How differ? Working serial vi and not working serial vi
Finally I found a well-working vi file in the internet. Even though it is too long
time ago, I'm not sure the original writer would still be a LabVIEW user now.
But I'd like to say thank him (his ID was roiht).
The attached file is done by roiht and working well. But I don't know why the
basic serial read and write vi is not working but the attached file working.
There is no framing error message in this vi. Can anyone give me the answer?
Attachments:
Serial_general.vi 55 KB
Serial communications often involve a bit of magic or luck. Many vendors do not completely specify their communications protocols or they create protocols which are so different from the most common ones that it is difficult to determine what needs to happen.
Since you have a program which will communicate, you need to dig through it to document exactly what it actually does. Every setting. Especially default settings. Every delay. Every byte transmitted or received. Do not assume anything - verify. Then you should be able to set up the modern program to work the same way.
Lynn
Similar Messages
-
Simple Query working on 10G and not working on 11gR2 after upgrade
Hi Folks,
This is the first time i am posting the query in this Blog.
I have a small issue which preventing the UAT Sigoff.
Simple query working fine on 10.2.0.1 and after upgrade to 11.2.0.1 its error out
10.2.0.4:
=====
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1;
COUNT(*)
1
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=00001;
COUNT(*)
1
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1;
ATTRIBUTE1
00001
11.2.0.1:
=====
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1
ERROR at line 1:
ORA-01722: invalid number
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=00001
ERROR at line 1:
ORA-01722: invalid number
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='1';
no rows selected
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='00001';
COUNT(*)
1
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='00001';
ATTRIBUTE1
00001
++++++++++++++++++++++++++++++++++++++++++++++
SQL > desc APPS.HZ_PARTIES
Name Type
======== ======
ATTRIBUTE1 VARCHAR2(150)
++++++++++++++++++++++++++++++++++++++++++++++
Changes:
Recently i upgraded the DB from 10.2.0.4 to 11.2.0.1
Query:
1.If the type of that row is VARCHAR,why it is working in 10.2.0.4 and why not working in 11.2.0.1
2.after upgrade i analyzed the table with "analyze table " query for all AP,AR,GL,HR,BEN,APPS Schemas--Is it got impact if we run analyze table.
Please provide me the answer for above two questions or refer the document is also well enough to understand.Based on the Answer client will sigoff to-day.
Thanks,
P KumarWhiteHat wrote:
the issue has already been identified: in oracle versions prior to 11, there was an implicit conversion of numbers to characters. your database has a character field which you are attempting to compare to a number.
i.e. the string '000001' is not in any way equivalent to the number 1. but Oracle 10 converts '000001' to a number because you are asking it to compare to the number you have provided.
version 11 doesn't do this anymore (and rightly so).
the issue is with the bad code design. you can either: use characters in the predicate (where field = 'parameter') or you can do a conversion of the field prior to comparing (where to_num(field) = parameter).
I would suggest that you should fix your code and don't assume that '000001' = 1I don't think that the above is completely correct, and a simple demonstration will show why. First, a simple table on Oracle Database 10.2.0.4:
CREATE TABLE T1(C1 VARCHAR2(20));
INSERT INTO T1 VALUES ('1');
INSERT INTO T1 VALUES ('0001');
COMMIT;A select from the above table, relying on implicit data type conversion:
SELECT
FROM
T1
WHERE
C1=1;
C1
1
0001Technically, the second row should not have been returned as an exact match. Why was it returned, let's take a look at the actual execution plan:
SELECT
FROM
TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,NULL));
SQL_ID g6gvbpsgj1dvf, child number 0
SELECT * FROM T1 WHERE C1=1
Plan hash value: 3617692013
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | 2 (100)| |
|* 1 | TABLE ACCESS FULL| T1 | 2 | 24 | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter(TO_NUMBER("C1")=1)
Note
- dynamic sampling used for this statementNotice that the VARCHAR2 column was converted to a NUMBER, so if there was any data in that column that could not be converted to a number (or NULL), we should receive an error (unless the bad rows are already removed due to another predicate in the WHERE clause). For example:
INSERT INTO T1 VALUES ('.0001.');
SELECT
FROM
T1
WHERE
C1=1;
SQL> SELECT
2 *
3 FROM
4 T1
5 WHERE
6 C1=1;
ERROR:
ORA-01722: invalid numberNow the same test on Oracle Database 11.1.0.7:
CREATE TABLE T1(C1 VARCHAR2(20));
INSERT INTO T1 VALUES ('1');
INSERT INTO T1 VALUES ('0001');
COMMIT;
SELECT
FROM
T1
WHERE
C1=1;
C1
1
0001
SELECT
FROM
TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,NULL));
SQL_ID g6gvbpsgj1dvf, child number 0
SELECT * FROM T1 WHERE C1=1
Plan hash value: 3617692013
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | 2 (100)| |
|* 1 | TABLE ACCESS FULL| T1 | 2 | 24 | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter(TO_NUMBER("C1")=1)
Note
- dynamic sampling used for this statement
INSERT INTO T1 VALUES ('.0001.');
SELECT
FROM
T1
WHERE
C1=1;
SQL> SELECT
2 *
3 FROM
4 T1
5 WHERE
6 C1=1;
ERROR:
ORA-01722: invalid numberAs you can see, exactly the same actual execution plan, and the same end result.
