How create report server in Application Server

Hi
1. i have installed 2 AS on same system with different NLS_LANG settings.
(English & ARABIC) my report are running through the Report server for ARABIC NLS_LANG to display proper arabic font and direction.Now My Arabic Report Server is corrupted so i want to create new report server inside that AS?
2. Can i delete Report Server from AS?
3. Can i change report server name in AS?
thanx
Najeeb
Message was edited by:
Najeeb ur Rehman

Hi
Thanx for reply
actually i have installed 2 AS on same system with different NLS_LANG settings.
(English & Urdu) my report server for arabic AS is corrupted so i want to create new report server inside that AS.
how can i do this
this statement 'rwserver -install rep_server autostart=yes' will create report server in my developer suit not in AS.
Message was edited by:
Najeeb ur Rehman

Similar Messages

  • Error Creating Reports Server Components when installing 11.1.1.2

    Hi There
    I'm trying to install a A WLS(11.3.2) and Forms/Report 11g (11.1.1.2 bundle) on a Linux RedHat 5.5.
    But when the configuration tools of Forms/Reports is trying to create the reports server I got the following error:
    Executing Task: Creating Reports Server Components
    ALERT: Invalid component name: ReportsServer_fd-red03.in.fd.dk_asinst_1 (Component name must begin with an alphabetic character; may only contain alphanumeric characters, or the underscore (_) or hyphen ( -) characters; and must be 4 to 30 characters long.) Continuing anyway.
    progress in calculate progress4
    Executing Task: Executing: opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
    GJS: About to call startOpmn
    GJS: Entered startOpmn
    *************** Trying to Start OPMN **************
    *************** Executing Command **************
    /home/oastest/Oracle/Middleware/asinst_1/bin/opmnctl startproc ias-component=ReportsServer_fd-red03.in.fd.dk_asinst_1
    As I read the error message is the component name illegale and I guees that whats cause the Report Server to faile.
    But how does the install tool figure out the name: ReportsServer_fd-red03.in.fd.dk_asinst_1 ?
    And how do I prvent it from happens again.
    Note: "fd-red03.in.fd.dk" is the full hostname
    Regards Hans S

    Hello Hans. Did you ever find a resolution to this problem? I'm encountering the same issue and cannot find much information online pertaining to this problem. Can you tell me if you found a solution or any useful posts pertaining to this problem?
    Thanks,
    Pablo

  • Error while install oracle 11G forms and reports  -creating Reports  Server components error

    Hello,
    while install oracle 11G forms and report i face below issue on below step ( configuration step)
      >> creating Reports  Server components error
    [2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property  is not defined. isWebsphereEnabled=false
    [2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property  is not defined. isWebsphereEnabled=false
    [2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property  is not defined. isWebsphereEnabled=false
    [2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
    [2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE

    Ram,
    You didn't read the response in your other thread.
    WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
    John

  • How can I keep a newly created reports server running?

    I have had to create a second reports server under 9ias Rel.2. This server is in addition to the out-of-the-box server installed with 9ias Rel. 2. I created the new server logged on to a Solaris session using the command rwserver.sh server=<new name>. The creation went just fine. I am able to use the new server just fine, EXCEPT if I log off the Solaris session used for the startup of the new server.
    I know this sounds similar to the problem of the default server going down if the unix session is logged off. However, I solved that problem by installed XVFB, using a DISPLAY of other than 0, and changing the opmn.xml file. All that works great. But, it does not seem to have an effect on the new reports server I created.
    Does anyone have any ideas how to get around this issue for reports servers other than the default?

    I had similar prob. but with vnc instead of xvfb.(similar product)
    I put the startup of vnc in the same script as the start of the rwserver.. it looks like :
    export DISPLAY=servername:12.0
    vncserver startup
    wait 5 secs
    set oracle homes etc..
    rwserver.sh server=myrepserver
    I start this script using the unix nohup command :
    nohup startrepserver.sh &
    the vnc server starts and the reports server starts..
    I use a different port (12, 13,..) for reports/discoverer/forms compilation

  • How to create Report Server Cluster in the same server

    Hi, i have created two standalone report server and i want to cluster both server... how i do that?
    OAS 10.1.2.0.2
    Form/Report Services (no infra)
    OS Suse 9 sp2

    Hi,
    If you are talking about host...then when you will start installation of new system it ask for SID then choose different SID...
    Thanks
    Sunny

