How data replicate from R3 to CRM
Dear Experts,
I want to know how the data replicates SD customers to CRM Business Partners.
Regards,
SAP Collegue.
HI Anand,
http://help.sap.com/saphelp_crm70/helpdata/en/04/4d9ac77b2b11d3b52f006094b9114a/content.htm
If you need more info, get back to me.
Regards,Satish
Similar Messages
-
How to read and display table data entries from ERP in CRM
Hello experts,
I am new to CRM. I need to read data base entries from ERP in CRM system. What would be the best way to do . The table is a standard SAP table with a custom include (several customer fields). Calling a web service would be the best way..? or is there any other way that I can do it too.
Also, to display these entries what would be the best tool? Should I built my own transaction/report to do it?
Any advise or guidance would be a great kick start to learn the CRM development environment.
Regards,
jafferyHi,
Check the below wiki link if it helps.
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Also, you can try an option of transaction launcher.
Hope this helps.
Regards,
Chandrakant -
How to transfer Material Master data information from ECC to CRM
Hi ,
Changes to the Classification data of Material master for the class type-001 and Custom
ZFIELDS on mara will trigger the Interface functionality. Any changes to the
custom zfields and classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
Regards,
PavanHi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful -
Data updation from R3 to CRM using CRM_DATAEXCHG_BADI.
Hi,
While transferring the data of equipements from R3 to CRM, we want to transfer the status of the equipement (data element J_STACT).
I am using IF_EX_CRM_DATAEXCHG_BADI~CRM_DATAEXCH_R3D_MBDOC_FILL to update the status before transferring the data to CRM.
Here I am getting status of equipment from R3. Now how do I update the status in ct_bus_trans_msg.
I need to update ct_bus_trans_msg-ORDPRP_OBJL_I_D-IOBJECT_ID.
Thank you.Hi,
Internal table ct_bus_trans_msg have several segments.
These segments are similar to Bdoc meaasge.
There is segment called STATUS_H. You need to populate this segment with status form R/3.
Please reward points if useful
Murali -
Data retraction from BW to CRM
Hello All,
I would like to get your expert suggestions in one of the below scenario:
1. We have customer sales information in a info cube which is coming from ECC. Now we need to send this customer sales information to CRM (Ztable) system.
2. As we can't replicate all business complex calculations, we can't get this information directly in ECC system. Hence we can't avoid intervention of BW system.
Hence the data flow looks like ECC-> BW-> CRM on monthly basis.
My questions are :
1. What is the best possible way to send data from BW to CRM.
2. What all are developments needs to be done in BW & CRM (In CRM we need to push into a custom table).
Thanks in advance.Hello All,
We have an option called RFC destination and DB table as destination for Info spoke. I have give CRM system details (which is connected with BW system) and I stuck up with the following error.
Error: SYSTEM_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target
Function module "RSB_API_OHS_3RDPARTY_NOTIFY" not found.
Please let me know is there any settings missing.
Regards,
Venkat -
Data transfer from BW to CRM using infospoke.
Dear All,
I need to move data from BW to CRM box. I have created an info-spoke for business partner and need to move 3 attributes of business partner into three fields of business partner master data in CRM.
These three fields are added in the BUT000 table. I have tried the RFC destination option in infospoke but somehow, i am not able to figure out how to move data from the info-object of business partner in BW to a table in CRM.
Can someone help here ?
Thanks,
Mukund.Dear All,
I need to move data from BW to CRM box. I have created an info-spoke for business partner and need to move 3 attributes of business partner into three fields of business partner master data in CRM.
These three fields are added in the BUT000 table. I have tried the RFC destination option in infospoke but somehow, i am not able to figure out how to move data from the info-object of business partner in BW to a table in CRM.
Can someone help here ?
Thanks,
Mukund. -
Problem in data transfer from BW to CRM
Dear Guys,
I am facing one problem when i am tranfering the data from BW to CRM system (using Analysis Process Designer).
When i am transfering data from standard ODS, data has changed properly.
But in custom ODS, data has not changed.
