How define Pricing Strategy at Distribution chain?

Hi experts!
Now in my system:
Creation Price Calculation process for each Store.
Sales price determination seq. = 03 (Use suggested price as sales price)
In each store for each Merchandise Category defined Pricing Strategy = 05 (Customer-specific determination) to use our Function module.
I need:
Creation Price Calculation at Distribution chain (1000-10) with use our Function module.
Now if I create Price Calculation our FM don't use.
Please help! What should I do?

Hi
You have to maintain the condition records based on scales.
In the condition type customisation,
1. Maintain scale basis as quantity
2. Maintain scale type as D Graduated to Interval scale
When you are maintaining condition records in VK11
in the menu Go to---Scales and maintain the values accordingly, as per the quantity
0-99 as 5
99-110 as 4 and so on
Hope this helps you
Rwd if it helps.

Similar Messages

"Distribution Chain" attached to a Sales Area - How to remove it?

Dear Gurus,
A "Distribution chain" has been assigned to my Sales Organization by my FI guy who is not here this week.
How do I remove this transaction from my sales organization?
Please advise
Regards
Chris

I assume when you say distribution chain (dc), you meant distribution channel.
If so then check the path SPRO-> Enterprise structure ->assignment ->Sales and distribution ->Set up sales area. First you need to remove the assignment here then go to Assign distribution channel to sales organization step in the same path. Here you can remove the Distribution channel from the sales org assignment.
Before removing any assignment, make sure there is no transactional data exit for this DC. If anything is existing (or in the past), then you should not remove the assignment.
Regards,

Error Message regarding define pricing procedure determination

Hi Guru:
I encountered the issue when defining pricing procedure determination,when I tried to input the sales organization,distribution channel and pricing procedure and condition type into the column,the error message popped up and said "An entry already exists with the same key" how to fix?

Dear Friend,
The error message is self-explanatory. It means that already there exits the Combination of Sales Org / Div / DC & Pricing Procedures on OVKK.
Check the existing entries in OVKK & maintain a new entry with different Combination of Sales Org / Div / DC / Doc Pricing Proc / Cust Pricing Proc.
Hope this helps...
Thanks,
Jignesh Mehta

MM02 Sales view - Create new Cross distribution chain material status

Dear Gurus,
I need to CREATE new:
- Distribution chain specific material status
- Cross distribution chain material status
Can anyone please help urgently on this?
Many thanks for your help
Kind regards
Chris

IMG > Logistics general > Material Master > Settings for Key Fields > Data Relevant to Sales and Distribution > Define Sales Statuses

Define Derivation Strategy for Control Objects - Value Not Transport

I created Rules Value in Define Derivation Strategy for Control Objects (SPRO). Then, I perform the below steps for Transport the Request to other client.
1. Select Derivation Strategy name, Table View > Transport
2. Select Request Number
3. Click Include in Request, then save
4. Go to the Steps in Logical Order, Extras > Transport
5. Select Request Number and back to SPRO screen
After SCC1, there is only Derivation Strategy Name appeared but the rules value (Steps in Logical Order) is not appeared.
How can I transport the Rule Value?
Regards
Ton

Hi,
When you are in the derivation transaction and select to transport it, the system asks you whether you want the values to be transported as well. If you choose 'yes' your change request will include this information.
Regards,
Eli

IS Retail - Distribution Chain in SD

Dear Gurus,
A "Distribution chain" has been assigned to my Sales Organization by my FI guy who is not here this week.
How do I remove this transaction from my sales organization?
Please advise
Regards
Chris

Hi Kumar,
Many thanks for your input on this. The difficulty I have is that you cannot see a Distribution Chain as such in the assignment section so I cannot delete these Dist. Channel/ Division at all. And whatever I do, they appear in the company structure that you bring out when you check the plant. There you see all the attachments and this Distribution Chain appears again...
Strange.
Why?
Regards
Chris

Differentiate Plant between Distribution Chain and Store Chain is IS-Retail

Hai guys,
I created a Distribution Center (BD01) for a Sales Org BP01, Dist Chl B1, Divn B1. Whenever I try to create an Article, I am getting this error
'Distribution Chain BP01/B1 is not a Store Distribution Chain'
The Performance Assistant gives me the following diagnosis:-
Distribution chain BP01/B2 is not a store distribution chain
Message no. MH009
Diagnosis
You wanted to maintain store logistics data for a distribution chain. However, this is only possible if the distribution chain is one for stores (as opposed to one for distribution centers).
Procedure
Specify a store distribution chain.
But when I try to change the settings of "Distribution Chain Control" in Customising of "Basic Data Retail", I am unable to make a "Store Distribution Chain". Can somebody teach me how?
IT IS URGENT
Regards,
Maheshwaran. I

Dear Maheshwaran,
Based on your condition type....you have to create Saling Price using VKP5 transaction code with purchase price and sales price determination.
Or you can upload using transaction code VK11
After this transactions, you can trigger IDoc from SAP to POS
Hope this information will be useful.
Bye,
Muralidhara

