How customize the buttons in Mobile Project?

hello,
I would like to customize the buttons (s: Button), I would do it completely black, but it is still the glow. How can I remove this glow?
Otherwise, how do I replace the entire button with an image?
Better to override the class or using a FXG?
thanks

For what it's worth, I detail every one of these in my book, available on Amazon. Otherwise, you're pretty much asking for instructions on how to use a dozen different effects. Kind of difficult to do on a forum post (though I don't doubt ATR will try). Is there one or two you're particularly interested in?
I assume you can figure out cut, copy, paste and unlink audio and video. The Fade option, of course, adds a video or audio fade to the beginning or end of a clip. Paste Effects and Adjustments pastes all of the effects and adjustments you've applied to one clip to any other clip or clips.
Seriously, this would be easier if you'd narrow the scope of your question down a little.
But, meantime, you can start by checking out my free 8 part Basic Training tutorial series. Although it says it's for version 11, all of the tuts are also applicable to versions 12 and 13.
*** Premiere Elements Basic Training ***
You may also want to check out my complete course on Premiere Elements at lynda.com if you want detailed explanations and demonstrations of each feature and tool.

Similar Messages

Quiz Review--how can I change/customize the buttons in CP7--now showing "back" and "skip"

Hi,
I am using CP 7 and giving learners the opportunity to review their quiz questions. The review works fairly well, but the buttons at the bottom are not correct. Should say Back and Next or Continue. I don't see a master slide for this, like the Results master slide, where I can edit. Have not found anything useful yet under Object Preferences. Also would be nice to position them. Thanks.

I never show the Next button on a question slide, but drag it under the Clear button, so that it becomes only available during Preview. A skipped question cannot be answered anymore when coming back, it is only confusing. For the same reason I will rarely allow backward movement. Only with the option 'Submit All' it is possible to retake questions within the same Quiz attempt.
Question Question Slides in Captivate - Captivate blog
Question Question Slides - Part 2 - Captivate blog

How customize the customization page?

Hi all,
in the component wizard there's a page to customize the customization page. But if this is not enough, is there any other way than editing the package in the database?
I should need to change the detail captions, for example, the the to be displayed on the customization page.

Hi,
That is the maximum to which you can customize your customization screen. This feature is not available right now.
Thanks,
Sharmila

How are the buttons reffered in JSP scriptlet

hi all
i am currently working with enabling and disabling of buttons at run time using functions in scriptlets which is refers
document.form name.button id.disable=false;
the error raised so far document.form name.button id is null or not valid

thanks for replying
but its still not working
i'll show you the code
function alert1(sam)
          var a=sam.value.split("|");
          var code=a[0];
          alert("Fund Group Code is :- "+a[0]);
          var name=a[1];
          alert("Fund Group Name is :- "+a[1]);
          var status=a[2];
          alert("Review Status is :- "+a[2]);
          var operatorID=a[3];
          alert("Status is :- "+a[3]);
          //var isReviewer=document.myform.reviewerFlag.value;
          document.myform.addreview.disabled=true;
          document.myform.modify.disabled=false;
          if(reviewstatus == Pending)
               document.myform.sendforreview.disabled = false;
               document.myform.addreview.disabled = true;
        if(reviewstatus == Pending_Reviewed && userID!=operatorID && isReviewer == REVIEWER)
             document.myform.addreview.disabled = false;
             document.myform.sendforreview.disabled = true;
        if(reviewstatus == Reviewed)
             document.myform.addreview.disabled = true;
             document.myform.sendforreview.disabled=true;
        document.myform.FundGroupBean.op.value= code;
//          document.myform.action="viewreview.jsp";
//          document.myform.submit;
</script>
<% ResultSet rs= (ResultSet)request.getAttribute("rs");
                    while(rs.next())
                    {%>
                         <tr>
                         <td>
                         <input type="radio" id ="radio" value="<%=rs.getString(1)%>|<%=rs.getString(2)%>|<%=rs.getString(3)%>|<%=rs.getString(4)%>"
                         onclick="alert1(this)"     /></td>
                    <td><%= rs.getString(1)%></td>
                    <td><%= rs.getString(2)%></td>
                    <td><a href="viewreview.faces">
                    <%if(rs.getString(3).equals("1"))
                                        out.println("Pending");
                                   else if(rs.getString(3).equals("2"))
                                        out.println("Review Pending");
                                   else
                                        out.println("Reviewed");%>
                              </a>
                              </td>
                    <td><%if(rs.getString(4).equals("1"))
                                        out.println("Active");
                                   else
                                        out.println("Inactive");
                              %></td>
               </tr>
               <% } %>