The OP needs to determine if non-numeric data now exists in the column. Was the database characterset possibly changed during/after the upgrade?
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc. -
FlexUnit is working with FlashBuilder and not working with Build file
Hi
I have few flexunit test cases . When I am running those testcases from Flashbuilder FlexUnit plugin I am able to run all the testcases and when I run Build file to run those testcases , build file is launching my testrunner swf file and it is throwing follwoing runtime error in flash player
VerifyError: Error #1014: Class flash.events::NativeWindowBoundsEvent could not be found.
at flash.display::MovieClip/nextFrame()
at mx.managers::SystemManager/deferredNextFrame()
at mx.managers::SystemManager/preloader_preloaderDocFrameReadyHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/timerHandler()
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
here is the Build Console log
[taskdef] Could not load definitions from resource flexTasks.tasks. It could not be found.
test:
[mxmlc] C:\Users\user\Documents\workspace\project\bin-debug\projectTestRunner.swf (1626331 bytes)
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [C:\Program Files\Adobe\Adobe Flash Builder for Force.com\sdks\4.5.1.21328]
[flexunit] haltonfailure: [false]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] command: [C:\Program Files\Adobe\Adobe Flash Builder for Force.com\sdks\4.5.1.21328\runtimes\player\10.2\win\FlashPlayerDebugger.exe]
[flexunit] port: [1024]
[flexunit] swf: [C:\Users\user\Documents\workspace\project\bin-debug\projectTestRunner.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [C:\Users\user\Documents\workspace\project\report]
[flexunit] Setting up server process ...
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Entry [C:\Users\user\Documents\workspace\project\bin-debug] already available in local trust file at [C:\Users\user\AppData\Roaming\Macromedia\Flash Player\#Security\FlashPlayerTrust\flexUnit.cfg].
[flexunit] Executing 'C:\Program Files\Adobe\Adobe Flash Builder for Force.com\sdks\4.5.1.21328\runtimes\player\10.2\win\FlashPlayerDebugger.exe' with arguments:
[flexunit] 'C:\Users\user\Documents\workspace\project\bin-debug\projectTestRunner.swf'
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
BUILD FAILED
C:\Users\user\Documents\workspace\project\build\build.xml:33: The following error occurred while executing this line:
C:\Users\user\Documents\workspace\project\build\build.xml:175: java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
Many thanks for In advance for your help ..We had a similar problem in my project. Took a lot of research and trial and error, but we finally narrowed it down to the resource.properties file. Turns out that if the file gets too big it causes this problem. Extending the timeout doesn't help. You have to break your resource.properties into more granular files to reduce the file size. This seems to fix the problem. We have had it happen several times since then and we know how to fix it, so we get it fixed pretty quickly.
Not sure if this will fix your problem, but it fixed ours. -
In Flex application functionality is working sometimes and not working sometimes..
Hi,
Please help me on this..
In my flex application some functionality is working some times and not working sometimes..
In my project i have 5 sections with 5 separate screens..Each screen is of one diffeent module.
After logining into the application:
I will go to one screen..First time every functionality is working in that screen..
Ex:: I have a screen with datagrid.From that user will select one job name from datagrid click on next button..
Based the job name the user selected i have to display some information in next screen and customer names.customer names is a combo box..
below is the code:::
public function populateAllOEMCustomers(event:ResultEvent):void
1) var object_CustomerList:CustomerList = event.result as CustomerList; //Assigining result object values to Object reference variable.
2) var allOEMCustomersCollection:ArrayCollection = new ArrayCollection(); //Declaration ArrayColliction referance variable.
3) var i:int=0;
4) var customerComboLabel:Label = new Label();
5) for (i = 0;i < object_CustomerList.arryCollCustName.length; i++)
var strCustName:String = object_CustomerList.arryCollCustName.getItemAt(i).toString();
var strCustId:String = object_CustomerList.arryCollCustId.getItemAt(i).toString();
customerComboLabel = new Label(); //Dynamic declaration of label.
customerComboLabel.name = strCustName; //Assinging the customer name to the Label name field.
customerComboLabel.text = strCustId; //Assingning the customer id to the Label text field.
allOEMCustomersCollection.addItem(customerComboLabel); //Adding Lable into the ArrayCollection referace variable.
//customerComboID.selectedItem = "--";
OEMCustomersComboID.dataProvider = allOEMCustomersCollection;
OEMCustomersComboID.selectedItem = -1;
This functionality is working fine when i visit to this screen first time..If you go back to another screen and come back to this same screen and click on next button this time customer names combo box has no customer details..I am getting Nullpointer Exception and it is showing the line number 5( i have given the number for code given above..)
If i change the first line of the code to below code:: every time the above functionality is working fine.Not getting any error msg..
var object_CustomerList:Object= event.result ;
If i type cast it to specific class(CustomerList) ,functionality is not working ..getting null pointer exception..If i type cast it to Object everything is working fine..In my code wherever i have typecasted it to specific class functionality is not working(gettingNullpointerExcepion).