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Product is not valid for Sales org and distribution chain

Hello friends,
When i am saving the trade promotions , i am getting error message
"Product XXXX is not valid for distribution chain XXXX, XXXX"
I have maintained sales organization and distribution channel in commpr01 under sales and distribution tab.
kindly help.
Regards,
Srinivas

Hi Srinivas,
the error is raised from the trade promotion CCA check - raised from method CL_CRM_MKTGS_PD_CCA_CHECK_HDLR~CHECK. There are the following checks performed:
* There are several checks to do based on the distribtion chain
* Execute the checks and identify which products fail which check
1. *   Determine if the product passes the distribution chain check
2. *   Determine if the product category 1 of the product assignment
   *   passes the product category check
3. *   Determine if the product category 2 of the product assignment
   *   passes the product category check
4. *   Determine if the product group of the product assignment
   *   passes the product group check
5. *   Determine if the sales status of the product is set to blocked
You may also need to check the sales and distribution data of the product category or product group of the mentioned product, if this is assigned to any.
best regards,
Johannes

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

How to create document in process chain

Hi,
can u plz tell me how to create document in process chain and wat i need to edit the text for particular info package when document.

Hi Anil,
Goto Tcode:RSPC and select your load data process type where you have to right click on the process chain and select Select create message,there are three types of messages
1>Successful
2>Error
3>Always
If you already created message then go to maintain message
Where you have two buttons
1>is for Edit Document
2>Maintain Recpiants
Goto Edit Document and put your comment and set their mail address in Mail recipiants.
Note there are 2 types of messages you can kept at execution of infopackage process type.
If load is successful send the mesaage to recipients
If load is failed send the message to mail recipt.
It would help you.

Explain: how to include Infospoke in Process Chain where destination is DB

Explain: how to include Infospoke in Process Chain where destination is local machine database [NOT Flatfile]

Hi vijay,
First you create an Infospoke with destination as a DB table in your local BI or BW Machine. Now add this infospoke by going through below steps.
1. Call up the process chain maintenance. Choose This graphic is explained in the accompanying text Process Chain Maintenance from the Administrator Workbench toolbar. The Process Chain Maintenance Planning View screen appears.
2. In the left-hand screen area of the required This graphic is explained in the accompanying text display component, navigate to the process chain in which you want to insert your InfoSpoke. Double-click to select it. The system displays the process chain plan view in the right-hand side of the screen.
If no suitable process chain is available, you need to create a new process chain. You can find additional information under Creating a Process Chain.
3. To insert a process for extraction by means of an InfoSpoke, choose This graphic is explained in the accompanying text Process Types in the left-hand area of the screen. The system now displays the process categories available.
4.In the process category Loading Process and Post Processing, choose the application process type This graphic is explained in the accompanying text Data Export into External Systems.
5.Insert the Data Export into External Systems application type with Drag&Drop into the process chain. The dialog box for inserting a process variant appears.
6.In the Process Variant field, enter the name of the InfoSpoke that you want to include in the process chain, or select it by means of the input help.
Once You have added the infospoke you have to write a program which will fetch the database table that you filled and transfer the data fetched to other legacy system with the help of XI System
For more information on how to infospoke on 3rd party pls find the link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
Hope this help
Harish

How to connect processes in Process chain

Hi,
How to connect processes in Process chain.
how to make it as black,green,red.
Thanks,
Madhu.

Hi,
u can connect first process in a Process chain to second, just click on first process and drag and drop onto second one.
3 options will appear:
1. succesfull---green line
2. unsuccesfull----red line
3. always-----black.
select one option then linked will be formed.
green line means the second process will be executed if and only if first process ran successfully.
red line means the second process will be executed if and only if first process ran unsuccessfully.
black line means line means the second process will be executed even if first process ran successfully or unsuccesfully.
bye.
"assign points if info. is helpful"
Narendra reddy.

How can I find corresponding meta chain in RSPC

Hello Gurus,
I have a local process chain, how can I find corresponding meta chain in RSPC? and also I have already created a process chain, How can I changed the name of this process chain?
Many thanks,

Hi,
Basically all chains are same, but if you click on Start it will goto Start Process Screen there you can find Scheduling Options, in that Direct Scheduling is selected so it is Main Chain (Meta Chain), if it is Starting using Meta Chain API is selected then it is local chain in that meta chain.
Note: Basicall all Chains are same based on above differnecce you can find it.
By Looking at Chain we can decide it is it Meta chain or Norma Chain, if you open RSPC and then Open any Chain If it is having
Start-->Local , then it is Meta Chain and Local is Norma Chain.
Thanks
Reddy

Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

The new Business Volume Purchase Program is pretty interesting...it can be used to centrally purchase and distribute paid ( not free) items from the AppStore. We are getting setup to use it. You can keep an eye on licenses etc. You can also use a single centralized form of payment.
http://www.apple.com/business/vpp/

How define Pricing Strategy at Distribution chain?

Similar Messages

Maybe you are looking for