How create a bin in lean warehouse

Hi
how to create a bin in lean warehouse, here there is no storage section only picking area is available, how to create a bin. it is not allowing me to create bin with out giving section in ls01n. how to create it.
with regards
Narendra kumar

Hi
You must create atleast one section for each storage type. With out section you will not be able to create bins. Pl define one for the Storage type in customising.
Regards
Rajesh

Similar Messages

Lean warehouse Management

Hi!
I want to use lean warehouse management for creating TO. kinldly help me out to know the settings of lean warehouse management with fixed storage bin and also for
2. Wave pick settings
With Regards
Bhikshapathi

dear vonnala
Lean Warehouse Management: Configuration Guide
Purpose
The purpose of this document is to describe the general configuration steps required to manually set up the configuration within the system landscape that has already been installed using the corresponding installation or configuration guides for installation.
The Configuration Guide describes how to set up the configuration of a Building Block manually, without the support of automated configuration tools.
Preparation
1.1 Prerequisites
The following building blocks form the basis for all my SAP All-in-One Automotive, High Tech and Industrial Machinery and Components solutions. You only have to install these building blocks once.
Building Blocks Comment
Baseline Building Blocks (Layer 0)
J00 - Essential Information
J02 - Organizational Structure
J03 - Financial Accounting
J08 - Controlling
J05 - Materials Management
J04 - Sales and Distribution
Baseline Building Blocks (Layer 1)
J06 - Production Planning and Controlling
J07 Quality Management
J18 - Product Cost Controlling
J19 Batch Management
J20 - Cost Object Controlling Make-to-Order
J21 - Cost Object Controlling Make-to-Stock
J17 - Profitability Analysis
J14 - Human Capital Management
J09 - Travel Management
Industry generic Building Blocks
E04 - Supplement Settings
E05 - Master Data HT / IM&C
Configuration
1.2 Lean WM Basic Settings
1.2.1 Defining Defining ControlControl Parameters and Number Ranges for the Warehouse Number Parameters for the Warehouse Number
Use
A warehouse number is an organizational unit in Logistics, which organizes the company from the perspective of Warehouse Management.
In the Warehouse Management System, you can define a variety of control parameters at warehouse number level.
Procedure
1. Access the activity using one of the following navigation options:
 Picking  Shipping  Logistic Execution IMG Menu IMG   Define control parameters and number ranges for the warehouse numberLean WM Define control parameters and number ranges for warehouse no.(double click)
Transaction Code SM30
2. Find the Field Name and input the relative value into the field.
Table V_T3002
Field name Value R/O/C Description
Whse number L01 R
Warehouse no. description Lean WM BP01 R
Weight unit KG R
Volume unit
Default UoM K R
Time unit/performance data
Lean WM active X R
Link to subsystem active
Performance data
Transfer order 01 R
Group number 01 R
1.2.2 Defining Storage Type
Use
A warehouse number is subdivided into a variety of storage types. A storage type is defined by its physical or organizational features (for example, high rack storage area, bulk storage, and goods receipt areas).
A storage type has a short description rather than an address.
Before you can implement Lean WM, you must configure the following settings:
1. Assign a (newly defined) storage location to a warehouse number.(This step is defined by step 3.12 Control Plant / Storage Location / Warehouse Number Assignment
2. You should set up at least three storage types:
a storage type (that will be used as a source storage type) with one or several fixed storage bins
