How could I know whether Microsoft patch need reboot or not ?

We use win2003R2 and win2008R2 and so on in the domain environment.
When we apply the Microsoft-provided patch, is there any way to know it need OS reboot in advance ? 

Thank you.
It is not about specific patch.
I would like to know how to identify the microsoft-patches need OS reboot or not , perhaps from information from Microsoft web site.

Similar Messages

  • HT201328 how can I know whether my IME is blocked or not?

    How can I know whether my IME is blocked or not?

    Ask your wireless carrier.
    Where did you acquire this iPhone? Common scam
    is to sell iPhone in working condition so buyer can see
    it works, then seller reports iPhone as stolen/lost for
    insurance claim. Insurance company works with
    cellular provider to blacklist the iPhone and suddenly
    it no longer works.
    Or is your iPhone still locked to a wireless carrier as
    you imply in https://discussions.apple.com/thread/5001327?tstart=0

  • In Generic Extraction how can we know whether it is Delta Enabled or not?

    In Generic Extraction how can we know whether it is Delta Enabled or not?
    Thanks,
    Pramod.

    Hi Pramod,
    In R/3 use RSO2 tcode and enter your DS name and click "Change / Display" In this "Press F7 or Display Filed List" icon near to Generic Delta.In this Screen if Delta Update is Checked means it supports delta method  otherwise it won't support delta method.
    Note:Assign Points if it helps.
    -Arun.M.D

  • How do I know whether my phone is unlocked or not?

    Hello
    I am in Thailand trying to activate my iphone 4S with Thailand SIM card.
    but the phone message says below.
    This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.
    so my question is how do I know whether my phone is unlocked one or not, before I go and try get new SIM card.
    Thank you very much. Your reply will be very much appreciated.

    If your phone will not work with another sim card, then it is likely to be locked to the original carrier.
    The only way to get your phone unlocked is to contact that phone company/carrier that the phone is locked to and hope that they offer unlocking.  Apple cannot unlock a phone for you, only the phone company that your phone is locked to can do that.  Some offer unlocking and some don't, so if the phone company does not offer unlocking, then you are out of luck and you'll either have to buy a new phone or use a sim card of the comapny - take out a contract with the compnay that the phone is locked to.
    Anyway - contact Apple to see whether your phone is locked conclusively and if you talk to them they can tell you what they need.

  • How could I know my current phone is stolen or not?

    Recently I bough iphone 5 from someone but I didn't ask him about the icloud account. Now I so wonder the phone I am using is stolen or not? How could I check? If it is not stolen I want to sign up my icloud account with my phone.
    Here is my IMEI 013336001900193
    Model : MD634LL/A
    Serial Number : F2LJC7TEDTTN
    ICCID : 89855010001056089938
    Trust Store : 2013080500
    Thanks You!!

    The padlock has been replaced by the site identity button, for details on using it see https://support.mozilla.com/kb/Site+Identity+Button

  • How to check whether a patch is applied or not when we apply a patch using patch.sh in oracle apps 11i

    Hi,
    If we apply patch using adpatch,we can know whether the patch is applied or not by checking ad_bugs,even with opatch we can check by using opatch lsinventory...
    But when we apply patch with patch.sh then how can we find out whether a patch is applied or not.
    I have to apply patch 14615390 and  16414360...but how can i know whether those patches are already applied or not. We have jre upgrade so we need to find out whether these patches or already applied or not.
    Thanks in advance,

    These are patches for Forms aren't they?
    I think this has been addressed before
    How to know if a patch has been applied to Forms?
    As the mighty Hussein points out in that post, refer to How to verify if a patch has been installed (Doc ID 105158.1)
    DA

  • How do i know whether my adapter module is working or not?

    Hi
    I have written one Adapter Module and i have given that module in Communcation Channel.
    1.How do i know whether my module is working or not.
    2.How do i atleast my adpater module is calling or not?
    Please help me its very urgent
    Best Regards
    Ravi Shankar B

    Hi Ravi Shankar,
    Since u had written the module, u must have deployed the module on the adapter engine. Now follow this procedure:
    1. Set the breakpoint on the "process" method of ur java code.
    2. Put ur code into Debugging mode.
    3. Place the file again and try running ur scenario
    If the executuin stops at the method "process", then this means that ur module is getting called and there is some error in ur code.
    If the execution is not stopped there, then that means ur module is not visible to XI adapter engine. So either it is not properly deployed or there is some problem while developing it.
    Regards,
    Prateek

  • I have a 2009 13"MacBook pro running on OS X 10.6.8.  How do I know whether this is leopard or mountain? What would you advise that I use as I need to be running OS X 10.7?  All help appreciated.  Thank you.

