How connect to airport from windows partition on mbp?

I have recently added Windows 7 to my MBP. The MBP is connected to my home network via Airport Extreme. When I'm in Windows, there is no connection to a network. Anything I do there involving setting up a network connection, a screen shows "no connection." Stops me cold. I do get a screen that asks several tech questions, such as ISP addr., password, etc.
I did find my "IP" addr. in Airport Utility, but I don't know if that's same as "ISP." If anyone has successfully installed Windows 7 on their MAC & established a connection w/ Airport Extreme, I'd like to know how they did it. If you need more info, let me know.

Hi,
To connect to the virtual network with a point-to-site VPN, you’ll need to install a VPN package on the VPN client computer. Since Windows 10 and MAC OS are not supported, the related VPN packages are unavailable.
In addition, if you have a on-premise VPN device, you can create a site-to-site VPN instead.Or you can use ExpressRoute to create private connections between Azure datacenters and infrastructure that’s on your premises.
For more detailed information, please refer to the links below:
Configure a Point-to-Site VPN in the Management Portal
ExpressRoute or Virtual Network VPN – What’s right for me?
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Newbie : Trouble connecting to Airport from Win 8.1 on Macbook Pro

I recently bought a Macbook Pro 2013 and an Airport time capsule 2TB . I have win 8.1 installed via boot camp but am unable to connect to airport from windows as I get a "The capability of your network adapter does not match the requirements of this network". No problem connecting to the airport from the OSX partition. Also no problem connecting to a different wireless "N" network. I did install the windows drivers from Apple. The network is seen from windows byt has an x marked against it with the above message. Can some one help?
Arun.

Hmm... No answers yet I am still having this problem. I can't be the only one using Windows 8.1 on a 2013 Macbook Pro trying to connect to an 2013 Airport Time Capsule. Am I? Maybe I should play the lottery ;-). Any way if there is any one else successful in the above mentioned set up. I'd like to see if I can mimick their set up. Can some one verify if I am using the right driver to begin with? I have version 6.30.223.170 from broadcom corporation. If that is not the version to use, can some one please let me know which one to use. I can also let you know my settings if that does not work. I can do that by private email and post a consolidated reply if I am able to solve the problem. Thanks in advance and Happy New Year to all.

Connect to Mac from Windows

I have three Windows systems and one Mac.
Currently, to connect to my Mac (OSX Tiger) from Windows I have to be logged into the Mac as that user on the Windows machine.
I have three users that access the Mac. All are setup on the Mac as users. All are setup on the Windows systems as users.
But if John logs into the Mac and Betty tries to access the Mac from her computer she cannot. If John tries to access the Mac from his Windows system he can.
Does anyone know how to setup the Mac so that any of the three users can connect to it from Windows regardless of who is logged in?
I tried to set the group to staff for all the users public folders but that did not help.

The user names and passwords are the same on both systems. That is not the issue.
The issue is that each user can only connect to the mac from their windows system when they physically log on as user at the mac.
Otherwise it will not even show up in their network neighborhood.
If I boot up the mac and log in as the user, I can connect to the mac from my windows system but the other two users can't.
Likewise if one of them logs in as the user on the mac, I cannot connect to it from my windows system.

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Is Apple compatible with Microsoft Office?
Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
How can I transport from Windows to Mac?
You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

HT1296 How to transfer photos from windows XP to IPad2

Want to know how to transfer photos from windows xp to IPad2

Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

How connect to internet from domain created in Hyper-V

How connect to internet from domain created in Hyper-V
Host = Win8 Pro
Connection to internet done using WI-FI
Internet seeting
Home router with secury connection -> cable internet
Network name set on router = "Mtl2014"
Host setting
TCP/IPv4 Seeting for WI-FI ,connected to "Mtl2014"
Obtain address automaticly
Obtain DNS server address automaticly
I can connect and browse internet from host
In Hyper-V
1.created 2 private virtual switches SW1 and SW2
2.installed 2 VM HA1 and DC with Win2012 server eval edition
3.assigned stations HA1 and DC to virtual switch SW1
on Host
WI-FI network connection
Sharing->Allow other network to connect.. ->Home network connection vEnthernet (SW1)
in Hyper-V
choose Activate windows on HA1 and DC
open browser on HA1 and DC ,
At this point I am able to see and browse and search in google from HA1 and DC
In Hyper-V
assined virtual switch SW2 to DC and HA1
created Domain controler on DC and domain Alex1.com
TCP/IPv4 Seeting on DC
IP = 192.165.1.8
subnet = 255.255.255.0
default getaway = empty
Prefered DNS server = 192.165.1.8
TCP/IPv4 Seeting on HA1
IP = 192.165.1.11
subnet = 255.255.255.0
default getaway = 192.165.1.8
Prefered DNS server = 192.165.1.8
added HA1 to domain Alex1.com
Question
What seeting on SW2, DC, HA1 and Wi-FI should I change in order to have access to internet from Alex1\DC and Alex1\HA1?
I was planning to use internet to download/install pacthes/updates for windows and sql servers located on Alex1\
I plan to build 6 more Win 2012 server eval and join then to Alex1\
Thank you
Alex

