How d i get my printer to work on eprint

how do i get my printer to work on eprint

Hi,
Does your printer support this ? What is it ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How can I get my printer to work after a Yosemite update?

How can I get my printer to work after a Yosemite update?

Hi there michaelfromepsom,
You may find the printer troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
-Griff W.

How do I get the printer to work with AirPort?

I have had my printer connected via USB cable to the AirPort for a while, but recently when I had to disconnect the printer for some home improvement, I ended up with problems.
Upon reconnecting the printer to the AirPort, I started receiving this message:
USB Power
A device connected to this Apple Wi-Fi base station's USB port requires more power than this Apple Wi-Fi base station can provide. Plug the device into a power supply if possible, or connect it to a powered USB hub.
My printer is connected to a power source, but I still cannot print to it. I can see the printer when I send something to be printed, but it will not actually print.
Does anyone have any ideas on how to get my printer to work again?

Thanks for the detail. The dash separates the "main" and "guest" network.
There are a number of settings that are 2.4 GHz on both networks. The only time the dash separates 5 GHz and 2.4 GHz is on the last 3 settings.
Since the printer specifications available on the HP site show it is a b/g device only, I suspect that the printer does not like the current guest setting of 802.11 b/g/n you are currently using, which is also what it would be if the AEBS was set on Automatic.
Try the following setting:
802.11n only 5 GHz - 802.11 b/g
It's really the only choice that would keep the 5 GHz that you want on the "main" network and possibly allow the printer to connect. Unfortunately, the optimal choice for range and speed is not the setting that you may need to work with the printer.
If the printer still won't connect, I would call it a day and when it comes time for a new printer, look first for an ethernet device or at least an "n" device that will handle 5 GHz if you want a wireless printer. The advantage of an ethernet printer would be that it would also work over your wireless.
Please post back on your findings.

How do I get my printer to work with my iPhone/ipad wirelessly

how do I get my printer epson workforce 610 wirless to work from my iphone/ipad? I downloaded the epson printer app.

Maryannebrabander,
Your comment " ... It was printing great until I did this upgrade." brought to mind a thought:
If you're ever in the SIlicon Valley area of California, specifically Mountain View, CA, I strongly recommend a visit to the Computer History Museum there. This page from the Museum website shows a Calcomp plotter advertisement from 1969:
http://www.computerhistory.org/revolution/mainframe-computers/7/161/689
My question to you is should the iPhone be able to print to the Calcomp plotter? If not, exactly how old would you have a printer (or plotter) be before you dropped support for it? If you ever do drop support, then that would occur at some discrete time - one day it would work, then something would be updated and it would no longer work.

How do i get a printer to work?

Hello i am new to mac os i have used windows all my life so im not quite use to mac os yet so iv tried to set up the printer to work from my macbook pro but i cant get it to work. the printer is on a homenetwork connected to a windows computer which it is sharing the printer on the network i have other computers that can access the printer but they are all windows pc's. my printer came with driver software for macintosh and i have installed it but still i can not selet the driver software and still does not work
can someone help
thank you

When you turn on printer sharing your mac becomes a print server and will advertise the printer using the bonjour protocol.
So on your pc download and install Bonjour For Windows
Scanning is not supported however.

How do I get my printer to work with odd size paper.

I'm trying to print a retun address on an envelope 5 3/4" x 4 3/8" and apparently I need to have a paper setting in my printer match the paper size in Word.

Maryannebrabander,
Your comment " ... It was printing great until I did this upgrade." brought to mind a thought:
If you're ever in the SIlicon Valley area of California, specifically Mountain View, CA, I strongly recommend a visit to the Computer History Museum there. This page from the Museum website shows a Calcomp plotter advertisement from 1969:
http://www.computerhistory.org/revolution/mainframe-computers/7/161/689
My question to you is should the iPhone be able to print to the Calcomp plotter? If not, exactly how old would you have a printer (or plotter) be before you dropped support for it? If you ever do drop support, then that would occur at some discrete time - one day it would work, then something would be updated and it would no longer work.

How can I get my printer to work in FireFox?

my printer will not work in Firefox. I have it listed as my default printer, but it still will not print.

