How connect to wi fi?

How do I connect an ipad mini to wifi network?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

How connect a 27 cinema display to HP Pavilion with VGA video output

how connect a 27 cinema display to HP Pavilion with VGA video output

If it is a thunderbolt version of the apple 27" display, you don't. The TB displays can only work with a TB source.
I also think you are out of luck with the mini-displayport versions of the apple 27" as well. This would imply converting an analog VGA output to a digital input of the 27". I suspect that there is not enough data supplied by VGA for that to work and I do not believe any adapters exist for this.

How connect iPhone to TV (Philips) via USB?

How connect iPhone to TV (Philips) via USB, because TV does't recognize iPhone.

http://support.apple.com/kb/ht4108
http://support.apple.com/kb/HT1454

How connect External monitor to iMac?

How connect External monitor to iMac?

How to do that depends on the iMac variant you have. iMacs have been in continuous production since 1998 in four broad families that are not 100 percent alike in behavior.
Please look at the iMac images and descriptions in the links on this site:
http://www.everymac.com/systems/apple/imac/index-imac.html
and tell us what variant you believe you have.
iMacs from the first through third-generations (G3, G4, and G5 processors) that support an external monitor were not set up to do anything other than "mirroring"--you see on the external exactly what is on the built-in display.
Your description sounds like you have a newer iMac than this forum covers because, starting with the Intel iMacs in 2006, external monitors were allowed to do both mirroring and "extended desktop." The latter is what I believe you are seeing.
Try this first: press the F7 key. On many Macs capable fo using external monitors, this was a shortcut to toggle between mirrored and extended display. If your keyboard has an "fn" modifier key, you may need to press that to get the F7 key to work.
If you have an intel-powered iMac I can ask the Hosts to move you to that forum, which is much more active than this one which is for pre-2006 iMacs.

How connecting my iPad to sharp printer MX 2700 N ?

How connecting my iPad to sharp printer MX 2700 N ? With an appli apple ?
Thanck a lot.
ZINO44

Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix/setup:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can anybody tell me how connect by level works

Hi ,
Can anybody tell me how connect by level works
select level
from dual
connect by level <= 10 ;

Yes, fully agreed, but still:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:40476301944675#51121960168460
That might be an old example, but dual's behaviour changes often whenever a new database version gets shipped, like FAST DUALwas 'invented' for Optimizer since 10G.
Oh well, I know you know all that ;)
though of course any one row table could be usedTrue and interesting, but would you dare to replace all references to dual on a production system to another one row table?
Theoretically you're right, but imo (and others) Oracle keeps on doing stuff for dual 'under the hood'.
It is a totally different 'table'.
That's my point to OP.
Maybe I was and am only nitpicking, I now realize, so I'll go get me some coffee ;)

How connect to a Braven 650 SPEAKER when only link is to a 650 headset appears

How connect a Braven 650 SPEAKER when only link is to a 650 HEADSET?

Have you tried discoverable? Or try using the headset? If all else fails refer to the owners manual:) I would also try calling the manufacturers support, as sometimes these manuals are translated from Chinese, and much can be lost in translation. The site offered little in the way of info. Good luck, just tried to help. All the best

How connect to SAP?

Hi, i want do an application, but i don´t know how connect to sap... In webdynpro i create a new model, and call the BAPIs... i want do the same in MI, can i?
Thanks,

Hi Victor,
Refer this link, wil be useful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0baafd6-52fa-2910-c6a8-fbb9399cb4ab
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2af96497-0901-0010-8f9e-d5779d281e1a
http://help.sap.com/saphelp_nw04/helpdata/en/1c/8c1b40fcdd8f5ce10000000a155106/frameset.htm
Regards,
Shemim

