How could i get the material description in cost esti itemization view?

Hi Gurus,
I have created the process order (T.Code COR1) and calculate the cost & get the material costing details.but i required to see the material description (Packaging material) rather than the material code (PK01-1204) in costing itemization view.
E.g.
SAP Material Code: PK01-1204 - Description - Packaging material.
while checking the costing view  i had see the Material code PK01-1204 in itemization.but i required the material description (Packaging material) in itemization view.
Please help me to overcome this issue......
Regards,
Dhananjay R.

Dear Dhananjay,
You can have Material description in Itemization by following way :
Go to Itemization screen -
> Change layout ( On top you will find icon for this , below Display Itemization text)
In change layout you will see Filter icon ---> select Plant / Material Text by dropdown in it and save it so you will find material description in itemization.
Try above which will resolve your issue.
Revert in case any problem.
HOpe this helps.
Regards,
Tejas

Similar Messages

  • How could i get the selected node in the JTree

    getLastSelectedPathComponent() �returns the parent node of currenr selected, so how could I get the selected node itself in the JTree
    I will appretiate for any help!

    i think you can get by....
    TreePath treePath = tree.getSelectionPath();
    DefaultMutableTreeNode treeNode = (DefaultMutableTreeNode) treePath.getLastPathComponent();

  • How do i get the material type after submitting a create material request?

    Hi All,
    I have to select an agent depending on the material type of the material being created? I'm not using the rule based workflow for material creation in MDG 7.0, I'm using WS46000057. How do I get the material type being used in the workflow so that I can create a rule and select an agent accordingly from a custom table.
    Any kind of help would be sincerely appreciated.
    Regards,
    Tushar..

    Why not use the rule-based workflow template?
    Where do you want the material type? This is a standard workflow template and I'm not sure you can enhance it.
    In any case, in order to read CR details, you need to use the MDG API classes. These are described in this document: Master Data Governance Application Programming Interface Guide. Keep in mind that different API classes were developed for different releases so make sure to pick the class right for your release.

  • How could i get the dump/restore utility?

    I am newbie to arch, a stupid question
    when i use FreeBSD or other Linux Distribution, dump/restore is always the standard utility
    but i do not find them in pacman
    how could i get the dump/restore utility?
    thanks

    fukawi2 wrote:
    Ranguvar wrote:dump and restore are deprecated in Linux IIRC. Other utilites are available. There's even a quote by Torvalds where he disses them
    There's nothing wrong with the classics
    I think so

  • Dear Customer Service Team,  I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

    Dear Customer Service Team,
    I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
    Thank you for your help in advance.
    Kind Regards,
    G. Zsolt

    There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
    You may also refer below link
    Sign in, activation, or connection errors | CS5.5 and later

  • Two songs I downloaded have static on them. How could I get the songs cleaned up?

    I recently purchased some songs on itunes. Two songs I downloaded have some static on them. How could I get the songs cleaned up?

    Delete them from iTunes then download them again.
    Downloading past purchases from iTunes

  • How could i get the status of Purchase Oder's status

    Hi, Great ALL!
    Can you tell me, what I can to do.
    I need to do some check at purchase order in checking or saving time.
    If there are any mistakes, system could set some warning message or error message(like the following pictures:)
    1.[http://lh5.ggpht.com/dingdinghaochibao/SP3QkVca4VI/AAAAAAAAAHA/GjAd5ksg3Og/s576/Picture1.JPG]
    2.[http://lh3.ggpht.com/dingdinghaochibao/SP3QkeJgx1I/AAAAAAAAAHI/DfE6mvIOpm8/Picture2.JPG]
    Here is my question: How could i get those messages?

    a®s
    Thanks for your answer.
    But i still have one question. After i made a purchase order although there were one warning message given by system, i could not find any log by TR. SLG1.
    Is there any way to get those message by BAdi or exit?

  • How can I get the material consumption of the month for each specific Finished Good?

