder exist there (I assume when I configure reporting service it will automatic create a folder for it with all report inside?). Anyone can guide me on how to solve this issue?
Regards,Hi,
hi ,
I am new to SCCM 2012 group and i have knowledge on sccm2007. i want to discuss some issue what i have with SCCM2012 installtion. The issue is my machine got rebooted while installing sccm 2012 SP1.i have already installed all the prerequisites for SCCM2012.i
am installing sccm2012 on Hyper-V machine.
Please see my system configuration below:
DomainController(2008R2 server) : 512MB RAM, AD things and DNS ,DHCP has installed on it.
System center server(2008R2) : 1028MB RAM , Sql 2008 server installed on it.
i tried to install it many times but still i got the same issue.
Could anybody please help me with this ?
This is a new question. So please ask this question on a new thread in this forum.
Thank you.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Configure Time Capsule for remote access
I have a second generation 2TB Time Capsule, operating on Bridge Mode, connected to an Arris Touchstone Telephony Gateway TG862. I want to configure Back to My Mac to be able to access the Time Capsule remotely.
I've followed the basic steps and get this message from the settings in the iCloud Pane in System Preferences: Setup router for better performance. And this details: Contact your ISP for a different server address.
I've tried Google and OpenDNS, and also disabling the Firewall in the Arris router, and still can't access the Time Capsule remotely.
I also tried disabling NAT and seeing it up as Bridged in the router, and disabling Wireless as well, trying to configure the Time Capsule to serve NAT and DHCP to no avail.
Any steps I'm missing or a whole different approach I should take to be able to access my Time Capsule remotely?
Thank you in advance for any help.You will have to learn how to port forward in your Arris Gateway..
Arris Touchstone Telephony Gateway TG862
The easiest way is to simply google it.
http://forums.comcast.com/t5/Home-Networking-Router-WiFi/Port-forwarding-in-Arri s-TG852G-CT/td-p/954929
It certainly appears to be problematic.. which is not surprising... If you really need remote access I would request a pure modem from your ISP (Comcast??) or simply replace it with one in the list. You will need to turn off any inbuilt firewall in the router and use DMZ perhaps to the TC.
There is a few posts on youtube which also might help you. eg
https://www.youtube.com/watch?v=_8tKBHvCz_0
But I am on ADSL so my setup is too unlike yours to really tell you much.
If you want to test something.. let me recommend you load Teamviewer onto a computer in your LAN.. set the computer up to never sleep and then try and reach it using Teamviewer from WAN connection.. if that works.. let me recommend you stick to something of this type. Unless you are prepared to change modems with your ISP I doubt you will solve it.
If teamviewer fails nothing is going to work.. you need to at least turn off the firewalls in both the computer and the router..
If you don't want to leave a computer running 24/7 to accept incoming requests.. then use WD MyCloud or similar type NAS.. which are far better designed for remote access than Apple routers.. or use a cloud storage and keep files you might want there. -
How to display service for object (attachment content ) in script
hi all
In me23n we find services for object like attachment, private note, workflow etc...
i need to display the attachment content in script ..
how could i do this ?
any body give your valuable inputs to bring solution.
Regards
deepikaHi,
Configure it for document type SDIORDER.
sirish -
Hi Experts ,
Need help with the respect to understand the best practice to place/create the DHCP scope for remote site Guest SSID which will be connected to HQ Foeign-Anchor controller set-up.
how about internet traffic for Guest SSID , which one will be recommanded :
1) Guest SSID gets authenticated from HQ ISE and exposed to the local internet
2) Guest SSID gets authenticated from HQ ISE and exposed to the HQ internet
ThanksHi George ,
Thanks for your reply ...So you mean, best design would be to create the DHCP scope into DMZ for guest and let it get exposed to HQ internet ...
how about if I have another anchor controller in lets say in other office and I need to anchor the traffic or load balance from HQ foreign controller , in that case if I create DHCP scope into HQ anchor controller and if its down , I will loose the connectivity , how do I achieve fail-over to another anchor ?
Do I need to create secondary scope into another anchor controller and let the client get reauthenticated from other location ISE and get ip address as well from another anchor controller . Is it what you are proposing ?
Maybe you are looking for
-
How to write if statement for knowing that user is executing in background.
Hai Experts. I am having a report , in that i want two types of output say when i execute in foreground it should say " Hello it is foreground". when i execute it in background as a job it should display " Hello it is back ground". please tell me how
-
Adding new field to Customer master sales data area sales tab
Hello everyone, I am new to module pool so seeking some help from experts here. I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab. I found that there is no screen exit.Is there any other wa
-
REG: File content conversion in Receiver file adapter
HI Gurus, I have the scenario like proxy to file with content conversion my message type for the source like this MT_SOURCE -----|| |---ROW ------------|| |---LINE target strucuture also same MT_TARGET -----|| |---ROW --
-
Bridge CS3 not writing metadata to JPEG files
For the last couple of months (without my noticing until a couple days ago) all JPEG files that I have edited using Bridge CS3 (on Windows XP) do not have the metadata built into the file. Here are the symptoms: use "File Info" to edit the metadata f
-
17" Powerbook Mac OS X (10.4.10) dial up service
I have "dial-up" service & would like to connect wirelessly using my Airport Base Station. Presently I am hard-wired to my computer from the phone jack. My computer does see the Airport base station(I see the signal strength indicator. I cannot conne