How display possible batch numbers according material number in cv04n

Hi All,
cv04n -->clasifications,  there is fields availables like batch number, material number.
initially in batch number field not available f4 help, material number f4 help is available.
my requirement is create f4 help for display possible batch numbers, for this i create zfunction module and done f4 help for batch numbers.
but first enter material number then display batch numbers whenever click f4  according material number.
in my zfunction module how i know user which material number entered.
how display, please give me solution with coding.

Check following customizing:
Logistics General --> Batch Management --> Specify Batch Level and Activate Status Management
If you want to change the batch level, you have to start conversion to activate the change.
Note that you cannot reset conversion from plant level to a higher level, read the documentation for customizing of
"Specify Batch Level and Activate Status Management".
If you want to work with same batches for different materials, you should use "Batch unique at material level".
Logistics General --> Batch Management --> Batch Number Assignment
Here you can define how the system should create batch numbers.
Best Regards, Dirk

Similar Messages

  • How to remove leading zero from Material Number

    Hello Everyone,
    I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
    Is there any setting in query desinger to handle this issure or in the backend.
    Need your inputs.
    Thanks,
    Lasya.

    Hi
    you can use the function Module
    CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
    to test this go to SE37  --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
    >display -
    > F8
    in the input give 000000456
    and execute
    the out put will be 456
    for getting Zeros you can use
    CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
    Santosh
    Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
    Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM

  • How to Change Batch Classification of material master

    Hi,
    How to Change Batch Classification of material master  in a production system,Pl note that there is no stock and no open qty still system is not allowing me to delete the old Classification and add my new classification.
    Guys any solution for this.
    Thanks in advance
    rgds
    bijaya pradhan

    I believe there is a FM VB_CHANGE_BATCH for this, any body tried this FM?

  • How to Setup Batch Management Level (Material vs Client)

    Hi Experts,
    I had a question about the level at which I should be setting up Batch Management. The requirements that we have are:
    - We want uniqueness in the batch being created.
    - We have split valuation active at the Batch Level.
    Hence, we have nailed down to the following 2 options: 1. Client level or 2. Material level. (I know that I will not be using Plant level because we do a lot of STO's and we do not want to lose the characteristics in the Batch at the plant level. So the plant level is out of scope.)
    Client Level: Although the client level gives us the uniqueness and supports most of our requirements, my fear with going at the client level is that it is too rigid and MAY cause problems in the future. Is that true? What would be issues/ concerns that you have faced when you have had Batch Management activated at the client level.
    Material Level: If I setup the system at this level, I would like to be able to create a Batch number for a material across the entire client only once. E.g. MAT1 can have BATCH 123 only once across the whole client. MAT 2 can have BATCH 123 but the Material# and the Batch # uniqueness should be maintained thoroughly.
    I would like to try out this level but my problem is I am unable to understand and setup this level completely. I have gone through some pretty good discussion on this topic but still am unable to understand it thoroughly. The link to this discussion is (http://www.sapfans.com/forums/viewtopic.php?f=27&t=80407). If you refer to this link, it says u2013 Client/ Material Level. What does client/material level mean? Can you please help me understand it. Also, if I setup Batch management at this level, I would like the system to auto-generate numbers for me exactly as I have mentioned above. Is there a way to do so? I was trying to setup the BATCH_MAT number range object with the batch level at Material level but the system seems to always default to the BATCH_CLT level and give us numbers. Is there a way to fix the system to check the BATCH_MAT number range object and give the batch numbering per my requirements. What happens if I use the Material Level Batch management with BATCH_CLT number range object?
    Your help is highly appreciated.
    Edited by: TV_SINR on Jul 16, 2010 8:52 PM

