How ConnectionPool works in RAC?

For example, we create a ConnectionPool .if one of the instances in RAC is down, and some connections in ConnectionPool just connect this instance, then this connection become invalid. Can ConnectionPool automatically eliminate this connection from the pool?
If happened, How can I deal with it?

Similar Messages

How Load Balance works in RAC?

Hi All,
I have a 2-node 10gR2 RAC on RHEL4. One of our web based application is connecting to the RAC database. Today, while starting up the application, one of our node(node1) was down and all the connections from the app are connected to the DB using other node(node2). There were around 120 connection from application. Again, i brought back the node1 but still, the connections were on node2 and no connection on node1.
My doubt is, how the load balancing works in RAC? is there limit like after some number of connections, it will load balance to other node?
Thanks,
Praveen.

If all the connections go to node 2 cause node 1 is down, then, when node 1 comes back, those connections already established on node 2 will remain on node 2. There is no mechanism to migrate existing connections. However, over time, as more connections come in, they should go to node 1. Over time, the load should balance out. But, the only way to immediately rebalance would be to force existing connections to recycle their connection.
If one node is capable of handling the load, I wouldn't worry about it....over time, things will balance out.
-Mark

How to backup oracle RAC filesystem

Hello,
May anyone in this community might help to answer on my inquiry on how to backup oracle RAC filesystem. There are many backup features available out there i.e: RMAN, hotbackup etc but the way the backup is working is RMAN will backup and stored the db file in the filesystem. I presume the filesystem also need to be backed up in order to avoid the filesystem corrupted etc
Regards

Hi,
Always welcome ..
when you want to take backup of all the database components of RAC, that's why i advised you to include the all commands in your backup strategy, so that in any case your any components doesn't work , you can restore the particular one .
One thing you can do , you are running your RAC environment on Vsphere , in that case , create a backup plan with the client and your IT team to take backup of whole environment by creating snapshot of Vsphere along with backup plan mentioned by me in above reply , so in worst scenario your whole environment can be restored .
I have seen that if RAC environment is running on VMware , then its best to take snapshot of whole machine which should be defined in backup policy apart from normal backup of database.
Thanks
Shivendra Narain Nirala

How to work with both desktop and Surface pro 3

Hello,
I have a desktop for my normal use of Adobe Creative Cloud for Photoshop and Lightroom. I have my lightroom catalog on a separate external drive. I just got Surface pro 3 to do Adobe on it. I am now confused on how to work on Surface and how to access my Lightroom catalog.
Thanks for your help.
Mo

Just install Lightroom on your Surface Pro, plug-in the external drive, and double-click the LR catalog file.

How to work with 360 video?

I am new to AE and am trying to work with a 360 equirectangular video I shot with a Freedom 360 and 6 go pros.
Are there any tutorials on how to work with 360 spherical videos? Do I need to download additional plugins?
Thank you,
Phil

Phil,
Of course, the image needs to be big for this, but the plugin you would use is CC Sphere.
Drop your movie into a composition and apply CC Sphere to the video.
Then set the Render option in the effect to "Inside".
Under Shading set Ambient to 100% and Diffuse to 0%.
Then scale inside the effect until the image fills the screen.
Then you'll be able to use the Rotate Y controls in CC Sphere to spin around inside your video!
You can also add Optics Compensation and Reverse the Lens Distortion to straighten out your image.
Let me know if you have any questions!
Trent

Hey Guys, from Germany. I want to connect my iMac 21" with my Tv just for fun. Does anyone know, how it works. With a Hdmi adapter?

Hey guys! I want to connect my Imac 21 " with my Tv just for fun. Does anyone know , how it works?

Selecting the correct adapter and cable depends on which year model iMac you have and what inputs the TV has?
Check the User's Guide that came with your iMac or your Spec's at > Apple - Support - Technical Specifications
to see if your iMac has a Mini-DVI or Mini DisplayPort and then select that adapter with the correct connection for the TV.
Example: if you have a 2010 or 2011 iMac and an HDMI ready TV, then you would want the > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.)

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the thief logs out of iCloud. Would we able to locate the macbook?

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the person who has stolen my macbook logs out of iCloud.
It should work fine for iPhone/iPad because we can enable "Restrictions" to prevent the user from signing out of iCloud. Do we have simialr settings for the macbook?
Thanks,

If it's not on the device list, it indicates that someone has gone to Find My iPhone on icloud.com and manually deleted it from the device list (as explained here: http://help.apple.com/icloud/#mmfc0eeddd), and it has not gone back online since (which would cause it to reappear on the device list; Find My iPhone has been turned of in settings on the device; the iClolud account has been deleted from the device; or the entire devices has been erased and restored.
Unfortunately, there's no other way to track the phone other than through Find My iPhone. You could call your carrier and see if they would blackliste it so at least the theif couldn't use it.

