How deploying client settins and doing client push relate

Hello all,
This is going to be kind of a silly question. I am in the process of deploying the sccm client to a group of computers and servers using client push.
 I also know I would like to create a custom client settings. I am 
trying to figure out the mechanics of how they work together / and related.
I know you can deploy the client settings manually but what does the client settings have to do with the installed sccm client?
Should I deploy the sccm client and then the custom client settings?
Phil Balderos

It doesn't matter which you do first, because the client settings can only be applied when there is a client installed.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Thanks Peter this is what I was trying to wrap my big head around.
Phil Balderos

Similar Messages

  • How do elements organizer and adobe photoshop elements relate? Unclear how/where to save edited photos

    I don't understand how elements organizer and adobe photoshop elements relate - how/where do I save edited photos?  I tried to save them on my hard drive and the result was a 65 MB file!!!  Not sure what I'm doing wrong :/ - maybe I'm saving the entire folder every time instead of just an individual photo?

    There is no standard field for faces. To transfer information you must put it in the standard place that the new program will use. That does not exist for faces. One work around would be to use keywords. You include the available metadata in a photo by checking all if the boxes when you export the photo(s). What the receiving program is determined by the authors of that program. All iPhoto can do is write what it offers to the IPTC & EXIF fields which it will
    LN

  • My iphone 4 screen is shacking uncontrollably, I have the iOS 7.0.4 and it started not to long after I updated it and I was wondering how do I fix and do I have to pay money to fix it?

    My iphone 4 screen is shacking uncontrollably
    I have iOS 7.0.4 and I was wondering how do I fix and does it cost money to fix it?

    I don't know what "shacking" is, but make a Genius Bar appointment at your nearest Apple Store. An out-of-warranty replacement is $149 USD.

  • Client push deployment and CU / hotfix install

    I'm trying to figure out a way to do a push install of the 2012 client, CU update, and hotfixes all in one go.  I know using the ClientPatch folder method is not supported, but I'm wondering if another way would work.
    1) When you do a client push install from the console, does it use BITS?
    2) Does it directly use the files in Program Files\Microsoft Configuration Manager\Client on the site server, or the SCCM client package?
    3) Could you create a Hotfixes folder under the Client folder, put the CU / hotfixes in there, then use the PATCHES property to point to C:\Windows\ccmsetup\hotfixes\%PROCESSOR_ARCHITECHTURE%\hotfixname.msp?
    I know you can use SCUP or packages to do the updates, but it would be much easier to do it all at once.  Hence the reason why so many people still use the ClientPatch folder, I guess.  I really wish they'd make that a supported option.

    1. No, the initial push portion is a straight SMB copy to the target client. However, that only copies a bootstrapper, ccmsetup, which in turn kicks off on the client to download the rest of the necessary files. The download by ccmsetup does use BITS though.
    2. ccmsetup downloads the necessary files from the package on the proper distribution point (although it will fallback to the MP where it would be ultimately pulling from the client folder location.
    3. Yes, you could create the folder but that would not cause it to be copied to target client. The files it downloads are a fixed list.
    The most you could do is add it to the client push properties but that is problematic because the patches are architecture specific. Thus, there really is no good way to do this using client push.
    A client startup script however offers many advantages including being able to do this.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SCCM Client push or manual installation does not complete