How connect to internet from domain created in Hyper-V

How connect to internet from domain created in Hyper-V
Host = Win8 Pro
Connection to internet done using WI-FI
Internet seeting
Home router with secury connection -> cable internet
Network name set on router = "Mtl2014"
Host setting
TCP/IPv4 Seeting for WI-FI ,connected to "Mtl2014"
Obtain address automaticly
Obtain DNS server address automaticly
I can connect and browse internet from host
In Hyper-V
1.created 2 private virtual switches SW1 and SW2
2.installed 2 VM HA1 and DC with Win2012 server eval edition
3.assigned stations HA1 and DC to virtual switch SW1
on Host
WI-FI network connection
Sharing->Allow other network to connect.. ->Home network connection vEnthernet (SW1)
in Hyper-V
choose Activate windows on HA1 and DC
open browser on HA1 and DC ,
At this point I am able to see and browse and search in google from HA1 and DC
In Hyper-V
assined virtual switch SW2 to DC and HA1
created Domain controler on DC and domain Alex1.com
TCP/IPv4 Seeting on DC
IP = 192.165.1.8
subnet = 255.255.255.0
default getaway = empty
Prefered DNS server = 192.165.1.8
TCP/IPv4 Seeting on HA1
IP = 192.165.1.11
subnet = 255.255.255.0
default getaway = 192.165.1.8
Prefered DNS server = 192.165.1.8
added HA1 to domain Alex1.com
Question
What seeting on SW2, DC, HA1 and Wi-FI should I change in order to have access to internet from Alex1\DC and Alex1\HA1?
I was planning to use internet to download/install pacthes/updates for windows and sql servers located on Alex1\
I plan to build 6 more Win 2012 server eval and join then to Alex1\
Thank you
Alex

I see.
1. 192.168.0.0 addresses are not routable across the public Internet. Even if the whole world knows you're using that space, the information is useless. But if you feel better hiding it, OK.
2. Internal doesn't allow communications with a physical network either. Only the external type does.
3/4. Your problem is not really with Hyper-V. It's with IP.
Your machines are all able to communicate with each other because they're on the same switch and the same subnet. No gateway is required. If you have a computer with an IP of 192.168.1.8 and its subnet mask is 255.255.255.0, then it will be able to communicate
with any computer on the same switch with an IP of 192.168.1.anything. It's when they need to talk to computers off of that subnet (anything that doesn't fit the 255.255.255 mask) that they have a problem. For that, you need a gateway somewhere. You can't
use "DC" for the gateway because it's not performing routing services.
You have two choices.
One is to use an external switch so that your guests are directly connected into your physical network. That will take over your WiFi adapter, so you'll probably want to set the share option so your Win8.1 box continues to function. Then just use a common
IP subnet with everything else on your home network.
The second is to set up a software router. If you are using an internal virtual switch, then this has to be in the Win8 environment. I might be mistaken, but I think that
Internet Connection Sharing would even work for this. If you are using an internal virtual switch, then your Win8 system should see two (or more) adapters. One of them is the physical adapter (we'll call it wNetAdapter) and one would be the virtual adapter
(we'll call it vNetAdapter) it uses on the virtual switch. Once you set up ICS, you would have all of your VMs use the IP address that you assigned to vNetAdapter as their gateway.
Eric Siron Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
"Every relationship you have is in worse shape than you think."

How connect with a HTTPS Server?

Hi,
I have a problem. I need to connect two portalComponents with HTTPS.
Did anyone know how could I do this?
That is the code I have till now:
          try {
               URL urlInspector = new URL("https://xxxxxxxxx");
               HttpURLConnection conn = (HttpURLConnection)urlInspector.openConnection();
               conn.setDoOutput(true);
               conn.setDoInput(true);
               conn.setRequestMethod("POST");
               conn.setUseCaches(false);
               conn.setRequestProperty("Content-type","text/xml");
               conn.setRequestProperty("Connection","Keep-Alive");
               conn.connect();
               BufferedReader inStream = new BufferedReader(new
               InputStreamReader(conn.getInputStream()));
The error log says that :
java.lang.NullPointerException
at org.w3c.www.protocol.http.HttpURLConnection.connect(Unknown Source)
Thanks.
Edited by: F. Kiene on Aug 5, 2010 10:35 AM

