How could I create an BusinessObjects Auditor Database after installing the BOE?

Dear Folks,
     As usual,I can create a BussinessObjects Auditor and CMS Database at the same time.
     But now, I have installed the BOE without Auditor Database.
     How could I create an BusinessObjects Auditor Database?

Which version of BO you have?
if you are on BO 4.0 - Login to CMC- Select 'Auditing' and in the configuration, specify the Audit DB details. Once you enable Auditing, tables will be automatically created.
3.1 - Stop SIA on the server. Right click on SIA, Properties- Configuaration- Specify Audit DB details. Restart the SIA

Similar Messages

How can I get my safari to open after installing the new Mavericks operating system?

How can I get my safari to open after installing the new Mavericks operating system?

Thanks Carolyn. Unfortunately, this didn't work. It turned out to be in my display monitor as I have my computer wired to my tv for streaming. Once I changed the monitor display it worked fine. Go figure

How do you clear Error Message 3100? After installing the New inks, On NEW 'Canon MX432' Printer

Have NEW ‘Canon MX432’, (1)-followed the instructions to set language without problem, next step, checked for the Set ink cartridge Message, (2)-and then opened the Paper Output Tray and the Paper Output Cover.
On the second try; (3)-the Head Cover opened automatically, (4)-then lowered the Color Ink Cartridge Lever, (5)-Unpacked the FINE Cartridge and remove the protective tape, (6)-then Inserted the FINE Cartridge straight in until it stopped, (7)-and lifted the Color Ink Cartridge Lever.
Next did the same steps (8) - (9) - (10)- (11)-to the Black Cartridge, next (12)-Closed the Paper Output Cover.
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer, (14)-got error Message; ”Printer Error occurred”, then the numbers; “5100”.
Have tried unplugging the printer a few minutes and repeating the steps from the start to no avail.
Next will go buy new Ink and try again or return this Canon MX432 Printer, for a different Model.
Do not want to install new Ink Color and Black Cartridges until I understand the problem solution.
Have used Canon products for over 30 years never had this problem or any problems with their products which could not be resolved by me.
Steps Followed:
*** Do you see a problem with these steps taken? ***
(1)- Set language
Waited for the “Set ink cartridge” Message
(2)- Opened the Paper Output Tray and the Paper Output Cover
(3)-The Head Cover opened automatically
(4)-Lowered the Color Ink Cartridge Lever
(5)-Unpacked the Color FINE Cartridge and remove the protective tape
(6)-Inserted the FINE Cartridge straight in until it stopped
(7)-Lifted the Color Ink Cartridge Lever
(8)-Lowered the Black Ink Cartridge Lever on the left
(9)-Unpacked the Black FINE Cartridge and remove the protective tape
(10)-Inserted the Black FINE Cartridge straight in until it stopped
(11)-Lifted the Color Ink Cartridge Lever
(13)-Closed the Paper Output Cover
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer
(14)-Got error Message: ”Printer Error occurred”, then the numbers; “5100”

Hi Anselmo_MSW!
It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time.
The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:
1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
2. Make sure all ink tanks are seated properly.
3. Make sure all packing materials have been removed.
4. Make sure no paper is jammed in the printer.
5. Disconnect the printer cable from the printer.
6. Close the front cover and turn the printer off.
7. Unplug the printer from the power source, and then plug it back in after five minutes.
8. Power on the printer.
If the error returns, the printer will require service options. I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers. What I would recommend is contacting a Canon Representative using the following link to learn of your service options. Contact Us.

I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.

Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

How could I create a "Linked Server" link from SQL Server 2008R2 64-Bit to Oracle Database 11.2 64-Bit?

