How could we have the Sonos wireless speakers work with Aruba System?

Answer- Generally we may notice that the Sonos wireless devices are not able to pass discovers / requests / replies through Aruba controller . One of the main reason could be the DLNA limitation on the controller when Airgroup is enabled. In such situations, if we disable Airgroup we can notice these devices start working fine. But if we want to use Sonos wireless speakers with AirGroup enabled on their Aruba wireless networks, we may have to enable some DLNA Airgroup services.
If we check through the blocked AirGroup services multiple times (show airgroup blocked-service-id dlna). We can find the following service IDs to the DLNA Media airgroup service in order to make this system work as desired:
airgroupservice "DLNA Media"
id "urn:schemas-upnp-org:service:GroupRenderingControl:1"
id "urn:schemas-sonos-com:service:Queue:1"
id "urn:schemas-upnp-org:service:AVTransport:1"
id "urn:schemas-upnp-org:service:RenderingControl:1"
id "urn:schemas-tencent-com:service:QPlay:1"
id "urn:schemas-upnp-org:service:GroupManagement:1"
id "urn:schemas-upnp-org:service:ZoneGroupTopology:1"
id "urn:schemas-upnp-org:service:DeviceProperties:1"
id "urn:schemas-upnp-org:service:MusicServices:1"
id "urn:schemas-upnp-org:service:AlarmClock:1"
id "urn:schemas-upnp-org:device:ZonePlayer:1"
id "urn:schemas-upnp-org:service:SystemProperties:1"
id "urn:schemas-upnp-org:service:ContentDirectory:1"
id "urn:schemas-upnp-org:service:ConnectionManager:1"
We can add these under an airgroup service as "Sonos Services" or any other name in order to differentiate this traffic from other DLNA traffic.

vikrams-Is this method supported for IAP-103 running 6.4.0.3-4.1.0.2_45704? I create the Service however when I try to add the service ID to my Sonos defined service, it is asking for the service ID in the format of: _<alpha numeric string>._tcp or ._udp? Thanks!Leandro

Similar Messages

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

Take a look at HeadRoom (headphone.com). It's a fabulous resource for all types of headphones, with great guides and useful reviews.
http://www.headphone.com/

My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

about message http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?
Thanks!

You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
eMac Mac OS X (10.3.8)

How do I have the Artists photos line up with there songs. Music

How do I have the artists photos line upwiththere songs. For some reason some of my photos have moved to the wrong song. In my Music app.

Hi!
You can sync your new computer to your previous Sync account. Follow the instructions provided here: https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync#w_add-another-computer
If you don't have the Sync Key with you, you can retrieve it from your phone using the following Android extension: https://addons.mozilla.org/en-US/mobile/addon/aboutsynckey/

How can we get the web cam to work with sykpe or any out going calls

can get the web cam to work with skype

Hey there,
What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Only the front 2 speakers working with a 5.1 set up when playing mus

I have a xtreme gamer card, with the 2.5.0006 driver installed which worked fine up until recently. Recently only the front 2 speakers play when playing music. All 5 produce sound when tested from either the creative console or windows sound manager. So all 5 are correctly connected, yet when music is played only the front lef and front right speakers are used.
I'm using vista 32-bit.
If there is already a thread on this particular problem (all 5 work on a test and it's a 5. not 6. system) then I apologise but would still like a link. Thank you for your advice.

You should email Creative support and report the problem.
CMSS-3D has problems with the latest beta on Vista x64, but you're running 32-bit Vista on their release drivers, which is supposed to work fine.
If you get a message saying 'would you like to disable audio enhancements?' and you click 'yes', you are disabling CMSS-3D from working, which is the function that transforms normal stereo music into multi-speaker music.
You can try re-enabling it manually:
Open Sound Control Panel.
Select your output device (e.g., Speakers.)
Hit the Properties button at the bottom of the Sound Control Panel.
Select the Sound Blaster tab.
Uncheck the 'Disable Sound Blaster enhancements.'
Hit OK, and OK.
Go into the Creative Audio console, make sure you're in Entertainment mode, and go into the CMSS-3D panel, set your settings here as you like it.
Pray.
Test.
That may not work, especially if the driver / operating system was reporting problems with CMSS-3D in the first place; you may end up getting garbled sound or an error message again.
Send your details to Creative so they can try to work on it, because it sounds like driver issues to me.