  • How configure Report Server

    Hello everybody,
    I have just installed Developer 10.
    Yesterday, I made a report JSP from JDeveloper with the Report Builder, but when I execute the page with the local OC4J Server, the page crashes:
    javax.servlet.jsp.JspException: REP-51002: Fail to link to Reports Server central.cie
    'central.cie' is the server where i have installed the database and the Oracle9iAS. In fact, I access to the Oracle Enterprise Manager with central:7777
    The DB Connection is all right, but I don't know which is
    the Report Server.
    I don't know how configure the Report Server, if I must deploy in the Oracle Enterprise Manager or if it has one by default.
    Please help me as soon as possible because I'm in a hurry. Next week I have a presentation of my project and It's only left the reports.
    Thank you very much.

    1) >>>> but when I execute the page with the local OC4J Server <<
    Did you test the report from within builder ? In builder there is a "run to web layout" (a traffic light icon in toolbar). Clicking on it will run the JSP report to web
    2) Docs -
    see below
    In your case see "Publishing reports to web" document.
    3) Setup "trace" options for JSP and see in the log files what error you get. Please post them here
    In the above document see section 3.3.5
    4) Please see in the document the steps to run to JSP
    Section 13.1.2
    Just to see if you have missed anything
    http://web_server.domain_name:port/alias/myreport.jsp?parameters
    5) In your BI Reports and FORMS Midtier (Not Infrastructure install) by default there should be a report server running by the name
    rep_hostname
    For trouble shooting purposes , run a standalone server in the midtier
    rwserver server=<any name>
    and give
    http://web_server.domain_name:port/alias/myreport.jsp?server=server_name&other params
    Thanks
    Ratheesh
    [    All Docs     ]
    http://otn.oracle.com/documentation/reports.html
    [     Publishing reports to web  - 10G  ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [   Building reports  - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [   Forms Reports Integration whitepaper  9i ]
    http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf

  • How setup report server on 9.0.2iDS

    Hi,
    Did you know which are the steps to setup report server in 9.0.2. ids.
    Because I4m having an strange problem.
    Thanks.

    Hi Juan,
    A new whitepaper just got put up on the Reports page on OTN, called "How to Execute Reports Services from 9iDS". This should help get you going.
    regards,
    Stewart

  • Creating reports in adf applications

    what programs can i use to create reports in my adf/jsf application?
    can i use Oracle report or crystal report for it?
    or can u suggest some other programs wich i can use for this?
    thanks in advance :)

    Hi Me J,
    you can have a look at my blog post demo where you can see how to call Oracle Reports server from ADF application. However the post deals with problem how to call Oracle Reports server installed on different domain at least you can see how it works. But you will not find the details about creating or deploying Oracle Reports report nor some others details on calling rwservlet engine. for more details on it check out the documentation.
    http://www.freewebalbum.com/blogs/faces/bjanko/blogs.jsp?blog=bjanko20070803190631
    Branislav

  • How create report at runtime

    hi master
    sir my director give me task that my user selet column in form and push button then create report that have only selected column only
    please give me idea how i create runtime report
    thank's
    aamir

    You may create report with all possible columns, and suppress the columns based on user selections. Columns should be tied with anchors to avoid gaps when columns suppressed.

  • Creating reports using oracle application server

    Hello All,
    I am a complete newbie with Oracle Application Server(OAS) and Oracle reports. My task is to generate HTML and PDF reports using OAS. The current application has a aspx pages(ASP.NET as front end) which calls a third party tool Fast Radar Report which fetches data as per the user need(like month, day, year, product name....) and displays it in a grid format. I have to remove the FastRadar part and use OAS's OracleAS Reports Services components to generate those reports
    I went through chapter 12 of Oracle.Application.Server.10g.Essentials by OReilly 2004 edition
    It briefly glances through that part. But, it seems to mention about Oracle Reports something like "Oracle Reports has a wizard-based frontend called Oracle Reports Developer that can build reports. Oracle Reports Developer is part of the Oracle Developer Suite. The reports created with Oracle Reports Developer can be deployed to the Web using OracleAS Reports Services support in Oracle Application Server."
    I am unclear what to do. Do I need to create the report format in Oracle Reports using wizard-based frontend called Oracle Reports Developer and then deploy it using OracleAS Reports Services?
    Or, is there a way to create the report format using OracleAS Reports Services without using Oracle Reports. I am told we have just OAS installed, don't know if Oracle reports is installed or not as it is done on a remote site.
    Any suggestions would be highly appreciated.
    Thanks a lot.