a goods issue area (as destination storage type) for deliveries
an interim storage area for differences
Procedure
1. Access the activity using one of the following navigation options:
IMG Define Storage Lean WM  Picking  Shipping  Logistic Execution Menu IMG type
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T3012
Data record 1:
Field name Value Sub-screen
Whse number L01
Warehouse no. description Lean WM BP01
Storage type 001
Storage type name Fixed bin storage
Stock plcmt requires confirmation for putaway control
Unit of measure type srch
Stock rmvl requires confirmation for picking control
Unit of measure type srch
Data record 2:
Field name Value Sub-screen
Whse number L01
Warehouse no. description Lean WM BP01
Storage type 916
Storage type name Shipping area deliveries
Stock plcmt requires confirmation for putaway control
Unit of measure type srch
Stock rmvl requires confirmation for picking control
Unit of measure type srch
Data record 3:
Field name Value Sub-screen
Whse number L01
Warehouse no. description Lean WM BP01
Storage type 999
Storage type name Differences
Stock plcmt requires confirmation for putaway control
Unit of measure type srch
Stock rmvl requires confirmation for picking control
Unit of measure type srch
Data record 4:
Field name Value Sub-screen
Whse number L01
Warehouse no. description Lean WM BP01
Storage type 902
Storage type name IN-ZONE
Stock plcmt requires confirmation for putaway control
Unit of measure type srch
Stock rmvl requires confirmation for picking control
Unit of measure type srch
1.2.3 Defining Doors
Use
In a WM-managed warehouse, you can define dock doors (also known as doors or gates). A door is a location where the goods either arrive in the warehouse or leave it.
You can assign different functions to a dock door, for example:
Goods receipt
Goods issue
Other transactions such as cross-docking and flow-through
Procedure
1. Access the activity using one of the following navigation options:
 Picking  Shipping  Logistic Execution IMG Menu IMG Define DoorsLean WM
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T30B
Field name Value R/O/C Description
Whse no. L01 R Warehouse number
Door A01 R Door for warehouse number
Text for door Door A01 R Text for door
Staging area
Matl stag. area txt
GI indic. X R Goods issue indicator
GR ind X R Goods receipt indicator
CD ind Cross-docking indicator
FT ind Flow-through indicator
1.2.4 Defining Material Staging Areas
Use
A staging area is an interim storage area for goods that have been received from goods receipt and afterwards need to be transferred into the warehouse.
It is also an interim storage area for goods that were picked in a warehouse and are to be loaded for goods issue through loading ramps or doors.
You can assign different functions to a staging area:
Goods issue
Goods receipt
Procedure
1. Access the activity using one of the following navigation options:
 Lean WM  Picking  Shipping  Logistic Execution IMG Menu IMG Define Material Staging Area
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T30C
Field name Value R/O/C Description
Whse no. L01 R
Staging area A01-01 R
Matl stag. area txt Zone 1 R
Door A01 R Door for warehouse number
Text for door Door A01 R
GI ind X R Goods issue indicator
GR ind X R Goods receipt indicator
CD ind Cross-docking indicator
FT ind Flow-through indicator
HU ind Handling unit indicator
1.2.5 Defining Picking Area
Use
A picking area is an object within a storage type that groups together storage bins for purposes of stock removal.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG Define Picking Lean WM  Picking  Shipping Logistic Execution Area
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T30A2
Data record 1:
Field name Value R/O/C Description
WhN L01 R Warehouse number
STy (storage type) 001 R
PAr (Picking area) 001 R
