How Could i change the editable path by programmatically?

hi,
I have created JTree in which u can see the FileSystemView by using customized TreeModel This TreeModel is extends from DefaultTreeCellRenderer for getTreeCellRendererCompenent. I am displaying FileDisplayName in TreeView but not the exact absolute path but when i am clicking for renaming the path it is giving absolute full path. But what i want is it has to show only the name of the folder. Any ideas?? Where i am missing the way???
Thx n advance,
silluva.

Changing the language in the App store involves changing the language of the device. To do so go to Setting>General>International> Language> then select the language you want to use. Hope this helps.

Similar Messages

How can i change the default path of installation

I had creative cloud for a while. Today i changed the default installing folder, from the creative cloud settings/prefferences(can't remember) menu, from C to D. Then i uninstalled all the programs from adobe cs6 to take the new cc programs. When i want to reinstall adobe creative cloud it is installing on D and since there is no operating sistem on D i can't install the creative cloud. It keeps installing on D. How can i change the default path of installation if i uninstalled creative cloud?

Or how can I change the prefered installation folder that can be changed from creative cloud menu/prefferences when i have uninstalled creative cloud?

How can I change the installation path of JWS?

I have to install the JRE 1.4.0_01 in silent mode on Windows XP. For the JRE I can set the installation path in the corresponding dialog and record it in an *.iss file. When starting the silent installation the JRE is correctly installed into this path but the Java Webstart installation procedure doesn't care about this path and installs JWS in 'D:\Programme\Java Web Start'.
How can I change the installation path for JWS?
J�rg

Verify Free Disk Space. Assuming you are installing the OS to the C: drive.

How could I changed the permisson to allow oracle user to do FTP

Hello All,
I am doing FTP from sun box to SuSE linux -- /usr/local/bin/wits.
I'd like to FTP files from Sun box--- /usr/local/bin/wits to SuSE Linux ----/usr/local/bin/wits.
FTP
get
filename (remotely & locally)
permisson deniedIt says permisson denied.
On other hand I am able to FTP in /tmp.
How could I changed the permisson for /usr/local/bin/wits to allow oracle user to do FTP in above directory?
oracle@dhshrwits:/usr/local/bin> ls -l
total 12
-rwxr-xr-x 1 oracle root 2316 2004-08-31 22:32 coraenv
-rwxr-xr-x 1 oracle root 2415 2004-08-31 22:32 dbhome
-rwxr-xr-x 1 oracle root 2548 2004-08-31 22:32 oraenv
drwxr-xr-x 2 root root 48 2004-10-01 08:38 wits
Regards,
D

login as root and chown wits to oracle

How can I change the folder path to my library

I just changed the file path to my locally stored music from C:\MyStuff\...\iPod Nano Music\... to C:\OneDrive\...\iPod Nano Music\...
Is there a way I can edit the path that Apple has locally stored to redirect iTunes to the new, correct location instead of (as I've had to do previously) deleting all the music files in iTunes and then adding each music folder back?
In Advanced Preferences the 'iTunes media folder location' shows as C:\Users\Mark\Music\iTunes\iTunes Media with an edit button. However this is not the location of all my music files (as indicated above).
Mark

If you want to move your media to a new path what you should do is edit the media folder preference in iTunes and then consolidate to that new path. Moving the media first by hand and then trying to fix iTunes is generally the wrong approach.
Your options are to move everything back where it came from, then consolidate to the new path, then delete the originals that iTunes leaves behind. Alternatively you should be able to use my FindTracks script to reconnect the relocated media to iTunes. See this post for an explanation of how it works.
See also Make a split library portable for reasons why splitting the media folder to a new path may be undesirable.
tt2

How do i Change the bookmarks path

i have another bookmarks folder on the desktop, i want to change the firefox path and link it with the folder i've created on my desktop, so i can see it on the bookmarks sidebar in firefox windows, and add/edited/customize it if needed

How do I import, export or back up bookmarks?
https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks#w_how-do-i-import-export-or-back-up-bookmarks
Check and tell if its working.

HT1918 How could I change the credit card number on file?

Recently I have send for a book. Looking at the card n file that is not the one I would like to maintain . How could I change that card?

http://support.apple.com/kb/HT1918
Regards.

My browser dowloads everything automatically in MyDocuments. But, for security reasons, I need to setup a different download path, to a different location, where I keep my personal files. How do I change the download path? Thanks, Dan.

