How could I use the breakpoints of netbean1.4

I want to use the breakpoint of variables
it said "Class Name and Field Name should be specified"
What is the Field Name?
and what I need to enter into the Condition field?
(1)j<20
(2)if(j<20)
which one ?
Thanks......
The breakpoints always can stop......it runs until finished.....

For what purpose?
This is a bit too vague to be able to help. Maybe you could read this...
http://tkyte.blogspot.com/2005/06/how-to-ask-questions.html
Cheers
Ben

Similar Messages

Basically... I had an ipod touch sync'd to my dads i tunes.. i then got an iphone and created my own apple id.. how could i transfer the media from my ipod which was used on a different apple id onto my own account without everything deleting

basically... I had an ipod touch sync'd to my dads i tunes.. i then got an iphone and created my own apple id.. how could i transfer the media from my ipod which was used on a different apple id onto my own account without everything deleting

Syncing an iDevice to a computer does not remove content from the computer.
Syncing an iDevice to a computer that it does not normally sync with will remove the content from that device.
If the media was acquired with a different Apple ID it is in no way linked to your Apple ID.

Have just up dated my iphone 4 to ios5, is the notification centre supposed to show as icon on the main screen, if so how do i get it to show and also i thought you could now use the camera direct form the locked screen?

Have just updated my iphone 4 to ios 5, is the notification centre supposed to appear on your main screen as an icon if so how do i get it to show, and i thought you could now use the camera from the locked sreen i can't seem to this at the moment can anyone help? thank you

Double click home button for camera to show up (and iPod). Notifications seem to show up on lock screen that way, too.

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?

If a tool is acting up, one suggestion is to reset the tool.
Ctrl-click on the clone tool icon in the Options bar and select Reset Tool.

HT201328 I've purchased a used iPhone 3g via similar site like eBay in Hungary.The phone is legal but no invoice was included.How could I unlock the phone?

I've purchased a used iPhone 3g via similar site like eBay in Hungary.The phone is legal but no invoice was included.How could I unlock the phone?

cv.references wrote:
How could I unlock the phone?
ONLY the Carrier it is Locked to can unlock it.
No one here will know who that Carrier is.
The iPhone 3G can only run iOS 4.2.1

I don't know the owner I found an iPhone4 how could I use this???

i don't know the owner how could I use this???

If you found a phone you should take it to the police. You don't have the right to hang onto it. If it's not claimed after a period then you may be able to retain it. But in any case if it is 'Activation Locked' only the original owner can unlock it. There is no way round this, and without being able to contact him (and if you could you should return it) the phone is permanently unusable if locked in this way.

My Apple ID is only limited to Indonesia iTunes Store. I would like to buy some music from iTunes USA Store. How could I use my Indonesia-based credit card in order for me to buy music from another iTunes store? The iTunes Indonesia store is very limited.

My Apple ID is only limited to Indonesia iTunes Store. I would like to buy some music from iTunes USA Store. How could I use my Indonesia-based credit card in order for me to buy music from another iTunes store? The iTunes Indonesia store is very limited as it only sells apps and books products.

No Way... i've got simillar problem with bmonteo... wanna cry

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

How can I use the versionning tool to make a coherent solution to export

how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
I want to know proper steps to Import/export objects.
while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
required ur suggestion
Palash Chatterjee

kelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver? I have been trying with no such luck.
   I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth. But for now, I would just like 2 computers to talk and then eventually talk to our own device.
One is a desktop w/ the Belkin F8T012 USB adapter. It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash. It says it cannot install it because it cannot find the necessary hardware. I thought this USB adapter was on the approved Bluetooth devices list? What else should I try? Another Bluetooth USB adapter?
The other computer is a Dell Latitude 820. It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module. On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter). It came with a serial port interface which we modifed to go through a bluetooth interface. It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port. But we would like to use the Bluetooth VIs in LabVIEW. I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well. Do I just uninstall the driver and then try to have Windows install its own driver? Do you have any other recommendations?
Thanks,
Javi

