How debug a routine created in InfoPackage for Data selection ?
Hi everybody,
I decide to debug a routine create in InfoPackage.
Here, the name of my ABAP routine:
program conversion_routine
form compute_TREATMENT_DATE
When i execute the "/h" command to launch debugger, i don't see this routine in Call Stack...
How i can debbug ?
Any suggestions ?
Thanks in advance,
Best regards,
Rodolphe.
Debug ABAP Routine in InfoPackage:
Put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
And when run infopackage, go to sm50.
On that process, menu program->debug program.
In debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps...
Similar Messages
-
How debug a routine create in InfoPackage for Data selection ?
Hi everybody,
I decide to debug a routine create in InfoPackage.
Here, the name of my ABAP routine:
program conversion_routine
form compute_TREATMENT_DATE
When i execute the "/h" command to launch debugger, i don't see this routine in Call Stack...
How i can debbug ?
Any suggestions ?
Thanks in advance,
Best regards,
Rodolphe.Debug ABAP Routine in InfoPackage:
Put a loop on the routine,
data : debug(1).
do.
if debug = 'X'.
exit.
endif.
enddo.
And when run infopackage, go to sm50.
On that process, menu program->debug program.
In debug screen, type in debug, and fill with X and click 'edit'-pencil icon.
F5 to next step.
hope this helps... -
ABAP routine in the infopackage for Multiple Selection
Hi experts,
I want to include a abap routine in the infopackage for Multiple Selection so that I can fetch only the required Material Numbers when the InfoPackage is schedule. As I have the constraints that I have to select certain Material Numbers only, that are not in series - so I cannot select"BT' fuction. Tell me what ABAP Code will work in this scenario.
Kind regards,
Rajesh GiribuwaHi,
The Routine will have to use 'EQ' operator and Append each selections to the Structure.
ABAP Routine
InfoPackage definition for Bespoke SIS Structure
Infopackage routine !
Regards
Happy Tony -
Rotuine in Infopackage for Data Selection---- Urgent
Hi All,
I have a requirement such that i need to select only balnk Values from cube and send it to another cube .
lets say that in CUBE A is the one cube from which i need to extract the data and send it to CUBE B.(data mart).
In CUBE A , I have field Plant , for this field in CUBE A there are values for it and also with no value i.e ' ' (space).
Now my requirement is I need to extract the data from CUBE A for only those records for the field Plant value is ' ' (blank/space).
For this if we give in the infopackage selection if you give space , it is getting all the records.. and If you go for f4 and select Filter symbol and give single value as ' ' (Space or blank) it is taking as value # , but with zero records.
And one more way is writing a Routine for the data selection..
Can anybody guide me how to write a routine for that or send me the code for the above purpose.
As it is a matter of urgency please help me guys.
mail me to [email protected]hi,
I have an idea, I do not know will it works. I based on Pradeep code:
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'Zfield'.
l_idx = sy-tabix.
l_t_range-SIGN = 'I'.
l_t_range-OPTION = 'NE'.
l_t_range-low = 'A'.
l_t_range-high = 'ZZZZZZZZZZZZZZ'.
modify l_t_range index l_idx.
p_subrc = 0.
Idea is to exclude all posible strings so maybe l_t_range-high should be '99999999999'. I do not know lenght of your plant characteristic as well so remember about this
Regards,
Andrzej -
Popup window for data selection in maintenance view
Hi,
How to create popup window for data selection in maintenance view. For example when you go to view v_t510 in se16, there you will see a popup window to enter values. after you enter the values in that window, then data related to those values that you entered in the popup window will displayed.
How can we do that for the custom maintenance view?
Thanks in advance for your help guys.
Regards,
Srinivas.In your custom maintainace view, if you select the Data browser / Table view maintainace under the tab "Maint Status" as "Dispaly maintanence allowed with restriction" than system will give you popup to restrict by selection.
Regards,
Naimesh Patel -
How to creat the infopackage for RDA?
