How did my Nano device name change? And how do I chnage it back?

Hello - The name of my device is supposed to be, and has been until now, Austin. Suddenly, its name has changed to Megan's iPod. The Austin library is unfindable. Any ideas on how to restore Austin? Thanks!

It didn't work >.< arrghhhhh ! heres another question, when restoring my ipod can I change the icloud email when it askes for my password for the wrong email?

Similar Messages

I was having issues with my 80G Video iPod and had to restore it, but now it seems all of my music on it previously is "corrupt" . How did all my songs get corrupted and how do I fix them?

I was having issues with syncing my 80G video iPod, so I restored it, and now all my songs in my library are "corrupted" and I can't get them back on my iPod. I keep getting error(-69). How did my songs all get corrupted, and how do I fix this without having to purchase these songs all over again?

Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time; you can see what content you can download here:
http://support.apple.com/kb/HT5085
You can also re-download content using an iOS device.
For more information, see:
http://support.apple.com/kb/ht2519
This if course will not apply to songs you did not buy through the iTunes Store.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

How did my entire music library disappear and how do I retrieve it?

Have not used iTunes in several months. Only had music, but it was a large library. A few tunes were from a personal CD and most were purchased. I recently opened the library to find it empty. Where did my songs go. They been there for years! Why would they suddenly disappear and how do I get them back???

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

How did CleanMyMac get on my iMac and how do I get rid of it?

Recently this app showed up. I didn't download it intentionally. Is it part of the OS or just adware / malware? How do I get it off the Mac?

Unless you download it there is no way for it to get on your computer.
If you find an uninstaller for it in your Applications folder or in the original media then use it. Otherwise, I recommend:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.

Help, please! I am suddenly being presented with CYMK colors to 2 decimal points. What did I accidentally change and how can I fix it?

This is driving me crazy. I am suddenly being presented with CYMK colors to 2 decimal points. Too much info for me. What did I accidentally change and how can I fix it? I've been through all of the preferences, views etc. I can find but no luck. Thinking this has something to with the color settings (obviously) but with all of the possible options there I could use some help. Thanks, all!

May have been a switch from RGB to CMYK.
Or you moved one of the sliders with shift key pressed.

New York Jets - How Did They Get That Name?

I remember the old New York Titans of the AFL, but then one day, they were called the Jets. How did they get that name (West Side Story?), and where did it come from?
Rod, are you home?
Hunt