My Firefox 3.6 is setup to download anything automatically in MyDocuments (which I never use).
For security reasons, I designated a different location on my hard drive, where I keep my confidential files.
How do I change this downloading path? I tried to change it by going to "Tools-Options-Save Files To", but it does not work.
Thanks,
Dan.

Do you have any extensions that might interfere?<br />
See [[Troubleshooting extensions and themes]]
Does it work if you select Tools > Options > General : Downloads : "Always ask me where to save every file" ?
Your above posted system details show outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r42
# Java Plug-in 1.6.0_03 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

How could I change the name of Short Name?

I have some trouble on name creation on 10.4. I am a computer admin in my company. Everytime we bought new Mac, I will give a Short Name to the computer which is a part of new system setting. My difficulity is, I need to change the name frequently when the machine swap to a new user. How should I change the Short Name instead of reinstall the system?
Thanks a lot for your help!
Felix

To change an account's short name, log in from an administrator account and then open the NetInfo Manager application in the /Applications/Utilities/ folder. Change the old name to the new name in the admin group, as well as that user account's name and home properties; don't alter or delete any other accounts, groups, or properties. Next, open the /Users/ folder in the Finder and rename that account's home folder so that it has the new short name. Log out and back in.
(11684)

How do I change the default path assigned by Lion?

Hi Everyone!
Out-of-the-box, in Finder, the Favorites sidebar, the path for Pictures is: Macintosh HD>Users>vbbuilt>Pictures.
Note: vbbuilt is my user name
I just bought a new external hard drive and have moved all picture files to that external drive, including the iPhoto Library.
How can I change that path to: External Hard Drive>Pictures ?
In other words, when I click on Pictures in the Finder Favorites sidebar, I want to be sent to that Pictures folder on the EHD.
Thanks! Vince.

This all goes back to my original problem in this forum thread.
1. I moved ALL files to an external hard drive.
2. I WANT to retain Lion's icon image representing the Pictures, Music, and Movie Folders
3. I WANT to rename Lion's default path for those original Pictures, Music, and Movie folders so that they point to their new locations on the hard drive.
4. The default Pictures, Music, and Movie Folders cannot be replaced - I tried that. The OS-X does not allow deleting the existing folder. I can place a new folder in the Favorites in the Sidebar, but the graphical representation of that folder, in the sidebar, cannot be changed. I tried that too and does not work. I can replace the image with a new graphic from the Get Info pane. But when I <option> drag n' drop that same folder into the Favorites on the Sidebar, that new substitute graphic does not show up. The default Icon for a folder is shown.
Any thoughts on how to get around all these problems?
Thanks, Vince.

How could I change the effects pedals in say, British Metal?

I am fairly new to MainStage and purchased it because GarageBand was too limited for my recording needs. I also did not like the huge amount of latency in GarageBand. I know in GB you could switch out (software) pedals to customize the sound. How can it be done in MainStage 2?
Thanks, in advance, for any help any of you can provide,
José Mauricio Cuervo. . .

Hi Bruno!
I'd like to know how to change a pedal in a setup like Brown Sound. For example, how can I change in "British Invasion Clean" the "Hi Drive" Box for a another like "Fuzz Machine" or "Phase Tripper"?
Is it possible?
Thanks for your response,
Jose Mauricio Cuervo. . .

How could I change the heade in Flash Help

Hi everybody,
I am pretty new to this forum, that is I just began to probe
with RH7, and it is going well so far, because of your help and the
technical service's help from Adobe.
I tried different layers to see which one is the most
appropriate for my project, and the Flash is very interesting.
However, I would like to put a logo or a text in the header
(the coloured one), and I have no clue how, and what tool I should
use.
Is anybody familiar with Flash Help tweaking?
Thank you,
Bogdan

I'm not familiar with the .fsw file type. Where are you
finding that file? Is it named skin_background_tb?
Try searching for skin_background_tb.fla in your project's
source files. I think .fla is your best bet.
It's been long enough since I've started a brand new
FlashHelp project that I can't remember if the "FlashHelp Default"
skin is included in the project automatically or if you have to
generate the layout with a skin from the gallery before any Flash
skin files appear in your source files. If you haven't done so
already, open the FlashHelp layout dialog, select a skin, and
generate the layout. Once you've done this, you should see a folder
within the !SkinSubFolder! directory that has the name of the skin
you selected. That skin folder should contain all the .fla and .swf
files for the skin. Those .fla files are the ones you would edit to
change the skin. (Whenever you edit a .fla file, you then export it
as a .swf movie to that same skin folder, then generate the layout
again to see the results.)