Hi all;
How to creat the infopackage for RDA?Hi,
Check in
Real time infopackage
Re: Types od DTP and their uses in BI 7.0
Re: Real-Time Data Acquisition
Thanks
Reddy -
To create one infopackage for two cubes
hi all
iam new to bw and have a problem ,how to create an infopackage for two infocubes and load data into them.Thanks in advanceSrinivas:
I believe you are working in BW 3.5, then in the Infopackage select the tab :"Data targets" and select the radial buttom "update in all data targets for which update rules exist". Surely, if there are no update rules you will not be able to load data.
Regards
RAP -
Abap Routine for Date selection in Infopackage
Hi
I have to write an abap routine for date selections in the infopackage,
There are two date begda and enda.
Do i code for BEGDA and fill in the begin date using routine and use another routine to fill the ENDA.
JPJPHi JP,
If you have two info objects BEGDA and ENDA in the Info package for selection
then you will have to write seperate routine for each of them.
If you want to give single value for each date field then update only the field l_t_range- low otherwise if you want to give range then you can update the internal table fields l_t_range-low and l_t_range-high .
Regards,
Prakash -
How to populate the ranges using FM for the SELECTs
Hi,
I am still working on the FM to create a generic extractor. I went through the debugger but I am still unable to determine how the ranges are populated. RSA3 always gives me zero values for the results.
There is a RANGE statement in the sample FM and the following statements for SELECTs
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
and...
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
APPEND L_R_CARRID.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
APPEND L_R_CONNID.
ENDLOOP.
My question is how is L_R_CONNID and L_R_CARRID populated with low and high values for the SELECT statements? I tried to find the DS 0SAPI_SFLIGHT_SIMPLE to run and see how it is set up but there is no such DS.
Would someone take the time to say something about this in several sentences? I have my own code and it seems that it is not populating the values for the SELECTs when I debug from RSA3 when I provide the low and high values.
Would I normally populate the low and high values from the InfoPackage 'Data Selection' tab once I have implemented in BW or ready to test in BW? That would mean I have to choose those fields as selections from RSO2. Anyway, I think I have asked about this but I am hoping to get an answer to get this going...
Appreciate any replies.Hi
Here is an example of an extractor that uses
both method's, if the InfoPackage selection exist's
it overrides the TVARV selection (which is the default).
FUNCTION ZBW_TC_FORECAST_SO_EXTRACTOR.
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*" VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*" VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*" VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*" VALUE(I_PRIVATE_MODE) OPTIONAL
*" VALUE(I_CALLMODE) TYPE ROARCHD200-CALLMODE OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZBW_TC_FORECASTING_EXT_STR OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
*" HIERARCHY_NOT_FOUND
Change History *
Mod. # | Date | Developer | Description *
*RD3K915762|06/21/2005| SRangaraj | Change selection of open SO *
| | | data to include deleted matls *
| | | and obsolete items too *
RD3K915888|06/29/2005| SRANGARAJ | Add ext matl grp and lab offce
| | | filters for data-selection *
The input parameter I_DATAPAKID is not supported yet !
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SBIWA_S_SELECT.
Maximum number of lines for DB table
STATICS L_MAXSIZE TYPE SBIWA_S_INTERFACE-MAXSIZE.
Parameter I_PRIVATE_MODE:
Some applications might want to use this function module for other
purposes as well (e.g. data supply for OLTP reporting tools). If the
processing logic has to be different in this case, use the optional
parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
(I_PRIVATE_MODE = X).
If the message handling has to be different as well, define Your own
messaging macro which interprets parameter I_PRIVATE_MODE. When
called by BIW, it should use the LOG_WRITE macro, otherwise do what
You want.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
buffer input parameters
prepare data selection
The input parameter I_DATAPAKID is not supported yet !
Invalid second initialization call -> error exit
IF NOT G_FLAG_INTERFACE_INITIALIZED IS INITIAL.
IF 1 = 2. MESSAGE E008(R3). ENDIF.
LOG_WRITE 'E' "message type
'R3' "message class
'008' "message number
' ' "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDIF.
Check InfoSource validity
CASE I_DSOURCE.
WHEN 'ZBW_TC_SO_EXTRACT'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
Check for supported update mode
CASE I_UPDMODE.
WHEN 'F'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E011(R3). ENDIF.