    Hi All,
    I have deployed SCCM 2012 R2 in my lab environment. It has been deployed successfully. I have a issue in which the clients are not getting installed both manually and by pushing the agents via the console. 
    My servers are as follows:
    SCCMSVR.labtest.com  - Is the SCCM server and Fail back status point.
    Server.labtest.com - Is the Domain controller, SQL server
    SCCMTEST.labtest.com - A testing machine to push the client and to deploy patches in it.
    Site code is LAB
    I ran the setup using the following command.
    I have shared the ccmsetup in a share so the command is as follows:
    \\sccmsvr\Client\ccmsetup.exe /MP:SCCMSVR /Logon SMSSITECODE=LAB FSP=SCCMSVR
    But when i check the task manager the process of ccmsetup.exe but it does not change to CCMEXEC.exe
    I waited for an hour but still the same issue. (This was done in the DC Server.labtest.com)
    Screen shot of the DC  Machine:
    When i do a client push installation in a testing machine (SCCMTEST.labtest.com)  i still the same issue. I pushed the client still the same issue
    In the task manager the process of ccmsetup.exe but it does not change to CCMEXEC.exe.
    Screen shot of the second machine:
    Also checked the control panel. Dint find the config manager options there on both machines.
    Also turned off firewall on all 3 machines  but still the same issue.
    Analysed the event logs on all the servers. The client machines did not have any relevant events.
    The SCCM server had this event. Not sure if this is causing the issue.
    Event id 2344
    On 9/28/2014 3:26:48 PM, component SMS_DISTRIBUTION_MANAGER on computer SCCMSVR.LABTEST.COM reported:  Failed to create virtual directory on the defined share or volume on distribution point "["Display=\\SCCMSVR.LABTEST.COM\"]MSWNET:["SMS_SITE=LAB"]\\SCCMSVR.LABTEST.COM\".
    Possible cause: Distribution Manager requires that IIS base components be installed on the local Configuration Manager Site Server in order to create the virtual directory.  Distribution Manager also requires that IIS Web Services be installed on the Distribution
    Point Server that needs to support Background Intelligent Transfer Service (BITS).
    Solution: Verify that IIS base components are installed on the local Configuration Manager Site Server, and IIS Web Services are installed on the Distribution Point Server.
    Can any one please help.
    Gautam.75801

    Hi Kashif,
    Thank you for your valuable help. As you mentioned the IIS 6 WMI compatibility Feature was not installed. Once i installed and rebooted the SCCM server and pushed
     both the agents manually and by Pushing it via console and it succeed. How ever i got some errors on both the systems The trace log tool during the installation but it succeed.
    What i would like to know is that is it common to get errors like the below while pushing a agent automatically or manually ?
    1. MSI: Action 1:25:44: CcmRegisterComponentsRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
    (Got this multiple times)
    2. MSI: Warning 25702. Failed to uninstall PrepDrvr.Sys for Software Metering Agent.
    3. Failed to load mdmregistration.dll. Continue deployment.
    4. Failed to load mdmregistration.dll with error 0x8007007e
    5. File 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' does not exist. Discovery failed.
    6. File 'C:\Windows\system32\msrdc.dll' does not exist. Discovery failed.
    7. Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
    8. Failed to check url http://SCCMSVR.LABTEST.COM/SMS_DP_SMSPKG$/LAB00002. Error 0x80004005
    9. Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
    10. As per the screen shot.
    Gautam.75801

  • WebDAV error when doing a client push ConfigMgr 2012 R2

    Hi everyone, I am getting an error message when doing a client push, only on some DPs.
    Here is the setup:
    ConfigMgr 2012 R2 on Server 2012 R2.
    DP are on Server 2008 R2 (for the most part).
    DP are installed using the exact same way, adding the Primary Site Server to the local Admins group, then using the console to install the role, selecting BranchCache and Configure IIS.
    No PXE.
    Boundary groups are configured as appropriate.
    When initiating a client push the following errors are displayed in the CCMSetup.log:
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401)
    Failed to check url http://DPServerName.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
    GET 'HTTP://MPServerName.com/CCM_Client/ccmsetup.cab'
    The installation is done but yet again, no local DP are used.
    The same scenario is actually working on other DP that was configured using the same exact way.
    Servers where not new installation and where used for other things:
    MDT Deployment Share with PXE.
    Other share.
    As far as I can tell, IIS is well configured as I am able to deploy any other software on clients and they are using the local DP. Only the client installation is causing problem.
    Anyone have any idea?
    There is a lot of post about a similar problem on ConfigMgr 2007 but all solution are to configure WebDAV, which is not configured in ConfigMgr 2012.
    Thank you guys for any tip and/or help!
    Mathieu

