How did i solve "Cannot create target element" but still having problems.
Hi Experts,
I solved my problem of "Cannot create target element" by removing of the data type structure the following fields :
DT_AS400_1 -> Complex Type
Payroll 1..1 (Should i put 0..0?)
-> Row 0..Unbounded And then Fields to be passed.
I can't figure how pi can't detect the fields, i use them pretty often.
Any Suggestions,
Thanks for your help,
Regards,
Steve.
Hi Steve,
Check if input message, has the field that is producing the output.
Therefore, if you don't have any input to fill the structure root, you can fill it with an empty constant.
Best regards,
Pedro M. D. Pereira
Edited by: Pedro Pereira on Jun 10, 2010 1:26 AM
Similar Messages
-
Cannot create target element/ns1:MT_CONTRACT.Value missing in queue context
Hi Friends,
AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,5100000102515,CARD-Twiglets Original 45g x 12,0,1,10,AM04,N
002,UBUK,1568956,LP,16.02.2011,16.02.2012,3P,GBP,FOB ,D,V1,6000005,CARD-Twiglets Original 45g x 12,0,125.00,145,AN03,N
that is csv file am trying to convert to xml. but am getting error "Cannot create target element /ns1:MT_CONTRACT. Value missing in queue context."
my data types is: MT_CONTRACT_SNDR MT_CONTRACT
SUB_ELEMENT: Recordset Recordset
SUB_ELEMENT: Item Item
SUB_ELEMENTS: AgrmntID AgrmntID
Company_Code Company_Code
Vendor_No Vendor_No
like this all the 18 elements under Item node. I kept Recordset occurance 0-1 and Item 0-Unbound and all 18subelements as 0-1 in both sender and receiver. And in content conversion:
Document Name: MT_CONTRACT_SNDR
Document Offset: 1
Recordset Structure: Item,*
Record Sequence: Asending
Recordsets per Massage: 1
Key Field Type: String (Case-Sensitive)
Item.fieldSeperator : ,
Item.endSeperator: 'nl'
Item.fieldNames: AgrmntID,Company_Code,Vendor_No,PurDoc_Type,ValidPeriod_Start,ValidPeriod_End,Pur_Group,Currency,Incoterms,Item_Cat,Tax_Code,Part_No,Document_Desc,Net_Price,Tgt_Qty,Price_Unit,Plant,Price_Revision
KINDLY SUGGEST ME WHAT MISTAKE AM DOING. AM NEW TO SAP PII have this error in audit log. On searching I read that the error is connectivity problem between abap stack and java stack. but I made restart the server but error not cleared. can anyone of you suggest me to solve?
Audit Log for Message: 7c06ee0d-d70b-406f-07bc-f56228cc1d6a
Time Stamp Type Description
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:05:07 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:05:07 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:05:07 Information The message status was set to WAIT.
10.08.2011 18:05:07 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:10:07 IST 2011.
10.08.2011 18:10:07 Information The message status was set to TBDL.
10.08.2011 18:10:07 Information Retrying to deliver message to the application. Retry: 1
10.08.2011 18:10:07 Information The message was successfully retrieved from the receive queue.
10.08.2011 18:10:07 Information The message status was set to DLNG.
Time Stamp Type Description
10.08.2011 18:10:07 Information Delivering to channel: CC_Contrct_Recivr
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for ZFM_SRM_CONTRACT_CREATE with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:07 Information RfcAdapter received a asynchronous message. Trying to send tRFC for J2EE_GUEST with TID XIV0Rk3TSBG6y7lFLYACmTQW.
10.08.2011 18:10:08 Error Adapter Framework caught exception: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.
10.08.2011 18:10:08 Error Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZFM_SRM_CONTRACT_CREATE in remote system (RfcClient[CC_Contrct_Recivr]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught..
10.08.2011 18:10:08 Information The message status was set to WAIT.
10.08.2011 18:10:08 Information The asynchronous message was successfully scheduled to be delivered at Wed Aug 10 18:15:08 IST 2011. -
Cannot create target element /Invoice. Values missing in queue context.
Hi Experts,
I am working on Idoc to File scenario using SAP PI 7.1. In this scenario I am mapping Invoic02 Idoc with Invoice xsd. I am able to test the mapping in ESR with status as success.