LOG_WRITE 'E' "message type
'R3' "message class
'011' "message number
I_UPDMODE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
Check for obligatory selection criteria
READ TABLE I_T_SELECT INTO L_S_SELECT WITH KEY FIELDNM = 'PGMID'.
IF SY-SUBRC <> 0.
IF 1 = 2. MESSAGE E010(R3). ENDIF.
LOG_WRITE 'E' "message type
'R3' "message class
'010' "message number
'PGMID' "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDIF.
APPEND LINES OF I_T_SELECT TO G_T_SELECT.
Fill parameter buffer for data extraction calls
G_S_INTERFACE-REQUNR = I_REQUNR.
G_S_INTERFACE-ISOURCE = I_DSOURCE.
G_S_INTERFACE-MAXSIZE = I_MAXSIZE.
G_S_INTERFACE-INITFLAG = I_INITFLAG.
G_S_INTERFACE-UPDMODE = I_UPDMODE.
G_S_INTERFACE-DATAPAKID = I_DATAPAKID.
G_FLAG_INTERFACE_INITIALIZED = SBIWA_C_FLAG_ON.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF I_T_FIELDS TO G_T_FIELDS.
Fill range tables for fixed InfoSources. In the case of generated
InfoSources, the usage of a dynamical SELECT statement might be
more reasonable. BIW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT G_T_SELECT INTO L_S_SELECT.
CASE L_S_SELECT-FIELDNM.
WHEN 'PRDHA'.
WGF_PRDHA_LENGTH = STRLEN( L_S_SELECT-LOW ).
IF WGF_PRDHA_LENGTH = 6. "PARTIAL PRDHA
WGF_PRDHA = L_S_SELECT-LOW.
CONCATENATE WGF_PRDHA '%' INTO WGF_PRDHA.
ELSEIF WGF_PRDHA_LENGTH = 12. "FULL PRDHA
MOVE-CORRESPONDING L_S_SELECT TO L_R_PRDHA.
APPEND L_R_PRDHA.
ENDIF.
WHEN 'MATKL'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_MATKL.
APPEND L_R_MATKL.
ENDCASE.
ENDLOOP.
reset the index of where we are in the gt_header table
g_tabix = 0.
perform populate_default_variables.
perform get_data.
perform build_detail.
EXIT.
ENDIF. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF G_COUNTER_DATAPAKID = 0.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between InfoSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
DESCRIBE TABLE LT_DATA LINES l_count.
IF g_tabix GE l_count.
RAISE no_more_data.
ENDIF.
*CLEAN UP THE OUTPUT TABLE
refresh E_T_DATA.
LOOP AT LT_DATA FROM G_TABIX INTO LS_DATA.
APPEND LS_DATA TO E_T_DATA.
Set global counter
g_tabix = g_tabix + 1.
ENDLOOP.
G_COUNTER_DATAPAKID = G_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
Forms
***INCLUDE LZBW_TC_FORECAST_SO_EXTF01 .
*& Form populate_default_variables
text
--> p1 text
<-- p2 text
FORM populate_default_variables.
data: wlf_name like tvarv-name.
clear: R_prdh3[], wlf_name.
*get the exclusion range from tvarv for the product hierarchy in
*question
concatenate 'ZBW_EXL_' WGF_PRDHA(6) INTO WLF_NAME.
SELECT LOW FROM TVARV INTO R_prdh3-low WHERE
NAME = WLF_NAME.
move: 'I' to R_prdh3-sign,
'EQ' to R_prdh3-option.
append R_prdh3.
clear R_prdh3.
ENDSELECT.
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
CLEAR L_R_LABOR[].
SELECT LOW FROM TVARV INTO L_R_LABOR-Low WHERE
NAME = 'ZBW_TC_FORECAST_LAB_OFF'.
move: 'I' to L_R_LABOR-sign,
'EQ' to L_R_LABOR-option.
append L_R_LABOR.
clear L_R_LABOR.
ENDSELECT.
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
ENDFORM. " populate_default_variables
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data.
data: wlf_lmeng like vbep-lmeng.