    You are right about the log, here is a longer snippet of it:
    ==========[ ccmsetup started in process 5980 ]========== ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
    Running on platform X86 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
    Launch from folder C:\Windows\ccmsetup\ ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
    CcmSetup version: 5.0.7958.1501 ccmsetup 2015-03-25 23:12:12 1020 (0x03FC)
    In ServiceMain ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Running on 'Microsoft Windows 7 Professionnel ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    SslState value: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMHTTPPORT: 80 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMHTTPSPORT: 443 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMHTTPSSTATE: 224 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMHTTPSCERTNAME: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    FSP: ServerSCCMPSS.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    CCMFIRSTCERT: 1 ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Retry time: 10 minute(s) ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    MSI properties: INSTALL="ALL" SMSSITECODE="S01" FSP="ServerSCCMPSS.Test.com" SMSCACHEFLAGS="PERCENTFREEDISKSPACE" SMSCACHESIZE="20" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Source List: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\Serversccmmp.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\Serversccmpss.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\dcsspsccmmpdff.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\ServerSCCMMP.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\ServerSCCMPSS.Test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    \\DCSSPSCCMMPDFF.test.com\SMSClient ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    MPs: ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Serversccmmp.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Serversccmpss.Test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    dcsspsccmmpdff.test.com ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    No version of the client is currently detected. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Folder 'Microsoft\Configuration Manager' not found. Task does not exist. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Updated security on object C:\Windows\ccmsetup\. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Sending Fallback Status Point message to 'ServerSCCMPSS.Test.com', STATEID='100'. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Failed to get client version for sending messages to FSP. Error 0x8004100e ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Params to send FSP message '5.0.7958.1501 Deployment ' ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    State message with TopicType 800 and TopicId {40FD8A62-3E9A-41FB-8698-E9A6658A4A91} has been sent to the FSP FSPStateMessage 2015-03-25 23:12:12 4536 (0x11B8)
    Running as user "Système" ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Detected 206206 MB free disk space on system drive. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Checking Write Filter Status. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    This is not a supported write filter device. We are not in a write filter maintenance mode. ccmsetup 2015-03-25 23:12:12 4536 (0x11B8)
    Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=S01))' ccmsetup 2015-03-25 23:12:13 4536 (0x11B8)
    OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert>308202F5308201DDA00302010202103FC715B41292C689495889DC28401ED8300D06092A864886F70D01010B05003016311430120603550403130B53697465205365727665723020170D3134313231383136353532335A180F32313134313132353136353532335A3016311430120603550403130B536974652053657276657230820122300D06092A864886F70D01010105000382010F003082010A0282010100A78659B1C2B8160DD0CF4E10AE142E067F8D9ABD23F931443DD15ED20479E0BF70A8C2322DE863FD41B5429DB5D3CB0AA71D189C8C61E4155A59CD16DC961B75302AF7B75DF31A19E8AB6E163B622A80A5B24FD6B37B54379B74911D6B9771B3120CF72ECFAA36747861896FA99FAF79AF528E8BC2860D3F022C761363C69BBD0969E75AD83ECB60BB06F503195AC2DAAF90FA874A1F45C32111A4B55F638573942C4EAE597A8E02024E8AFFFFDEE746160D45A41615EF97A15500AE99305CE6E980CB0E0F139EAC6D368D72AEE1104C9BAB2CEA4CCAB4490F44B33047A512C4F1EB0DBF38BE66ED0DC875D09DB4C06DA44ED011556D4DEA070D45E0C80502C10203010001A33D303B30230603551D11041C301A821864637073707363636D7073732E6167726F7075722E636F6D30140603551D25040D300B06092B060104018237650B300D06092A864886F70D01010B050003820101002A2B4C225ACB02DB1389B315F12FAE33B6B0B3FD232243FAC81DDD624722908BDBF7B6CAE87351320DE47BF13A01F93A4C8C62CABB273ED5C696F42926A323E61C9477E7FD71DB693AAB3BC80CBBC0FED501292F702B7223D9AAC334631EE5AA6048028D7C26BAC2A9DB997C73E9B473CDAFDF55834C6DD5C88D5FBED4096EE739EE8C5B9238B8A4C9352C7DF9A98D0011BD8D5FE4B881F5B6B68004355147A2C264C62F1BC99B3B0D26787185863EAC426860411FF329129D270A7D38B1733A12F1EEDE246F5F24D3492A7A53B380576CE20B5F77952EC2F93240784C6ECE8D25B80494129EF3EDC7150EA9BDFA0F80E7E5E7F53673FAD6A922EA7ADE2092D3</SiteSigningCert></SecurityConfiguration><RootSiteCode>S01</RootSiteCode><CCM> <CommandLine>SMSSITECODE=S01 FSP=Serversccmpss.Test.com SMSCACHEFLAGS=PERCENTFREEDISKSPACE SMSCACHESIZE=20</CommandLine> </CCM><FSP> <FSPServer>Serversccmpss.Test.com</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="Test.com" /><Forest Value="Test.com" /></ClientOperationalSettings>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    The MP name retrieved is 'Serversccmpss.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    MP 'Serversccmpss.