How could I create a "Linked Server" link from SQL Server 2008R2 64-Bit to Oracle Database 11.2 64-Bit?
Let's say the SQL Server and Oracle Database are in the same Company Internet Network.
I have the code, but I do not know how to use it. Such as what is System DSN Name? Where could I get it. What does it look like?
Do I need to install any Oracle Client Software in order to link from SQL Server to Oracle? Or SQL Server has the built-in drivers installed already that I can directly create a Linked Server from SQL Server to Oracle?
I need to know details. Thanks.
USE master
go
EXEC sp_addlinkedserver
     @server  = '{Linked Server Name}'
    ,@srvproduct = '{System DSN Name}'
    ,@provider  = 'MSDASQL'
    ,@datasrc  = '{System DSN Name}'
EXEC sp_addlinkedsrvlogin
     @rmtsrvname = '{Linked Server Name}'
    ,@useself  = 'False'
    ,@locallogin = NULL
    ,@rmtuser  = '{Oracle User Name}'
    ,@rmtpassword = '{Oracle User Password}'

You need an OLE DB provider for Oracle. There is one that ships with Windows, but it only supports very old versions of Oracle. Oracle has an OLE DB provider that you can use. I don't know if it's part of Oracle Client or how it is bundled.
You should not use MSDASQL or any DSN.
Erland Sommarskog, SQL Server MVP, [email protected]

How could i creat a feedback page in iweb?

how could i creat a feedback page in iweb?

You can set up a commenting section as mentioned here...
http://www.iwebformusicians.com/iWeb/Comments-Password-Protect.html
Example...
http://www.iwebformusicians.com/iWebMusicWebsite/Comment.html

How could you create 'Last Time Contacted' Smart Mailbox in Mail app Lion?

Hello!
For the purposes of maintaining regular contact with a large group of contacts in your address book:
How could you create a smart mailbox in the Mail App (Lion) which contained that last unique sent/received email from each individual contact?
So ideally just the last email per contact. For my purposes I would then sort by date and find the contacts I havent emailed in a while and re-initiate conversation.
I also thought that perhaps it would be possible through Automator? (I am not very familiar with how to use this app)
Any ideas/solutions would be very appreciated!
nmarks
(running lion 10.7.4 macbook pro late 2011)

Okay, I think I just discoverd a workaround. This will work if you're lucky enough to already have a smart-mailbox folder that persists after close. (Somehow I had two such folders that already existed and weren't subject to the mysterious disappearances on closing the app; perhaps I created them in a previous OS X release?) Anyway, here goes:
Locate an already existing smart mailbox folder that's working properly. Select the folder (in the sidebar).
Duplicate that folder using the "Duplicate Smart Mailbox" Command. (It's on the contextual pop-up menu or available via the gear icon in the lower left of the window). This should produce and exact copy of the folder and the boxes inside, appearing at the bottom of the smart mailbox list.
Edit the duplicate folder to put the smart mailboxes you want in it, and delete the previous mailboxes (duplicates) that you don't want.
The new folder structure should now persist between launches of the app.
There you go. Not the most elegant process, but workable. Don't know if there's a method if you don't have at least one smart mailbox folder already though.

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How can I create an active table of content in the sidebar to help readers to get to the section?

How can I create an active table of content in the sidebar to help readers to get to the section?

You can create bookmarks with Adobe Acrobat.

How can I create a new E-mail address for the Marketing Manager

Hullo,
how can I create a new E-mail address for the Marketing Manager (i.e. marketing professional role in SAP CRM) please.
That when you go and create a new E-mail campaign you need to choose an E-mail form in addition to the E-mail address of the Marketing Manager.
Kind Regards.

Hi Alhussien
Add it to his Position in the Organisational Model. Transaction PPOMA_CRM.
Under there address section is an option to populate the email address.
Regards
Arden

I want to create an "up to date" installation disk from my own one. So after installing the system shouldn't need to download any update. Is that possible? If so, how? Thanks.