How customize the Login Screen

I have put a login portlet on my portal homepage and set it as the default homepage. but when i try to get on it by URL, it always bring me to sigle sign on page to login.
can anybody tell me how to set this homepage to be login screen?
thanks a lot!!

Hi,
Make this page the default home page for the public user. This way this page will be the first page before login.
Thanks,
Sharmila

How to change the button dynamically?

Hi,
My Application is that,when i will press the button(on state-Enliglish text will come on the button,off state-Hindi Text will come on the button).
So,my problem is that i can't write hindi text on the button,so only way is that i can port the image from the file,so how cal i do this without customizing the button.
With Regards
Dibya

Broken Arrow wrote:
Baji wrote:
Place a boolean button in the LabVIEW front pannel and right click>>Advance>>Customize. ......
Message Edited by Baji on 05-29-2009 04:23 PM
The question, for whatever reason, was how to do this without customizing the button, although your solution is obviously the best way to do it, and how it is meant to be done.
So, my question to the original poster, why can't you customize the button like Baji has suggested?
Agreed.
I would also encourage posting both in English and your native tongue to try and clarify the issue.
Looking forward...
Dynamic language changes are best handled using property nodes to change the captions and text of all FP objects. It is a lot of work to set-up the first time but once completed, maintaining the code is straight froward.
If there are issues with just changing properties not fullfilling all reqs then a Picture Control takes care of most of the "all other cases" rather well (but is seldom trivial).
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Customize the workspace buttons?

Is there a way to customize the workspace buttons? There are only a few buttons there currently, and a lot of wasted space. The workspace bar used to have a variations button but that has been removed in this version. There are other commands I would like to add to it as well. Is there a way to customize this? I tried control, left, and right clicking on a blank area of the workspace bar but nothing happened.

No, you cannot customize the button bar.

Popups / User Prompts In Mobile Projects?

Is there a quick way prompt the user in mobile projects? For example, if a user forgets to enter a field in a form before clicking the submit button. I've reviewed some of the mobile project examples and noticed that it's usually handled in a separate view (the Employee Database comes to mind). Is there a way to do it with a popup of some sort rather than pushing another view???
Thanks in advance!

Anyone???

Customize the workspace pannels in coding

dears
does any one know how to customize the pannels provided in the workspace using Coding ??
where is the pannels code and how can we edit them??

No, you cannot customize the button bar.

How can Tomcat see a Tomcat project created within eclipse

Hi
I used to make web projects using tomcat, and then i found that eclipse allows u to create Tomcat projects.
My question now is that, for the tomcat to see a web project it has to be placed in the webapps folder, but now using eclipse how will the tomcat see this project as it's not placed automatically inside its webapps?
i think there s a specific way to force the tomcat to refer to tomcat projects created from eclipse, right?
can anyone help me with that
thanks in advance

Try configure the server in eclipse. Search for a tutorial about how to register a server within eclipse.
http://help.eclipse.org/help31/index.jsp?topic=/org.eclipse.wst.doc.user/topics/overview.html
Hope that helps

How do I customize the Table Of Contents Expand ( ) button?