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    The MP name retrieved is 'Serversccmmp.Test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    MP 'Serversccmmp.Test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    The MP name retrieved is 'dcsspsccmmpdff.test.com' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    MP 'dcsspsccmmpdff.test.com' is compatible ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Retrieved 3 MP records from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Retrived site version '5.00.7958.1000' from AD for site 'S01' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    SiteCode: S01 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    SiteVersion: 5.00.7958.1000 ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Searching for a valid online MP... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Checking the URL 'HTTP://Serversccmpss.Test.com:80/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    PROPFIND 'HTTP://Serversccmpss.Test.com:80/CCM_Client' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Found a valid online MP 'Serversccmpss.Test.com'. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Searching for DP locations from MP(s)... ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Current AD site of machine is CDL LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Local Machine is joined to an AD domain LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Current AD forest name is Test.com, domain name is Test.com LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Begin checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Finished checking Alternate Network Configuration LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Adapter {72FC011A-9993-4CBD-B7B2-D1D56FD38711} is DHCP enabled. Checking quarantine status. LocationServices 2015-03-25 23:12:14 4536 (0x11B8)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
    <AssignedSite SiteCode="S01"/>
    <ClientPackage/>
    <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
    <ADSite Name="CDL"/>
    <Forest Name="Test.com"/>
    <Domain Name="Test.com"/>
    <IPAddresses>
    <IPAddress SubnetAddress="172.16.64.0" Address="172.16.65.9"/>
    </IPAddresses>
    </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{B9F091E1-649D-47C4-A0AD-19508435F962}</ID><SourceHost>C006235</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:C006235:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>Serversccmpss.Test.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="1080"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    CCM_POST 'HTTP://Serversccmpss.Test.com/ccm_system/request' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Received header '<Msg SchemaVersion="1.1">
    <ID>{336667CB-2AF5-4B7D-9B1B-3B9A39777034}</ID>
    <SourceID>GUID:8BB44537-8D62-4751-9114-1F5527EE800F</SourceID>
    <SourceHost>ServerSCCMPSS</SourceHost>
    <TargetAddress>direct:C006235:LS_ReplyLocations</TargetAddress>
    <ReplyTo>MP_LocationManager</ReplyTo>
    <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
    <Priority>3</Priority>
    <Timeout>600</Timeout>
    <ReplyCapabilities><AllowRegistrationReset>direct:ServerSCCMPSS:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>C006235</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-03-26T03:12:14Z</SentTime><Body Type="ByteRange" Offset="0" Length="2574"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">ServerSCCMPSS;Serversccmpss.Test.com;</Property><Property Name="MPSiteCode">S01</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003" Signature="http://CDLGHOST.Test.com/SMS_DP_SMSSIG$/S0100003"/><ADSite Name="CDL"/><IPSubnets><IPSubnet Address="172.16.64.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>CDLGHOST.Test.com</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site><Site><MPSite SiteCode="S01" MasterSiteCode="S01" SiteLocality="LOCAL"/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="S0100003" FullPackageVersion="7" FullPackageHash="CE8C259380667F5687A01FA5365B2D2D1236BA9FC1AD4696A54D914B919D294D" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30416572;2153570688" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Found local location 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Discovered 1 local DP locations. ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:14 4536 (0x11B8)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    PROPFIND 'http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Failed to check url http://CDLGHOST.Test.com/SMS_DP_SMSPKG$/S0100003. Error 0x80004005 ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    GET 'HTTP://Serversccmpss.Test.com/CCM_Client/ccmsetup.cab' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Successfully loaded ccmsetup manifest file. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1501' ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'i386/vcredist_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'x64/vcredist_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'i386/vc50727_x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'x64/vc50727_x64.exe' is not applicable. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list. ccmsetup 2015-03-25 23:12:15 4536 (0x11B8)
    Item
    I did double checked with a friend about my configuration and everything, just to make sure, and everything seems to be right.
    As for the use of account used to get the client, a domain join computer will not need to us the network access account if the DP is in the same domain and the same exact config on other servers is working like a charm deploying the client, same
    security and configuration.
    All default IIS security and share permission.
    Thank you guys for your suggestion and help. 
    Mat