hiya...hehe... was crying ...jets lost...boo hoo....
gotta admit ne pats defense and offense were just too good...couple turnovers and jets = dead ducks ( making that gargling sound in throat as they bit the dust ).
why jets name ??? dont know really...not definitetively...
My dad was into gymnastics pretty much entirely ( a little into figure skating ). not baseball or football. bowling a little as a " do it " sport, not a "watch it " sport. The only "watch it " sports us kids did ( only had 1 tv ) was gymnastics and skating olympic stuff mostly but some other competitions too.
Gymnastics is weird in a way...( as was my father ). It is extremely personal ( about beating your "self" ..doing better than you did " before" ).. very individualistic ...even though you are on a " team "... it's just points mostly for the team to win , accumulation of individual scores... father was very anti weight lifting, very opinionated about these things to his kids... so even when I got into wrestling, for example, or football ..in high school, he was very critical of any weight lifting that was part of the practice and training. He " coached " or " taught " gymnastics on Saturdays at my high school in a sorta unofficial (unpaid ) position...so me and my brother got sorta hooked into that more than doing football, wrestling etc. In fact, we started doing gymnastics when we were like 1 year old.. and it is so stated in some newspaper clipping by howard cosell (when he was a newspaper columnist before radio ) interviewing my father after a ny athletic club gymnastic competition ( trials for olympics sorta thing )... " Yes, Howard, I have 3 children, and they are already doing floor excercises and some tumbling... kirk, age 3, rodney age 2, and susan age 1 .... " that sorta thing. We were famous !
We could roll on the floor with pet dog real good !
This gives you general idea how I never got into "watching" football seriously, or baseball...I am basically ( like my brother ) a sport idiot re: following football and baseball like normal american kids. Of course I did follow favorite teams for a while in high school... ( oakland raiders were my favorite with a couple other teams kinda floating in and out of my interest ) but I have only been to 2 pro baseball game, never to any pro football game, and only 1 college football game ( army navy as guest of family who's son went to west point .. they got season tickets and tailgate spot etc ).
Baseball games were 1 polo grounds where the only thing I remember is having a hot dog and I dropped my plastic thing of mustard and for some stupid reason stomped on it... and it squirted mustard like it was shot from a canon onto this lady's leg ( stocking ).. and she yelled at me and I felt bad and said I was sorry and she tried to get it off but I think her leg was stained with mustard forever.
Other baseball game was yankee stadium box seat next to yankee dugout roof as guest of guy who's brother in law owns the boxes complete with free parking nearby and tickets to some yankee club after games. fancy seats ( 4 of them ). I put my beer on the roof of the yankee dugout, it was like right in front of me. I got a ball thrown to me by a yankee after pre-game practice ( as they came to dugout to start game ). Actually he faked me out at first...went to throw, I ( startled by his hand action ) put my hands up fast to catch.. but he didnt throw ( like faked me out )... but then as he disappeared under dugout roof his hand came up and flipped the ball right to me ( which of course I caught since I am so quick with my reactions due to rolling with dog when 2 years old ).
So thats my only baseball story of any interest. It was the game " after" the boston yankee game with the pine tar incident in boston with billy martin.. so this was the next day IIRC in ny with boston again... yankees won. and didnt have to do tricky stuff to win ( like complain about pine tar ). The mustard story doesn't get told often.
So now you know that I am a total idiot re: sports in general due to total immersion in gymnastics, and most of THAT was just doing it, not following particular athletes ( though of course some became sorta famous at the olympics etc ) We had high bar and parallel bars IN THE BACK YARD ! LOL... I once saw a friend try a giant swing ( we had no mat.. just grass ) and fly off and landed about 20 feet away ... he let go cause all the skin on his girly hands got ripped off as he was twirling around... goes to show you... be careful when trying new things.
His eyes had rolled up into his head so you could only see " white" for a little while... but then he came back to life ( whew ! ) . We quit for the day doing gymnastics.
Sooo, in answer to your question.. given my idiocy about these matters.. the Jets ( from Titans at polo grounds and 1 season I think at the new Shea Stadium --where the METS were ) with change in ownership and all that going on... could have been from west side story ( cause I think there's a long history of some stadium dreams over on the west side of manhattan ( which would be a total nightmare for traffic by the way ) ).. and since it rhymes with METS maybe.. and also maybe because when you go to shea stadium all you can hear most of the time are GIANT JETS FLYING LOW OVERHEAD on way to and from LaGuardia Airport which is like 100 feet away from home base.
A lot of New Yorkers liked the Jets at first because Joe Namath go them to the superbowl and won, much to the surprise of everyone on earth and mars too.. but really because it was a ny stadium instead of NJ ( everyone in NY makes fun of people in NJ ). The giants suffer for this cause a lot of people call them the NJ Giants. And now ( of course ) a lot of people call the Jets the NJ Jets too... since they left shea stadium ( which was a mess because they had to go on road games till the METS were done playing baseball...and then that stadium on the west side got blackballed again by a couple lawmakers in Albany ( they actually OWN the city and state, Sheldon Silver and some other guy ). Im not really up on that whole history of west side stadium but in part the cablevision guys who own madison sq garden dont want competition. They got it with the javits center for conventions but not for sports teams.. so I guess they're happy for now.
Now we got citi field and met life field and will probably rename the midtown tunnel " JP Morgan Tunnel " soon... but as I say, .... I don't go to any of these games and travel as little as possible so who cares.

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How does mpxio compose device names?

I'm just migrating from Hitachi DLM to mpxio for multipathing, and one issue for me are the cryptic device names mpxio uses.
I know how to find out the storage box and lun number via mpathadm / luxadm, but is there no easier way?
Can I somehow configure mpxio how to construct the device names?
With HDLM, the devices were /dev/dsk/c5t(box_WWN)d(host_lun)s0, with mpxio it seems to be /dev/dsk/c5t(long_random_number_string)d0s0..
I don't feel like reading the OpenSolaris sources for hints what this string consists of, but currently this seems to be the only option as documentation seems to be nonexistant.
Can anyone provide some insights?