I have a client that would like to change the color of the TOC Expand (>>) button which is by default a light grey. I have tried changing all the options in the Skin Editor under Table of Contents, Playback Control and Borders, and nothing has worked. Am I missing something obvious or is there no way to customize this button?
Thanks in advance!

Hello,
You might not be able to change the color of Expand button but you can add your own customized images.
1) Launch Adobe Captivate 5.5 project
2) Click on Project -> Table of Contents
3) Click on the Setting button
4) Under TOC settings, you have Expand Icon and Collapse Icon sections
5) Click on "Folder button" and browse your picture
Screenshot :
This is how your output will look :
Hope this helps !!
Thanks,
Vikram

How to Configure the Buttons on the QAF for Mobile UI Screens...

Hi Experts,
I am in a serious need of help from the experts who already designed the Mobile UI screens.
I have built a add-on where now we are looking this add-on to be available to use in mobile applications also. Now here what I did is I have developed OWL and QA floor plans which will be used for Mobile Only. This option of selecting only for mobile is available to us while we are creating screens. In this way I have designed the screens and attached them to the work center views.
These views are attached to the work center floor plan and this is been assigned to my user. When I tried of viewing the designed screens using my android mobile I am able to see the screens owl and Qaf as of designed, but now the problem is existing here.
When I am trying to perform one of the custom action which i have configured on the QAF floor plan the button which is configured with this custom actions is not visible at all. Not only this the standard action button on the tool bar of the Qaf like "Save" "Close" those are also not visible. I am not at all seeing any of the button on my QAF screens. With out these button I cannot go further to complete my process and complete transaction will not be done untill unless some of the custom actions which were configured on the screen. These custom actions are the action which I have declared in the custom Bo and developed with some code over there with the help of ABSL script.
I have followed the SAP 1402 documentation but there it is not clear how to do it. I have done every step of the document but no use with it. Please needed any other real time expertise help who worked already on this mobile screens.
Regards..
Hanu K

Sorry but your posting is pretty confused for me.
At first you wrote:
>I can use Play/Pause, Stop, Forward and Back in Winamp
Later you wrote:
>and WINAMP to the MEDIA BUTTON
What now? Can you use media buttons with Winamp or not. As far as I know something like this is not possible because Toshiba has designed tool that controls WMP only

How to Use an Image to Customize the Static Button Widget

Can I just get someone to help me figure out how to use an image to customize the static button widget, please?
I have tried using several different types of images, but none of them seem to actually change the appearance of the button.
Thanks!
Laura
Captivate 5.5

I tried to use the tools within the widget itself - it offers you the opportunity to use an image (see screenshot below).
I also opened it in Flash and tried to replace the images for one of the button styles there w/ my own, but in re-publishing the SWF from there I broke the widget. When I attempted to use the edited widget, there were no customization controls available after I inserted it (see screenshot two below).

How to customize the prev and next buttons separately in slideshows?

Is there a way to customize the prev and next buttons separately in slideshows in muse? When I import a background image that looks like a right arrow it puts the image for both prev and next buttons. I import it by selecting the next button, and then clicking on the folder icon labelled "Image" in the Fill drop-down menu in the Tool bar at the top of the Muse page.

Yes, it should be very easy. Here is how I do this:
First, I move the arrows onto the image, and double click the box so that I can remove the arrow character.
Then, I go up to the "Image Fill" and click the file icon to fill with an image
Then, I select the other arrow, and do the same
Hope this helps!
Julia

How can I customize the navigation bar in Firefox 29? I would like to have the refresh/stop button back in front of the navigation bar!

How can I customize the navigation bar in Firefox 29? I would like to have the refresh/stop button back in front of the navigation bar!

There isn't a built in way to do that since all the navigation toolbars are on one toolbar.
You can restore this functionality by installing the Classic Theme Restorer add-on
*https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/

How customize the buttons in Mobile Project?

Similar Messages

Maybe you are looking for