How could I copy an image under labview and to stick it right A side of old

copying shapes and stick them x times after knowing that one will differemment modify the color of each shape, I have Imaq Vision Builder

I'm not sure I understand what you are trying to achieve. Will you please clarify the question? Also, what version of LabVIEW and Vision Builder are you using?

Similar Messages

  • How could I arrange control images in a report?

    I appended 4 control images to a report using Append Control Image to Report. I wanted to lay two of these images in the first line and the other two in the second line. But the result of my program was one image in one line. (BTW, I did not use any New Report Line). How could I arrange control images?

    Mike is right, unless the images are too wide, the report VIs will put them next to each other on the same line.
    Please find the attached example that appends two charts on the HTML report. Open the .htm file with the web browser. If you make the browser window smaller, the charts will move one below the other.
    Zvezdana S.
    Attachments:
    image.zip ‏13 KB

  • How do I copy one image onto another image?

    How do I copy one image onto another image?

    Lots of ways;  Use the Place command to place a file in another.  Open two files and drag one to the other's window tab, drag an image from bridge onto an open file.  Open an image, press ctrl/cmd-A to select all, the ctrl/com-C to copy the image, the ctrl/cmd-V to paste it into another image.

  • In pages,how do I copy an image to a new location by click & drag?

    in pages,how do I copy an image to a new location by click & drag?

    To MOVE an image to a new location, Click and Drag the image.
    To move a COPY of the image to a new location, leaving the original in place, pres and hold the Option key as you Click and Drag the image.
    Regards,
    Barry

  • How do i copy internet images to my mac desktop

    how do i copy internet images to my mac?

    A related tip: option+shift+4 will produce a cursor where you can drag a box to grab a screen image of an area.  It gets dumped to your desktop with a generic name.
    For that file too, you have to decide its ultimate destiny. 

  • How do I copy a photo from iPhoto and paste it into a text/Pages document?

    How do I copy a photo from iPhoto and paste it into a text/Pages document (using iMaC)?

    Use the Media browser in Pages and just drag the image over.

  • How do I cut an image in half and move the halves independently?

    How do I cut an image in half, and move the halves independently?

    Use the rectangular marquee tool to select half the image, then Layer>New Layer via cut. You can turn on the rulers and set a guide so you'll know the boundaries you want if you need it to be exactly half.
    If you want to also be able to move the other half, before you start double click the background layer in the layers panel to turn it to a regular layer.

  • How can I copy a double-sided document and make double-sided copies on an officejet 6830?

    how can I copy a double-sided document and make double-sided copies on an HP officejet 6830?

    Hi,The 6830 only provide double sided printing, it does not offer 2 sided copying, a such can only be done manually. You may find the printer specifications below:Scanning options (ADF): Single-sidedhttp://store.hp.com/UKStore/Merch/Product.aspx?id=E3E02A&opt=A80&sel=DEF#merch-tech-specs Regards,Shlomi

  • How do i create a gallery page that you can click on an image, expand it and move left or right to see more images?

    How do i create a gallery page that you can click on an image, expand it and move left or right to see more images?

    You may use slideshow widgets to achieve this. For more details : Adobe Muse Help | Working with Slideshow widgets

  • How do I get an image from Picasa and transfer it to photoshop to work on it.?

    how do I obtain an image from picasa and bring it to ps to work on it?

    Are you using a Windows system, and do you have File Explore set to show extensions?  I am wondering if the file name might look like:
    'Starbirds Picture.jpg.tiff'  ?
    The fact that you say the image looks different after reducing its bit depth makes me think you are right about it being 32 bit, but as Chris said, it can't be a JPG.
    Your computer monitor is not capable of displaying the full tonal range of a 32bit image produced by an HDR program like Photomatix or Photoshop, so it has to make compromises.  You have to chose what process to use to reduce its bit depth to give it the look you are after.  I prefer Photomatix for HDR.  If you install a trial version and open your 32 bit image in it, you can then chose one of the options to convert it to 16 or 8 bit.  These might be Tone Mapping, Exposure Fusion, or Tone Compression.   Tone Mapping is the option that produces the typical HDR look.
    But you are using Photoshop.  I haven't noticed what version you are using, but Google Photoshop (your version) HDR processing, and you'll see how to control the end look of the image.

