How disable track position function in iTunes 7?

This function is driving me crazy and I can’t seem to be able to disable it!
iTunes remembers the how far along the song was played before I skip it. This means when the song plays again it comes in half way through.
I’m a woman on the verge make, please make it stop!
Thanks

correct,
GET INFO > OPTIONS > check or unckeck "Remember Playback Position"
You can do this in mass as well. Look for the option near the bottom of the edit window.
I love this new feature myself.
J.

Similar Messages

Disable Auto Add function in Itunes

Hey.
I have a lot of recordet phonecall in my document folder.
Whem i lisen to this file in itunes it automatic add the reference to my itunes lib.
Is it posible to disable this function and how?
When i lisen to music with some guests it is not clever to share my work calls with them...
Christian

I guess trashing iTunes worked. It will ask where is iTunes, just redirect to an application like finder, and it stop launching whenever I have to create / convert movies.
Not the greatest solution, but will do until someone posts a way of turning that feature (or seems to be a script) off.
PS: keeping a copy of iTunes in any hard drive or location will launch iTunes again.
Message was edited by: JayceAnderson

How to track position of motor using LabVIEW?

I have created a VI in LabVIEW that will allow me to control a motor to turn a certain number of degrees and then the motor will provide me with feedback on its final position. For example, I ask it to turn 180 degrees and it will output 180 degrees on the screen when it reaches its destination.
Is there a way to track the motion of the motor as it turns second by second? For example, at 1 second it is at 30 degrees and 2 seconds 75 degrees, etc. I would like to display this information in a chart/graph or table.
Any help would be greatly appreciated.

You can try use chart and wire its input with the output of the motor and put the whole in a loop.

What would possess Apple to disable the Genius Function in iTunes 11

I bought more great music that way than any other way possible. But now there are NO recommnedations from the iTunes store for the songs I owe.
The first thing I always did after purchasing a new song was to see what the other recommendations were and that would always lead to the discovery and purchase of more music! *** were they thinking!!! SO FRUSTRATING!!!!!

Inquisitive, The link you used is for iTunes feedback. Try again to iTunes Customer Service. Make clear that the track is defective and that you request a refund.

HT1212 How do I reset my sons Ipad, when its states that its Disabled and to connect to itunes, and when I do its states that its locked and I need to entre that password, but I cant because its DISABLED!

How do I reset my sons Ipad, when its states that it's disabled and to conect to itunes, and when I do i get a message thats that says I need to entre a password, but I cant as the Ipad is Disabled

Ive found the solution,
TillyLove13 wrote:
Sorry to hear, I am having the same issue myself, I entered a new passcode last night after i synced the new ios 7 cant rememeber my numbers all i remember is i used 2 and 3 and i got it to where i disabled my ipad. I used the connect to itunes as my restore but its not giving me any options thats helpfull it says restore and update im thinking maybe wipe my ipad and than put the new ios 7 in but nope seens mine was synced yesterday it only restores it back to previous locked position. im trying to get some way around it myself as soon as i find out ill make you aware. good luck. im sorry your probably just as flusterated as me

How to connect my ipod to itunes if my ipod is disabled and my top button is broken

how to connect my ipod to itunes if my ipod is disabled and my top button is broken

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?
Thanks

I tried Notpod but can't get it to work. Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+). I also can't do this in Windows Explorer. Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
The error mesag I get in Notpod is:
"Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit the application will close immediately.
InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
Thanks anyone who can help

How to Disable battery charging Function?

Hi;
I have a question about charging funtion of my "HP Compaq Business Notebook, 6720s":
How can I disable "battery charging" function in windows 7? Is there any "advanced setting change" or "software" that while battery is in its slot, stop my notebook from charging its battery?
Thanks

After some days trying many methods, yet I haven't find a solution to my problem. Then I ask is there any one
knows which software should I download for HP Compaq Power Management (similar to the software that Huffer
mentioned, but that was for Lenovo) or which registery or BIOS change should I do , so that I can manually disable
charging function of laptop, or at least put a starting level that up to that level, laptop won't start
autolatically to charge battery, because in this manner once that my Battery reaches to below 100%, instantly begin
to be charged & it would decrease its life time. Please consider that because of my power cable is to some damaged, sometimes it suddenly disrubt & cause my laptop abruptly shut down, then necessarily the battery would always be connected tob prevent this suddent effect.
If any one could help me, I would appreciate him a lot.
Regards

Okay so my ipod got disabled, so i had to restore it and i was wondering how to get my music from itunes to my ipod?

okay so my ipod got disabled, so i had to restore it and i was wondering how to get my music from itunes to my ipod?