  • Deploying client language pack while client push

    Hi All,
    How do i deploy specific  language pack with client push installation? 
    Note: I already enabled site for that language and i can see language files are exists in "Client\i386\Language Pack\".
    Thanks.

    During the client installation the client will install the languages that are available at that moment. When the languages is available later, the client has to be reinstalled. After the installation the client will automatically switch to the OS language.
    To detect the installed language, see this key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCMSetup\InstalledLangs
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude
    Thanks Peter for information.
    Do i need to use special parameter/switch in client install properties while client push installation to install language pack?
    Thanks again
    Sam

  • How to deploy Client Configuration Manager on 400 workstations step by step

    Hi to all,
    I would like to know  how to install SCCM Clients on 400 Workstations which no longer have it.Our netwok have 2250 workstations and 400 workstations don't have the SCCM client installed.How to create the deployment package?Or where to find it?
    I tried to deploy it using the pushing methods.I've created a collection of workstations which don't have the client installed.theni tredthe pushing methods but no workstations received the clients.
    Can i create a package on software distribution then deploy it to the collection?I know that it is not good for the network to deploy 400 workstations at once.
    Thanks in advance for your suggestion.
    Regards,

    Can i create a package on software distribution then deploy it to the collection?I know that it is not good for the network to deploy 400 workstations at once.
    If the systems don't have the agent already, a package can't reach them as software distribution requires the agent first.
    Here's a very nice and detailed article on troubleshooting client push: https://support.microsoft.com/en-us/kb/925282
    Remember though, it's not magic. Certain pre-requisites must be in place like permissions and firewall ports. ConfigMgr can't just conjure some voodoo to make these go away.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SCCM 2007 - how check how sccm clients was deployed

    Hi all
    I need to know how sccm clients was installed on the domain's computers in order to push sccm client in the remaining computers that not have sccm client installed.
    Do you have a method to obtain this informations from SCCM console?
    Many thanks
    Christian

    ALL Clients:::::::::::::
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.Client = 1
    ALL Non Clients
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.Client = 0 or SMS_R_System.Client is null
    some sample collections http://sccm.blog.com/collections/
    Narahari(Hurry) Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • How to scroll up and down in IBM client access using windows 7 on mac running bootcamp

    How to scrool up and down in Client Access 5250 (AS/400 emulator) using windows 7 on Mac running boot camp. The key board does not function within the client access 5250 session?