    Hi,
    One has to develop reports using Oracle Reports developer and then has to deploy it into the application server. To do so you need the Oracle developer suite installed, this has wizards which can be used to develop reports.
    This link might help you http://www.oracle.com/technology/products/reports/index.html.
    Mark it if it helps

  • How create report with data from table and some columns results function ?

    Hi,
    How can i create on apex report region with some columns (of the report) as returned from a table and the other columns as results of plsql functions ?
    for example , I want to create a report like that:
    device last_date error_msg stop/start
    kodak1 06/04/08 null >>
    kodak2 08/03/08 good msg --^--
    kodak3 08/04/08 err msg >>
    3 rows returned
    where the 3 first columns are data returned from the table and the forth column is the result of plsql function (returned for example false) and on that i want to display a button of start ( >> in this example ) or stop ( --^-- in this example)

    Thomas,
    There is no problem here -- this is fully suported scenario.
    1. Bind Table dataSource to Customers node.
    2. Bind individual cell editors to any attribute of customer or any nested node like Address, say create column with InputField as editor, then for "value" property select Customer.Address.Street.
    Your nested nodes (like Address) must be non-singleton, set singleton=false on context designer tab.
    Valery Silaev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • How to popluate user defined values in Paramter field of a report using "Report Server Project", BIDS

    Hello,
    I am creating report using "Business Intelligence Development Studio", creating "Report Server Project" connected to TFS database.
    I have created Variance report and the output of report  as below sample:
    Project   Assigned To      Planned Effort        Completed    Remaining  Variance
    P1            X                        20                        
    10                 5              5
    P2            Y                        10                        
    10                 0             0
    P3            Z                          5                        
    0                  5              0
    By default I made Assigned To as parameter field and its showing data for selection in a drop down box (X, Y and Z) and data also filtered correctly.
    Q. how can I fill resource names in a drop down of my own choice (in this scenario, I want to display only X and Y) and display data based on the selected resource? By default parameter displays all the resources which I don't want.
    I did the below but could not get correct result:
    1. Right Click on "Assigned To" parameter, Clicked on "Available Values" and Selected "Specify values" instead of "Get values from query"
    2. Added X as Label and Value as 2 (Employee ID as mentioned in dbPerson table)
    Drop down displays X but when I clicked on report, it gives an error...
    Appreciate your help on this.
    Regards
    Abdul Kalam

    Hi Abdul,
    From the document, we know that CONSTRAINED flag is used to reduce the risk of injection attacks via the specified string. If a string is provided that is not directly resolvable to qualified
    or unqualified member names, the following error appears: "The restrictions imposed by the CONSTRAINED flag in the STRTOSET function were violated."
    So you need to make sure the members are passed properly to the STRTOSET function. For more details, please see the following links:
    http://ch1n2.wordpress.com/2010/02/21/the-restrictions-imposed-by-the-constrained-flag-in-the-strtoset-function-were-violated/
    http://www.bp-msbi.com/2010/04/passing-unconstrained-set-and-member-parameters-between-reports-in-reporting-services/
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • OFM 11 Configuration Err: Creating Reports Tools + Server Components Failed

    I was encountered with this error during Configuring the OFM 11.1.1.3.0 Linux 64
    Creating Reports Tools Components Failed
    Creating Reports Server Components Failed
    Executing: opmnctl startproc ias-Components
    I restart the wls and the admin server and all managed servers in the ClassicDomian too many times and problem still persists
    I search this forum and other sites before posting this thread
    my machine specification is over VMware 7 on Windows 7 x64 as following:-
    1- Oracle Enterprise Linux 5.5 x64
    2- Database 11g 11.2.0.1.0 x64
    3- wls1033_generic x64
    4- OFM 11.1.1.3.0 x64
    I didn't install Portal neither OID
    Can I Configure these Components Manually after fininshing the Installation ?

