How could I configure Email in output determination

hi
The client wants to send the Output to cusotmers Email , can u pls tell me how could i configure the E mail in output determination
Thanks in advance
Regards
Dinesh

Hi
SAPconnect provides a standard interface for external communication, which supports sending using telecommunication services, such as FAX, pager (SMS), Internet and X.400, as well as sending to printers and between several SAP Systems. It enables external communication components to be connected to the SAP System. 
As of Release 6.10, SAPconnect also provides a direct connection to the Internet using the SMTP plug-in of the Web application server. This enables you to send messages directly to Internet addresses, without using an additional external communication system. As a result, it is also possible to communicate with SMTP-compatible fax gateways or paging gateways, which do not have to be set up specifically for the SAP System, as well as external fax and paging service providers.
See the Useful Note for configuration and setup
Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
Note 455127 - E-mail (SMTP) in different SAP releases
Note 634006 - ICM messages explanatory note
Note 517484 - Inactive services in the Internet Communication Framework
Note 63480 - R/3 and MS Exchange linking
Note 633265 - SMTP PlugIn: Multi-codepage ability
Regards
Anilsai

Similar Messages

  • Config to email using output determination

    Hi,
    I'm trying to set up output determination that will email a PDF of the invoice at the time of invoice creation.  I've created a communication strategy with a single entry for communication method "INT" for email.  I added an entry for simple mail(7) in the processing routines config of the output type and pointed to my sapscript form and print program.  I created the master data record using VV31 and added my own email in the communication section of the master data record.  When I create my invoice, the correct output record is determined, but when it attempts to process at save, the system returns with errors in the processing log.  The error message states "No communication type from strategy RD00 could be used".  The diagnosis section of this error message says that the message type should be sent with a communication type, but I don't understand why this information is not pulling from the configuration that I set up.  Any help would be greatly appreciated!
    Jim Tollett

    Hi James,
       Every output type has a driver program (and subroutine combination) configured for each communication medium. Usually what you are looking for (email PDF) is not supported by most of the standard output types. You may need to write a driver program for this communication medium (7) or enhance the standard to support simple email.
    Cheers,
    Sanjeev

  • Step by step on how to set up email as output type

    Hello everyone,
    can someone pls help me with the configuration and the steps I have to do to set up email as output type for order confirmation, delivery and shipping. Also can you tell me the programs and forms I have to select from in the condition type. Do I need to get the ABAP guys involved and what do I ask of them, how finally is it interfaced with the email. Please give me step by step for the configuration and any other set up I have to do. I am working on ECC 6.0 and I need all the help I can get.
    Thanks

    Hi,
    Please go through this link it will help you about Output process in SAP R/3 for sales documents and billing documents.
    http://help.sap.com/saphelp_47x200/helpdata/en/93/745017546011d1a7020000e829fd11/frameset.htm
    I hope it will help you,
    Thanks,
    Raja

  • How to organize/configure email accounts on iMac

    I'm a brand new Mac user, and I really would appreciate some opinions on how to efficiently organize/configure my email accounts.
    -previously on Windows XP at home and work, I had an 'office email' address and and a family email address at home that I could access from both computers Iie: all mail went to both locations off the server). Now, I have the iMac at home with a subscription to MobileMe (which I also find a little confusing), the office laptop on Windows and I will have an iPhone in about a week.
    My thinking is that I would like to be able to access both work and home emails on the iPhone, and now keep the home and work computers separate. Will this create too much redundancy on the iPhone? I'm just now sure how to best set this up, so I'm wondering what you other users out there do. Also not sure if MobileMe would be useful or best suited for this.
    Thank you,
    Rom

    Since you already have Mobile Me, you can keep all your mail "there" (in the "cloud" as they say -out there on Apple's servers) and access it from any of your devices / computers, or any web browser on any computer at any time.
    You don't need to "keep" your mail in any once place. Let Apple handle that, you can send & receive from your iMac, your iPhone, wherever. All your devices / computers will "sync up" with Apple's Mobile Me servers and keep everything up to date for you.
    Also, if you have exiting accounts that you don't want to stop using, you can use Mail on your iMac and Mail on the iPhone to send & receive from any POP or IMAP mail account (I suggest IMAP -it's the kind that syncs mail where POP just downloads copies to whatever computer you happen to be on). You just need the appropriate server / login information.
    For example, I have 4 email accounts for various reasons. 2 Gmail, 1 Mobile Me, and 1 on a domain name I bought (myname.com). ALL that mail is accessible on my iMac, my MacBook and my iPhone at any time.

  • How do you configure vi to output the mean from instantane​ous data?

    Hi,
    I am trying to configure my vi to calculate the mean as the data is being read by the computer. I have tried storing the data in an array and then using the statistics option to calculate the arithmentic mean to no success. I have the vi set up to output the data as it reads it onto the screen. It seems like the array is not storing the data, instead I am getting the same value for the mean as for the data.
    Any ideas?
    Thanks,
    Sumit.
    Solved!
    Go to Solution.