In both part, upto aggregation data has come.
Any thing i have missed out in custom ODS.
Please anybody give inputs.......
Thanks in advance.
Regards,
Vivek.VHi Vivek,
There is no special process for this cube load. Just check the job log and check for any short dump in R/3 while running the extractor.
I checked the datasource help link for this cube but there is nothing special mentioned:
http://help.sap.com/saphelp_nw04/helpdata/en/da/f7bc3961d4f339e10000000a114084/content.htm
Bye
Dinesh -
Master data replication from R3 to CRM
i have pulled the master data from R3 to CRM .data is showing in table but000 and crmm_but_custno but it is not showing in the BP transection.
when i am searching in BP it is not showing but i can see in the table(but000 and crmm_but_custno)
What should i have to do .
Pl suggest !!!!Hi sunil,
while searching for data in BUT000 are you searching based on BP number or content of the table? At the same time while searching with TCODE - BP on what basis you are searching?
If the data is replicated into the BUT000 it should come out with the T-Code BP also. For your problem there will be 2 possibilites.
1) the data is not at all replicated and you may looking at the old data.
2) Due to improper number ranges for R/3 and CRM eventhough the data is replicatd into CRM you can't find it because it taken some other number range.
For ex: you have created a Customer in R/3 i.e 5000456, when replicated it will take some othe number XXXXXX.
So, while searching with BP T-Code search data on the basis of first name, last name or searchterm instead of BP number. -
Hi all,
It is possible to get all data from BIW to CRM.
Scenario: all transaction and master data is maintaining in the external system and all data extracted in to the BIW for reporting can we take data in to CRM server to perform certain activities in CRM.
If possible what setting i have to do in CRM.
Thanks and regards
Apoorva AsthanaHI
using APD we can extracting You must create an analysis process for a data mining method to train a data mining model. The purpose of training a model using historic data is to allow the model to learn from the historic data. The training result can then be used for a prediction or in the operational system. You can create a training process for the data mining methods:
You can transfer the values determined in the SAP BW to SAP CRM and place these values in attributes u2013 essentially business partner attributes in the Analysis Process Designer
pls go through this link
http://help.sap.com/saphelp_nw04/helpdata/EN/6e/86833ceb3d062de10000000a114027/content.htm
thx
vijender -
Data replication from R3 to CRM
Hi Experts,
My requirement is to fill the Category field of CRMD_ACTIVIY_H table in CRM with the BSARK field of VBKD table in R3.
For this I have tried to implement the logic in the method CRM_DATAEXCH_R3D_MBDOC_FILL of BADI CRM_DATAEXCHG_BADI, but unfortunately I cannot find any data in CT_BUS_TRANS_MSG-ACTIVY_H.
Please advice how to proceed in this regard.
Thanks in advance.
Regards,
RakeshHi Gabriele,
I am able to debug the my implementation of BADI CRM_DATAEXCHG_BADI but i am not able to find any data in the internal table CT_BUS_TRANS_MSG-ACTIVY_H where we need to fill the actual category field data from BSARK field.
I am able to get the BSARK data in this BADI but the problem is i cannot find any data in the internal table CT_BUS_TRANS_MSG-ACTIVY_H where we need to update the category field with the data of BSARK field.
So could you please let me know where actually the ACTIVITY_H table gets filled.
Thanks & Regards,
Rakesh -
Hi Mates,
I have added few fields in BUT000 via EEWB and now need to fill these fields from BW .
Is there any Documentation how i can do.?
Any help would be greately appreciated !
regards.CRM is connected to BW partly by Middle ware and partly by RFCs and BAPI calls.The data is transfered to BW first by initial load and then by Delta load.SO I guess u need to write a BDOC to update the data to BW and then calling that BDOC.
Thanks,
ashish. -
How data retrieves from an Oracle table
Hi,
I have inserted record by record with record_number in a Oracle table. I have executed below query in PL/SQL developer. It displayed the result in same sequence order how I have inserted. But when in Toad it given in different order which does not have any sequence.
select * from bbs_user
Anyone please explain this why it is? Please treat this as very urgent.