    Hello Hans. Did you ever find a resolution to this problem? I'm encountering the same issue and cannot find much information online pertaining to this problem. Can you tell me if you found a solution or any useful posts pertaining to this problem?
    Thanks,
    Pablo

  • Report server run problem (urgent plz)

    i am using developer9i, xp opereting system but i am not able to run report server . infact i dont know where report server reside and how configure report server. otn discussion forum gave me below instructions but i need step by step detail to run report server.
    pls help me.
    i want to see (Please reffer to Note:204538.1 on
    Metalink ) but i could not access metalink.
    registration does not alow me. i have no country on
    country list and no Support Identifier (CSI, SAC,
    Access Code etc.) . but i need access.
    please help me. access with path
    thanks
    mostafizDear see this information this is metalink information
    Note:204538.1
    Subject: Common Reasons & Troubleshooting: "Unable to communicate with the Reports Server"
    Type: BULLETIN
    Status: PUBLISHED
    Content Type: TEXT/X-HTML
    Creation Date: 22-JUL-2002
    Last Revision Date: 08-MAR-2005
    PURPOSE
    ========
    The main purpose of this document is to list the known causes of the "Unable to
    communicate with the Reports Server" error. The terms Reports Server, CGI,
    Reports Servlet are also described briefly for a better explanation of this error scenario.
    This document includes the following sections :
    I. Brief summary on the architecture of Reports Server, CGI and Reports
    Servlet
    II. Sources of errors encountered when running a report with Reports Server
    III. How the CGI (or the Reports Servlet) communicates with the Reports
    Server
    IV. Possible reasons which lead to "Unable to communicate with the Reports
    Server" error.
    1) Reports Server is up and running
    2) tnsnames.ora and sqlnet.ora problems
    3) Effect of parameter "ORACLE_HOME"
    4) Effect of parameter "maxconnect"
    5) Passing very large parameters to reports server
    6) A case specific to OAS 4.0.8.2
    7) A case specific to WEBDB version 2.1.0.9.3
    V. References
    I. Brief summary on the architecture of Reports Server, CGI and Reports Servlet
    =================================================================================
    In order to understand the causes of the error "Unable to communicate with the
    Reports Server", let's first briefly review the Reports Runtime Engines, Reports
    Server, the Reports CGI, and Reports Servlet architecture.
    There are 4 important layers in Reports Server architecture which should be
    understood in order to clearly understand the error "Unable to communicate with
    the Reports Server" :
    1) The Runtime Engines : This is the main layer where the reports are actually
    executed. On unix systems there are "rwrun60" and on NT systems there are
    "rwrun60.exe" processes.
    2) The Reports Server : The Reports Server recieves the job request and queues
    it. When one of its runtime engines becomes available, it sends the
    command line to that runtime engine for execution. On Unix systems it is
    the "rwmts60" executable and on NT systems it is "rwmts60.exe".
    3) The Reports CGI : The Reports Web CGI passes the request to the Reports Server.
    The Reports CGI or Servlet converts the request to a command line that can be executed by the Reports Server and
    submits it to the specified Reports Server. On Unix platforms this executable
    is "rwcgi60" and on NTs it is "rwcgi60.exe.
    4) The Reports Servlet : Its functionality and function is just the same as "Reports CGI", but it is
    a program written in Java as difference to the CGI program (which is
    written in C programming language).
    The Reports Server may be running on the same server with the CGI program (or
    servlet) OR may reside totally on another machine which does not necessarily have
    the same Operating System. For instance CGI may reside in a Windows NT machine
    while the Reports server may reside on a Unix box, or any other combination with
    Unix-Linux-NT-2000, etc.
    The reports are called with a URL similar to below with the CGI :
    http://fully.qualified.server.name:PORT/dev60cgi/rwcgi60.exe?server=<REPSERVER>&other_parameters=...........
    where fully.qualified.server.name is the name of the server where the Reports CGI
    reside, and <REPSERVER> is the name of the server.
    II. Sources of errors encountered when running a report with Reports Server
    ============================================================================
    The Reports Web CGI (or the Reports Servlet) makes a call to the Reports Server
    and asks it to place the output into some destination (defined by DESTYPE and
    DESNAME parameters), then gives back the necessary response to the calling
    program. For example if the DESTYPE is "cache", then the Reports server generates
    the report to a file in a temporary place and gives it back to CGI and the CGI gives
    it back to the calling program. Otherwise, if the DESTYPE is "file", the Reports Server