    Hi,
    Thanks for the response.
    I am collecting and storing torque and rpm data. I am trying to find a way to output the mean rpm and mean torque in the front panel.
    Please see attached vi and pic to for my attempt at solving this problem. So far nothing seems to be working.
    Thanks,
    Sumit
    Attachments:
    2_RPM and Torque_Blade test_mensor_with blocks_bnew.vi ‏451 KB
    problem_block.PNG ‏9 KB

  • How to trigger change notifications in output determination?

    Hi Experts,
    My client want to trigger the changes of the PO as below for the existing output type. Pls help me in the steps to do and figuring out the possibility of the below:
    1. any changes done in the PO should be able to print in change notification alone if required.
    2. if required should be able to print entire PO (including changes).
    is both of the above are possible for the existing output type Or need to be configured other output type.
    Pls help me in all the steps to do the above.
    Thanks
    Sri.

    What i gave was the default output type for SAP.
    If you are using the Z output type, then
    Go to Transaction MN04 - Enter ZXXX - Select the Key combination based on your requirement - Enter the data as 1 in Medium and 4 in the Dispatch time.
    This will trigger the output if any changes done in the PO.
    But if you are using custom form for printing, then that form should be in a position to accept the values being changed in the PO.
    Eg: If you are adding a shipping condition in the PO, based on transaction MN04, it will print. But to make shipping condition value to appear in the PO printout, you have to make sure the form was using that field. You need to check with the Abaper to verify those fields.

  • TS4083 How do I configure emails to appear read in both an iPhone and on my PC

    Once I read them on my iPhone they show as read there, but they're not updated as read if I then access the emails on the iPad or PC

    You would need to be using an IMAP or exchange email account to have that.  POP/POP3 accounts will not do what you want.  If you are using one of these, you would need to change to an IMAP account such as iCloud email, Gmail or Yahoo.

  • Output determination for sales order via email notification

    Dear All,
    Can some one provide  me  a  step by step configuration guide for Output determination via email notification.
    I would appreciate for your prompt response.
    Thanks
    ANGKS

    Hi there,
    For getting output Email or any media you have to do output determination. output determination is also carried by Condition techniques.
    Configuration path: (following are the steps)
    1) SPRO-> IMG-> Basic Functions-> Output Control-> Output Determination-> Output Determination using Condition Technique- >Output Determination for Sales Documents .
    2) Create Condition Table: select the field Sales Doc Type from field catalog & Save
    3) Maintain Access Sequence: 4-digits code & description. 
    4) Assign condition table to access sequence. Select Accesses line item and Go To Fields. Fields will display the fields we have selected in the condition table i.e. sales doc type. Maintain Output Types:BA00: Order Confirmation Select BA00 & Copy & Rename. Give the same 4-digit code as given to access sequence. You Can Maintain: Languages of Output Partners (to whom you need to send output) Print Program- print specification Sap Script- layout Assign Output Types to Partner Functions: go to new entries & assign your output type to partner functions. Maintain Output Determination Procedure: V10000 (Standard Procedure)here you select communication medium Email.
    Go to new entries and create your own 6-digit code with description. Select the procedure, go to Control Data. Here mention the output type i.e. condition type and leave requirement and manual only columns as blank. Determination Rule: link the 6-digit procedure code to doc types. Create Condition Records: VV11. Select document type and click on Communication. Mention partner function, medium, time. Output device: LP01, Spool request Name: SD_003, Suffix 2: order_confir & flag on print immediately. Once you press enter you will come across 2 key combinations: Sales organisation/ Customer Number: fill SO, Customer No, Partner Function Abbreviation, Partner to whom the output should be sent, time, medium, language. It contains: Sales Orgnisation, Customer, Partner Function (The abbreviated form of the name that identifies the Partner) (During output determination, the system determines the recipient of the output from the master record for the specified partner function. In this field, you can explicitly specify a recipient that will override the standard partner. There must also be a master record for the partner that is specified explicitly.), Medium, Time & Language.} Order Type: Document Type, Partner Function (abbreviation), Partner, Medium, Time & Language. Path For Output Determination For Sales Documents: Logistics -> Sales/distribution -> Master data -> Output -> Sales Document -> Create (t-code VV11) Path for Output Determination
    I hope this will help you.....
    Regards
    Deepak

  • Output determination for purchase order

    Dear friends,
    Please help me, how to create condition record for both printout and email for output determination of standard PO.
    I have created condition record through MN04 for Purchase order with medium(external send) and it worked.
    I also need to create condition record for printout. Because Client wants to select either email,fax or printout. They will select whatever sending option.when i tried to create condition record for medium(1-printout).I got an error " The condition record entered already exists". So i tried to change that condition record,but i got here also error as "The condition is being processed in the current session".
    Please help me to set up condition record for both mail and printout for standard PO.
    Thanks

    For this kind of option you need diff message type like
    use NEU for Fax and Print and for Email create new message type than it will work.