Picking area name Picking area 1 R
Data record 2:
Field name Value R/O/C Description
WhN L01 R Warehouse number
STy (storage type) 001 R
PAr (Picking area) 002 R
Picking area name Picking area 2 R
1.2.6 Defining Transfer Type
Use
In Lean WM, the transfer type "A" (stock removal) is required for movement type control.
Procedure
1. Access the activity using one of the following navigation options:
 Picking  Shipping  Logistic Execution IMG Menu IMG   Define Transfer TypeLean WM
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T333A2
Field name Value R/O/C Description
WhN L01 R Warehouse number
Transfer type A R
Text f. shipment type Pick R
1.2.7 Defining Movement Types
Use
The SAP R/3 System uses movement type to process movements in Inventory Management (for example, goods receipt for a purchase order or goods issue to a cost center). When the system recognizes a movement as being relevant for Warehouse Management, it assigns this movement to a WM movement type by means of a table.
The movement type for the Warehouse Management System provides the information required for stock removals or picking:
Interim storage bin
Fixed bin coordinate
Control indicator for processing, confirming, and printing transfer orders
Confirmation info
Procedure
1. Access the activity using one of the following navigation options:
 Lean WM  Picking  Shipping  Logistic Execution IMG Menu IMG Define Movement Type
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T3332
Data record 1:
Field name Value R/O/C Description
Warehouse number L01 R
Warehouse no. description Lean WM R
Movement type 255 R
Movement type description Goods Issue general R
Src 001 R
Src Stor. Bin
Dest 916 R
Dest Stor. Bin
Transfer type A R
Text for transfer type TRATX Pick R
TO creation screen 2 R
Scr. TO confirmation 2 R
Manual TO creation not allowed
Transfer priority
Print code
TO item can be confirmed immed.
Propose confirmation
Data record 2:
Field name Value R/O/C Description
Warehouse number L01 R
Warehouse no. description Lean WM R
Movement type 601 R
Movement type description Picking by delivery note R
Src 001 R
Src Stor. bin
Dest 916 R
Dest Stor. bin
Transfer type A R
Text for transfer type TRATX Pick R
TO creation screen 2 R
Scr. TO confirmation 2 R
Manual TO creation not allowed X R
Transfer priority
Print code 02 R
TO item can be confirmed immed. X R
Propose confirmation
1.2.8 Defining Difference Indicator
Use
Using the difference indicator, you can classify your differences. This indicator is used in Lean WM for evaluation purposes only.
Procedure
1. Access the activity using one of the following navigation options:
LogisticIMG Menu IMG   Define Difference Lean WM  Picking  Shipping Execution Indicator
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T3362
Field name Value R/O/C Description
WhN L01 R Warehouse number
DiffInd (difference indicator) X R
Description of difference indicator Stock difference R
Stor.ty.differences 999 R
Diff.bin
TO X R
Source bin
1.2.9 Control Plant / Storage Location / Warehouse Number Assignment
1.2.9.1 Assigning Warehouse No. to Plant-Storage Locations
Use
By doing so, system can recognize which storage locations in Materials Management are controlled by the Warehouse Management system (LE-WM); you must assign the plants and the storage location to the warehouse number.
Procedure
1. Access the activity using one of the following navigation options:
Assignment Enterprise Structure IMG Menu IMG Assign warehouse No. To plant/storageLogistic Execution Location
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T320
Field name Value R/O/C Description
Plant BP01 R
SLoc 0005 R
WhN L01 R
1.2.9.2 Control Plant / Storage Location / Warehouse Number Assignment
Use
You can control for each combination of plant, storage location, and warehouse number whether Lean WM or standard management of bin inventory is to be selected.