Hi,
I have a problem. I need to connect two portalComponents with HTTPS.
Did anyone know how could I do this?
That is the code I have till now:
          try {
               URL urlInspector = new URL("https://xxxxxxxxx");
               HttpURLConnection conn = (HttpURLConnection)urlInspector.openConnection();
               conn.setDoOutput(true);
               conn.setDoInput(true);
               conn.setRequestMethod("POST");
               conn.setUseCaches(false);
               conn.setRequestProperty("Content-type","text/xml");
               conn.setRequestProperty("Connection","Keep-Alive");
               conn.connect();
               BufferedReader inStream = new BufferedReader(new
               InputStreamReader(conn.getInputStream()));
The error log says that :
java.lang.NullPointerException
at org.w3c.www.protocol.http.HttpURLConnection.connect(Unknown Source)
Thanks.
Edited by: F. Kiene on Aug 5, 2010 10:35 AM

How connect old Cinema Display

I have one of the first Apple cinema displays. I have been using it with an old G-4 computer. It has a 30 pin plug. Can I connect if to a new Macbook Pro?
How do I do it?

No, sorry, maryo2222. They had these a few months ago here, so maybe you will be luckier where you are. The box is about 8" x 10" in case someone offers one to you. White of course. If you don't have any luck with the stores, you might try eBay or something like that. The price was about $150 (calculating from the price here).

TS3147 How connect printer to the printer driver in system preference?

I have an Epson SX600 printer, of which the software can't be found when Apple does the automated thing. However, it is part of the 1.4 gig that you can download from this site. Once unpacked, how does one actually install the driver for the printer? There's a long list. But how do I make System Prefernce actually go look in that directory, instead og going online? It states in System Preference that Apple has the software and it can be downloaded, but once I try that, it comes back with a message that the software/driver is NOT available for download.
I keep going around in circles...
So: I now have the drivers downloaded in a package of 1.4 gig. Those are placed in my Library on my "Macintosh" folder.
How do I connect the driver to the printer in System Preference?
Thanks a milion!
Aernout

OK, follow these steps:
1. Add Printer, i.e. click on +. In my examples, I chose Canon MP 250, which is installed (deleted it, and put it back)
2. Ignore the default choice, and go to Select Printer Software
3. Choose manually the driver

How connect client to mySQL via SSL

Hi,
I created client in Swing/AWT and configured mySQL. How can I configure my client to enable connection via SSL (not necessary with certificate). I have to switch on field in driver JDBC, but that'a all? How can I verify if connection is really encoded?
Damian

Hi,
I created client in Swing/AWT and configured mySQL.
How can I configure my client to enable connection via
SSL (not necessary with certificate). I have to switch
on field in driver JDBC, but that'a all? How can I
verify if connection is really encoded?
DamianTo find out is the connection really encoded, there is a software called
ethereal - http://www.ethereal.com
which can monitor all the packets on your pc.

How connect rfc servers in a HA environment?

Hello folks
We are setting up a HA installation consisting of a clustered DB/ASCS package and a bunch of non-HA dialog instances.
Now my question is, how do you connect 3rd party applications like for example business connectors, kofax topcall (a fax solution), archiving solutions from imtf or external job schedulers like $universe to that system.
They either connect to a gateway as registered server program or they act as rfc client connecting to the SAP system with user and password. Now i was explaining the concept of message server logon groups to everybody. The result in most cases is a confused smile.
I am afraid we end up configuring those tools to one single application server, which renders it a single point of failure.
Does anybody have a similar environment? Remember we have only a central services instanz without gateway and workprocesses. How did you solve this problem then?
Cheers Michael

