How deactivate SAP* after inital logon and creation of new users

Pl help me to deactivate SAP* after inital logon and creation of new users.
Regards
Jyotirmoy

Hi,
log on (as sap* to the portal) and navigate to system administration --> system configuration --> user management configuration --> data sources.
There you should find a dialog for (de-)activating sap*.
note that the navigation path could be slightly different (my portal ist set to german, so I translated the path on my own).
Regards,
Dominik

Similar Messages

Replicate in the Master controller and creation of new user with cisco prime infrastructure 2.1.

Hello!!
We have multiple controllers Cisco WLC 5508 (all running software version 7.6.120.0) distributed in various buildings and a controller in other control building (also Cisco WLC 7.6.120.0 5508) operating as Master and backup of the buildings's controllers .
Each building is radiated such an SSID that is used as a validation of the user connected to that SSID web portal each controller (in the WLAN, Security -> Layer 3 -> Web Policy), using the local database to validate the user.
The problem is that the local database of users is not being replicated between controllers buildings and the Master controller, so if you drop the controller of a building, the Master controller begins to provide service to the buildings access points, but the equivalent radiated SSID cannot able to validate users.
I need know if it's possible through Cisco Prime Infrastruture 2.1, first replicate in the Master controller on the basis of existing controllers buildings each local data and, second, that the creation of new users are automatically perform both the controllers like to the Master .
Thanks.

As noted earlier, it is not advisable to use the root user to log in for normal use. New users and groups can be created by navigating to Administration > Users, Roles & AAA as shown in the preceding figures. It would help to chalk out what are the various levels at which you want to distribute the users, and to create those roles first. It doesn’t really matter whether you create users or groups first. New users can be easily added by going to Administration > Users, Roles & AAA > Users > Add Users > Select “Add Users” from the drop-down on the right side. Once you get into the add user workflow, fill in the username, password, and local authorization for this user as shown in the figure below.
A virtual domain can also be assigned to the users when you define their roles by selecting the virtual domain on the left side and moving it to the right side as shown in the image below (left).

The user acct my apple was connected to no longer works (corrupt). My Apple TV is still synced to that account and all of my recent purchases are going to that username. Does anyone know how to get all of the purchased items back and to the new user?

The user profile my appleTV was synced on my computer to no longer works (corrupt). My Apple TV is still synced to that profile and all of my recent purchases are going to that username. Does anyone know how to get all of the purchased items back and to the new user (same computer)? I created a new user on my computer and moved the itunes folder to the desktop but never changed the path to which the apple synced to. Now I can only see old items I purchased before the user profile went bad. PLease help!

Welcome to the Apple Community.
Changing the library the Apple TV is synced with will delete all synced content from the Apple TV, but it won't delete purchased content.
You should be able to change the library, resync any content you want and transfer your purchases back to the new library.

How do I transfer imovie projects and events to new mac from external hard drive

bought a macbook pro retina. backed up 3yr old macbook pro to external hard drive. how do I transfer imovie projects and events to new mac? thanks!

Hi dalbatross,
Welcome to the Support Communities!
Did you set up your new computer by creating a Time Machine backup and restoring from it?
If so, the Events and Projects that were on your internal Macintosh HD would copied to your new computer.
Here is another way to copy the events & projects to the new computer from the external drive:
iMovie Help: Work with multiple libraries
http://help.apple.com/imovie/mac/10.0/#mov3fa25bae7
Copy or move projects, events, or clips between libraries or hard disks
Connect a hard disk that contains the target library to your computer, or copy the target library to your computer.
Choose File > Open Library, and choose an option from the submenu.You can choose from recently opened libraries at the top of the submenu, locate an existing library on your computer, or create a new library.
The selected library is opened in the Libraries list, with the first event selected and its contents displayed in the browser.
In the Libraries list, select the event that contains the item you want to move or copy.
In the browser, select the item you want to move or copy.Note: To select multiple items, hold down the Command key as you click the items you want to select, or drag a selection rectangle around the items.
Do one of the following:
To move items between events or libraries: Drag the clip or project to another event or library.
To copy items between events or libraries: Option-drag the clip or project to another event or library by first starting to drag and then holding down the Option key as you drag.
Cheers,
- Judy