You can sync it to your iPod by:
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod.... and follow the instructions.
You can also redownlaod iTunes purchases directly to the iPod by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I need to disable Match Services - but my iTunes crashes when I try to load it. How do I get Apple Support to disable it on my behalf?

I need to disable Match Services - but my iTunes crashes when I try to load it. How do I get Apple Support to disable it on my behalf?

Hi axostech!
Here is an article that will help you troubleshoot this issue with your iTunes crashes so that you can adjust your iTunes Match settings as you desire:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

How to disable the purchase function?

Anyone know how to disable the purchase function from the ipad2? How to disable and empty the payment credit card inform? If not, is it secure?

None for payment
After establishing the Credit Card account (i.e. after you have made purchases), you can remove the credit card information by editing your payment info, choosing "None".

Ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

How come some previously downloaded tracks wont play in itunes 11.1.3, and there is no option to download again

How come some previously downloaded tracks wont play in itunes 11.1.3 and there is no option to download again?

Hey KMK14,
I understand you are having issues with a few tracks in iTunes. The best troubleshooting step may be to delete the song from your library, and re-download using iTunes in the Cloud (if available in your country).
For more information, see the following:
Songs in iTunes may not play back completely
http://support.apple.com/kb/TS4357
Symptoms
Occasionally, if a song purchased from the iTunes Store on a Mac or PC was not downloaded completely, the song may not play back fully. The song may abruptly stop during playback, and iTunes may start playing the next song in your library or playlist.
Resolution
If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
1. Delete the purchased song that is exhibiting the problem from your iTunes library.
2. Click on the Purchased link in the iTunes Store to view your previously purchased music.
3. Download your previously purchased song from this list.
Note: iTunes in the Cloud, which allows you to download previously purchased songs from the iTunes Store, is not available in every country. Learn if iTunes in the Cloud is offered in your country.
Thanks,
Matt M.

How to Track App Download by adding CID as a parameter in iTunes URL?

Hi,
I want to track my application download by passing CID (Campign ID) as a parameter in iTunes URL. The delegate method which i am using to fetch the parameter is:
- (BOOL)application:(UIApplication *)application openURL:(NSURL *)url sourceApplication:(NSString *)sourceApplication annotation:(id)annotation
Can you please help me how to track campign ID so that i can save it?
Please help
Thanks.

The sample campaign url which i am using: https://itunes.apple.com/us/app/ye-jobs/id930911192?mt=8&cid=20402
Is this a correct way to create a campaign URL?
Please reply.
Thanks

How to disable Save & Print functionality in PDF form?

Hi,
This is the requrement, client need to disable Save & Print functionality in PDF form. (They not allow employee save & print the hrforms payslip)
May I know how to do it. Thank you.
What is the parameter value in structure SFPOUTPUTPARAMS that I need to set in order to disable Save & Print functionality ?
call function 'FP_JOB_OPEN'
    changing
      ie_outputparams = SFPOUTPUTPARAMS
    exceptions
      others          = 1.

Hi Nayan,
I'm the person who did the WD as well, using IFrame to contain the PDF binary. WD site didn't contro the binary source.
I pre-define the 'FP_JOB_OPEN' before calling the PDF generation.
Optional: Set output parameters
gs_outputparams-nodialog = ''.
gs_outputparams-preview   = ''.
gs_outputparams-getpdf    = 'X'.
gs_outputparams-nopreview = 'X'.
gs_outputparams-noprint   = 'X'.
gs_outputparams-noarchive = 'X'.
gs_outputparams-nopributt = 'X'.
gs_outputparams-arcmode = '1'.
gs_outputparams-noarchive = 'X'.
Open print job
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = gs_outputparams
    EXCEPTIONS
      OTHERS          = 1.
Regards,
Eric

How disable track position function in iTunes 7?

Similar Messages

Maybe you are looking for