    (Sorry, I first opened this discussion in another space. I guess here's where it belongs).
    Dear Experts,
    This is the first time I open a discussion. I'm new at this. I've been reading for a couple of months your forums and certainly you've helped me a lot. Thanks for that. Keep it up! ^_^
    Now on business. Let me explain a bit about what I'm looking for.
    I've been looking for a report that shows me the material consumption of the month in quantities. Raw Material and Packaging Material to be more specific. Also I need to see the consumption of those materials by each specific Finished Good.
    For example, I know the consumption of Flour of all the month, but we use it for all our Finished Goods or SKU's as we call them, since we make cookies. How can I know how much Flour each Finished Good actually used?
    I've been trying with different T-Codes, reports, etc. The last thing I've got is using transaction MB51 and filtering movements type from 261 to 262. The beauty of this report is that shows me the Process Order number, since I can match the PO number to a Finished Good with another report from BI (or BEX, however you call it).
    Everything was fine until I found that there are some PO's that are not directly related to a Finished Good, but to a Semi Finished Good. In some cases I'm able to match the Finished Good, since the majority of Semi Finished Goods are uniques to a Finished Good. But there are three specific cases that are my problem right now:
    Cream X: We use it for three Finished Goods.
    X Syrup: We use it for all the Finished Goods.
    Refined X Sugar: We use it for three Finished Goods.
    So those three are Semi Finished Goods which are related to certain numbers of PO's I have on the report.
    In the end, with the report from MB51 I have all the list of materials (filtering only Raw and Packaging), I have the consumption of the month (filtering movements 261 and 262) and I have the PO number related to each material. Of course one material is listed many times on the report, but with different PO number.
    Then, like I said, I can match the PO number to a Finished Good, except in the cases where the PO is not matched to a Finished Good, but to a Semi Finished Good like the three examples I gave you.
    I don't know if there's another way to track the Finished Good having the PO number. I've tried T-Code COR3, but couldn't get too far.
    I hope I explained myself a bit clear and also sorry if my English is not so good.
    Thanks in advance. ^_^
    Warm regards,
    Rol

    Hi Rolando,
    If the purpose is to find the consumption of a material, you can get it from report "MC.9". Plz let me know if it's useful.
    Rgds,
    Sudheer.

  • How could I get the used rates of cpu and main memory

    I want to get the used rates of the cpus and the memeoy?How could I do?
    I write the code on linux and got them by read the file /proc/meminfo and /proc/loadavg.
    Is there the similar file under solaris?
    Further more , under the linux os, I could make a system sound with function ioctl,which function could make a warning sound in Solaris?
    Thanks a lot!

    For memory usage call vmstat. Can't help with CPU usage.

  • How could I get the pdf-file output to contain more than one page from certain homepages

    2011-08-22
    I have been using Firefox for many years now. I like this browser better than Safari. However. I have a problem when I have connected to a homepage over the web and want to write the content out to a pfd-file. The pdf-file does sometimes contain only one page. The material is good enough for two or more pages of output. I have checked that using Safari browser. I´d like to continue using Firefox so please tell med what to do!
    Göran Stille
    [email protected]
    Computer Mac Powerbook G4
    Processor 1.67 GHz PowerPC G4
    Operative system OSX 10.5.8
    Firefox version 3.6.2

    excellent.
    quiteimposing does exactly what i wanted.
    thanks a lot.
    now only problem is that demo version prints large x mark on pages
    is there any free plugins available or any other way to get rid of x mark.
    thanks in advance.

  • How could i get the kernel and user cpu usage for each process

    Hi all,
    In order to monitor the system CPU usage, I would like write a script to gather the kernel and user CPU usage for each process, like the prstat or top does. As always missing the shortlived kernel usage, prstat or top cann't get the precise CPU usage. I checked with the dtrace syscall, proc and fbt provider, but don't get which one is useful.
    Please provide your comments and suggestion.
    Thanks in adv

    mail2sleepy wrote:
    As I've studied the "dtrace" for a while, and seems Sun gives a pretty high score on this new feature.....I do want to know whether there's some probe can work for it, like writing a "dtrace" version prstat.You can write a prstat without dtrace. Because that's just polling at specific intervals and reading some process structures from /proc. You could have dtrace fire a probe every 5 seconds and read the same thing, but it wouldn't really be using any features of dtrace. Trhying to write it "in dtrace" doesn't make much sense.
    What you could do that would be harder via other methods is to fire a probe at process exit that displayed the process information including total CPU time. They could print exactly when processes exited. Doing that without dtrace would be very difficult.
    Darren

  • How could I get the Finish10 value from MS Project2010 Server_Reporting database

    I am trying to get the finish10 data from project server using SQL.
    But it seems the finish10 column is not in MSP_EpmAssignment_Userview or MSP_EpmTask_Userview.
    So could you please help me to find it?
    Thanks.