I am not sure I understand ''it still will not print. ''
If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

How do i get my printer to work?

i am trying to get my pritner on parallels to work. i downloaded the dirvers, but wen i attempt to update them it does not work. is there a website where i could download drivers for an hp photosmart 7660. pelase help!!

Since Parallels is not an Apple product, you should post your question in the Parallels discussions, rather than an Apple forum:
http://forums.parallels.com

How do I get the printer to work on my hp psc1210v. Every thing else works?

I have an older machine (hp psc1210v all in one)The copier has been working, but I want to use the printer and scanner portions. I do not have an operating disc.

If you just want be able to print, you can simply connect the printer with a usb cable, it should plug-n-play.
If you need the full functionalities, i.e. scan, etc. download and install the hp driver software: http://ftp.hp.com/pub/softlib/software3/COL6316/mp-19447-3/rw2_021_w02_enu.exe
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

HT3500 I have mosx Lion have no driver for my photosmart c4580 printer and the printer test page gives no ip address. How do I get my printer to work?

We bought a new Mac bookpro using the latest version of lion 10.8. We also have a c4580 photosmart printer and have bee unable to find a driver down load for this printer and our Macbook. We have tried to use u tube and other sites including Apple support to try to connect to our printer. We run a printer test page and the ip address comes up "not applicable". Do we need to connect the macbook to the router? What are we doing wrong? HP site will not give us a driver download. I have to buy it. Seems simplar to goand buy a new printer but this one is still good. Can anyone help? We are not as software savy as alot of you out there. Thanks.

Download the HP drivers here:
http://support.apple.com/kb/DL907
Download the Epson drivers here:
http://support.apple.com/kb/DL1398

Can't get my printer to work

Hi, I have just bought an apple iMac and I can't get my printer to work. It is a Sansung ML laser 4500. I tried to download a driver on thee Samsung website but can't get a driver. Please advise how I can get this printer to work as I don't want to buy another printer.
Please help.
Michael

Samsung does not have an OS X driver for their 4500 series printers. You can check in Print & Fax to see if a driver is provided in OS X, but if Samsung doesn't make a driver for OS X then it's unlikely you will find one that works. Of course you can try the Generic driver, but no guarantee it will work. If it does only some printer functions will be supported, if any.

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

How can i get my wireless to work on my printer hp officejet pro 8600

how can i get my wireless to work on my printer hp officejet pro 8600

You'll get faster help w/this question by posting it in the Wireless forum...here:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/bd-p/Networking
I am an HP employee.

HT4356 I can't get air print to work from my iPhone 4. I've verified everything. Th phone gets WIFI from AT&T. Computer's WIFI through Netgear, Charter. How do I resolve this?

I can't get air print to work from my iPhone 4. I have newest phone operating system, and the phone is air print enabled.
The phone gets WIFI from AT&T. My computer, to which my printer is wirelessly connected, gets WIFI from Charter Communications and a Netgear router.
That must be the problem. How do I resolve that?

For Airprint to work your iPhone and printer must be on the same local network. Your printer must support Airprint (see here for list: http://support.apple.com/kb/ht4356).
Can you connect your iPhone to the Netgear router WiFi?

How to get Network Printing to work with Brother!!

So i have my BROTHER DCP-7020 printer connected to my Windows machine and i've been sharing the printer on the network with my old iMac 24' which prints perfectly. Now i have the 27' imac and i have no idea why it won't do printing via network, plugging in USB works fine, i've installed the driver but it doesn't look like it did anything. It just worked on my 24' without any hassle, it gets detected in the "Printer Settings" automatically and i dont recall doing anything to get it to work before.
Can anyone give me some tips of why it won't print and what I need to do in order to get network printing to work on my new Mac?
By the way BOTH MACHINE runs SNOW LEOPARD.
Thanks in advance.

Here's the troubleshoot: http://support.apple.com/kb/HT1404
And here is the manual method: http://support.apple.com/kb/HT3049
Hope this helps!

How d i get my printer to work on eprint

Similar Messages

Maybe you are looking for