Please help me on this..I am not getting what could be the reason..
I am using::Flex 3,Flash player 10.1
Thanks in advance..
Regards,
SatyaHi Satya,
This sometimes as in your case might not work as the way you have specified the RemoteClass attribute in your AS class. As somtimes there may be a case as before it is mapped to a server side you are returned the data and so that you may not get the data as your Custom class but as normal Object type.
So in order to avoid this you can map the server side class to AS classes in the PreInitialize handler itself as shown below:
Specify the preinitializeHandler in your main application and write the below function.This way also you can map AS classes with the server side. So that you will not have any problem referring your application as AS class types.
You can use the same line for registering all the classes. By using this you can remove all the [RemoteClass] attributes on all AS classes and include it at single place.
preinitialize="onPreinitialize()"
private function onPreinitialize():void
registerClassAlias("com.expeditor.ScriptAdmin.Objects.CustomerList", CustomerList);
Here in the above line of code the string in quotes refer to the namespace of the Server side class and the latter is your AS class. Also dont forget to import the namespace of the corresponding AS class in the file.
Try this and let me know..
Thanks,
Bhasker -
I have CS5 photoshop extended on my mac home computer. I had it also on my mac laptop. I deactivated it from my old laptop and tried to install it on my new laptop and the serial number would not work. Any thoughts?
David o"bryan did you migrate/transfer any files/folders/applications to the new Mac laptop? You can verify that your serial number is valid by checking under your account at http://www.adobe.com/. You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
-
My Photoshop Elements serial number is not working? The CD says it is for Windows XP/ WIndows VISTA...and my currest OS is Windows 7? Is that the issue?
This is a question for the Photoshop Elements forum: Photoshop Elements. A moderator may find and move this to the correct forum for you.
Benjamin -
I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???
Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR -
Last night I bought Adobe XI Pro and this morning the serial number does not work.
Last night I bought Adobe XI Pro and this morning the serial number does not work. [removed by moderator]
You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/ -
Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards VickiThe trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser. -
I bought a new IPHONE from apple reseller and the earpiece is not working.
There is no sound .Speaker and headfone are working but earpiece is not working.
How can i get it replaced.You can get service information on this web page.
Regards. -
My serial number will not work because it is letters and numbers...
My serial number will not work because it is letters and numbers but I can't type letters into the boxes on the Adobe installer.
I've tried holding shift, putting caps lock on, and leaving it lower case. It just won't let me type letters into the boxes. Is there a work around or some other solution?Redemption Code Help
Mylenium -
Just bought iworks and the serial number is not working. help!
just bought iworks and the serial number is not working. help
How did you buy iWork (no 's', capital 'W')?
If you downloaded the trial version earlier, and have since purchased a serial number, iWork will ask you for the number the first time you launch one of the iWork applications after the trial period ends.
If you bought a retail box, or bought the individual applications through the Mac app store, no serial number is needed, but if any part of the trial version is still installed on your computer, you'll get a request to enter a serial number before proceeding.
In the last case, you must delete all traces of iWork and it's applications (but not the documents that you have created and saved), then reinstall the purchased versions from the DVD or from the app store.
For the simplest and most efficient means of deleting the trial version, go to Yvan Koenig's iDisk, then to:
for_iWork > iWork 09 > uninstall iWork 09.zip
Unzip the file, open with Script Editor and run.
Regards,
Barry -
I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other
If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene -
installing microsoft office for mac and getting prompt for installer password. i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?
You don't use your Apple ID or its password to install anything on your Mac. You use the admin account's name and password.
Use the name and password you last entered when resetting them. The "name" you use is not the short name of the admin account folder.
For example. If you create an admin account of John Smith, the short name given to that account's folder will be johnsmith. So when an app requests an admin name and password to install something, the admin name you enter is John Smith, not johnsmith. -
I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working. It has not worked for anybody who bought it. Why is it off of the app store now and how do I get my money back?
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
Maybe you are looking for
-
How do I get InDesign CS5 to stop changing my font to Minion Pro?
With no document open, the font says Times New Roman, so that should be the default. However, pasting text into a text box from another program like Open Office Writer and then adding a carriage return (normal Enter, not Shift+Enter) causes the font
-
Question about comparing an array of names to a hash table
I'm still learning Powershell but feel like I have the basics now. I have a new project I'm working on and want some input as the best way to do this: The Problem: Let's say you have a list of several hundred video game titles and the dollar value of
-
Yesterday, I had bought myself an ipod touch and it was working just fine until today when I went along with an itunes prompt to update my ipod. It failed to update and now won't recognize it, I checked to see if it was recognized by my computer--an
-
OCIEnvNlsCreate() failed: OCI8+PHP+Linux+Oracle 11g
Hi All, I've been struggling with this since 3 days. I'm getting the following error while using oci_connect: Warning: oci_connect(): OCIEnvNlsCreate() failed. There is something wrong with your system - please check that LD_LIBRARY_PATH includes the
-
Why would my home sharing stop working
my home sharing from my desk top to my laptop stopped working. can someone tell me why it stopped. cant get my itunes library copied to my laptop