In ID Tools --> Test Configuration I used the same payload and tried testing the configuration step by step. while executing I am getting an error at Operation Mapping saying "Runtime exception occurred during application mapping com/sap/xi/tf/_MM_SRM_Hubwoo_Invoice_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /Invoice. Valuesmissing in queue context. Target XSD requires a v~"
Even though the mapping is getting executed successfully in ESR, I am not able to fix this issue. Need your inputs in resolving the same.
Regards,
Saurabh
Edited by: saurabh mathure on Oct 16, 2010 8:14 AMHi ,
issue"Can not create the target element value missing the queue context'.
reason for this issue:
Target field expecting some value from sender field. so in testing your not getting any data from source field for this reason your getting that issue.
Solution:
In mapping use node function:Mapwith deafault between source and taget fileds.
Then activate mapping . now excute the scenario it will properly without that issue.
Cheers,
Meera -
EXCEPTION_DURING_EXECUTE and Cannot create target element ?
hi experts
i got error in jdbc to idoc scenario (PI 7.1 sp7)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_mm_avabtis_to_ps_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ZENTITY. Values</SAP:P3>
<SAP:P4>missing in queue context. Target XSD requires a v~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_mm_avabtis_to_ps_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ZENTITY. Valuesmissing in queue context. Target XSD requires a v~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
jdbc struc
jdbcdt->
row -->
comp
plant
dept
entype
entity
endesc
glcode
Idoc struc
zentity root--> (mapped to jdbcdt)
idoc
begin -
>( constant value 1)
edi_dc40---->(Disabled Total segment)
z1entity -
>(Mapped to Row)
segment -
>(Constant value 1)
comp
plant
dept
entype
entity
endesc
glcode
please help me out.Hi
-->In your IDOC do you have any other segments which are mandatory?Please do recheck your IDOC structure and check for the mandatory segments and assgin them with the constant value 1.
-->The error seems to be the mandatory segment value is not mapped.
Thanks -
Cannot create target element(Runtime exception occurred during application
Hi ,
this is IDOC TO HTTP Scenario. in error description it is shoein g below error.
Runtime exception occurred during application
Cannot create target element (inbound)
please advice
thank you.Copy the payload from sxmb_moni and test it in the mapping tool using debug mode. I suspect some mandatory elements in target structure requires value but it is missing during mapping. Sometime sender data structure due to values are not getting at runtime does not create target structure element. Check all the individual fields in the mapping tool.
-
UDF required !! Cannot create target element Values missing in queue context
Dear Experts,
I am getting the cannot create target element error with acknowledgement payload in response message mapping in synchronous interface. I have shared the response payload2. Please suggest do I need write any UDF.
Message mapping successful with below payload1:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:updateOppResponse xmlns:ns0="http://soap.sforce.com/schemas/class/clientUpdateInqWebService">
<ns0:result>
<ns0:Description>Record Updated</ns0:Description>
<ns0:SFDCId>006M0000007xjTrIAI</ns0:SFDCId>
<ns0:Status>true</ns0:Status>
</ns0:result>
</ns0:updateOppResponse>
With the below target system response message, Mapping failing with Cannot create target element /ns1:MT_InquiryUpdate_ECC_Ack. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD com.sap.aii.mappingtool.tf7.IllegalInstanceException:
Actual acknowledgement reply from target system payload2:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns="http://soap.sforce.com/schemas/class/clientUpdateInqWebService" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<updateOppResponse>
<result>
<Description>Record Updated</Description>
<SFDCId>006M0000007xjTrIAI</SFDCId>
<Status>true</Status>
</result>
</updateOppResponse>
</soapenv:Body>
</soapenv:Envelope>
Regards
RKNHi
The easiest solution will be , write an simple java map for your response mapping.
Please provide your target structure , if you need any help on the java mapping.
