How Content-Aware Fill can help with Video | Short and Suite | Adobe TV

Content-Aware fill in Photoshop is a powerful tool for generating clean plates in Premiere Pro. Karl Soule’ provides some examples.
http://adobe.ly/zpuKyy

Great idea that I can definitely apply to some video that has a similar (set of!) problems. Thanks Karl!

Similar Messages

How content-aware fill with smart objects

I've done a (hopefully) fairly exhaustive search, and don't see anything on how to use these things together...
Open an image as a smart object. Add a layer for cloning and healing. Maybe add a curves adjustment layer and/or a hue/sat adjustment layer. Adjust things as needed.
Decide you want to extend the background on one side. Increase the canvas on that side. Select the chunk of canvas. What process should be used to employ the content-aware fill for that new piece of canvas? I don't seem to be able to have the smart object layer selected. If I have another layer selected the fill fails saying there aren't enough opaque (?) pixels.

Oddly, I can't even find any discussion on this anywhere... There's got to be a better way than what I've tried so far.
At present the only way I've found is to
duplicate the smart object
rasterize it
select the part to fill
do the content-aware fill
leave the selection on and copy/paste the selection so it's on a new layer
delete the rasterized copy of the smart object
There's gotta be a better/smarter/faster way than this... How are other people doing this?

HELP WITH VIDEO FILES AND PUTTING ON ITUNESSS!!!!!!!!!!

hey...i need help with my video ipod and itunes....i recently had sum problem with my ipod and i had to restore it...and when i hooked it up to itunes all the songs got back on it...its just that the videos never got updated with the songs....the videos are converted and were workin fine....now when i select the folder to put it into the itunes it says processing and nuttin happens...this is drivin me crazy anyone know how to fix this ****??
THX
5g ipod video

ok...i just uninstalled itunes and installed the previous version...and it worked fine....

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

Suddenly content aware fill is UNaware?

SUDDENLY this is how content aware fill works, or rather does not.
Any ideas? Thanks

You've given it an image with a white border, and expect it to know that the white pixels aren't desired. It can't really know that.
You could put the image on a layer, use the Magic Wand tool to select the white, expand the selection just a little, then delete it. Content Aware Fill knows that transparent pixels aren't candidates for being used to reconstruct parts of the image.
Or you could use layer masking. Similarly, Content Aware Fill won't use parts of the image that are masked off to fill other parts.
Hope this helps.
-Noel

Content aware fill functionality in PSE 9

The press release for PSE 9 states "the Content Aware Fill technology introduced with Photoshop CS5 is one of our most exciting innovations ever, so we’re thrilled to be able to make it accessible to photo and video enthusiasts in this latest Elements release" and that "the content intelligence in the Spot Healing Brush" has been "adapted from Photoshop CS5’s celebrated Content Aware Fill feature".
In what way does this functionality as implemented in PSE 9 differ from that in PS CS5? Clearly it's not the same functionality otherwise the press release and product description would say so. Has it been crippled in any significant way or just implemented differently?
This feature is the only reason I would upgrade to PSE 9. Can anyone with direct experience please confirm whether or not I would be disappointed?

You know, I completely forgot that there's a free action you can download that will enable the content-aware patching:
http://www.elementsvillage.com/forums/showthread.php?t=60535&page=6
(link in DAK's post).

Blurry Content Aware fill

I hope someone can give me advice to get a better result with my image. (PS CS6, Windows 8)
I was trying to remove a horse from an image using content aware fill. Every time the filled area is blurry and you can see the outlines very clearly. Here are the steps I took:
On copy of background layer roughly select the area to be filled with the lasso tool (settings Feather 0 px, Anti-alias unchecked or checked, makes no difference)
Edit-fill-Content Aware, Opacity 100%, Mode Normal
I can't remember Content Aware fill giving me blurry results before, and wonder what I'm doing wrong.
I tried using the patch tool, but that gives me a blurred edge around the patched area (no matter what the adaptation setting is).

Dag, I wonder if that would happen? Doesn't CAF try to make an inteligent best guess at where to draw the source pixels? It would be helpful to see a screen grab of the entire workspace, but I'm thinking something very wrong there.
A trick you can do when CAF is sourcing from unwanted areas is to make rough selection of the area to be filled, along with the areas you are happy to be drawn from. Copy that selection to a new layer, and run CAF on that layer.
But upload a full screen grab for sure.

Remove a logo from a video clip with content aware fill?

I know you can remove logo in photos using content aware fill, but you can't do it to a video clip. You can only do it to a frame, but you can't apply it to the entire video. I know photoshop is not a video editing software, but having this sort of feature makes sense for photoshop users especially with content aware fill.

