How could i activate BI-Content for SPP

Hello
How could i activate BI-Content for SPP.
I only find the reoport RSBCT_BICONTENT_ACTIVATE. But it does not work for SPP
I geht the following message:
Finished starting the activation. Please check the application log with external ID BI Content Installer (SCM)
But in the sm 37 i don't find anything.
Thanks
Sven

Hi MadissonStudios.
Thanks for the time you took to try and help me out.
I can't access the link (even correcting the double '//' or the space in the link.
I've followed your sugesttion and tested it but didn't work. The hover state is always for the top layer (z order) and the hover state of the image fills over the text. If I put the text over, it covers the image. Grouping didn't make a difference.
Maybe I'm getting your indications wrong, but without access to the file, I don't see another way I could have done it any different.
Thanks once more.

Similar Messages

  • How could i activate my Ipad 3 with a forgotten icloud account?

    How could i activate my Ipad 3 with a forgotten icloud account?I tried recovering my password but I could not also remember the informations i used when icreated the icloud account. Any help please...

    Go to http://www.apple.com/support/appleid/ and follow the links for forgotten Apple ID and password.

  • HT201441 I have IPAD 2 AND I forgot the password and my e-mail and I'm the previous owner of the device,how could I activate the IPAD again ?

    I have An IPAD 2 AND I forgot the password and my e-mail abd I'm the previous owner of the device,how could I activate the IPAD again ?

    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If necessary... See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    Or try Apple ID FAQs  >  http://support.apple.com/kb/HT5622

  • How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

    How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

    Whilst I appreciate your responding - I do not think this helps with what I was enquiring (at least not without further explanations anyways).
    I am aware of, and do use, the function - System Preferences > Keyboard > Text - for various replacements like (tm), (c), etc .... and also for fractions like 1/2, 1/4, 1/3.
    However, my question was in relation to SUPERSCRIPTS for dates / numbers - namely, superscripting numerical suffixes for things like 1st, 2nd, 3rd, 4th,
    So - please help - HOW do I set this up ? If indeed it is possible without System Preferences > Keyboard > Text ???

  • My server is reliance in india,how could i activate my i phone 4s?

    my server is reliance in india, how could i activate my i phone 4s?

    Contact Reliance and ask them.

  • How to add a related content for a particular document in UCM

    Hi All
    How to add a related content for a particular document in UCM. On which table it stores all the related document details. Can anyone suggest me a document which helps me to know how to add related contents for a document
    With thanks and regards
    Anoop

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

  • Error in step Activate BW content for RCA

    Hi Experts,
    We have upgraded solution manager  7.1 system from SP06 to SP11.
    Facing issue in
    Solman_Setup -> Basic Configuration -> Configure Automatically -> Activate BW content for RCA.
    This step is going to error and not showing any log details in screen.
    also ccms_bi_setup job not getting scheduled in the system.
    We have performed below steps already:
    all previous steps completed sucesfully.
    T-code: RSTCO_ADMIN: showing activation sucessful.
    Also downloaded latest version for sap roles SAP_BI_E2E and SAP_SM_BI_PROCESS and assigned to user "solman_admin",which is used for performing solman_setup.
    Please provide your inputs to resolve this issue.
    Thanks & Regards,
    Kavitha

    Hi,
    We have generated the profile and did user comparision as well and status is green.
    Also logical system and RFC NONE exist and works fine.
    I have already done activation along with replicate in RSA1, but issue remains same.
    we are not getting any error details ....so there is no clue what is happening.
    When execute this step . one background job starts "SMSETUP: DIAG_SM_BI_SETUP" and getting finished.
    below is job log for this.
    Job started
    Step 001 started (program RAGS_SISE_ACTIVITY_JOB, variant &0000000000542, user ID SOLMAN_ADMIN)
    Imported p_act_id:DIAG_SM_BI_SETUP
    Imported p_sp:25D45C7EDB553AA28239056775FF3E2AA71B0122
    Activate BW content for RCA started
    DIAG_SM_BI_SETUP for system SMP~ABAP~100 ended
    Job finished
    But ccms_bi_setup not getting scheduled after this, step goes to error state.
    Thanks & Regards,
    Kavitha

  • How do I activate creative cloud for photography on a second computer, ie my laptop/

    How do I activate creative cloud for photography on a second computer, my laptop?

    download the cc desktop app to your laptop and use it to install your ps and lr programs, Download Adobe Creative Cloud apps | Free Adobe CC trial

  • Hello , how could i insert some content into a large file?

    hello , how could i insert some content in a large file? ----just like a txt editor do.
    assume that i have a 6G file(i think it large enough), then i wann insert one ascii character at the begining of the file,does that means:
    1> i need create one 6G+1byte new file, then copy all content of the original file following by that addition character?
    2> not creat new file,just set original file length to 6G+1byte,then offset all 6G byte by one byte,after all adding my one character?(it seems not some kind of optimization ...)
    what should i do?
    Edited by: littleJohnny on Jan 16, 2008 2:03 AM

    could some means can set the read hint of 6Gbyte content after my character first read out? ----just let my addition point to the begining of 6G original content ,then the addition character take the place of the file header? ----the inster may be the same....
    i just think the already used txt editor seem so fast to process insert, replace .... 2M 10M maybe.... does they doing those operation use Java Type ---String? ------read all contet into memory,then it is easy to regular expression ,relinking read order....-----does it mean large file couldn't against with pattern?
    does all ctrl+s shortcut-----rewrite original file with memory relinked order? then large file could not easily manipulate its structure but all structured file is large than plain format...
    just teach me some "already used txt editor " trick,thanks very much.