    I have a 2009 13"MacBook pro running on OS X 10.6.8. 
    How do I know whether this is leopard or mountain?
    What would you advise that I use as I need to be running OS X 10.7? 
    Also can you advise how I upgrade please?
    All help appreciated.  Thank you.

    Thank you for your response Niel.
    I do run Microsoft Office 2011 - will Snow Leopard support this?
    Finally why snow leopard and not mountain lion?

  • Ust purchase an iphone 4s and need to know how could i transfer all files including (contacts, pictures, music, notes and ect.... from sd card or any external card to iphone 4s, please advise thx

    ust purchase an iphone 4s and need to know how could i transfer all files including (contacts, pictures, music, notes and ect.... from sd card or any external card to iphone 4s, please advise thx.

    You need to put all of your info on your computer and then sync it to iphone.

  • How do I know whether my DV video camera is FW400 or 800 ?

    Previously, I tested my Panasonic DV video camera with the old iMac. It cannot capture & doesn't work on USB. But it worked on Firewire. But I cannot remember whether it was FW400 or 800 as it has both. I decided not to buy then bcos I was told a new iMac or possible a MacMini is coming out soon. So I wait.
    But now that it has been refreshed, I was told that it comes only in FW800. How do I know whether my DV video camera is FW400 or 800 ?
    Thanks

    Pretty much anything you need to know about Firewire - including the plug and connector types can be found at http://en.wikipedia.org/wiki/FireWire
    However, if you post the exact model number of your camcorder, chances are we'll be able to tell you for sure what it has!

  • How to know whether file is document file or not and page count

    How can i know whether the file is document file
    Eg: File file = new File("test.text"); 
            File file = new File("test.doc"); 
            File file = new File("test.pdf");   etc should return true
    File file = new File("test.exe"); 
           File file = new File("test.dat");  etc should return false
    and if it is true i should get the page count for example if pdf or doc file is containinf 100 pages
    i should get the value 100 is there any way to acheive this in java pls give some idea or example code
    Regards

    To get the number of pages you would need to write or find an existing Java API that can parse the proprietary formats of each type. And some formats do not really have pages. For instance, the number of pages of a .txt (often opened by Notepad by default) file would depend on your page length which is not generally stored in the file it is set by the tool you use to read the file.

  • How could I know which table the synonym points to now?

    I have two tables with the same structure, TableA and TableB
    I create a synonym which points to TableA. In some senario, the synonym should be switched to point to the other table.
    How could I know which table the synonym points to right now? So that I can switch the synonym to the other table.
    Thanks a lot!!!!!!

    How could I know which table the synonym points to right nowSee all_synonyms view.
    So that I can switch the synonym to the other tableNot without drop synonym. You need to drop and recreate the synonym to point to the new table.
    Nicolas.

  • How do I know whether my computer supports hd?

    How do I know whether my computer (13" MacBook Pro, purchased in 2010) will allow me to play hd movies downloaded from iTunes, or whether I need to download sp versions?

    It will play them. Even my 2008 MB plays them perfectly.

  • How does one know whether or not they use "Java applets"?

    The support doc for the recent Java update (Update 8, for Snow Leopard), entitled "About Java for Mac OS X 10.6 Update 8," advises the following:
    If you do not use Java applets, it is recommended that you disable the Java web plug-in in your web browser.
    How does one know whether or not they use "Java applets"?
    Thanks.
    URL:  http://support.apple.com/kb/HT5243

    K.S. wrote:
    dymar wrote:
    Also, how would I know that a missing applet was causing some feature(s) not to work in a situation where no error mesage was returned?
    Sometimes you have to dig to find out: http://earthnow.usgs.gov/earthnow_app.html
    doesn't tell you directly, but it is mentioned in the FAQ that Java is required. If the content is appropriate, you can always ask here.
    Thanks.  According to that webpage, my "Java is out of date."  When an error message like that is returned, I guess it's clear that "it's a Java problem."  Presumably, one would then just go to java.com and download the applet if he/she wanted to view the webpage.
    I was wondering more about situation when unexplained problems that involved missing Java applets weren't noted in error messages.
    But maybe I'm worrying about something that doesn't really need to be worried about.

  • How could I know the changes

    Respected,
           How could I know if some changes are made in configuration part  and by which user it has been done .Is their any path or transaction path to have a look at the changes   .
    THASNKS AND REGARDS
    AVANISH GULATEE

    Hi ,
    You need to aks the basis team to activate "change log" to view the changes done . Please note that activating the change log requires a lot of pressure on memomry usage and basis team have to take a final call on that. But once done , all the changes can be viewed using what Kahled had replied .
    Regards .

Maybe you are looking for