    You can also share a printer between the Mac/PC as well as files and mounted Volumes, see the Tiger articles here
    http://www.ifelix.co.uk/tech/
    You may want to use Bonjour for Windows on your PC
    http://www.apple.com/macosx/features/bonjour/
    Then there are VNC clients for Mac/PC that also allow you to actually control the other machine, if they aren't in the same room and you just need to check something quick that can be handy, it's kind of slow though for regular use.
    The main benefit of partitioning is being able to have different versions of bootable OS on them. You can try out Leopard on a new partition, while keeping your Tiger partition intact, you can have a XP/Vista partition for parallels or BootCamp, etc... other than that drives are pretty much fast enough, having smaller partitions probably won't realize any significant speed ups over searching the whole large drive.

  • Best practise for installing patches for SCCM Client 2012 (Both x86 and x64)) - OSD and Client Push Installation

    Hi All,
    What is best practice for automatic installing of SCCM 2012 client Patches
    (using Patch switch) during installation of SCCM 2012 clients? The challenge is that now there are two versions of clients and updates (x86 and x64).
    I need information for:
    OSD
    Client Push Installation
    Thank you in advance.
    Regards,

    Not everything that can be or is supported or not supported is documented (or ever can be):
    http://technet.microsoft.com/en-us/magazine/jj643252.aspx
    Your expectation here needs to be adjusted. No one recommended contacting support. William just mentioned that *if* you have an issue and needed to contact support, they may decline to help you because you've done something explicitly unsupported.
    For clientpatch, here's the specific documentation noting it as unsupported:
    http://blogs.technet.com/b/configmgrteam/archive/2009/04/08/automatically-applying-hotfixes-to-the-configuration-manager-2007-client-during-installation.aspx
    Additionally, I've also been in contact with the sustained engineering folks responsible for the CUs and they've reinforced the statement.
    What can happen? Who knows? Microsoft does not test against unsupported configurations and features -- that's the definition of unsupported. It's not tested so no one really knows. They did find a couple of explicit issues (outlined in that post above) so
    know that at least those exist and probably more since it is, as mentioned, abandoned code.
    Why does it matter what can happen though? If the folks who write and support the code tell you shouldn't do it, you are simply asking for problems by doing it. Ultimately, you're asking a question that has no defined answer (except "bad"/unsupported things)
    that really doesn't matter if you follow the explicit guidance. If you don't, as William points out, that's a risk for you take and an answer for you to discover.
    Jason | http://blog.configmgrftw.com

  • How to change my client push installation version

    I have one primary site server.  I have updated it to 5.00.7958.1401 and this is the version shown if i check "about system center configuration manager".
    When i push the client to machines by right clicking and choosing "install client"...SCCM installs client version 5.00.7958.1000.
    How can I change it so my client push installs the CU3 version 1401?
    Thanks

    If you were to mess with the files in the client folder of the site server's installation path, you would place your self in an unsupported state, though this is simple...
    how about using the PATCH parameter for ccmsetup.exe? You could configure it in the Client Push Installation / Installation Properties tab...
    http://thecmadmin.com/2013/08/01/installing-cumulative-update-2-cu2-for-cm12-sp1-during-initial-client-install/
    other reference:
    http://blogs.technet.com/b/deploymentguys/archive/2012/10/11/automatically-populate-the-patch-property-for-the-configmgr-client-installation-updated-for-configmgr-2012.aspx

  • Client Push install, deploying slower then expected.

