How DCS (Distributed Control System) can be establish to PP-PI

Hi SAP Gurus,
Client is looking an interface between DCS to SAP. But I never worked on that.
Can anybody give me some stuff on that. e.g. How it works and how it can be connect.
Please reply soon.
Thanks and Regards
Vivek Rastogi

Hi Vinod,
Thanks for reply.
Can you please provide some docs on that.
Regards
Vivek

Similar Messages

Can i know the differences between distributed control system and plc

also i needto know about the various functional units in a gas based co-gen plant

Wide open question with a lot of grey area.
Basically:
A plc is told to go and it does it thing until either a predetermined set of conditions is met or somebody pulls the plug on it.
Distributed control can be made up of a group of plc's communicating to a supervisor that can cause interaction with various plc's process controllers etc.
Typically, the supervisor will "download" operating parameters to the distributed units ie set points....
The unit is then responsible for achieving that setpoint.
This is very generic. Can you be more specific?

How do I control who can print over my wireless Officejet Pro 8000 A809n?

Hi all,
Looking for some help as to how I can control who can/cannot print over my Officejet Pro 8000 A809n (CB047A) printer.
We have multiple users in the house, but I only want to allow certain people to print wirelessly, is there some way I can set this up?
Any help would be much appreciated!

Sorry, you cannot control this other than to remove the printer from the network, turn it off or otherwise disable it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do we control who can approve items in a list?

We are building a referral bonus list that needs to go through 4 levels of approval before being paid out. I've created the workflow, but I can't figure out how to control who is allowed to approve it. For example, it would be bad if an employee
can enter the item, and then approve it as the Manager, Director and VP so that Finance gets notified and puts it on his check.
How can I set it so that only management-level personnel are able to approve/reject specific items within the list?
John

Hi John,
If you are using a custom list as referral bonus list, you can use the PowerShell to enable the option "Create items and edit items that were created by the user" (you
can check if you need to set "Read items that were created by the user" ), then all users could only edit his own created items, then you grant "Manage lists" permission
to Manager,Director and VP on this custom list and they will be able to view and edit all items.
http://www.hersheytech.com/Blog/SharePoint/tabid/197/entryid/28/Default.aspx
If you want only Manager, Director and VP to be able to approve/reject the Approval Workflow task items, you need to grant them Contribute permissions or higher on Workflow Tasks list, and remove all others' Contribute permissions.
http://sharepoint.stackexchange.com/questions/35619/what-type-of-permission-user-needs-in-order-to-approve-workflow-task
Thanks
Daniel Yang
TechNet Community Support

How many solution manager systems can a satellite connnect to?

Hello All,
I was just wondering how many solution manager sytems a single satellite can connect to?
thnx!

Hi Drew,
Thats a interesting point to check ..and wonder if i can ever simulate this one ))
coz..my landscape has a max of 2 solman systems...and i can not think of having many SOLMAN's in a single landscape.... but i assume u can make multiple entries in BCOS_CUST and proceed with linking the satellite to solmans...
Hope it helps..
Br,
Sri
Award points for helpful answers

How to tell how much RAM my system can handle?

Hey everyone,
My labtop is a Compaq Presario F700 and the p/n number is KC490UA#ABA. I've been trying to see how much it can really handle. It is running Windows 7 32 bit with 2GB RAM and a 250GB HDD Drive. Also, I'm sorry if I posted this in the wrong section, I'm new to the HP forums.
Thanks!