Thanks in advance.Welcome to the forums.
In a forum of volunteers, not being a support forum, there is no such thing as 'very urgent'. Your use of this two words in your very first post must be considered insulting and rude.
Also it appears you are completely clueless with respect to relational databases. Relational databases are about sets.
By definition -in mathematics- a set has no order.
If you want your data ordered you must use the ORDER BY clause in your SELECT statement.
Also I notice both Pl/SQL developer and Toad are non-Oracle products, so questions about these products do not belong in this forum.
Sybrand Bakker
Senior Oracle DBA -
BP ship to mode of transportation - How to replicate from R3
Hi all,
In CRM there is field Mode of Transport ( for ship-to role> shipping)
I whish to replicate its customization from R3 via R3AS.
In R3 it is customized :
Logistics Execution -> Shipping -> Basic Shipping Functions ->Routes -> Define Routes -> Define Modes of Transport.
does anybody know Which replication object include this field customization (DNL..)?
Thanks
RachelHi rachel,
Mode transport is saved to the R/3 table TVTR and I don't see any standard middleware object that bring this table into CRM. You might need to create a custom object to map the tables across the systems. Moreover in CRM side this value is maintained as part of a structure and not to a direct transparent table.
Thanks,
Paul Kondaveeti -
Data updated from R3 to CRM via middleware
Hello all,
I have a scenario where a material updated in R3 is automitically updated in CRM through middleware. The problem is that in the data there is a field, sales organization, which is not being sent correctly to CRM. I need to find the source of this data in R3. Can anyone guide me where do I start?B926 is the containing sales organisation.
Regards
Shashi -
Debugging Middleware/BDOC when the material data transfered from R3 to CRM
Hi,
I am updating the status of Product in CRM using BADI - PRODUCT_CUSTOMER2 (R3_TO_CRM_MATERIAL). This happend when the status is updated in ECC (MM02).
Now the problem is, I want to debug this BADI, when the material is updated in MM02.
Could you please help me, how can I debug this BADI.
Thanks,
SandeepHello Sandeep,
Please check below general steps to debug the delta download of ECC material.
in R/3
Set a break point in the function module CRS_MATERIAL_COLLECT_DATA (BTE Implementation)
Create/Change the material in R/3 by using transaction MM01 or MM02 and press save button.
Now you can debug the function module CRS_MATERIAL_COLLECT_DATA
in CRM (inbound queue)
Deregister the inbound queue R3AD_MATRIA* in transaction SMQR
Go to the transaction SMQ2 select the inbound queue and debug the queue
Set a break point on the mapping function module: COM_MAP_BAPIMTCS_TO_PROD_MAT
for validation debugging Set a break point on the validation function module: COM_PRODUCT_MAT_VALIDATE
I am sorry that I do not know where BADI PRODUCT_CUSTOMER2 is called.
Hope the baove information could be helpful.
Best regards,
Maggie
Maybe you are looking for
-
TimeMachine refuses to make backups (backup volume could not be found)
Let me start by saying that I'm new to Macs, so if you're going to make suggestions involving strange and arcane steps in Terminal (which I'm completely open to trying), please try to be as clear as possible When I set up my new iMac, everthing worke
-
How to work with Premiere Pro cs5.5 and After Effects cs5 together?
I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects
-
Messaging is very slow on ios 8.2 with iPhone 4s
After upgrading my 4s to ios 8.2, messaging is very slow - it can take 30 seconds to open messaging, view list of messages or open a single message. Sometimes messaging 'gives up' and returns me to home screen. Anyone else experiencing this?
-
Azure Website domain won't configure
I have tried to setup a custom domain for DNS for an Azure Website running on Shared infrastructure (the one above the Free tier). I have added a CNAME record 24 hours ago called awverify.mydomain.com and awverify.www.mydomain.com (I did both). I ca
-
Is there a way to convert .cwk text files I saved from my iMac PPC so I can view them on my new iMac (intel chip)? I get a message when I try to open them now that says PowerPC applications are no longer supported.