    I am in the process of standing up my SCCM 2012 R2 enviroment, I have a CAS, and 1 primary site(adding more later), and from the Primary site, I have several Distribution sites.  Boundaries have been detected and I have configured them into appropriate
    Boundary Groups (Only using IP based Boundaries), and I have pointed the group to the Site server for the distribution point.  These sites are only running the Site System, and Distribution Point, the only Management point is on my Primary server.  In
    the beginning I was manually kicking of the Client install base on collections, but now that I have all my DP set up.  I enabled the Client Push Installation, selecting only Workstations, the account is the same account I was using to deploy the clients
    manually, and the only Installation Properties is the SMSSiteCode.  I enable the Client Push 24 hours ago, and it has only installed on an additional 300 computers, out of about 3000 that had not yet received the client.
    I have viewed the CCM.log and I see it rolling through at a slow rate, I expected to get a large influx of clients do to the number without it.  Is this a generally slow method?  I have clients reporting, in all boundaries, except for 1, and the
    DP points are showing they have the SCCM client.  I have spot checked the IP Boundaries from SCCM with what I have in our DHCP servers in those locations, and they are correct.  I have verified, the service account can ping and has access to the
    admin share.
    Is there something I missed? 

    I concur, if you are just now installing clients agents, stop, format your drives and start over, there is no reason for having a CAS and it *will* cause you issues having one.
    As for the CCM, process, there are a lot of caveats. First you mentioned having 6,000 clients? Where is this number from? Is this the number of clients discovered by ConfigMgr?
    Next, ConfigMgr will *not* generate a CCR for clients not assigned to the site (unless it is forced to during manual client install). No, if are viewing the All Systems collection, any resource without a site code will *not* have a CCR generated for it.
    CCM, as Torsten mention, throttles itself to 10 CCRs at a time. Any CCRs that get placed in the ccrrety box get retried every hour. So, if you have 3,000 assigned resources without client agents, it will take a while for it churn through those. The next
    time full discovery runs, CCRs will again be created for any assigned resources that do not have the client agent installed.
    Jason | http://blog.configmgrftw.com
    +1
    John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

  • SCCM Client Push Installation Wizard does not install the client. CCMSetup folder - not created

    Hello,
    I have tried running the Client Push wizard for a single computer or a pilot collection of 8 computers, the result is always
    the same - no SCCM client is installed on any computer.
    The computers are running 32-bit Windows XP SP2.
    The Windows firewall is disabled.
    The client push installation account is setup and have domain admin and local admin privileges. Client Push automatic method
    is not enabled.
    The domain is AD WIndows 2000.
    The SCCM server is running Windows 2003 R2 SP2 64bit Standard.
    The AD schema has been extended.
    MP, and SLP are installed and published. (MP is published in DNS as well.)
    FSP is installed.
    MP, SLP and FSP are running on the same server.
    SQL 2005 server is running locally.
    System management container is created and all rights and permissions delegated.
    With the Push installation account I can access C$ share on the client computer from the SCCM server.
    RPC, Remote registry, WMI services are running on the client machines.
    All prerequisites are installed from the client folder on SCCM server- latest BITS 2.5, Windows installer 3.1 and MSXML6.
    All computers are in the same IP subnet which is listed in the boundaries.
    Yet, the client is not being installed.
    No CCMSetup folder is created on the client machines in Windows\System32 folder, so it is really difficult to troubleshoot
    what the is the issue. I do not see anything helpful in the ccm.log on the server.
    I have tried running the CCMSetup.exe manually on one of the workstations and that was successful and reported back to the
    SCCM server / console.
    What else I should check / try? I really want to push agents via the wizard.
    Thank you,
    Peter