I think I wasn't precise enough..
You are partially right, for local FC/SAS drives, the target string is the WWN
c10t5000C50007F846CBd0s0 -> ../../devices/scsi_vhci/disk@g5000c50007f846cb:a is the internal first disk on my T5220
but for FC-AL attached storage boxes, it becomes rather random-looking..
c10t4849544143484920373730313133343130333331d0s0 -> ../../devices/scsi_vhci/ssd@g4849544143484920373730313133343130333331:a
Logical Unit: /dev/rdsk/c10t4849544143484920373730313133343130333331d0s2
Vendor: HITACHI
Product: DF600F
Revision: 0000
Name: 4849544143484920373730313133343130333331
Initiator Port Name: 2100001b320fa84c
Target Port Name: 50060e801002c4d0
... I don't see how the WWNs in that path should be represented in the target name..

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Find monitor instance name , device name , resolution and frequency of multiple monitors (VGA and HDMI)

hi,
In my system multiple monitors are connected (VGA and HDMI). In need to know the
monitor instance name , device name , resolution and frequency of each monitor.. any solution?
i used wm class 'WmiMonitorConnectionParams' to determine Video output technology connection type and InstanceName.
But i didn't get the device name , resolution and frequency of each monitor.??
There are other wmi class like :
WmiMonitorBrightnessEvent
WmiMonitorConnectionParams
WmiMonitorRawEEdidV1Block
WmiMonitorListedFrequencyRanges
WmiMonitorDigitalVideoInputParams
WmiMonitorAnalogVideoInputParams
WmiMonitorID
WmiMonitorBrightnessMethods
WmiMonitorBasicDisplayParams
WmiMonitorColorCharacteristics
WmiMonitorDescriptorMethods
WmiMonitorListedSupportedSourceM…
WmiMonitorBrightness
WmiMonitorColorXYZinCIE
WmiMonitorSupportedDisplayFeatures
WmiMonitorBasicDisplayParams
Win32_VideoController
Win32_VideoConfiguration
Win32_VideoSettings Win32_DisplayControllerConfiguration
Win32_DisplayConfiguration
But unable to determine monitor having its corresponding values? please help me to find a solution .
is there any other method to get multi monitor details?
thank you

Hi sumith,
I read some documents about WmiMonitorConnectionParams class, it should be able to get the video putput technology by the D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration.
D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration
So what happens when you are using WmiMonitorConnectionParams class? What prevent you? Anyway, please see a example of using WmiMonitorConnectionParams class, maybe you could get some hints on it.
http://stackoverflow.com/questions/10085900/querying-wmi-for-d3dkmdt-video-output-technology
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Have ordered Photoshop Elements 12 and Premiere Elements 12 (for MAC, EN version). Order went through but finally order was cancelled as Adobe Store was unable to approve. Subsequently order was cancelled. did anybody experience the same issue and how to

Have ordered Photoshop Elements 12 and Premiere Elements 12 (for MAC, EN version). Order went through but finally order was cancelled as Adobe Store was unable to approve. Subsequently order was cancelled. did anybody experience the same issue and how to proceed.

Hi there
Please check with your credit card issuer to see why payment is not being approved. When this is resolved you should be able to place a new order.
Thanks
Bev

My iPhone randomly turns off by itself with battery remaining. I can turn on the iPhone by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

My iPhone randomly turns off by itself with battery remaining. I can turn it on the by hard restart. But sometimes it turns on at fifth, sixth, or more try. did anyone have this problem? and how can I fix it?

When my phone was off it wouldn't connect to iTunes, i got it working now though. I just had to hold my lock button and my home button down long enough. Thanks anyways though!

Dose the serial number need to be changed and how when selling Adobe Photoshop Elements 9

Dose the serial number need to be changed and how when selling Adobe Photoshop Elements 9

No, the serial number goes with the product. You should deactivate all your installed copies before selling it. Also, if you've used it qualify for upgrade pricing on a later version you can't sell it. Well, you could but the new owner won't be able to install it.
Adobe does have a license transfer document, but not many people bother with it:
Transfer an Adobe product license

I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

Go to Mail Preferences
Click on the General tab
Set "Check for New Messages:" to "Every Minute"
Hope this helps

How did my Nano device name change? And how do I chnage it back?

Similar Messages

Maybe you are looking for