    Hi,
    try to extract information from MSP_EpmTaskBaseline.
    This is Sql query
    SELECT MSP_EpmTask_UserView.TaskName, MSP_EpmTaskBaseline.TaskBaselineFinishDate, MSP_EpmTaskBaseline.TaskBaselineStartDate,
    MSP_EpmTaskBaseline.BaselineNumber
    FROM MSP_EpmTaskBaseline INNER JOIN
    MSP_EpmTask_UserView ON MSP_EpmTaskBaseline.TaskUID = MSP_EpmTask_UserView.TaskUID
    WHERE (MSP_EpmTaskBaseline.BaselineNumber = 10)
    if doesn't work try to rebuild your reporting database.
    Hope this help you.
    Jalal Blali MCTS, MCITP
    Thanks for the help, but I'm trying to extract columns named [finish10], not [baseline1 ~10 finish].

  • How could I get the setup files to install Adobe Media Encoder in a non connected computer?

    HI,
    I'd like to try Adobe Media Encoder in a non connected computer.
    But I don't find the way to get the trial setup files.
    Thanks in adavance for your time.
    Mike

    AME is tied to other apps. There is no separate installer.
    Mylenium

  • How do I get the caption (Description) out of an image's metadata?

    Taking a break from a monstrous project that has had me tied up for days, I have embarked upon what I thought would be a bit of light relief (hah!).
    A colleague asked me for an easy way to get captions into InDesign. So I started scripting there, asking for the "description of the link xmp".
    This was not forthcoming and a search of the InDesign scripting forum yielded the information that in order to get this information it was necessary to open the doc in Photoshop, save it and re-link. This indeed does work, but it is a waste of time in the file-saving stage and also degrades the image, as we have a jpg workflow.
    So I thought that if I was going to have to got to Photoshop anyway, why not have the script go straight there, open the doc, ask for the description and close without saving?
    Photoshop so far has jealously guarded its XMP information.
    In Applescript I ask go "set theData to raw data of XMP metadata of document 1" and there it is in the event log, but in forbidding red type. I try adding "as string" and it appears twice, once in friendly black type, enclosed in quotes, and then the red stuff. However I find myself refused access to the information in the variable.
    AS or JS solutions welcome...

    tell application "Adobe InDesign CS2"
    activate
    tell active document
    set This_Selection to get selection
    try
    if This_Selection ≠ {} then
    if length of This_Selection ≠ 1 then
    display dialog "You have more than 1 item seleted!!!" giving up after 2
    else
    if class of item 1 of This_Selection is image then
    set This_Image to item 1 of This_Selection
    end if
    if class of item 1 of This_Selection is rectangle then
    set This_Image to image 1 of item 1 of This_Selection
    end if
    set Image_Path to file path of item link of (item 1 of This_Image)
    set MDLS_Result to my Get_XMP_Description(Image_Path)
    set {ASTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, " = "}
    set Image_Desc to text item 2 of MDLS_Result
    set AppleScript's text item delimiters to ASTID
    display dialog Image_Desc giving up after 2
    end if
    else
    display dialog "You have 0 items seleted!!!" giving up after 2
    end if
    on error
    display dialog "This rectange contains NO image!!!" giving up after 2
    end try
    end tell
    end tell
    on Get_XMP_Description(File_Path)
    try
    do shell script "/usr/bin/mdls -name kMDItemDescription " & quoted form of POSIX path of File_Path
    return the result
    on error
    return false
    end try
    end Get_XMP_Description

  • How could I get the DVD reader on my desktop computer recognised by MBA

    I have desk top computer -Win 7 x64 connected to a wireless router through ethernet.
    I put in the Mac OS 10.6 in my computer DVD and installed the "DVD or CD sharing.
    My Mac Book Air access the internet through the same wireless router.
    I want to install "Canon EOS Digital Solution Disk V17.1 for Macintosh" [I will call this the Canon disk hereafter for the discussion] wirelessly with remote disk assistance using my desk top computer DVD.
    I put in the Canon Disk in my computer DVD but it is not recognised on my computer DVD or CD sharing window nor on my MBA's under Finder->Devices-> Remote Disk.
    Do I have to connect my MBA to the Ethernet connection on my Wireless Router or
    Do I have to connect my MBA USB to a USB on my desktop computer? Then it will not be wireless though!!
    Can some one direct me to a site where I could do reading and sort it or would mind offering me a suggestion.
    Thanking you.
    Regards
    I put in the

    Well I figured it out… all you do say show commands :-/

Maybe you are looking for