Sample code:
Response message from web service
target msg:
java code:
package com.sap;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
public class populateResponseMessage extends AbstractTransformation {
public void transform(TransformationInput arg0, TransformationOutput arg1)
throws StreamTransformationException {
try {
DocumentBuilderFactory tfactory = DocumentBuilderFactory
.newInstance();
DocumentBuilder tbuilder = tfactory.newDocumentBuilder();
Document doc = tbuilder.parse(arg0.getInputPayload()
.getInputStream());
Document newdoc = tbuilder.newDocument();
Element root = (Element) newdoc.createElementNS(
"urn:sap-com:document:sap:rfc:functions",
"ns1:ZTEST_FAULT_MESSAGE_DATA.Response");
newdoc.appendChild(root);
NodeList nlList = doc.getElementsByTagName("ConversionRateResult");
if (nlList.getLength() != 0 && nlList != null) {
Node data = nlList.item(0);
String sourceval = data.getTextContent();
Element rate = (Element) newdoc.createElement("RATE");
rate.setTextContent(sourceval);
root.appendChild(rate);
Transformer transformer = TransformerFactory.newInstance()
.newTransformer();
Source source = new DOMSource(newdoc);
Result output = new StreamResult(arg1.getOutputPayload().getOutputStream());
transformer.transform(source, output);
} catch (Exception e) {
e.printStackTrace();
}// end of transform -
Cannot create target element /ns0 Values missing in queue context
Hi Sdn,
When I am testing the Message mapping in PI i am getting the below error message .
Cannot create target element /ns0:TechObjChange. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD See error logs for details
Could you please tel me what would be the wrong.
below is the XML file data .
<?xml version="1.0" encoding="UTF-8"?>
<ns0:TechObjChange xmlns:ns0="http://schemas.xxxxx.com/iiiii/xxxxxx">
<TechObjChangeFLEQ>
<FormType/>
<FunctionalLocation/>
<Descoffunctionalloc/>
<Equipment/>
<DescofEquipment/>
<StartupDateofTechObj/>
<Manufacturer/>
<Manufacturermodelnumber/>
<Manufacturerpartnumber/>
<Manufacturerserialnumbe/>
<Countryofmanufacture/>
<Yearofconstruction/>
<Monthofconstruction/>
<TypeofTechObject/>
<PlannerGroup/>
<MainWorkCenter/>
<CatalogProfile/>
<NameofUserchangingtheobject/>
<Characteristic>
<CharacteristicName/>
<Characteristicvalue/>
</Characteristic>
<MeasuringPoint>
<MeasurementPosition/>
<Characteristic/>
<MeasurementPoint/>
<MeasuringPointAsIs/>
<MeasuringPointAsLeft/>
<PCTCodeGroupMP/>
<PCTCodeMP/>
</MeasuringPoint>
</TechObjChangeFLEQ>
</ns0:TechObjChange>WSDL structure
WSDL structure
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://schemas.xxxxxxxx">
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:p0="http://schemas.xxxxxxxxx" targetNamespace="http://schemas.xxxxxxxxxx">
<xsd:element name="TechObjChange">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="TechObjChangeFLEQ">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FormType" type="xsd:string" minOccurs="0" />
<xsd:element name="FunctionalLocation" type="xsd:string" minOccurs="0" />
<xsd:element name="Descoffunctionalloc" type="xsd:string" minOccurs="0" />
<xsd:element name="Equipment" type="xsd:string" minOccurs="0" />
<xsd:element name="DescofEquipment" type="xsd:string" minOccurs="0" />
<xsd:element name="StartupDateofTechObj" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturer" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturermodelnumber" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturerpartnumber" type="xsd:string" minOccurs="0" />
<xsd:element name="Manufacturerserialnumbe" type="xsd:string" minOccurs="0" />
<xsd:element name="Countryofmanufacture" type="xsd:string" minOccurs="0" />
<xsd:element name="Yearofconstruction" type="xsd:string" minOccurs="0" />
<xsd:element name="Monthofconstruction" type="xsd:string" minOccurs="0" />
<xsd:element name="TypeofTechObject" type="xsd:string" minOccurs="0" />
<xsd:element name="PlannerGroup" type="xsd:string" minOccurs="0" />
<xsd:element name="MainWorkCenter" type="xsd:string" minOccurs="0" />
<xsd:element name="CatalogProfile" type="xsd:string" minOccurs="0" />
<xsd:element name="NameofUserchangingtheobject" type="xsd:string" minOccurs="0" />
<xsd:element name="Characteristic" minOccurs="0" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="CharacteristicName" type="xsd:string" minOccurs="0" />
<xsd:element name="Characteristicvalue" type="xsd:string" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="MeasuringPoint" minOccurs="0" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="MeasurementPosition" type="xsd:string" minOccurs="0" />
<xsd:element name="Characteristic" type="xsd:string" minOccurs="0" />
<xsd:element name="MeasurementPoint" type="xsd:string" minOccurs="0" />
<xsd:element name="MeasuringPointAsIs" type="xsd:string" minOccurs="0" />
<xsd:element name="MeasuringPointAsLeft" type="xsd:string" minOccurs="0" />
<xsd:element name="PCTCodeGroupMP" type="xsd:string" minOccurs="0" />
<xsd:element name="PCTCodeMP" type="xsd:string" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="TechObjChange">
<wsdl:part xmlns:p4="http://schemas.xxxxxxx" name="TechObjChange" element="p4:TechObjChange" />
</wsdl:message>
</wsdl:definitions> -
How can i seperate to i phones that have been synced together. I created two different Apple Id accounts but for instance my icloud purchase didnt go to the phone i needed it to go to
If you look at Settings > iCloud on each phone, is the Account different? The Apple ID listed there should control iCloud storage allocation. [I assume your "icloud purchase" was more storage capacity.]