How to mass copy old rating and weightage to new appraisal documents in OSA

Hello experts,
As a part of annual appraisal process, we have incorporated some new logics in terms of rating calculation and elements in the same templates. But those logics are not being copied in already triggered documents whose goals/objects are approved by manager during mid year.
Now we are planning to trigger new documents for all those employees, but can any one suggest how to copy those approved goals and objectives in new documents? As my client doesnot want to go through the goal setting process again .
Please suggest if any BADI or ABAP program we can use for the same.
Regards
Tandrima

implement a fix enhancement (HRHAP00_ENHANCE_FIX) to add the old approved elements to the new document. And tehn have value determinations (HRHAP00_VAL_DET) to fill these added elements with the correct content.
Regards and Groetjes,
Maurice Hagen

I bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
See the Activation Lock FAQ for what you and they need to know.

TS1538 I have just purchased an iPhone5 and created a new user instead of using my previous ID. How can I access my previous data?

I have just purchased an iPhone5 and created a new user instead of using my iPhone3 ID. How can I access my previous data?

don't just sign out!
if you simply sign out, the stuff you recently purchased will be an issue in the future when an update comes out for apps or anything else. restore the device as new from itunes then restore from a back if you have one as stated above...or set up as new and use correct apple id. this will ensure you will be using the apple id that you used originally without issues from the new one.

I've already restarted my computer and created a new user, but my IPhone 4 still isn't coming out of the "restore" setting; anybody know how?

I've recently tried to restore my IPhone4. For some reason, its not working properly (i.e my phone won't come out of restore). I've already restarted my computer, and created a new user account on my computer.The message that keeps popping up says Error 1604 which i know has somethign to do with the USB port but i don't know what specifically. Any Help??

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

How to Define Workbook / Business Ares Security Correctly for new Users

Hi All,
Please could you help me understand the Security Model for Workbooks and business Areas as I believe I am very close to understanding it, but missing something important.
Background Information:
We are using the predefined Oracle Business Areas (Payables, Receivables, Purchasing & General Ledger) to build our reports on. These are the steps I am taking to try and assign a new user & responsibility access to the existing report.
1. I create the Report in Discoverer Desktop under the General Ledger Responsibility logged in as myself assume report name = Report_1.
2. I create a new Responsibility in Oracle Apps called Discoverer Resource Coordinators.
3. I create a new User in Oracle Apps called Joe Bloggs and assign the responsibility Discoverer Resource Coordinators to the Joe.
4. Logged in as myself in Discoverer Desktop, Responsibility General Ledger I Share the Report (Report_1) to the new Responsibility I just created Discoverer Resource Coordinators.
5. In Discoverer Administration, Security, I assign the new Responsibility Discoverer Resource Coordinators to the predefined Oracle Business Areas (Payables, Receivables, Purchasing & General Ledger).
6. In Discoverer Administration I set privileges so that the Responsibility Discoverer Resource Coordinators can do all tasks, query data, administer. .etc. etc..
7. I therefore believe everything has been done and attempt to Login and run the report under Joe Bloggs, but am unable to retrieve any data.
Help what am I missing!
Thanks,
Lance
Message was edited by:
Lance

Dear All,
This has now been adjusted according to your recommendations but to no avail.
Myself and Lance have ensured that this new responsibility has unlimited access to all the existing Business areas to eliminate joins within folders not being recognised, we have also ensured that the workbooks that have been created are shared with the correct responsibility.
I have thoroughly tested this set up by logging in as this new responsibility within Disco. Client to try and retrieve data in a new Workbook, but even for the simplest of queries this fails.
It seems that there may be a problem with the Responsibility linking to the EUL, could this be due to the new responsibility being created after the Current EUL was set up?
Does anyone have any information or knowledge where this could happen?
Regards
Si

How do you change an used ipad to a new user with a new itunes account?