*get all deliveries for date range for either a range of product hrchy
*or a like value
refresh int_records1.
if wgf_prdha ne space.
select ivbeln iposnr iKLMENG jvkorg i~werks
imatnr imeins mprdha mmatkl
from vbap as i
INNER JOIN VBAK AS j
ON ( jvbeln = ivbeln
and j~vbtyp = 'C' )
INNER JOIN vbuk AS k
ON ( kvbeln = ivbeln
and k~lfgsk <> 'C'
and k~gbstk <> 'C' )
INNER JOIN vbup AS l
ON ( lvbeln = ivbeln and
lposnr = iposnr
and l~lfgsa <> 'C'
and l~gbsta <> 'C' )
INNER JOIN mara AS m
ON ( mmatnr = imatnr
{Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
and m~lvorm eq ' '
and m~mstae ne '99'
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
and m~extwg = '080' )
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
INNER JOIN marc AS n
ON ( nmatnr = imatnr
and nwerks = iwerks
and n~lvorm eq ' ' )
}End of insert by SRangaraj on June 21, 2005 >>RD3K915762
into table int_records1 where ( i~abgru = ' '
and i~klmeng > 0
and m~prdha like wgf_prdha
and m~matkl in l_r_matkl
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
and m~labor in l_r_labor ).
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
elseif not l_r_prdha[] is initial and wgf_prdha = space.
select ivbeln iposnr iKLMENG jvkorg i~werks
imatnr imeins mprdha mmatkl
from vbap as i
INNER JOIN VBAK AS j
ON ( jvbeln = ivbeln
and j~vbtyp = 'C' )
INNER JOIN vbuk AS k
ON ( kvbeln = ivbeln
and k~lfgsk <> 'C'
and k~gbstk <> 'C' )
INNER JOIN vbup AS l
ON ( lvbeln = ivbeln and
lposnr = iposnr
and l~lfgsa <> 'C'
and l~gbsta <> 'C' )
INNER JOIN mara AS m
ON ( mmatnr = imatnr
{Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
and m~lvorm eq ' '
and m~mstae ne '99'
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
and m~extwg = '080' )
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
INNER JOIN marc AS n
ON ( nmatnr = imatnr
and nwerks = iwerks
and n~lvorm eq ' ' )
}End of insert by SRangaraj on June 21, 2005 >>RD3K915762
into table int_records1 where ( i~abgru = ' '
and i~klmeng > 0
and m~prdha in l_r_prdha
and m~matkl in l_r_matkl
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
and m~labor in l_r_labor ).
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
endif.
sort int_records1 by vbeln posnr.
delete adjacent duplicates from int_records1 comparing
vbeln posnr.
*remove unnecessary records
if not r_prdh3[] is initial.
DELETE INT_RECORDS1 WHERE PRDHA+6(3) IN r_prdh3.
endif.
*get the schedule lines for all of the above records and
*get the lowest schedule line date per so line item
if not int_records1[] is initial.
refresh int_records3.
select vbeln posnr etenr mbdat into table int_records3
from vbep for all entries in int_records1
where vbeln = int_records1-vbeln and
posnr = int_records1-posnr and
lmeng > 0.
sort int_records3 by vbeln posnr etenr mbdat ascending.
loop at int_Records1.
loop at int_records3 where vbeln = int_records1-vbeln
and posnr = int_records1-posnr.
int_records1-mbdat = int_records3-mbdat.
modify int_records1.
exit.
endloop.
endloop.
refresh int_records3. free int_records3.
refresh int_records2.
*get the deliveries and calculate the open quantities
select vbelv posnv vbeln posnn rfmng plmin
from vbfa into table int_records2
for all entries in int_Records1
where vbelv = int_records1-vbeln
and posnv = int_records1-posnr
and VBTYP_N = 'J'. "Dels
*calculate open quantities next
loop at int_records1.
clear wlf_lmeng.
clear int_records2.
loop at int_records2 where vbelv = int_records1-vbeln
and posnv = int_records1-posnr.
case int_records2-plmin.
when '-'.
wlf_lmeng = wlf_lmeng - int_records2-rfmng.
when others. "just add
wlf_lmeng = wlf_lmeng + int_records2-rfmng.
endcase.
endloop.
int_records1-klmeng = int_records1-klmeng - wlf_lmeng.
int_records1-vbeln_dl = int_records2-vbeln.
int_records1-posnr_dl = int_records2-posnn.
modify int_records1.
endloop.
endif.
delete int_records1 where klmeng le 0.
refresh int_records2. free int_Records2.