    Check following customizing:
    Logistics General --> Batch Management --> Specify Batch Level and Activate Status Management
    If you want to change the batch level, you have to start conversion to activate the change.
    Note that you cannot reset conversion from plant level to a higher level, read the documentation for customizing of
    "Specify Batch Level and Activate Status Management".
    If you want to work with same batches for different materials, you should use "Batch unique at material level".
    Logistics General --> Batch Management --> Batch Number Assignment
    Here you can define how the system should create batch numbers.
    Best Regards, Dirk

  • Getting Batch from Packaging material Number (Batch characteristics)

    Hi Gurus,
    I've a requirement.
    i want to know the batches where the packaging material is used.
    Packaging material is one of the batch characteristics, if i assign the same packaging material number in one batch, that should not be assigned to another batch.
    I want to know in which batches the same packaging material is assigned.
    Please guide me?? which table has the links for batch, packaging material number and main material number???
    How can i find this???
    Thanks in advance.
    Adi.

    we can use the MMCL transaction/BMBC to see this.
    In MMCL we have a FM to get the Data.

  • How to print batch numbers on the AR invoice print out

    Hi Gurus;
    Here is my question; I need to be able to print batch numbers on the print out of AR invoices, I used variable 492 in PLD and I am able to see the batch numbers directly linked with the AR invoice, meaning that I wont be able to see batch numbers that I entered on the Delivery even is the delivery doc was copy to the AR invoice.
    Is there anyway that I can see the batch numbers on the AR invoice print if I entered the batch number on the delivery and then copied that delivery to an invoice??
    My client wants to be able to send their customers and invoice with a batch number but he always follow the process from sales order to delivery and delivery to AR invoice and what this means is that he always entered the batch numbers on the delivery documents.
    Please help me!!!
    Thanks
    Jenny

    If the ad hoc printer mode is not available for the envy, there are some reasonably cheap ways to get a wifi network in your car.   A cheap router from best but will generate the wifi network.  Does not matter if you have Internet or not.  A ifi device will also work, and most/ all of them run on batteries.  Lastly, if you have a smart phone or I phone that generates a wifi hotspot, that may be enough to support the printing function.  ( I need to test my I phone later today to see if that works.)

  • How can I create SC without material number only  description?

    hi,
    I have a problem . I want to create SC without material number only  description.
    How can I create SC only use description.
    Thanks for your help.

    Hi
    Use the 'Describe Requirement' option in the Shopping cart creation screen.
    Regards
    Reddy

  • How to get company code using material number

    Dear all,
              I have material number & plant on selection screen, but how do I get the company code details using MARA-MATNR ?

    HI,
    You can use a cmobination of T001K and MARC Table.
    T001K table is assignment of Plants to a company code and MARC is a table with combination of Material and Plant.
    Regds,
    Anil
    Edited by: Anil Katoch on Jul 23, 2009 6:24 AM

  • How to get Class Type form Material Number

    Hi All,
    Based on the Material Number I have to get the Class Type and Class Number.
    I tried with FM -- QMSP_MATERIAL_BATCH_CLASS_READ
    but it always shows   Class type = 023 
                            and   database table for object = MCH1 for any given material number.
    Please help me out.
    Thanks & Regards,
    Moni

    HI Moni,
    Please check these FM.
    CLAF_CLASSIFICATION_OF_OBJECTS
    CUD0_GET_VAL_FROM_INSTANCE
    CE_I_GET_CONFIGURATION
    VC_I_GET_CONFIGURATION
    VC_I_GET_CONFIGURATION_IBASE
    look for the characteristics and charactertic values in tables
    ALLOCVALUESNUM
    ALLOCVALUESCHAR
    ALLOCVALUESCURR
    if this is not working
    you can also get these information directly from the tables.
    KSSK - object class assignment
    and KSML - class characteristic assignment
    and for char values use table AUSP
    Thanks!