    generates the report output to the requested file and the CGI replies back the
    following message : "Report output was successfully written to requested
    destination.".
    If there is any error in this process, the related error message is returned. The
    possible sources of errors can be categorized as follows :
    1) The errors that are returned from Reports Server; like the Reports Server can
    not find the requested RDF file or the report may be run to file and the
    directory where the reports output is asked to be placed does not occur or
    similar errors. (Usually the REP-XXXX errors)
    2) Another possible cause of error is the errors returned by the RDBMS to the
    Reports Server, for example a table not found error or things like that. Of
    course from the CGI point of view these errors are again transmitted from the
    Reports Server but in fact the error originates from the RDBMS. (Usually the
    ORA-XXXX errors)
    3) Another possible cause of errors is the CGI itself, for example when the CGI
    executable can not connect to the requested Reports Server, then we get the
    famous "Unable to communicate with the Reports Server". In this document we will
    diagnose the common reasons of this last error.
    III. How the CGI (or the Reports Servlet) communicates with the Reports Server
    ===============================================================================
    Having said that "Oracle Reports Server CGI - Unable to communicate with the
    Reports Server." error is returned back from the CGI itself, let's discuss the
    issue of how the Reports CGI connect to the Reports Server. The name of the
    Reports Server given in the URL with "server=....." parameter is, in fact, just
    a special tnsnames alias, similar to aliases for database connect strings. As it is
    important for the CGI to resolve the alias, the CGI needs to know the HOST name (or the
    IP) of the machine where the Reports Server is running and the port on which the
    Reports Server is listening. So a typical Reports Server alias is defined as follows :
    REP60_<MACHINE>=(ADDRESS = (PROTOCOL = tcp)(HOST = <MACHINE>)(PORT = <PORT>))
    This is defined in tnsnames.ora file, and the sqlnet.ora file is also used in
    the name resolving operation.
    IV. Possible reasons which lead to "Unable to communicate with the Reports Server" error.
    ==========================================================================================
    The possible reasons for the "Unable to communicate with the Reports Server" error :
    1) Reports Server is up and running :
    Make sure that the Reports Server is really running on the specified server
    and listening on the specified port. For details have a look at above
    explanations for tnsnames alias of the reports server. And because of this the
    CGI could not establish a connection to the Reports Server.
    2) tnsnames.ora and sqlnet.ora problems :
    As described above, the CGI resolves the details for the reports server using
    the "tnsnames.ora" and "sqlnet.ora" files. There may be a problem with them,
    here are the possible configuration problems :
    a) There is no alias in the tnsnames.ora file for this Reports Server
    b) The CGI looks into the wrong directory for the "tnsnames.ora" and "sqlnet.ora"
    files. By default the CGI checks the $ORACLE_HOME/net80/admin directory for
    these scripts, where the $ORACLE_HOME is the home of the Forms & Reports
    installation. Please note that in a typical 9iAS 1.0.X installation there
    are two ORACLE_HOME's, one is for the iAS and the other is for the tools,
    usually the home for the tools is a directory with name "806" on NT and
    "6iserver" on unix systems. By defining TNS_ADMIN in the environment, one
    can override the search path for these two files.
    The TNS_ADMIN variable can be defined in one of the following places :
    i) In the environment : On MS Windows platforms check the "Settings
    --> Control Panel --> System". On NTs check the environment TAB and in
    Win2K systems check the "Environment Variables" button on Advanced tab.
    ii) In "6iserver.conf" file. Details are as follows : The main configuration
    file for Apache server is "httpd.conf" file which resides in
    $IAS_HOME/Apache/Apache/conf directory. In this file there is a line to
    include "oracle_apache.conf" and in this "oracle_apache.conf" file
    there is a line to include "$ORACLE_HOME/conf/6iserver.conf" file. And
    in this file the TNS_ADMIN variable could be defined as follows :
    SetEnvIf Request_URI "rwcgi60" TNS_ADMIN=c:\orant\network\ADMIN
    Please note that by defining it this way, the TNS_ADMIN will only be defined
    for "rwcgi60" calls, so the other parts of the 9iAS will not be affected by
    this setting.
    c) In sqlnet.ora the "names.default_domain" is set but in tnsnames.ora the
    domain is not defined in the alias description. For example if the
    "names.default_domain=world" is present and active in "sqlnet.ora" file
    then in the "tnsnames.ora" the alias of the reports server should also have
    the ".world" extension appended at the end. And another cause is of course
    the vice versa for this. If there is no "names.default_domain" is defined