ENDFORM. " get_data
*& Form build_detail
text
--> p1 text
<-- p2 text
FORM build_detail.
LOOP AT int_records1.
*DO INDIVIDUAL MOVES - ITS FASTER THAN MOVE-CORRESPONDING
move: int_records1-vkorg to LS_DATA-VKORG,
int_records1-werks to LS_DATA-WERKS,
int_records1-matnr to LS_DATA-MATNR,
int_records1-klmeng to LS_DATA-KLMENG,
int_records1-mbdat(6) to LS_DATA-YEARMONTH,
int_records1-meins TO LS_DATA-MEINS,
int_records1-vbeln TO LS_DATA-VGBEL,
int_records1-posnr TO LS_DATA-VGPOS,
int_records1-vbeln_dl TO LS_DATA-VBELN,
int_records1-posnr_dl TO LS_DATA-POSNR,
int_records1-mbdat to LS_DATA-WADAT_IST,
int_records1-PRDHA to LS_DATA-PRDHA,
int_records1-matkl to LS_DATA-MATKL.
APPEND LS_DATA TO LT_DATA.
clear: LS_DATA.
ENDLOOP.
ENDFORM. " build_detail -
OWB 10g -- Can't Create Database Links for Data Source and Target
We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not. -
How to put up a calendar in VI for date selection?
Hi all,
I need to put up a calendar in my VI for date selection to view historical data like we find on websites of travel agents?
& also guide me how to get this kind of calendar.....
please guide me...
Thanking You,
Vaibhav Gandhi
B.E. Instrumentation & Control,
INDIA
Solved!
Go to Solution.Thank you so much GURU for your very quick & accurate reply.
Further I need to know, that how I can remove the word 'value' from indicator? i.e. it is giving "Value -> 6/1/2009" on indicator.. I just need '6/1/2009' on indicator...
Can it be possible?
Thanks,
Vaibhav Gandhi
B.E. Instrumentation & Control,
INDIA -
Can we create serach help for a selection screen field
Can we create serach help for a selection screen field with out creating searchhelp object.
I mean is it possible to create serchelp in the program itself with some specific values i want to give.
E.g say we can define any internal table and fill it with values and using that into selection screen fields
Regards
MaveAT SELECTION-SCREEN ON VALUE-REQUEST FOR paymeth.
PERFORM PAYMENT_HELP.
FORM PAYMENT_HELP.
DATA: begin of DESCR_TAB occurs 0,
DESCR LIKE BKPF-BKTXT,
END OF DESCR_TAB.
DATA: gd_repid like sy-repid.
gd_repid = sy-repid.
DESCR_TAB-DESCR = 'aaaaa'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'bbbbb'.
append DESCR_TAB.
DESCR_TAB-DESCR = 'ccccc'.
append DESCR_TAB.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'DESCR'
DYNPPROG = gd_repid
DYNPNR = '1000'
DYNPROFIELD = 'paymeth'
VALUE_ORG = 'S'
DISPLAY = ' '
TABLES
value_tab = DESCR_TAB.
endform.
Svetlin -
How do I print a contact report for a select group?
How do I print a contact report for a select group?
You should be able to select the group instead of all contacts. Older article.