Izanarchy wrote:
Hey everyone,
My labtop is a Compaq Presario F700 and the p/n number is KC490UA#ABA. I've been trying to see how much it can really handle. It is running Windows 7 32 bit with 2GB RAM and a 250GB HDD Drive. Also, I'm sorry if I posted this in the wrong section, I'm new to the HP forums.
Thanks!
Hi,
The max possible memory is up to 2GB of RAM according to a service guide. I believe that you can't upgrade the memory, sorry. However, there are some cases when the latest BIOS increases the maximum memory capacity with other fixes and enhancements.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

ZedBoard TANGO Control System Gateway

this is a proof of concept : accessing a minimal zynq design from TANGO distributed control system
(XUP OpenHardware 2015 Contest).
youtube video ; paper here
Download a ready to launch TangoBox here tango.vdi.zip (64 bit OS / VirtualBox required, 2.4GB)
flash zedboard qspi memory with BOOT.bin
see www.tango-control.org for more info on TANGO
Tango is a free, open source, distributed, scalable, efficient SCADA framework : a set of tools and API to monitor industrial appliance of any kinds...
Tango control system was elaborated at the ESRF, a large synchrotron radiation facility in Grenoble, France. The ESRF is a large research laboratory (1500 engineers, researchers, ), a kind of giant microscope to explore organic molecules or others and that uses X rays of high energy (6 GeV) issued from an 850 meters circumference accelerator in more than 40 beams lines operating simultaneously.
Tango Control System is a 100 man/years middleware, which aims at the monitoring 24/7 of more than 200 000 sensors & actuators in the facility. It features among other usage : logging, events driven communication, seamless integration to NI Labview, Matlab, Igor scientific toolboxes or OPC-UA plc, EPICS bus, ...
The SKA Telescope (square kilometre array telescope in southAfrica/Australia) will use TANGO.
But Tango can also fit in a raspberry pi or in a zynq SoC !
this is essentially an openembedded custom built.
thank you for reading

updated link to tango.vdi.zip (preconfigured ubuntu 64b vdi 1.4G) :
http://dl.free.fr/dWfRMq6Xe

Manual Budget Planning with Budget Control System

Hi Friends,
The below scenario i have found in Periodic/Closing Operations:
What is the purpose of Manual Budget Planning with Budget Control System
Can anybody provide the link or document with configuration for above scenario
Thanks
Venkat
Edited by: venkata raju khottari on Feb 14, 2009 2:52 PM

Dear venkata raju khottari,
Budget control is one part of Project System. Normally we have two types of Budgets one Budget for CAPEX and Budget for Over Head expnes. Max companies PS will take care by the Budgets. If u need any information let me know.
thanqu
raj

How can i find the appreciate XI content: Control System - SAP ERP?

Hi all,
I'm try to find an XI Content for Control System (Insite is our Control System) - SAP ERP. I don't know if it exist an XI Content Control System (Insite) - SAP ERP? If this XI Content is exist, how can i find it and the document about this XI Content?
If anyone do or did an integration scenario between Control System - SAP ERP and know the appreciate XI Content for this scenario, could you please help me?
Thanks a lot in advance,
Vinh Vo

hi
check whether the content is available in SMP
https://service.sap.com/swdc -> Content
The XI content details can be found here.
rgds,
Arun

How to integrate ADF with ADE Source control system?

We are going to set up a team with ADF developers and we're totally new to ADF environment. The developers will be working on individual and common Applications/ projects. We're planning to use ADE as our source control system. How do we set up Jdev/ADF environment so that we can use Oracle ADE source control system to sync up all the changes by the developers. any ideas and pointers to the documents are appreciated.
Regards,
Surya

Shay, I heard from many oracle employees saying that ADE works great with JDev. Why not outside of oracle like svn? As you know there are tons of complaints about svn & cvs. Thanks.

Safari can't establish secure connection in parental controls managed user account

Hi,
Safari can't establish any secure connection in parental controls managed user account. Normal web sites open OK, but secure connections, like Gmail which requires https doesn't work. This is what I get instead:
Safari can’t open the page “https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false& continue=http%3A%2F%2Fmail.google.com%2Fmail%2F%3Fui%3Dhtml%26zy%3Dl&bsv=llya694 le36z&scc=1&ltmpl=default&ltmplcache=2&from=login” because Safari can’t establish a secure connection to the server “www.google.com”.
Any ideas how to overcome this?