  • Can I copy existing website (under Azure) and re deploy to create new one?

    I created website site with quick create /from gallery/WordPress, currently working and running under Azure.
    I would like to create additional websites and to use with the same files for the one is already running
    Meaning to copy all the files and re use them to deploy again as new website
    Can I copy existing website (under Azure) and re deploy to create new one?
    YCh7

    Yes you can.
    Install "Microsoft Web Matrix" on your Machine.
    Then go to the portal>web apps and select the one you want to copy. Then click on WebMatrix in bottom right. Your WebMatrix will pop up. Click "Edit a Local Copy".
    Thats the easy solution for creating a local copy and redeploying it.

  • On my screen the image is clear and the colors are right, However when I print to either my epson of HP the image color is off.

    On my Mac screen my photo image is clear and the color are right, however when I print to either my epson 2200 or my HP printer bother the colors are off and the image is not as clear as on the screen.

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Lightroom 4 does not recognize some older JPG images (that Picasa and ACDsee show all right).

    Lightroom 4 does not recognize some older JPG images (that Picasa and ACDsee show all right).

    What is exiftool??
    From: Rob Cole [email protected]
    Sent: Saturday, March 30, 2013 5:35 PM
    To: shaibeilis
    Subject: Lightroom 4 does not recognize some older
    JPG images (that Picasa and ACDsee show all right).
    Re: Lightroom 4 does not recognize some older JPG images (that Picasa and
    ACDsee show all right).
    created by Rob Cole <http://forums.adobe.com/people/areohbee> in *Photoshop
    Lightroom* - View the full
    discussion<http://forums.adobe.com/message/5192327#5192327

  • How could I do a thread with Labview?

    I'm doing a VI with inside a calling to a SubVI. How could the Top-level VI works meanwhile the subVI is working? The top-level VI has to work like a thread because it takes measures from the serial port calling a C DLL, so when I call the SubVI it has to take measures continuously (the VI shows a graph of the measures).
    Thanks in advice
    Davide

    If you go to the VI Properties, under the Execution menu selection there is a pop-up for setting the Preferred Execution System. This is as close as you can specifying a thread in LV.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How do I copy an image from pdf file using preview?

    I've done this before from the same pdf file but can't remember how I did it.  Does anyone know?

    I tried that and heard the camera shutter go off now how do I retrieve the image?  Where is it on my computer?
    Where did you check?
    Screen shots are suppose to be saved on your desktop.  See KB Article:  http://support.apple.com/kb/PH11229
    If that is not where there are going, do a manual search.  Check inside your Download folder for starters.

Maybe you are looking for

  • Removing Another iPhone from my iTunes account how to do it ?

    I Need Help . We Are Sharing Contacts

  • 24" imac luminance

    Hi .. i use my imac 24" (about 3 yrs old) extensively for photo-editing. i know these macs have a reputation for high luminance. i've done ok with calibrating my monitor by eye with the on board calibrator but decided recently to buy a spyder 3 pro.

  • With PSE 7 Unable to Open Organizer, Editor, Create, Share

    I am new to PSE7. I installed the program in Jun and have only played with it some.  Last night I used the program with no problem.  This morning I opened the program and the Welcome Screen comes up.  I am able to sign into photoshop.com.  However, w

  • Asfunction in browser

    Hello all, I have used the asfunction to call a webpage, when i test the movie within flash the button works perfectly, however when i publish the file the button does not seem to work when it is pressed. Is there some coding i need to allow it to wo

  • IPhone showing crazy colors on screen when recording video?

    I seem to be having a problem with my iPhone when I go to record video. I get this crazy colored looking screen (it shows up in the video and you can see it on screen when recording). Any ideas as to how to fix this? Thanks in advance, David