How do I get the new iPod to work with iTunes

I recently purchased a new iPod--I think it's the "Shuffle," whichever one retails for $150. When I plugged it into my iMac, it said I needed to install iTunes 10 to run it. When I checked for updates, it said that iTunes 9.xyz (whatever came after the 9) was the latest version.
How do I get this new iPod to work. As you can tell, I am not much of a gadget junkie, and I'm a bit of a technology incompetent, which is why I purchased the Mac to begin with. I have an iMac, have no idea what operating system I am using--whatever came with it when I purchased it in November, 2008.
TIA!

Okay, I just looked and I do have 10.411. How do I upgrade to get the new iPod to work, and how much does the new operating system cost?

How do I get the application boom to work with netflix?

Netflix is too quiet so I have downloaded the application boom under the impression this would increase the volume of my mac book pro retina. However it's asking me to import files rather. Is it possible to increase the volume while using a browser?

How do you mean "work with" your PC? (I'm assuming you mean "PC" as shorthand for "Windows PC".)
Do you want to attach the PC with an existing AirPort Express network? In that case, no special action is needed just because the network base station is an AirPort express.
Do you want to use the PC to configure a new AirPort Express (or reconfigure an old one)? In that case, you need to download the Windows version of AirPort Utility.
For Windows 7: http://support.apple.com/kb/DL1547
For Windows XP SP3 or later: http://support.apple.com/kb/dl1391
Do you want to do something else? If so, please explain what.

How do you set the remote only to work with the MacBook and not the Hi-Fi.

I have a Hi-Fi Apple stereo hooked up to my Macbook but when I use the Apple remote, it controls both things.
So if I am scrolling through my music in Frontrow then the volume on the Hi-Fi stereo is turning down or up depending on which way I am scrolling.
My question is:
How do I make the remote work with only my MacBook?

Pair the remote with your macbook by isolating it point the remote at it while holding down the menu and next buttons. You see like a chain appear and that will mean the remote is paired. Now only the macbook will only respond to the macbooks remote. Do the same with the Hi-Fi remote and now the hi-fi will only work with the hi-fi remote.

How do you get the iPod Touch to work with NIKE PLUS

I purchased an iPod Touch and according to target employee it was the latest generation. The one that worked with Nike Plus. However for two days now there is no icon no nothing that will start the lnink process. I plugged the connector and it gives me a message saying " This accessory is not supported by this ipod"
I realize the new ipod have a sensor built in.
Noppie

I would double check on what generation you have. Do you have external, physical buttons to be used for volume control? If not, you have the first generation touch which will not work with Nike+. If this is the case, I'd recommend taking the iPod back to Target and requesting an exchange.
CG

How do I set the number pad to work with spaces?

It has worked with other OSs but with Mavericks 10.9.5 (and from what I here, Yosemite) you can not use the number pad to change spaces. I know I can use the numbers across the top or the arrows, I just find it quicker and ergonomic to use the number pad. As many spaces I use this is very inconvenient to be reaching across the keyboard. Is there a way to fix this. I went to the preferences but could not find anything there to change. Maybe Apple could fix this in there next update.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

How do I get the coupon printer to work with snow leapord

I used to be able to print coupons with my computer, but ever since I updated to snow leapord, I can't print coupons even when I download the coupon manager. Does anyone know how to get this to work again?

How do you mean "work with" your PC? (I'm assuming you mean "PC" as shorthand for "Windows PC".)
Do you want to attach the PC with an existing AirPort Express network? In that case, no special action is needed just because the network base station is an AirPort express.
Do you want to use the PC to configure a new AirPort Express (or reconfigure an old one)? In that case, you need to download the Windows version of AirPort Utility.
For Windows 7: http://support.apple.com/kb/DL1547
For Windows XP SP3 or later: http://support.apple.com/kb/dl1391
Do you want to do something else? If so, please explain what.

How can I get the Firefox browser to work with my high speed internet?

After switching from dial-up to high speed internet, I can no longer open the Firefox browser (which I was using) even after downloading the latest version. It is set for my default, but I can only use IE to browse. What else do I need to do to make it work?

You didn't tell me it was a user name password issue.
Open Keychain Access. (Applications/Utilities)
Select Passwords on the left.
Delete the Delta keychain.
Now from your Safari menu bar click Safari / Preferences then select the Autofill tab. Make sure: User names and passwords is selected.
Navigate to the Delta site. Login with your user name and password. You should be prompted to save that info to a new keychain.

How could we have the Sonos wireless speakers work with Aruba System?

Similar Messages

Maybe you are looking for