Taken from the sample saprfc.ini from the original SAP rfc sdk.
Here is the saprfc.ini for client (we addidionally use a saprouter here):
/*===================================================================*/
/* Type B: R/3 system - load balancing feature                     */
/*===================================================================*/
DEST=MY_DEST
TYPE=B
R3NAME=SID
MSHOST=/H/saprouter/S/3299/H/mshost
GROUP=SPACE
RFC_TRACE=0
ABAP_DEBUG=0
USE_SAPGUI=0
We decided to add a standalone gateway on the SCS server for registered server programs. Here is the saprfc.ini for rfc servers (registering at a gateway):
/*===================================================================*/
/* Type R: Register a RFC server program at a SAP gateway          */
/*           or connect to an already registered RFC server program */
/*===================================================================*/
DEST=MY_DEST
TYPE=R
PROGID=MY_PROGRAM_ID
GWHOST=gwhost
GWSERV=sapgw0x
RFC_TRACE=0

How connect to MS SQL Server

Hi to All,
this is my scenario.
I have in my LAN two Server; on the first server exist a Web ASP Application based on MS SQL Server DB.
On the second Server I have Oracle DB 10g and AS Forms and Reports.
Can I install on the second server only the run-time of SQL Server that point to remote DB ton the First Server, in order to connect Oracle DB to SQL DB through HS?
Thank You and Best Regards
Gaetano

no need to install SQL Server runtime.
HSODBC uses the SQL Server ODBC which is part of the MDAC or even on newer OSes part of the OS itself.
So if the Oracle db is running on Windows 32bit just go ahead with the HSODBC configuration. A document how to do this can be found on Metalink.
If your Oracle db runs on Unix the OS must be AIX, HP-UX RISC, SPARC Solaris or starting with Oracle 10g Linux 32 bit that offers HSODBC support. You will then need a 32bit ODBC driver for SQL Server (for example Data Direct) to establish the connection.
Other possibility would be TG4MSQL which is indepandant from the Oracle AND SQL Server. So you can install it on any 32bit operating system and it can be contacted from any Oracle RDBMS on any platform and will establish connection to SQL Server on any other machine.

How connect 10g with discoverer (host name give me error)

hi master
sir i install discoverer but not connect with oracle 10g
i flow this step
1. From the Start button use Programs | Oracle - BIToolsHome1 | Configuration and Migration Tools | Net Configuration Assistant.
2. Select Local Net Service Name Configuration the click the Next button
3. Check Add then click the Next button
4. Type the Service Name of the database you want to connect to, then click the Next button
5. On the next screen, select TCP and click the Next button
6. On the next screen, enter the full name for the Host name using a fully qualified domain name and then tell the system which Port the database is using. Click the Next button
7. If you know a username and password on the database select Yes, perform a test and then click the Next button. While this is not a mandatory step it is well worth doing as it will show whether you can connect to the database.
8. On the next screen, the test will either succeed or fail. If it says Invalid username / password click the Change Login button and enter a known username / password combination
9. When informed Connecting... Test successful click the Next button
10. Provide a name that you want to know this connection by then click the Next button
11. When asked if you would like to configure another service name, select No and click the Next button
12. Click the Next button again
13. Click the Finish button
but Host name or step 6 give me error
this is my database name == universi
this is my computer name == fahim
this is my system user password == mfa786
how i configure my discoverer with oracle 10g
please give me idea
thank's
aamir

thank's for your reply
sir try to configure but host name step not success
and i try to test
then taht window give me this error
see errir
Connecting...ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
============== this is my bi path
C:\oracle\BIToolsHome_6\network\ADMIN
this is my tnsnames.ora file
# tnsnames.ora Network Configuration File: C:\oracle\BIToolsHome_6\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
UNIVERSI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fahim)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = universi)
================ this is my listener.ora file
# listener.ora Network Configuration File: C:\oracle\BIToolsHome_6\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\BIToolsHome_6)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fahim.iqra.edu.pk)(PORT = 1521))
when i try to run my discoverer that give me this error
unable to connect fahim@universi
failed to connect to databae - ORA-12514: TNS: listeer dose not currently know of service requested in connect descriptor
please give me idea how i connect my oracle 10g with discoverer
thank's
aamir

How connect to wi fi?

Similar Messages

Maybe you are looking for