    Hi Wally,
    I have changed 2 things:
    1. Enabed automatic push installation (so I am not usign the wizard any more)
    2. Changed the IP subnet to IP ranges in the site boundairies.
    After runnignt the discovery, I was able to see some activities in the ccm.log. A ccmsetup folder is now created but the agent is still not instaleld. Here is the ccmsetup.log
    ==================================
    <![LOG[==========[ ccmsetup started in process 3140 ]==========]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:8853">
    <![LOG[Version: 4.0.5931.0000]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:1913">
    <![LOG[Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3937">
    <![LOG[Command line: "C:\WINDOWS\system32\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3946">
    <![LOG[CCMHTTPPORT:    80]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7851">
    <![LOG[CCMHTTPSPORT:    443]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7866">
    <![LOG[CCMHTTPSSTATE:    0]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7884">
    <![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7912">
    <![LOG[FSP:    HFXDBSSOM.CORP.EASTLINK.CA]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7927">
    <![LOG[CCMFIRSTCERT:    0]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7969">
    <![LOG[Config file:      C:\WINDOWS\system32\ccmsetup\MobileClient.tcf]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4341">
    <![LOG[Retry time:       10 minute(s)]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4342">
    <![LOG[MSI log file:     ]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4343">
    <![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="PHX" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="0" FSP="HFXDBSSOM.CORP.EASTLINK.CA" CCMFIRSTCERT="0"]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4344">
    <![LOG[Source List:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4352">
    <![LOG[                  \\HFXDBSSOM.corp.eastlink.ca\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4359">
    <![LOG[                  \\HFXDBSSOM\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4368">
    <![LOG[MPs:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4371">
    <![LOG[                  HFXDBSSOM.corp.eastlink.ca]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4386">
    <![LOG[Updated security on object C:\WINDOWS\system32\ccmsetup\.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="0" thread="3108" file="ccmsetup.cpp:8692">
    <![LOG[Sending Fallback Status Point message, STATEID='100'.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:9169">
    <![LOG[State message with TopicType 800 and TopicId {A450B407-619B-4777-B77E-C3352753B58A} has been sent to the FSP]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="3108" file="fsputillib.cpp:730">
    <![LOG[Running as user "SYSTEM"]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:2534">
    <![LOG[Detected 24292 MB free disk space on system drive.]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:465">
    <![LOG[DetectWindowsEmbeddedFBWF() Detecting OS Version]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:511">
    <![LOG[Client OS is not Windows XP Embedded]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:548">
    <![LOG[Successfully ran BITS check.]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:6948">
    <![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="3" thread="2600" file="ccmsetup.cpp:5813">
    <![LOG[Sending Fallback Status Point message, STATEID='308'.]LOG]!><time="09:45:08.760+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:9169">
    <![LOG[State message with TopicType 800 and TopicId {3BFABF82-FB74-43FB-8A4A-6DFDEAEAC25C} has been sent to the FSP]LOG]!><time="09:45:08.776+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="2600" file="fsputillib.cpp:730">
    ==============================================================
    There are two red errors I am concerned about:
    "Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)
    and
    "Failed to download 'WindwosXP-KB923845-x86-ENU.exe' from http://HFXDBSSOM.corp.eastlink.ca/CCM_Client/i386/BITS25 with error code 0x80004005).
    What should I do to resolve these errors?
    Thanks,
    Peter

  • My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

    My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

    Apple Support (formerly ExpressLane):
    https://getsupport.apple.com/GetproductgroupList.do
    https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

Maybe you are looking for

  • Pl/sql editor navigation bar

    hi! Is it possible to have the navigation bar for pl/sql editor in Visual Studio inside an Oracle Database Project? The navigation bar is visible if I open a package body from server explorer, but not if I open the generated create script. The naviga

  • Installed Windows 8.1 and now iTunes is gone

    I had been using the Windows 8.1 preview and itunes worked fine, but after "upgrading" to 8.1 Pro all of the software I had rpeviously installed had to be re-installed, including iTunes. However, every time I try to install it, it asks if I wish to "

  • Dynamic class loading in Applets

    Fully loaded applet in some browser, depending upon some user action, has to perform following things : (1) has to establish an network connection with some other system or server( other than Web Browser Server ) and get named( file name is known to

  • How to access Dictionary SimpleTypes in View's code??

    Hello All, I want to access the description corresponding to a 'Value' of a dictionary SimpleType. How do I achieve this? Please help me. regards, Amey

  • Functionality of Event

    Hi gurus , At selection Screen output will checks Initialization Values or After Modify Screen Values? or both. Pls Provide me Correct Explanation about At selection screen output Event Functionality. Thank u  for ur response. sudhakar