Do you have anti virus software installed, or Peer Guardian?
"https note: For websites that use SSL encryption (the URL will usually begin with https), the Internet content filter is unable to examine the encrypted content of the page. For this reason, encrypted websites must be explicitly allowed using the Always Allow list. Encrypted websites that are not on the Always Allow list will be blocked by the automatic Internet content filter."
From here:
Mac OS X v10.5, 10.6: About the Parental Controls Internet content filter

Can i use NI-7358 to implement a hybrid position force/torque control system?

Hello!
I have a manipulator with 5 joints. I will use the NI-7358 motion control card to control them. In my application i also want to implement a force control system by using a force/torque sensor.
Question:
Is it possible to use the NI-7358 to implement a force/torque control system? Can i use the analog input channel of the NI-7358 as the force feedback? How is the torque exactly controlled with this card? Do I need buy other hardware to realize the hybrid force/position control?
Thanks a lot!
WLAN

wlan wrote:
thank you Jochen, i have two ways to get the torque values for each axis: 1. by using a force-sensor on each axis. (direct, very precise) 2. by using the Jacobian of my manipulator structure to calculate the torques (indirect, not precise, maybe correction needed) do u mean i must use option "1" as feedback (hardware dependent)? (JK:
yes, that's the only option with the 7358. The other option will
require the use of another approch like LV RT or LV FPGA as discussed
before) how can i increase or reduce the torque when i use the force-feedback and the NI PCI-7358? (JK:
please refer to the document about analog feedback that I have attached
to my first answer. With analog feedback you can set torque values
exactly the same way as you set target positions).
still a question: the motors that i am using are: Motor: 3x Faulhaber 3564 024B DC-Servomotor 2x
Faulhaber 2036 012B DC-Servomotor Encoder: 1x HEDM 5500 B14 can i use the Faulhaber BLD 5606 http://www.faulhaber.de/zip_pdf/produkte/kat_2000/10_steuerungen/dBLD5603_06.pdf Motor Driver with the NI PCI-7358 together (with UMI)?
(JK:
The PDF doesn't contain a schematic of the pinout but telling from the
table this combination should work. Please make sure that you limit the
output voltage of the 7358 to +-5 V as this is the voltage input range
for the command input of the BLD 5606. This can be done in MAX)
Can u take a look? Thanks for your help! WLAN

Can Wireless Control System Send Alarms As Traps to a trap receiver

Can the Cisco Wireless Control System be configured to send its alarms as SNMP traps to a specified trap receiver ? if so how is that capability configured ? is it thru Notification Receiver ?

Yes, it can. And yes through the Notification Reciever. Pity though, it can only send traps in regards to Guest Account Activity such as guest association and authentication.
Hopefully future versions of WCS will be more versatile in that regard.
Cheers

I have edited photos in i-photo and would like to have them printed. How do i burn them to disc in a format that a windows PC system can read. I am in India and this is definitely "microsoft" country! thanks for taking the time to guide me.

I have edited photos in i-photo and would like to have them printed at any photo development lab. I am in India and this is definitely "microsoft" country !
Please advise me how to burn these edited photos to a disc to take to the nearest printing store in a format that "windows" system can understand.
Thanks in advance. I look forward to learning about this.

Select the pics in the viPhoto Window and go File -> Export and export them to a folder on the desktop. Burn that to disk with the Finder's burn command. Result. A disk with a folder of images that any machine can understand.
Regards
TD

How many system can i download to my mac pro?

how many system can i download to my mac pro?

siren7400 wrote:
...I'd like to load OS 9 onto my Mac Mini and still have the option of using the already loaded OS X. Is this possible on this machine?...
Very likely your best chance of managing that would be to use the software and instructions found here.

How DCS (Distributed Control System) can be establish to PP-PI

Similar Messages

Maybe you are looking for