The Apple ID is separately specified to control iMessage, iTunes and App Store purchases, etc. -
How do I stop popups from coming up I have it checked in the box already but still having problems
How do I stop popups from coming up? I have checked the box for popups already.
atobias1981 wrote:
My computer is running slower also! The popups are ads & it says hide ad & when I do it opens it up.
If these ads have a black border on one side with a square "Hide Ad" button with an 'X' in it, then you are infected with the Downlite adware, at least. You may have more than one piece of adware installed.
If the instructions in the Adware Removal Guide that Kappy referred you to are too tough to follow, that page also has a link to an Adware Removal Tool that will automatically remove Downlite and anything else for you. If you don't want to trust some app that a random guy online referred you to (which is perfectly understandable), the manual instructions will do the job just as well... you could always have a tech-savvy friend help you follow them. -
I want Norton back on my tool bar. If unable to get back I will have to stop using Firefox
Symantec are due to release updates very soon to make their add-ons work in Firefox 4.0.1. For details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808
Pending this update, you can go back to Firefox 4.0, their add-ons work in that version. You can get Firefox 4.0 from http://releases.mozilla.org/pub/mozilla.org/firefox/releases/4.0/win32/ - you need to select the folder for your language, you can then download and run the Firefox 4 setup file to install it.
If you do install Firefox 4.0 temporarily turn off automatic updates until Symantec update their add-ons. To do that in the Firefox options window, go to the Advanced panel, and then the Update tab and de-select the option to automatically check for updates to Firefox. -
While using HP 34401A Multimeter, I'm trying to create a database but am having problems with it.
Hi, I'm trying to save the readings in a ASCII file by using in 'HP 34401A Getting Started.vi', a file provided in the instr.lib folder.
The multimeter reads the instruments correctly and displays it on the screen, but when I connect the wire to 'Write to Sreadsheet File.vi', it shows 0 in the ASCII file (which I open in Excel) yet showing the correct readings on the screen.
Any help is truley appreciated.
Kunal.Kunal,
When using the "Write to Spreadsheet File.vi", make sure that you have the format parameter correct. You can find a list of the parameters by going to Help\Contents and Index\Index in LabVIEW and searching for "formatting". "Specifier Syntax in Strings" and "Format Specifier Examples" may be useful to you. Make sure that you have enough decimal places.
The LabVIEW User's Manual may also be of use to you. You'll find the link below.
http://digital.ni.com/manuals.nsf/caba5d53e9b015a186256793004eebb7/29b411c6839de35b8625690d007612ad?OpenDocument
Kim L.
Applications Engineer
National Instruments -
ERROR Cannot create target (optional) element - SUPPRESS value
HI, XI/PI experts!
I am new in PI 7.1 (Ehp1 SP 7), previously work with PI 7.0.
I faced with problem of mapping optional target element, when queue has just SUPPRESS element. I expected to suppressing mapping of the target element, but mapping program raise exception:
Cannot create target element
/ns0:Messages/ns0:Message1/MT_DiadocMethods/ConnectInfo/TraceInfo/Folder.
Values missing in queue context.
Target XSD requires a value for this element, but the target-field mapping does not create one.