I need to change my apple ID because I'm changing my email address. I'm worried that when I do, I'll no longer be able to use my first generation apple tv unless I change the apple ID there as well. Does anyone know how this works??

I have to change my apple ID because I'm changing my email address. (I have a Comcast address and am switching to U-verse) I'm worried that when I do, I'll no longer be able to use my first generation apple tv unless I change the apple ID there as well. I'm also trying to find out if changing my apple ID is going to interfere with getting my itunes content on my computer and my iphone. Does anyone know how this works??

My iTunes appleID is an old defunct e-mail address - it does not have to be functional.
Do what Winston says to ensure you keep getting correspondence related to that ID.
AC

HT3209 how many times i can watch the show after i purchased on i tune and how this works

I was just wondering if sombody can help me with this because i am new to itune . I would like to know how it works after u purchase tv show , do i have to pay once and watch more time or i have to pay every time i watch . Thank you in advance .

I was just wondering if sombody can help me with this because i am new to itune . I would like to know how it works after u purchase tv show , do i have to pay once and watch more time or i have to pay every time i watch . Thank you in advance .

On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?

On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?

http://support.apple.com/kb/HT4236

I no longer have access to my icloud email and don't know the answers to my security questions. Does anyone know how to work around this to reset my icloud ID without losing my info? I haven't backed up in a year because of this.

I no longer have access to my icloud email and don't know the answers to my security questions. Does anyone know how to work around this to reset my icloud ID without losing my info? I haven't backed up in a year because of this.

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(123381)

I pad 2 updated to iOS 6.1.3 and now wifi is greyed out. Apple support engineers say replace but my warranty exited 09/12. Funny how it worked perfectly fine before the update.

I just updated to6.1.3 and now my wifi button is greyed out. Apple support said it is a hardware issue. Funny how it worked just fine on the previous iOS. Now apple wants me to buy a replace not because my warranty expired 09/12. Seems to me like ios6.1.3 was an update to sell more products. Tried all suggested fixes with no success. With all the noted issues with ios6 there may be another class action lawsuit coming. Apple tech senior advisor unwilling to help. First advisor told me just buy a new I pad. Second advisor wants me to pay for a replacement. Can someone explain to me how an apple approved software upgrade that damaged my i pad is classified as my fault. I've seen some shady selling techniques but this one takes the cake in my book. Anyone have the contact information to higher up executives in apple for me to speak with about my issues?

Have you check the following?
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings
Ensure that your device is using the latest software.
If your issue is still unresolved, perform a software restore in iTune

How IE works for flat file

Hi all:
As we all know that, when IE gets a idoc's service name from SLD, then use it with idoc's message type and Idoc type to do receiver determniation, what about flat file ? how can we know its Service name and interface name if there is only a flat file on FTP? how IE works for Flat file ?
Couldn't thank you more

Hi,
For any idoc scenarious, you would use business systems rather than business service which is stored in SLD. So the IE would fetch it from SLD at runtime.
For file based scenarious also, you can create business system as type third party and use the same.
Is that answer your question?
Regards
Krish

Better process for introducing new features and explaining how they work

There are all kinds of new features being added to the Creative Cloud app but knowing what they are and learning about how they work isn't the most user friendly process. The current process is read the release notes after updating to a new version. The release notes should hyperlink to the related features in the product help. It would be great if there was a "What's New" section for the Creative Cloud app itself with new releases which included an introduction to new features just like there is for the desktop products.

This is a poorly explained reason about why is so important having a loupe in Photoshop. I've not also, used the best example, but I will. This belongs to the ADDITIONAL FEATURES: Loupe/Magnificator View:. Also, I will try to make my english clrearer, but here it goes:

How does works default parameters in a program with logical database PNP?

Hi Friends,
I have a basic program, i need to filter info with period parameters in a program that uses logical database PNP, but it doesn't work.
If i use "person selection period" that it's suposed to filter info according to infotype 0001 (as the sap help says), it doesn't work, i use: PNPBEGPS = today and PNPENDPS = today, and the result it's a lot of registers that doesn't meet that criteria.
Also i tried with: data selection period, today, up to day, current month. And the result it's with the same problem.
How does works period parameters in a program with logical database PNP?
This it's the program example, i use the default category.
REPORT ZRPHRTEST.
tables: pernr.
infotypes: 0001.
start-of-selection.
get pernr.
write: pernr-pernr, p0001-begda, p0001-endda.
end-of-selection.
write 'fin'.

Hi,
Define pernr table under tables statement then and use GET PERNR event.This get event is followed by End-Of-Selection.
Syntax: Tables pernr.
Get pernr.
Try, activate and test. This should solve your problem.
Regards,
Abhijeet

How ConnectionPool works in RAC?

Similar Messages

Maybe you are looking for