  • Print HU label from Outbound delivery using output determination

    Hi,
      We have a business requirement to print HU labels from outbound delivery. The steps followed are
    1) User executes VL02N
    2) User clicks on packing
    3) Material is entered to pack. HU is automatically generated.
    4) After saving the delivery, output message is triggered.
    Output determination is as follows
    1) An Z output type is created.
    2) Form entry and smartform name is assigned to this output type
    Issue:
    The issue is when the output message is triggered and the code in the form entry is executed, the handling unit (from nast) is not yet committed in the database. Since it is not updated in the database table, we cannot get any handling unit data to be printed.
    Any inputs on how to print HU labels using output determination from outbound delivery is appreciated.
    Thanks,
    Sandeep

    Hi Surya,
         Thanks for the reply. But, my question was how to print labels from VL02N when i pack a material on this delivery.
    Regards,
    Sandeep

  • Output Determination-- Reprocessing

    Hi
    If we have done with output once then i dont want to get output next time , can you help in configuring this in output determination
    Thanks
    Mahesh

    While configuring the Output type, there is an indicator " Multiple issuing".
    <b>Multiple issuing of output</b>
    Indicates whether the same output may be issued to the same partner more than once.For example, if you add an order item to a sales order for which the order confirmation was already sent, you will want to send a changed output to the same customer.
    If you DO NOT tick this indicator, then the system will NOT allow a repeat output issuing.
    Hope this helps.

  • Steps to Configure email in Hyperion Reporting and planning.

    Hi all,
    I am new to Oracle hyperion. we have one requirement to configure email for reports and planning. so can anyone please give me detailed navigations on how can I configure email.
    Thanks in advance.

    These are not in SharePoint. those web.config are in ADFS server. 
    http://social.technet.microsoft.com/wiki/contents/articles/4184.ad-fs-2-0-auto-populate-the-username-field-of-the-forms-sign-in-page-when-signing-in-to-office-365.aspx
    Modify FormsSignIn.aspx.cs
    1. Open FormsSignIn.aspx.cs for editing
    2. Find the following and set your cursor to the next line down:
        using System;
    3. Paste the following code:
        using System.Web;
    4. Find the following and set your cursor to the next line down:
        protected void Page_Load( object sender, EventArgs e )
    5. Paste the following code:
        HttpCookie cookie = Context.Request.Cookies.Get( "Office365Username" );
         if ( null != cookie && !String.IsNullOrEmpty( cookie.Value ) )
                 UsernameTextBox.Text = cookie.Value;
                 cookie.Expires = DateTime.UtcNow.AddDays( -1 );
                 cookie.Value = "";
                Context.Response.Cookies.Add( cookie );
    6. Save and Close FormsSignIn.aspx.cs
    Test
    1. Launch Internet Explorer and browse to
    https://portal.microsoftonline.com
    2. Type the username and tab to the password
    field to cause the UPN suffix detection to trigger
    3. Select the link which takes you to sign in at your AD FS 2.0 Federation Service
    4. Observe the forms-based sign-in page presented to you. You should find that the username field is populated with the value used on the Office 365 sign-in page.

  • How do i configure DSN connection to database Programmatically

    Hi to all,
    Can anybody assist me as how could i configure DSN connection to database Programmatically.
    Thanks in advance.
    Regards
    khiz_eng

    Hi DrClap,
    Many thanx for your advise, i have also done with MS-Access but now i wnated to have with .csv value, how i am going to have this .I have searched the whole JDBC forum already unable to find for .csv
    Please provide me and solve my problem
    Thanks in advance.
    khiz_eng

  • How Could I assign Trunk on 6505 Switch Interface

    Hi,
    I am Facing a problem about assigning specific interface on 6505 switch as a trunk port that could pass specific tagged vlans, I would like to know how could I configure this interface as layer 2 interface and assign trunk that allows specic tagged vlans.
    thanks

    Hi,
    Creation of vlan is common for all catalyst 6500 series.
    For Creation,
    set trunk mod_num/port_num [on | desirable | auto | nonegotiate] negotiate
    For assinging specific vlans
    set trunk mod_num/port_num vlans
    http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_guide_chapter09186a00800eb755.html#xtocid99228
    Rate if it does,
    Rgs,

  • Hi may i get some links to output determination materials

    Hi, I'm ABPER, new to SD. I am configuring EDI link between two systems, inorder to send delins. For that i maintain condition records...etc.
    Please guide with links or material to configure this. about output determination plzzzz...
    Thank you very much in advance...
    Ciao,
    David

    Hi David,
              Please go through this link it will help you about output determination
    http://help.sap.com/saphelp_47x200/helpdata/en/30/c6853488601e33e10000009b38f83b/frameset.htm
    I hope it will help you
    Regards,
    Murali.

Maybe you are looking for