Hi Javi,
This sounds like an issue with Windows and your specific Bluetooth devices. As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers. Take a look at this link for specific requirements for using Bluetooth with LabVIEW. Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here. Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver. You could check out the Microsoft Knowledgebase for more information. Thanks and have a great day!
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

How can I use the Webkit Webinspector in safari 6 or go back to previous Safari

Since safari 6 Developing is not fun anymore using the webinspector because the search for strings in my scripts is terrible terrible terribe slow on some big scripts it can take 30-40 seconds before it finds any string. Where firebug on firefox or the webkit inspector on googlechrome find the string in some milliseconds. Also the searchbox is default hidden and y need to know the shortcut to display the searchbox for searching in scripts because the searchbox initially shown is not for searching in scripts.
Also other always used interactions needs more clicks like selecting a node in the document, I first have to click the correct small icon on the left then search for the correct resource and then select on the right side of the interface the pointer icon.
Oh I can go back to the old wbinspector I see in the Develop menu ....but that is only a menu item and shows a dummy webinspector that doesn't do anything anymore.
Also restoring to previous saved version of safari is not working anymore. And I cannot see any answer on the post how to restore my old safari version.

Yes, I could move my hand from the mouse to keyboard to use a key combo... I could even use the delete key... but it's not really as effient as using the mouse's scrollwheel. Not that it's really all that bad, since Firefox is a great browser, but am I stuck with it if I want that one solitary additional feature?

I have bought a iphone 4s from uk. but i face problem in using sim on it. this is updated with 6.0.1 version. this phone also hve a chip in sim plate. now how could i use it?

i have bought a iphone 4s from uk. but i face problem in using sim on it. this is updated with 6.0.1 version. this phone also have a chip in sim plate. now how could i use it?

Where did you purchase in UK and is the iPhone carrier locked ??

How can I use the mousewheel to scroll forward and back in Safari?

I really like Safari. As I see it, the only short coming is a feature that is present in Internet Explorer and Firefox. In both of these applications I can hold down a modifier key (CTRL) and roll the mouse wheel to go back 1 page in history. I would be really glad to know how to do this in Safari, as just about everything else I can do in IE and Firefox is in Safari. This roll back feature is one of the things I use more often than almost anything else.
Question: How can I use the mousewheel to move backward in the browser history?

Yes, I could move my hand from the mouse to keyboard to use a key combo... I could even use the delete key... but it's not really as effient as using the mouse's scrollwheel. Not that it's really all that bad, since Firefox is a great browser, but am I stuck with it if I want that one solitary additional feature?

How can i use the subitem in SAP PR Item ( like 1,1.1,1.2,1.3,2,2.1,2.2,2.3

Dear Experts,
how can I use the subitem in SAP purchase requisition Item ( like 1,1.1,1.2,1.3,2,2.1,2.2,2.3,3,3.1,3.2,3.3,4,4.1,4.2,4.3,5,5.1...)?
Could you please tell me how can i configure Item Number Interval in SAP purchase requisition ?
Best Regards,
Merry

The purchase requisition item number is a numeric, it can not contain anything except digits.

How can I use the defaults command to edit a sub key in an array of plist?

For example, how could I edit the Name key in the array?
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Test</key>
<array>
<dict>
<key>IPAddress</key>
<string>xxxx</string>
<key>Name</key>
<string>yyyy</string>
</dict>
</array>
</dict>
</plist>

I realize you are asking specifically about 'defaults', but as they concede in 'man defaults', it may not be the best tool for editing properties in "complex" structures, such as those buried in dicts within arrays, etc.
As an alternative, it looks like in 10.5, '/usr/libexec/PlistBuddy' is now a part of the standard install - 'PlistBuddy' may be more useful for this sort of task.
For example:<pre>
/usr/libexec/PlistBuddy -c "set Test:0:Name zzzz" /path/to/file.plist</pre>

How could I use the breakpoints of netbean1.4

Similar Messages

Maybe you are looking for