I see.
1. 192.168.0.0 addresses are not routable across the public Internet. Even if the whole world knows you're using that space, the information is useless. But if you feel better hiding it, OK.
2. Internal doesn't allow communications with a physical network either. Only the external type does.
3/4. Your problem is not really with Hyper-V. It's with IP.
Your machines are all able to communicate with each other because they're on the same switch and the same subnet. No gateway is required. If you have a computer with an IP of 192.168.1.8 and its subnet mask is 255.255.255.0, then it will be able to communicate
with any computer on the same switch with an IP of 192.168.1.anything. It's when they need to talk to computers off of that subnet (anything that doesn't fit the 255.255.255 mask) that they have a problem. For that, you need a gateway somewhere. You can't
use "DC" for the gateway because it's not performing routing services.
You have two choices.
One is to use an external switch so that your guests are directly connected into your physical network. That will take over your WiFi adapter, so you'll probably want to set the share option so your Win8.1 box continues to function. Then just use a common
IP subnet with everything else on your home network.
The second is to set up a software router. If you are using an internal virtual switch, then this has to be in the Win8 environment. I might be mistaken, but I think that
Internet Connection Sharing would even work for this. If you are using an internal virtual switch, then your Win8 system should see two (or more) adapters. One of them is the physical adapter (we'll call it wNetAdapter) and one would be the virtual adapter
(we'll call it vNetAdapter) it uses on the virtual switch. Once you set up ICS, you would have all of your VMs use the IP address that you assigned to vNetAdapter as their gateway.
Eric Siron Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
"Every relationship you have is in worse shape than you think."

How can i transfer from windows to mac with my catalogue ?

hello, how is the best way to transfer my catalogue from windows (8.1) to mac (yosemite) ?
thx for your help.
best regards from germany
oliver

Is Apple compatible with Microsoft Office?
Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
How can I transport from Windows to Mac?
You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

CONNECT UNIX MACHINE FROM WINDOWS USING C#

Hi all i have a requirement to connect unix machine from windows using c# code . I have the IP Address of the unix machine and the path too.I have to make a FTP using the c# code from unix to windows and vice versa . Can anybody help me out on this . It
would be great if have a solution for this .

Hi
Balamurali_Mohan,
Please refer to the similar thread
How to connect to unix server using c#
The marked answer said: Use a SSH (secure shell) client wrapper for .NET to connect to the remote UNIX machine and execute commands to run your script.
Have a look at:
http://www.codeproject.com/KB/IP/sharpssh.aspx
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to transfer files from windows 7 to macbook pro

how to transfer files from windows 7 pc to my new macbookpro

You can use your external hard drive that is used to backup your important data to transfer the data from your PC to your Mac.
If your Windows 7 PC is a laptop and you live near an Apple store, make an appointment at the Genius bar where they will help you transfer the data you want transferred from your PC to your MBP.

HT202879 I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Office for Mac, http://www.microsoft.com/mac/products, can open/edit/create Office documents.If your external drive is formatted NTFS then you can copy the Office documents to your computer and work on them. You won't be able to save the files back to your NTFS formatted drive. But you will be able to save the documents to your internal drive. You can move all the external files to your internal drive then format the external drive for Apple. Then you can copy the files back to your external drive for ongoing use.

How do I switch from Windows to mac?

How do I switch from Windows to mac on a macmini?

Hi,
I assume you are talking about a BootCamp Windows, right ?
If so, usually you hold down the Alt/Option-key at startup of your Mac to get the Boot Selection screen.
There you can choose which Operating System to boot into.
Once in OSX you might wanna go to System Preferences - Startup Volume and set your OSX to be the default.
Regards
Stefan

How To Migrate Databases From Windows 2003 32 bit to windows 2003 64 bit?

Hi,
How To Migrate Databases From Windows 2003 32 bit to windows 2003 64 bit?
Db Version: 10.2.0.2
Thanks,
Yusuf

Also see MOS Doc 403522.1 (How to Migrate Oracle 10.2 32bit to 10.2 64bit on Microsoft Windows)
HTH
Srini

How to import favorites from Windows

How to import favorites from Windows Internet Explorer 9 to MAC?

Here are some links you should bookmark and begin using, they're specifically for MS Windows switchers. Your answer for that question and I'm sure many more will be inside.
Mac 101
Switch 101
Find Out How Video tutorials
List of Useful URLs for switchers

How to uninstall portal from windows machine?

Hi gurus,
Can u guid me how to uninstall portal from windows machine.
Also please tell me the installation document procedure or document.
Regards,
Shivraj Chalke

Hi!
This depends on your EP release.
For Basis release 6.40 (EP6) there should be an UNINSTSAP.EXE somewhere in your SAP-Filesystem which you need to run. Take care with the options you have, you might delete even the OS-Users (even on the domain) if you just click away without reading.
For Basis release 7.00 (EP7) you call sapinst and select 'uninstall' under 'Additional Software Lifecycle tasks'. This will guide you through the process of uninstallation.
If these operations fail you can manually clean the system by removing the files and cleaning the registry. This is only a sort of last resort though.
Regards,
Jörg

How to download music from windows media center on home computer to i pod touch

how to download music from windows media center on home computer to i pod touch

You don't.
you have to put the music in itunes and sync it from there.

How connect to airport from windows partition on mbp?

Similar Messages

Maybe you are looking for