If you are using Lean WM, you can also specify a picking storage type that is used for creating transfer orders.
Procedure
1. Access the activity using one of the following navigation options:
 Logistic Execution IMG Menu IMG   Control Plant / Storage Location / Warehouse Lean WM  Picking Shipping Number Assignment
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_T3202
Field name Value R/O/C Description
Plnt BP01 R
Stor. loc. 0005 R
WhNo (Whse number) L01 R
Degree of activation Warehouse Mgmt 1 R
Stor.type for picking in Lean WM 001 R
1.2.10
1.2.11 Assigning Picking Location
Use
Assign the picking locations to the combinations of shipping point and storage condition for every plant.
Procedure
1. Access the activity using one of the following navigation options:
 Shipping  Logistic Execution IMG Menu IMG   Assign Picking Location Determine Picking Location Picking
Transaction Code SM30
2. Find the Field Name and input the relative value into the field
Table V_TVKOL
Field name Value Description
ShPt BP01 Plant
Plnt BP01 Shipping point/receiving pt
SC K1 Storage conditions
SLoc 0005 Storage location
1.3 Print Control for Warehouse
Use
Print control defines the following:
Which slips are to be printed for the movements (that is, for the transfer orders) within the Warehouse Management System
How these slips are to be printed (that is, which forms are to be used, how many copies are to be printed)
On which printer a slip is to be printed automatically
And print control manages the print operations of the warehouse. This flexibility involves a certain degree of complexity with regard to the parameterization.
Procedure
1. Access the activity using one of the following navigation options:
IMG Menu IMG   Define Print Lean WM  Picking  Shipping Logistic Execution control
Transaction Code OMLV
2. Choose the following button and check the contents
(Here only the contents of the warehouse no. L01 are listed):
2.1 Spool code
Data Record 1
Field name Value R/O/C Description
WhN L01 R Warehouse number
Spool 01 R Spool request name
Copies 1 R Number of copies
Title LVS1 R Spool control data
Print_immed. X R Print immediately
Delete_after_print X R Release after output
NewSplReq__ New spool request
Data Record 2
Field name Value R/O/C Description
WhN L01 R Warehouse number
Spool 02 R Spool request name
Copies 1 R Number of copies
Title LVS2 R Spool control data
Print_immed. Print immediately
Delete_after_print X R Release after output
NewSplReq__ New spool request
2.2 sort profile/collective process
Field name Rec1 Rec2 Rec3 Rec4 Rec5 Rec6 Rec7 Rec8 Rec9
WhNo_(Whse_number) L01 L01 L01 L01 L01 L01 L01 L01 L01
Sort_profile 1 2 3 4 5 6 7 8 9
1st_sort_criterion SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI SPOOI
Sort_descending_order (1st_sort_criter.)
Control_break_1st_sort_criterion
2nd_sort_criterion LDESI LDESI LDESI LDESI LDESI LDESI LDESI LDESI LDESI
Sortdescending_order (2nd_sort_crit.)
Control_break_2nd_sort_criterion X
3rd_sort_criterion REFNR REFNR REFNR REFNR FORMI FORMI FORMI FORMI REFNR
Sortdescending_order (3rd_sort_crit.)
Control_break_3rd_sort_criterion X X X X
4th_sort_criterion FORMI FORMI FORMI FORMI LGNUM LGNUM LGNUM LGNUM FORMI
Sortdescending_order (4th_sort_crit.)
Control_break_4th_sort_criterion X X X X
5th_sort_criterion LGNUM LGNUM LGNUM LGNUM VLTYP VLTYP VLTYP VLTYP LGNUM
Sortdescending_order (5th_sort_crit.)
Control_break_5th_sort_criterion
6th_sort_criterion VLTYP NLTYP VLTYP TANUM VLPLA NLPLA WERKS TAPOS NLTYP
Sortdescending_order (6th_sort_crit.)
Control_break_6th_sort_criterion X X X X
7th_sort_criterion VLPLA NLPLA WERKS TAPOS
TANUM TANUM LGORT KOBER
Sortdescending_order_ (7th_sort_crit.)
Control_break_7th_sort_criterion X
8th_sort_criterion TANUM TANUM LGORT TAPOS TAPOS MATNR VLPLA