How do you change the afp path "server" name on a non-server version of OS-X?

I'm talking about the name listed after "afp://" which is shown at System Preferences>Sharing>select "File Sharing" on left, look at text under the words "File Sharing: On" where the text starts with "Other users can access shared folders on this computer... at "afp://xxxxx" where xxxxx is the name I'm referring to. I think this is the "server name" position in the file path. Looking at a couple of other Macs, they seem to normally use the "Computer Name" here, but on my 2008 Mac Pro running 10.6.8, it seems to be stuck with an earlier version of a Net-Bios name I used, and I can't get it to change regardless of what I now do with the computer name or the Net-Bios name.
Any help is greatly appreciated!

Try power cycling your router, as it is most likely returning that name when asked to translate the IP address to a name.

How do i change the image path at run time in wpf ?

I have a button and i need to show image two different image based on condition.
<Button x:Name="btn" MouseEnter="btn_MouseEnter_1">
<Button.Template>
<ControlTemplate TargetType="Button">
<StackPanel Width="43">
<Image Name="btnS" Source="Resources/main.png" />
</StackPanel>
<ControlTemplate.Triggers>
<MultiTrigger>
<MultiTrigger.Conditions>
<Condition Property="IsMouseOver" Value="True" />
<Condition Property="IsEnabled" Value="True" />
</MultiTrigger.Conditions>
<MultiTrigger.Setters>
<Setter TargetName="btnS" Property="Source" Value="Resources/hover.png"></Setter>
</MultiTrigger.Setters>
</MultiTrigger>
<MultiTrigger>
<MultiTrigger.Conditions>
<Condition Property="IsPressed" Value="True" />
<Condition Property="IsEnabled" Value="True" />
</MultiTrigger.Conditions>
<MultiTrigger.Setters>
<Setter TargetName="btnS" Property="Source" Value="Resources/audio-push.png" />
</MultiTrigger.Setters>
</MultiTrigger>
<Trigger Property="IsEnabled" Value="false">
<Setter TargetName="btnS" Property="Source" Value="/Resources/disabled.png" />
</Trigger>
</ControlTemplate.Triggers>
</ControlTemplate>
</Button.Template>
</Button>
I want to change the source of btnS at run time bases on condition.
Suppose that if a = 1 then
btnS source is "Resources/main.png" this
else btnS source should be "Resources/main1.png"
same for mouse hover and enable disable triggers.
Thanks,

Hi Sumit,
We can use
VisualTreeHelper class to find Image control in visual tree.
UIHelper.cs:
public class UIHelper
public static T FindChild<T>(DependencyObject parent, string childName)
where T : DependencyObject
// Confirm parent and childName are valid.
if (parent == null) return null;
T foundChild = null;
int childrenCount = VisualTreeHelper.GetChildrenCount(parent);
for (int i = 0; i < childrenCount; i++)
var child = VisualTreeHelper.GetChild(parent, i);
// If the child is not of the request child type child
T childType = child as T;
if (childType == null)
// recursively drill down the tree
foundChild = FindChild<T>(child, childName);
// If the child is found, break so we do not overwrite the found child.
if (foundChild != null) break;
else if (!string.IsNullOrEmpty(childName))
var frameworkElement = child as FrameworkElement;
// If the child's name is set for search
if (frameworkElement != null && frameworkElement.Name == childName)
// if the child's name is of the request name
foundChild = (T)child;
break;
else
// child element found.
foundChild = (T)child;
break;
return foundChild;
Code Behind:
private void Button_Click(object sender, RoutedEventArgs e)
Image image1 = UIHelper.FindChild<Image>(btn, "btnS");
if(image1!=null)
image1.Source = new BitmapImage(
new Uri("Resources/main1.png", UriKind.Relative)
Screenshot:
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How could I change the Invoice date automatically in MIRO?

Of course, I can change it manually. But the user want to calculate the due date in their own way---we have a special way to calculate the due date. So, I am looking for User-exit where I can write ABAP codes to recalculate the invoice date and cover the default invoice date, so the system can get the right due date by calculate the invoice date in the standard way.
Did anyone have any experience in change the invoice date??Pls tell me. THKS!

You can use the badi MRM_HEADER_DEFAULT.
(See in transaction SE18)

How Could i change the editable path by programmatically?

Similar Messages

Maybe you are looking for