Contacts – Print Contact Information -
ORA-39080: failed to create queues "" and "" for Data Pump job
When I am running datapump expdp I receive the following error:
+++Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc+++
+++tion+++
+++With the Partitioning, OLAP and Data Mining options+++
+++ORA-31626: job does not exist+++
+++ORA-31637: cannot create job SYS_EXPORT_SCHEMA_01 for user CHESHIRE_POLICE_LOCAL+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPV$FT_INT", line 600+++
+++ORA-39080: failed to create queues "" and "" for Data Pump job+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPC$QUE_INT", line 1555+++
+++ORA-01403: no data found+++
Sys has the following two objects as invalid at present after running catproc.sql and utlrp.sql and manual compilation:
OBJECT_NAME OBJECT_TYPE
AQ$_KUPC$DATAPUMP_QUETAB_E QUEUE
SCHEDULER$_JOBQ QUEUE
While I run catdpb.sql the datapump queue table does not create:
BEGIN
dbms_aqadm.create_queue_table(queue_table => 'SYS.KUPC$DATAPUMP_QUETAB', multiple_consumers => TRUE, queue_payload_type =>'SYS.KUPC$_MESSAGE', comment => 'DataPump Queue Table', compatible=>'8.1.3');
EXCEPTION
WHEN OTHERS THEN
IF SQLCODE = -24001 THEN NULL;
ELSE RAISE;
END IF;
END;
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 7Snehashish Ghosh wrote:
When I am running datapump expdp I receive the following error:
+++Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc+++
+++tion+++
+++With the Partitioning, OLAP and Data Mining options+++
+++ORA-31626: job does not exist+++
+++ORA-31637: cannot create job SYS_EXPORT_SCHEMA_01 for user CHESHIRE_POLICE_LOCAL+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPV$FT_INT", line 600+++
+++ORA-39080: failed to create queues "" and "" for Data Pump job+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPC$QUE_INT", line 1555+++
+++ORA-01403: no data found+++
Sys has the following two objects as invalid at present after running catproc.sql and utlrp.sql and manual compilation:
OBJECT_NAME OBJECT_TYPE
AQ$_KUPC$DATAPUMP_QUETAB_E QUEUE
SCHEDULER$_JOBQ QUEUE
While I run catdpb.sql the datapump queue table does not create:
BEGIN
dbms_aqadm.create_queue_table(queue_table => 'SYS.KUPC$DATAPUMP_QUETAB', multiple_consumers => TRUE, queue_payload_type =>'SYS.KUPC$_MESSAGE', comment => 'DataPump Queue Table', compatible=>'8.1.3');does it work better when specifying an Oracle version that is from this Century; newer than V8.1? -
How to go about multiple inclination with different data selection in Delta
We have to copy large amount of data ( more than 42lak of recodes) selectivly from on ODS to other ODS. in delata load ( BW 3.5 enverioment)
I thought of loading data in slices through delta loading with selection condition.
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
Here what problem I am facing.. while doing 2nd time initialization it prompt me to delete the last initialization request form scheduler menu.
if i delete the last request .. will it take the delta for previous initialization selection and new initialization selection. ?
Please advice how to go about multiple inclination with different data selection in delta loading.
Looking forward your reply.Hi,
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
You are correct with this scenario normally. The message you mentioned normally comes up when you open a infopackage and don't change the selection first or in case you have overlapping selections with an already done init.
regards
Siggi
Maybe you are looking for
-
Hi Everybody 302016 192.168.77.20 60817 FileServer_DNS 53 Teardown UDP connection 1003725 for outside:192.168.77.20/60817 to inside:FileServer_DNS/53 I am getting this error on my asa 5505 firewall and VPN user is
-
Can I make a DISK IMAGE of the installation DVD as BackUP?
Well after a week of continuing problems, I am so glad that I had several Fully Bootable Backups on external FW800 Hard Drives to keep me alive as my internal HD has been freezing and other repairs may be needed. The ability to restart via the OPTICA
-
Material price change with variable G/L account - which function module?
Hi, do you know a function module which allows to change the material price (S or V) and accepts a cost center for the price variances that is not the one from customizing?
-
What url should be given to java developer to call wsdl deployed by XI?
Hi gurus, I generate a web service by using integration directory, and in the wsdl file there is a parameter "location", which I think can be used by java developer to call the web service. However, they think the form of url should be http://.....?w
-
Purchase Order Dunning related(purchasing remainders)
hi gurus, i configured purchase order dunning procedure,i maintained condition record MHAN ,i also taken that output in me91f ,now that remainder mail is going to vendor i.e is fine ,now my requirement is that mail as to send vendor as well as pur