Sortdescending_order (8th_sort_crit.)
Control_break_8th_sort_criterion
9th_sort_criterion TAPOS TAPOS MATNR CHARG TANUM
Sortdescending_order (9th_sort_crit.)
Control_break_9th_sort_criterion
10th_sort_criterion CHARG BESTQ
TAPOS
Sortdescending_order_ (10th_sort_crit.)
Control_break_10th_sort_criterion
11th_sort_criterion BESTQ SOBKZ
Sortdescending_order_ (11th_sort_crit.)
Control_break_11th_sort_criterion
12th_sort_criterion SOBKZ LSONR
Sortdescending_order_ (12th_sort_crit.)
Control_break_12th_sort_criterion
13th_sort_criterion LSONR VLTYP
Sortdescending_order_ (13th_sort_crit.)
Control_break_13th_sort_criterion
14th_sort_criterion VLTYP
Sortdescending_order_ (14th_sort_crit.)
Control_break_14th_sort_criterion
15th_sort_criterion
Sortdescending_order_ (15th_sort_crit.)
Control_break_15th_sort_criterion
2.3 print code
Field name Rec1 Rec2 Rec3 Rec4 Rec5 Rec6 Rec7
WNo___(Warehouse_number) L01 L01 L01 L01 L01 L01 L01
PrCd__(Print_code) 01 02 03 11 12 21 22
Print_code_description
Find_shipping_data____
Determine_production_data_
Form_ LVSTAEINZEL LVSTALISTE LVSTOSOLO LVSTAEINZEL LVSTALISTE LVSKOMMIL1
LVSKOMMIL2
PTm_(Time_of_printing)________
Sort_profile 1 1 1 4 1 1
Combined_print x x x x
Spool_data 02 02 01 02 02 02 02
Label_form LVSLABELS
Label_spool_code 01
Quantity_of_labels_(Indicator) 2
2.4 assign printer to storage type (LP01 to 001 only)
Field name Rec1 Rec2 Rec3
WhNo_(Whse_number) L01 L01 L01
STy__(storage_type) 001 916 999
Storage_type_description Fixed bin storage Shipping area deliveries Differences
Printer
2.5 assign print code to movement type
Field name Rec1 Rec2 Rec3
WhNo_(Whse_number) L01 L01 L01
MvT__(WM_movement_type) 101 255 601
Movement_type_description Goods receipt for pur.or.
Picking by delivery note
PrCd__(Print_code) 01 02
2.6 assign print report to warehouse No.
Field name Rec1
WhNo_(Whse_number) L01
Warehouse_number_descrip. Lean WM Plant BP01
Print_report RLVSDR40
2.7 print control multi-processing
Field name Rec1
WhN L01
Ref.ty. L
Status 2
Print_prog. RLKOMM40
PrCd 21
Printer LP01
1.4 Manual Activity
1.4.1 Maintaining Number Range Intervals for Transfer Order
Use
Maintain number range intervals for transfer order
Procedure
In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:
Access the activity using one of the following navigation options:
 Logistic Execution IMG Menu IMG   Define control parameters and number ranges for Lean WM  Picking Shipping   Maintain number range intervals for transfer ordersthe warehouse number (double click)
Transaction Code LN02
Check if the internal number range 01 (0000000001-1000000000) has been defined
Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.
Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.
1.4.2 Maintaining Number Range Intervals for Reference Numbers
Use
Reference number range has the following meanings:
This number identifies a number range to be used for the assignment of sequential numbers for WM reference numbers. Reference numbers are used to create or print a group of transfer orders at one time.
A sequential number generated by the system for the purpose of multiple processing of transfer requirements and delivery notes.
The reference number can also be used to print the resulting transfer orders at a later time.
Procedure
In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:
Access the activity using one of the following navigation options:
IMG Menu IMG Define control parameters Lean WM  Picking  Shipping Logistic Execution   Maintain number range intervals forand number ranges for the warehouse number Reference Numbers( double click)
Transaction Code LN06
Check if the internal number range 01 (5000000000 - 5999999999) has been defined
Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.
Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.
rewards if it helps
siva