Check whether the XML instance is valid for the source XSD,
and whether the target-field mapping fulfils the requirement of the target XSD
XSD Folder declaration:
<xsd:element name="Folder" type="xsd:string" minOccurs="0">
<xsd:annotation>
<xsd:documentation>
u043Au0430u0442u0430u043Bu043Eu0433 u0434u043Bu044F u0442u0440u0430u0441u0438u0440u043Eu0432u043Au0438 u0447u0435u0440u0435u0437 u0444u0430u0439u043Bu044B
</xsd:documentation>
</xsd:annotation>
</xsd:element>
[http://imagepost.ru/?v=queue_for_optional_element_fol.PNG|http://imagepost.ru/?v=queue_for_optional_element_fol.PNG]
If put mapWithDeffault with value "hello" between ifWithoutElse and target element Folder, then exceptions not raised, but target element also not created
15:53:03 Start of test
Compilation of MM_Diadoc_DownloadNewEvents__DiadocMethods_q successful
Document start
Start tag [ns0:Messages]
Add raw attribute [ xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"]
Start tag [ns0:Message1]
Start tag [MT_DiadocMethods]
Start tag [ConnectInfo]
Start tag [trace_level]
Put value [4]
Close tag [trace_level]
Start tag [TraceInfo]
Start tag [TraceViaMail]
Close tag [TraceViaMail]
Close tag [TraceInfo]
Close tag [ConnectInfo]
Close tag [MT_DiadocMethods]
Close tag [ns0:Message1]
Close tag [ns0:Messages]
Document end
Execution of mapping on server took 1160 milliseconds Executed successfully
15:53:05 End of test
<Display Queue> show that queue after mapWithDeffault has <null> value:
[http://imagepost.ru/?v=mapwithdeffault.PNG|http://imagepost.ru/?v=mapwithdeffault.PNG]
Inserting mapWithDeffault is workaround for this situation, but I am interesting to understand principle of SUPPRESS in 7.1
Thanks in advance and sorry for my English !Hi,
To understand the Suppress you can refer the below blog
/people/stefan.grube/blog/2006/01/09/the-use-of-suppress-in-the-xi-30-graphical-mapping-tool -
Unable to create Target Element error
Hi Experts,
I have Source and taget messages as below:
Target Structure
MT_Table----
1:1
Row--
0..unbound
-Field1--
1.1
-Field2--
1.1
-Field3--
1.1
-Field4--
1.1
Source is IDOC
ZMaterial----
1.1
IDOC--
1.1
-Begin--
Req
---EDIDC40
Segement---1.1
Table----
1.1
-E1MARAM-1.999
-SEGMENNT--0..999
Field1-------0..1
Field2-------0..1
I will have multiple IDOCs where I need to generate Multiple rows in a file:
I am getting an error as below:
Start of test
Cannot create target element /ns0:MT_Table/Row[2]/Field1. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD
I have a condition if SEGMENT-Field1 equals A then substring of SEGMENT-Field2 (first 16 characters).
Many Thanks
RajeevI see the Source Message is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<ZMaterial>
+<IDOC BEGIN = "1">
+<IDOC BEGIN = "1">
+<IDOC BEGIN = "1">
</ZMaterial>
Dont know how to get multiple rows in a file with multiple IDOCs.
Any Light please?
Thanks
Rajeev -
How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP
How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP
Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg -
I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?
This tech note addresses your problem: iOS: Deactivating iMessage
Maybe you are looking for
-
Want to use xrandr, but it says extension "RANDR" is missing
hello! i have a problem and i don't know why, i think i have everything done to be able to use xrandr (nvidia-settings needs it). but i can't. that is my problem: $ xrandr Xlib: extension "RANDR" missing on display ":0.0". RandR extension is missing
-
Hundreds of Duplicate Embedded Fonts in PDF Makes it HUGE
Hello! I have a document (word docx file) that is over 150+ pages long. When I print to Adobe Acrobat Pro - it crashes. When I open the document in Preview, it looks fine - but after saving the file as a PDF, the file size is HUGE (over 250+ mb in si
-
Help! Xsan 1.2 trashed my san!! Can I go back to 1.1? Kernel panics!!
As soon as I upgraded the server/controller and clients to Xsan 1.2, the clients would no longer mount normally (Xsan Admin either didn't show the client at all or showed client with an orange dot and would not mount). The only way I could get the cl
-
Hi, when you redirect traffic to the CWS service for scanning, do you redirect the real traffic this way or is it a mirrored copy of the traffic ? If all traffic is redirected to the Cloud, where are the Cisco datacenters located. Good to know I gues
-
Hello, I shorter the code. In MainWindow I have a button to open a SecondWindow private void ButtonNextWindow_Click(object sender, RoutedEventArgs e) WindowState = WindowState.Minimized; var secondWindow = new SecondWindow();