  • HT1311 My account registered in Malaysia, but currently I'm in Indonesia and using local sim card, how could i download an update for any application purchased?

    My account registered in Malaysia, but currently I'm in Indonesia and using a local provider sim card, how could i download an update for any application purchased in my iPhone?

    Apple takes a few days to bill your credit card. By removing to information the next day Apple could not bill you therefore creating the predicament your in. Try contacting iTunes support so they can help you resolve the issue.
    http://www.apple.com/support/itunes/

  • How could i set fixed heights for all of my web pages?

    I want fixed heights for all of my web pages.Do i have to set any margins for my footer?Because by adding some contents in between header and footer ,then the footer goes down.How could i have fixed height pages?

    You may like to have a fixed footer as in
    #footer {
       position:fixed;
       left:0px;
       bottom:0px;
       height:30px;
       width:100%;
       background:#999;

  • How do I install additional content for Illustrator

    I'm having a similar issue. I successfully installed the CS 6 Suite from the .exe and .7z file pair, but there are two additional files, Illustrator_16_Content_LS16.exe and InDesignFamily_8_Content_ALL.exe, that were part of the download package from adobe.com. Aftre the CS6 install, I moved on to these two files. They extracted their contents to the Deskop into Illustrator and InDesign folders, respectively, and then nothing further happened. There is no Setup.exe in either folder, so I'm wondering if I'm supposed to move the contents of each to the appropriate program folder in Program Files. Any ideas on I should proceed? Were the 2 .exe files silently picked up by the CS 6 Suite install and the extracted folder contents are already installed appropriately?

    Moving this discussion to the Illustrator forum.  You may also want to post your inquiry to the InDesign forum - http://forums.adobe.com/community/indesign/indesign_general for how to utilize the additional content available for that program.

  • How to clear the table contents for the new selection values?

    Hi,
    Im developing some very basic web dynpro applications.I have created one application to demonstrate use of SERVICE CALL.Now in one of the COntext Nodes,I have one attributes as TABLE.I have 2 input fields and when i enter any sel critteria in these 2 fields,the table is populated accordingly.Now when i change the value in the input fields,the new output gets appended in the output TABLE.How do I clear the contents of the OUTPUT table attribute  in the method?
    Can someone tell me the common methods used with context nodes like REFRESHING,CLEARING etc?How do I know which methods to call for what action of the nodes ...like for binding internal table to any context node we use the method BIND_TABLE...
    Any inputs will be highly appreciated.
    Thanks!
    BR,
    SRM tech.

    Hi,
    To clear the contents of the node, use invalidate method.
    data: l_node type ref to if_wd_context_node.
    l_node  = wd_context->get_child_node( 'NODENAME' ).
    l_node->invalidate( ). " all the data in the node will be cleared
    To clear a single attribute you can use set_attribute_null.
    Regards,
    Radhika.

  • How do I activate captivate 8 for a user using a license purchased by the organisation he works for?

    Hi,
    The organization I work for recently purchased a license for Captivate for one of its users.  I have the license certificate, and the user has the trial software installed on his home machine. which is where it will be used   How do we activate the software on his machine?

    Hi There,
    You can activate Captivate 8 by launching it and clicking on License This Software and enter serial key to activate the product.
    If it is an annual subscription then it can only be activated by sign in with adobe id and password under which the license has been purchased ( No serial key is required. )
    If you face any issue in activation then please reach out our support by calling 800-833 6687 follow IVR options 2 > 4 > 2 or can also chat with an expert by click on the following link :-Contact Customer Care
    Note:- Please do not post serial key here on Forums.
    Regards,
    Ajit

  • How could be calculate only result  for cummulative value in Webi level?

    Hi Expert,
    I have to requirement on webi level only result calculation
    scenario below like that
    Company code            % X
    100                      10
    200                      13
    300                      15
    Result           = only cummulative   (not sum eg 38)
    So how could be achieve  only this result value ??
    Pls advice
    Regards
    Waseem

    Hi,
    Gaurav and Arijit,
    Thnks for reply
    I have to need only Result values . I am giving one more scenario like that
    Company code         M               J                     L             D %
    100                              70              30                     10             = 10/(70+30)*100 = 10
    200                              80              20                     13           = 13/(80+20)*100 = 13
    300                               150             50                    30            = 30/(150+50)*100 = 15
    Result                                                                                    =    L/(M+J)*M = 53/400*300 = 39.75
    I hided the values M , J and L , need only result value above scenario so how could be achieve
    pls reply
    Regards
    Waseem

Maybe you are looking for