I know how to make an installation disk without things that I won't use and that can be burnt in a single layer DVD. But I want to make one that would be up to date with all the updates that have been released until now included.
Is that possible? How do I download the updates? How do y include them in the DVD? I would be great if I don't have to isntall them manually after installing the macosx.
I think there should be two ways of doing so:
1.- Include the updates in the DVD and execute them after the system installation.
2.- That the installation itself were up to date.
Can anyone help me? Thak you.

I don't believe it is. TimeCapsule restore would be limited to the same platform it was backed up from?
I think what the OP is after is the idea of slipstreamed DVD including Snow Leopard *&* the latest combo updates. In the Windows world this is referred to as a slipstreamed install.
For example you could have the latest build of SL plus the latest combo update slipstreamed in and this should work flexibly across a number of platforms.
Unfortunately though I don't know if it's possible with OSX. It's a real time-saver in the Windows world though if you have a number of machines to deploy or if you're constantly building/assembling VMs for example.

How do I create an Lightroom HTML Gallery and preserve the - in the file name?

How do I create an Lightroom HTML Gallery and preserve the - in the file name?
The hyphen (-) is more search engine friendly, so I label all my photos using hyphens (-) to separate the keywords in the file name
Here's a sample file name - it's for the "Guess Where Berkeley" flickr site
guess-where-berkeley-serkes-xx-s-curve.jpg
I created a Lightroom HTML Gallery and posted it to the following link.
http://www.berkeleyhomes.com/tests/lightroom/lightroom-test-1/
Though it looksl like the HML gallery shows the original file name in the web page, it looks like Adobe Lightroom modified each photo's file name by changing the - (hyphen) to an underscore (_)
Originally
guess-where-berkeley-serkes-xx-s-curve.jpg
After Adobe created the HTML photo gallery the name became
guess_where_berkeley_serkes_xx_s_curve.jpg
Is there any way to preserve the – rather than the _ character
Thank you!
Ira Serkes

InDesign's interactive PDF support is a small subset of what you can do in Acrobat Profesional.
I think you probably want to create a button (or change an existing button) in Acrobat Pro that causes Acrobat to close the document -- that should be analagous to "exitting the CD." I assume your autorun file is opening the PDF in Adobe Reader? You have not included it and are not specific, so it is tough to say.
I believe in Acrobat Javascript you can close the document with this.closeDoc(). You'll probaly need to ask on the Acrobat forums (possiby Acrobat Scripting) for more detail.

How do I create a calendar like I did with the Appleworks Assistant?

How do I create a calendar like I do with the Appleworks Assistant under Starting Points? I don't see any calendar templates in Pages.

Pages doesn't have any such features. Pages do lack a lot that AW has. Nor can Number do it.
Go to iworkcommunity.com and search for a calendar template.

How do you create a flash in game popup on the same frame?

How do you create a flash in game popup on the same frame?
I need to make a popup in flash on the same frame. Basiclly like you reach the frame and randomly (I know how to do random stuff) a popup might appear saying like you got a prize; and I want the stuff in the back to stay the same.
Please help me!
Thankx in advance.

Whatever frame you intend to make this movieclip appear in, you first set it to be invisible using...
popupName._visible = false; // popupName is whatever instance name you use
And for whatever random code you use to trigger it to appear you just set the _visible property to be true...
popupName._visible = true;

How can I create a long employment form without making the form widget drag?

How can I create a long employment form without making the form widget drag?

Sorry Sachin, I mean that I created a simple form on the page from the widget and started adding fields to it. The more fields I add the slower the delay becomes in creating a new field. Even when I try to select and drag or move an item, there's a huge delay and sometimes the program feezes, loose what i've done and have ot restart.
I'm doing an enployment form that has more than 20 fields, at least, and I need to be able to build the fields in separate categories, like Education, Past Employment, etc... quickly without delay issues.
I can probably send you a snap shot of what I'm talking about if I cna post it or attach it here..?
~Andy

How could I create an BusinessObjects Auditor Database after installing the BOE?

Similar Messages

Maybe you are looking for