I'm a career software architect engineer of 35 years, and I have to side with Howard on this one.
Like Howard, I feel you're thinking about this way too simplistically. Trying to work out what best to fill a part of an image with in 3 dimensions (x, y, and time) and have it look believable almost boggles the mind, especially thinking of a general case (your logo example is far to simplistic in itself). The task is far from a simple looping repeat of what is being done 2 dimensionally on a still frame. Frankly, it's more likely related to what's done with CGI, where scenes are modeled in 3D (4D actually) so certain elements can be replaced believably.
Think about it... If CAF is presently replacing part of an image with something it finds through some heuristics in another part of the image, and the stuff in that part of each frame is changing - and it would, because this is video, not still imagery - then it will select differently every time. What makes you think it would select something that even resembles what it selected for another frame? What you'd end up with is a frame by frame mishmash that would just make the outline of the selection obvious.
Regarding CAF applied to individual frames, then your finding the result isn't coming out as expected in all the frames of the video (e.g., when you're testing this concept) may indicate a problem with the way you're using the tool, or possibly even a bug. You might want to describe step by step what you're doing and show the result you're [not] getting.
-Noel

White lines using Quick Selection Tool in conjunction with the Content Aware Fill.

When using quick selection tool in conjunction with the content aware fill i get a white line where the image join is.
How do i stop this from happening?
Basically, i need the select tool to 'over select' into the next photo so its a seamless fills.
This isn't a complex seletion, its a photomerge with blank, white areas that i am filling in using content away fill.

thanks for your help.

Content aware fill - how to sample from small area?

Is there a way how to sample from small area and then apply content aware fill to the much more bigger area? For example - there is an object on a table. The object fills 90% of the image and the table 10% image. Now, I just want to delete the object. But that doesnt work with content aware fill, because the area around it is much smaller. Is there a solution for this?

I am not sure that CAF is the right tool if you want to fill a large area sampling from a small area. You might get away with doing it in stages
One trick is copy just those areas you want to sample from, to a new layer, and use CAF on that layer, but without seeing your image, it is difficult to say what the best aproach is going to be.

Removing Print from a Photo with Photoshop CS5's Content-Aware Fill

If I have a whole line of type on top of a photo a clients sends me and I want to remove it, can I mark the whole line off with the Healing Brush Tool and proceed? Or do I need to select each letter individually?
Thank you.

I was able to remove the whole line of typ at once and have Content-Aware Fill do its magic to the whole area where there'd once been type.

Content-aware fill with multi-colored background?

I've got a webpage footer to edit and I don't have the .psd file so I'm trying to use content-aware to take out an unwanted part. Problem is, the background isn't one solid color and the area where I'm making the edit has a diffinitive color change...it's an actual line dividing the footer into two sections. So, whenever I do the content aware fill it doesn't keep that line or the colors the way they "should" be.
Is this a situation where having the .psd file is a must?
Thanks for your help!
PS CS5 version 12.1 x32
Mac OS X 10.6.8

I used the lasso tool to select first one colour area. selected the Brush tool so I could Alt click on the background colour, and Alt backspace to fill the selection. Then I inverted the selection (ctrl Shift i). Used the lasso with the ALT key to remove the red area from the selection. Resampled the other background colour, and Alt backspace to fill.
I did wonder if there was more going on in background because the tiny graphic you uploaded has some artefacts and I was not sure if they were supposed to be there, but a simple graphic like that is an easy thing to create from scratch. When I have to include a logo in magazine artwork, and only have a horrible little sample that I couldn't bare to put on the page, I enlarge it to a useful size, and use it to trace a nice, new, clean graphic from scratch.

How do i do content aware fill

i need help with content aware fill in windows vista for cs5

I'm moving your post over to the Photoshop Windows forums. Photoshop.com is an online service for uploading, basic editing, and sharing of photos.

Can't get Content Aware Fill in CS5 to work as advertised in many tutorials...

I have tried unsuccessfully to get Content Aware Fill in CS5 to work as advertised in the dozens of tutorials I have watched. I have used many of the techniques, but unless the background is a simple one, CAF seems to drag in stuff from all over (even if I protect it in a mask) the background. Is there some special trick I am not aware of?

That doesn't work as advertized. Make your selection save it with a name as a Channel. When Content Aware Scale is now selected, I get a bounding box around the selection. Enable Protect and nothing changes. The bounding box is still there and is the only part of the image that will respond and not even as Content Aware. It just moves around. I've tried it over and over with the tutorial open so I could follow and the only difference I can see is he is on a Mac.
What I want to do is stretch so here is the steps;
Make a new Layer the size of the finished image. Move the image into that. You have a white space ready to be filled. Select the protected area. Save as Channel with Name. Go to ContentAware Scale. A Bounding Box immediately appears around the selection. That is the only adjustable part, not the entire image.
See Images.

Content from my Apple TV only displays on about 50% of the screen on my 40" 1080p flatcreen. How do I fill the screen with content?

Content from Apple TV 2 only displays in about 50% of the screen on my 40" 1080p flatscreen. How do I fill the screen with content?

Check TV remote for an aspect ratio control (occssionally zoom) and set to 16:9.

How Content-Aware Fill can help with Video | Short and Suite | Adobe TV

Similar Messages

Maybe you are looking for