    in the "sqlnet.ora" then the alias in "tnsnames.ora" should not have the
    domain extension.
    Another important point that should be checked is, if TNS_ADMIN is defined
    as described above then the search path is as follows, first the directory
    defined by TNS_ADMIN is searched, if the "tnsnames.ora" file is not found in
    this directory then $ORACLE_HOME/net80/admin is checked. (And on unix systems
    /var/opt/oracle is also checked). These directories are only checked if the file
    is not present, so if the "tnsnames.ora" file is present in TNS_ADMIN directory
    but the alias is not present, then the other directories are not checked at all.
    Let us assume that the tnsnames.ora file is present in the TNS_ADMIN directory but
    there is no "sqlnet.ora" files here, then the sqlnet.ora file is checked in
    $ORACLE_HOME/net80/admin directory, which could cause the same problem if the
    "names.default_domain" is defined in this file.
    All the above will result in, CGI to unable to resolve the alias in tnsnames.ora
    file so it will not be able to establish a connection to the Reports Server.
    3) Wrong "ORACLE_HOME" setting :
    Wrong ORACLE_HOME setting. This is usually the case for Reports Servlet,
    because the environment settings are defined in "jserv.properties" file for the
    servlets and the setting here will effect both the Reports Servlet and the
    setting for Oracle JSP and other servlets. So the other servlets or Oracle JSP
    may need to set ORACLE_HOME to home of HTTP server while the reports server needs
    it to be set to the TOOLS_HOME directory. In this case the best alternative is
    not to set ORACLE_HOME in this directory and leave it to registry or defined the
    ORACLE_HOME in "6iserver.conf" file just like the TNS_ADMIN defined above. For
    details please have a look at the following document :
    Note 179609.1 "Getting an error Unable to communicate with the Reports Server
    using RWSERVLET"
    4) Effect of parameter "maxconnect" :
    Another common case for this error is that the CGI request reaches the Reports Server but
    the Reports Server refuses connection. The main cause for this case is, that the Reports Server
    configuration parameter "maxconnect" is defined too low, there are long running reports on the
    server or the server is too busy at that time. Usually a second try some
    later time results in a successful connection. If this is the case, the end user
    may think that the problem is occasional. For details on this case please
    have a look at the following document :
    Note 125265.1 "Unable to communicate with the Reports Server"
    5) Passing very large parameters to reports server :
    Another known reason for this error is, if you are passing large parameters
    to the Reports Server which exceeds sqlnet transmission blocks then the request may
    end up with this error. To test it try with small parameter values. If you hit
    this case, the solution is to increase the SDU (Session data unit size) and the TDU
    (Transport unit data size) parameters in tnsnames.ora file, for details please
    have a look at the following document :
    Note 197358.1 "Passing large parameters to Reports show up a Reports Server
    error"
    6) A case specific to OAS 4.0.8.2 :
    If you are using OAS instead of iAS, and the error appeared after
    upgrading to 4.0.8.2 then this is caused because the 4.0.8.2 is using RSF
    (Required Support Files) version 8.1.6 and the Reports 6i is using 8.0.6 and the
    two could not reside in the same ORACLE_HOME directory. So the solution for this
    problem is to create a new batch file and use it from which the actual CGI
    executable is called. For details please see the following document :
    Note 116754.1 "After applying OAS 4.0.8.2 CGI and Cartridge cannot communicate
    to report server"
    7) A case specific to WEBDB version 2.1.0.9.3 :
    Another known case for this error is with WEBDB version 2.1.0.9.3 or less.
    If you are using these old versions of WEBDB as HTTP listener, please have a
    look at the following document :
    Note 95426.1 "URL Not Found When Calling Oracle Developer Report from WebDB Site"

    On Windows you can create a Report Services:
    rwserver -install server=repserverYou have to choose different names for all servers, like your collegue cannot create a server with the same name. You can start/stop this Report server in Services (control panel). Configuration files can be found under $ORACLE_HOME/reports/conf
    Martin

  • Oracle Report Server Creation in Forms11g

    Dear All
    I installed oracle forms 11g r2 on windows 7 sp1 64 bit, every thing is okay , forms running without any problem ,
    but i don't know to to run reports and how i can create report server , can any one help me in details ?
    Thanks in advanced

    Hi,
    how i can create report serverIn the installation did you choose the report server to be installed ?? if you choose it, you already have a a report server. In you navigator go to:
    http://hostname:8090/reports/rwservlet/showjobs
    The page must show you the report server's name by default :)
    Regards
    Carlos

Maybe you are looking for