In warehouse management how to post stock in the warehouse by using physica

hi
in warehouse management how to post stock in the warehouse by using physical inventory method
can anyone tell me the process in detail
thanksin advance.

HI ,
In Ware house management you can block the stock for Physical Inventory purpose. You cannot post the stock to the warehouse using Physical Invenory.
If there is a count going on so the concerned Warehouse bin is to be blocked during Inventory so that no further goods movement is possible during that period.
Once the Physical Inventory ids done the block can be released so that the movement can again happen.
The Inventory mangement initiates the transfer requirement. This transfer requirement is used for creating the transfer orders. The transfer order confirmation is done then which actually places the stock in the concerned bin mentioned in the order.
The stock in WM can be checked in LX24/ LX26 which is same as theat of MMBE of MM.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

How to do BIN to BIN transfers in WM

Hi Guys
How to do BIN to BIN transfers in WM
And also warehouse to ware house transfers

Please use LT10 ,in this you mention warehouse , storage type & bin from which material is to be transfered& then execute. This will take you to stock transfer overview screen where you can select the line of storage bin & press stock transfer foreground button. After pressing it will take you to screen "Specify destination data "where you can select required storage type & bin. After selecting these details you can press copy & then system creats TO for you.
If you select display log it will display TO
OR
Use t-code LT01 also, use the movement type 999 for internal transfer Bin to Bin with the same storage type, next step input the related information, for example, which parts from which bin to the destination bin? How many quantity? Then click the button of "Execute", that's okay!

Process flow of lean warehouse management

hello experts
can any body explain the whole process of material receiving, material outgoing , inventory management in lean warehouse management .
i have already configured lean ware house management.
i suppose material receiving will be same as in IM system.
means through MIGO at any st loc. there will not be any transfer order etc.
similarly for outgoing and inventory management
please explain.
thanks and regard
ashwani tripathi

Hello Experts,
i have configured lean ware house .
when i am creating Transfer order (inbound) with ref. to MIGO Doc. no. it is showing Error : You have not selected any data for the material Document 5000.....
please help .
regard
ashwani tripathi

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?
How exactly it picks up a specific data value during Hourly aggregations and Daily aggregations?As in How the value is chosen. Does it say averages out or simply picks value at the start of the hour/day or end of the hour/day ??

I'll try one more time. :)
Views in the operations console are derived from data in the operational database. This is always raw data, and typically does not go back more than 7 days.
Reports get data from the data warehouse. Unless you create a custom report that uses raw data, you will never see raw data in a report - Microsoft and probably all 3rd party vendors do not develop reports that fetch raw data.
Reports use aggregated data - hourly and daily. The data is aggregated by min, max, and avg sample for that particular aggregation. If it's hourly data, then you will see the min, max, and avg for that entire hour. Same goes for daily - you will see the
min, max, and avg data sample for that entire day.
And to try clarifying even more, the values you see plotted on the report are avg samples. If you drill into the performance detail report, then you can see the min, max, and avg samples, as well as standard deviation (which is calculated based on these
three values).
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Lean warehouse - List of Business Process

Dear Experts,
Can you please tell us what are the List of Business Processes applicable with respect to Lean warehouse management.
Thanks and Regards,
Selvakumar. M

Hi,
Movement of stock or stock change takes place at storage location level in Lean warehouse. in lean ware house thestock place ment and removal takes place only till storage location level wheres as in fully blown ware house the stock place ment and removal takes place till bin level. Hence lean warehouse is like the inventory management. You can have all the scenarios as in inventory management. Thanking you.

Storage Bin Scenario in Warehouse

Hi,
How could be the scenario in warehouse for Bin ?
In What order it will contain Handling Unit, Quant, Materials.
Thanks ...

Hi,
hope this is what you have asked for.
Physical Warehouse Structure:
After Goods Receipt goods reach GR area-->Say High Rack Storage/Bulk Storage/Fix Bin Area, then after GI moved to GI area.
to elaborate more after GR--> in GR area we have storage type say A, and respective Storage Types for High Rack Storage/Bulk Storage/Fix Bin Area can be D, E and F respectively.
Bin Types: High bins, Lower Bins depending upon Fast Moving Items in the storage section.
WM in system hierarchy :-
WH Number>Storage Type>Storage Section/Picking area>Storage Bin>Quant
Quants are defined by --
- Material / Batch
- Stock Category
- Special Stock
- Plant / Storage Location
- Storage Unit Number
regards,
Prashant Rathore.