  • How to Remeove Batch Management in Material Master

    hi!
    I want to remove the 'Batch management* for a material
    Made stock as 0 and reversed all its relating documents.
    but its display error as
    *The batch management requirement cannot   *
    be changed for the following reasons:
                                                                                    Batches already exist.
    how to remove the Batch management
    Regards,
    Kv

    Hi
    The error tells that some documents are stii pending in previous /current posting period.
    Pl.find that through Mb 51 ( Input only plant).
    Reverse these document also and proceed

  • How to deactivate batch management at material master?

    Dear Sir/Madam,
    At the configuration,I have set "Batch Management" to be activated in plant level.  I have a problem which some of the plants do not use batch management.I understand that if you tick "Batch Management" field in material master, batch management is activated for the material in that plant.
    1. How do prevent user to tick "Batch Management" field in the material master which appears in the following views (depending on the material types):?
    - Sales: General/Plant
    - Purchasing
    - Plant data/Stor.1
    - Work Scheduling
    2. Is there any alternate way to prevent user to activate "Batch Management" in that material of their own plant despite it is activated at plant level in the configuration?
    Please advise.
    Thanks.
    Rgds,
    Esther Chong

    batch status management is just what its name says, you manage your batches with status (unreastricted use, restricted use).
    But his comes only into place after you have activated batch managment, it is not causing batch managment, it is only working with batch managment.
    Removing batch managment is almost impossible, you have to archive all batches first, to be able to archive the batches, you have to archive the production orders...creation of a new material is in most cases easier and quicker.
    Wit batch managment at plant level each plant can independently decide if a material is batch managed or not.
    if you want to restrict the entry of the batch management flag, then you have to customize your material master field selection at plant level.

  • How to put pages' numbers since different number?

    PAGES '09 ver. 4.3 (1048)
    I'm trying to put numbers of pages in the document automatically. It always starts since 1. I need to continue pages' numbers in separate document sinse another number (7, 8, 9...) in first page.
    How to change the number whicn startys counting pages in a document, if somebody knows?

    Inspector > Layout tab > Section > Start page at ....

  • How to avoid batch numbers without stock in standard searchhelp?

    Hi Experts,
    Is there any choice to limit search help values for batch number only to batches, which have stock? I don't want to see batches, which have zero stock.
    Thanks&regards,
    Jirka

    yes u can enhance the search help in se11.

  • Emergent!! Two alternative material number for one same real material???

    Hi Experts
    In our company,for some specail requirement,we want to have two material numbers for one same real
    material,that means this two materials are substitute for each other. In every transaction, we can
    use this both two material numbers.
    For example,material number "A123 " and "B456" , these two material numbers are for one real
    material, In every transaction we can use "A123 " or "B456".For exmaple ,we can create and release
    a production order to produce"A123",and when doing goods receive for this produciton order with
    MB31,we could use"B456" for the same production order. And also when we view the stock for "A123" in SAP,we could get the the sum stock of "A123" and "B456".
    Is it possible in SAP? How to achieve it that one real material have two different material number??
    And how to manage these two different material number??
    Thanks for any reply!!

    Fei,
    The requirement can't be absolutely mapped in SAP.
    The reason is the logic behind this is wrong.
    May we know why do you want to maintain two separate codes for one real material?
    We have option of batch management as well as split valuation to take care of your requirement.
    Evaluate these things.
    Hope this helps you.
    SmanS

  • Material Number In Sales Order in Change Mode

    Hi All,
        Following is my scenario.
    During creation of sales order I am taking two line items in sales order that is in sales order there are two line items.
    One item is finished product and other item is the semi finished product. Whenever I am saving the sale order Finished product material number is in change mode but the semi finished material number become in display mode.
    My question is how to make the semi-finished material number in change mode?. Any configuration.
    I can use screen variant. But one material number is coming in change mode but other is coming in grey mode.
    Note : there is no subsequent document exists.
    Regards
    Sridhar

    hi
    pls check any variant configaration is been maintained for that semi finished product
    regards
    senya
    Edited by: senya_1111 on Jul 31, 2009 1:59 PM

Maybe you are looking for