How do you cange a used ipad to a new user with a new itunes account?

plug your ipad to your computer, open your itunes, click on the ipad icon, at the first page there is an option to "restore" ipad to its factory settings, click it. Don't remove USB connection, wait until it finishes wiping the data and it should place a new window that asks you to register the ipad.
There you go, your iPad is sync with your itunes account under your name, its best to also use "Find my iPad" just in case it gets lost, you can track it from your computer. Very handy tool and its free!
But if you want the data that is in the iPad, back up it first and sync the content to your library before restoring it to its factory settings
Have a great day and enjoy your iPad

Since upgrading to 11.1 my Itunes freezes in Windows 7 64 bit what can I do to fix this? I have uninstalled and reinstalled and tried a new user account and tried changing my settings

Since upgrading to 11.1 ITunes keeps freezing, I have windows 7 64 bit. I have tried opening in safe mode and creating a new user, I have also uninstalled and reinstalled. What can I do to fix this? Its very frustrating.

Hey pbonnett!
Here is an article that will help you troubleshoot these issues with iTunes on your Windows computer:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
-Braden

My friend gave his Macbook pro to me a month ago but he forgot his password. I want to log him out and creat a new user account of myself.

my friend gave his Macbook pro to me a month ago but he forgot his password. I want to log him out and creat a new user account of myself.

Did your friend also provided you with the original DVDs that came with the MacBook Pro?

How do I eliminate the use and creation of big files in the profile - places.sqlite, urlclassifier3.sqlite, places.sqlite-wal?

I want to eliminate the use and creation of big files in the profile - places.sqlite (10MB), urlclassifier3.sqlite (5MB), places.sqlite-wal (1MB)?
Ffor urlclassifier, I tried disabling safebrowsing options (in security menu or in about:config), but file remains. Also if deleted it is still re-created with 5 MB.

Start at http://www.mozilla.com and download the latest
version. '''At the completion of the download don't let the setup start Firefox for you, when the setup ends, start Firefox in your normal manner this way you will be less likely to create a new profile.'''
The extra startup pages are temporary -- read them. The next time
Firefox comes up you should be back to starting with your normal home page.
'''Note: Firefox must be down once the install starts. '''
Close Firefox with File>Exit. Then make sure Firefox is not running --
On Windows: check the "Processes" tab in the Windows Task Manager.
'''On Mac: Firefox > Quit then Command+option+Esc, if Firefox running use Force quit'''
Permission errors on Mac:
'''If you were getting permission errors on a Mac, download the latest
Firefox version, then uninstall and reinstall Firefox. Do not remove
your profile directories and files as they contain your settings,
bookmarks, history, extensions, passwords, and cookies.'''
in any case once you are on 4.0 you might want to take a look at "(fx4)"
* Fx4: Firefox 4.0 Problems and Orientation (#fx4) <br>http://dmcritchie.mvps.org/firefox/firefox-problems#fx4

HT1918 i can not change the address from USA to Canada so i live in Canada now How can i do that? or if i can not change How can i delete an account and make the new account by use the same email address?

because i can not use the Canadian card to redeem in my account from USA. should i delete an account and create the new one that should valid in Canada by using the same email address? or what should i do? (i really want to use my recent email)

Hi Kazmania89,
Welcome to the Support Communities!
If you require additional assistance with this, click on the link below for guidance:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Once you are able to gain access to the old Apple ID, this article may be helpful:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device? 
First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
Mac: iTunes for Mac: How to copy purchases between computers
PC: iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch.
Cheers,
- Judy

How do I download current music and apps to new ipod touch from old ipod touch?

My daughter is getting a new IPod Touch and we aren't sure how to transfer all the apps and music to the new one. Does it download easily from her account when she registers the new IPod. We don't want to have to buy everything all over again.
Thanks!

You can sync as many ipods as you like to one computer.
Plug in the new one and sync whatever you lime to it.
Everything that is on the old ipod should be on your computer.

How deactivate SAP* after inital logon and creation of new users

Similar Messages

Maybe you are looking for