Automatic Batch Determination in Lean Warehouse

Hi
We have a lean warehouse management in the plant. The requirement is batch should come automatically at the time of creating TO. Can this be possible? what is the functional and technical configuration required for this?
Awaiting your response
Thanks and Regards
KVK

Hi Kumarank
I am not sure whether the following links would be of helpful to you.
http://help.sap.com/saphelp_47x200/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/25/283c9a4f7811d18a150000e816ae6e/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/25/283ab94f7811d18a150000e816ae6e/frameset.htm
Thanks
G. Lakshmipathi

Difference between 1.Centralised 2.Decentralised 3.Lean Warehouse

Difference between
1.Centralised 2.Decentralised 3.Lean Warehouse

Hi,
Centralised warehouse: manage goods movements and stock changes in the warehouse at storage bin level.
Decentralised warehouse: standalone system, is used for the storage of goods and for the distribution of goods, represents the link between internal and external logistics.
3rd party ERP also can be integrated with Decentralised warehouse.
Lean warehouse - Inventory can be managed at storage location level, can not be managed at bin level using the quants.
Solely for goods receipts and goods issues.
Implement Lean WM in a fixed bin warehouse;
Random storage is not possible.
Lean wm does not update stocks at bin level
Adv: reprint transfer orders
split transfer orders
Disadv: can not process stock differences
Thanks,
Ganga raju.

In wms difference between lean warehouse and central warehous

hi
this is very important that could any body tell me
what is lean warehouse
what is centeral warehouse
what is the differe

Hi
Lean ware house can also said as clean warehouse
here the basic difference between central WH is the material is always stored in or inventory is maintained in FIXED storage bins
Always the material is kept in FIXED storage bins
That is Picking area is fixed
This will have the organizational structures mainly Warehouse no,storage type,Picking area(fixed storage bins),doors and staging area
But a Central warehouse has random storage bins
Apart from all the organizational structures mentioned in lean it will also have storage sections ,reserve storage bins,strategies for picking like LIFO and FIFO,replinishment and inventory at storage bin level
WH is big concept in SAP and there is a separate forum SCM LOGISTICS EXECUTION here
Pls post it there
You will get more inputs
Regards
Raja

In RSA Authentication Manager 7.1, how create multiple security domains

Hi,
RSA Authentication Manager 7.1 in configured with LDAP(Sun java system directory server); how create multiple security domains 7.1, is this security domains is releted to LDAP?
thanks

I think what you need to do is create an identity sequence with RSA as the selection in
Authentication and Attribute Retrieval Search List and AD in Additional Attribute Retrieval Search List. Then select this sequence as the result in the identity policy for the service

How create animation in oracle forms 6i

any one can guide me how create animation in oracle forms 6i

hello to every one..
my dear friend developer is a busniness application tool.you can create
animaiton on flash and other animaiton softwares and then you can call on froms.
best regard
amk

How create header with user id time date to VC-report's output as display ?

How create header with user id time date to VC-report's output as display ?
This info should come from the VC - not all the way from R3-side via FunctionModule/BABI. So only userid, date, time to output as normal text (which is not editable of course). Thanks =)

Hi ann-mari
Go through following link may it help u
Form Item disabled based on portal role
/people/community.user/blog/2007/01/17/visual-composer-explorations-using-portal-roles-to-influence-ui-element-behavior
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/usingrolestoinfluenceapplication&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/passingvaluesvia+URL&
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad182ac7-0a01-0010-4fb8-8a4d217b19c1
Best Regards
````Satish````

How create account document from Sales Document?

Hi.
I hope you are doing well. The scenario is:
1.- Create Lead (Sucessfully)
2.- Create Quotation wrt Lead ((Sucessfully)
3.- Create Sales Order wrt Quotation (Sucessfully), into status tab I have add Transferred to bill. document status
4.- The billing document was created sucessfully, however The account document doesn't exist.
How create account document?
Note:
assign revenue account was configurated into spro
What about BP , I guest , need to create a Billing organization.
Regards.

Resolved to doing transfer to billing action into status tab

How create a bin in lean warehouse

Similar Messages

Maybe you are looking for