How do Adobe DPS and Hype play together? Sharing is caring.
Hi all,
This is a post to record your and my experience with Tumult Hype and Adobe DPS.
I'd like to get in touch with other users who use this productive combination of tools.
We have worked on a big folio and made some demos with Hype Animations.
One way or another we encountered some surprises along the way.
Please share your experiences here.
I'm not advertising any products from Adobe or Tumult, I just want to improve my workflow by sharing and caring
1. Adobe DPS + SVG + Hype = HUGE files
I use a lot of SVG files in my Hype animations. Makes sense right? A+ Quality, A+ Filesize.
But SVGs only work well and stay small in the browser e.g. Safari or on the iPad etc.
On our folio it seems that SVG files are converted into really big bitmaps(?) in the Adobe process (which is a mystery to me of course). The upload takes very very long, so I got curious. Are there any Adobe engineers who can shed light into this?
The "bug" above was a mistake in the process actually. There were other big files in the folder which have been uploaded with the HTML. Dang!
So then have fun sharing, I'll be updating this post now and then (mostly while waiting for the upload to finish )
Oliver Ruehl
Hello Calxoddity, Roger and Kirby,
All three of your answers were very helpful and I appreciate your time. I tried to send this reply message a few minutes ago and when I went to hit send, it said I was not logged in... I HAD been logged in so maybe it timed out. Anyway, this post comes through twice I am sorry.
I was feeling pretty befuddled with what to do, adding this topic to the decision on which computer to buy, etc. So your time and wisdom helped me to get my needs into perspective. I think I will start with the newer iphoto that comes on my imac and get PSE9 since my version of PSE is very old.. LOL and then, spend some time learning about aperture 3, since as Roger mentioned, I can import/move the files over to aperture at a future time. Since aperture 3 is the most expensive, it seems a wise move.
Oh, did read Kirby's article/post, thank you, very well written to help a newbie get a handle, and will watch the online tutorial for aperture 3 as well. And maybe it will tell me there, but right now, with iphoto I can easily email a photo and I think it will easily be shared with an ipad2. If I get aperture 3 and use it instead of iphoto, does it have an easy interface for sharing via email and/or the ipad?
Thanks again, you are great!
michelle
Similar Messages
-
On Adobe DPS and tracking.
Hello,
I am a completely new member to this community. Thank you in advance for all that may take a look at the following questions.
I am writing from the agency side of advertising. One of our clients use Adobe DPS, and our agency will soon be promoting the client's app to drive monthly subscriptions.
First question :
Once a mobile user is driven to download the app i.e. post-click through, is it possible to tie subscriptions back to the ad source through 3rd-party tracking implementation? I'm assuming the answer is no, but I would like to just double-check for reassurance.
Second question :
Once a user has accessed this digital-content through the app, is it possible for the client to get any visibility into the engagments that happen within the app?
I think it may be answered here : http://blogs.adobe.com/digitalpublishing/ <--
but I am getting different answers about this issue from different sources.
The second part to that question : if those engagement metrics are available to the client using Adobe DPS, can those measurements customized? i.e. - would I be able to track how many page views each unique user has logged? I did take a look at the MPA metrics standard but those only seem to be sending back session duration, count of sessions, etc.
Thank you again.
mikeHi Mike,
Here are the responses to your questions:
1) First question: The answer is as you suspected, "No".
2) Second question:Once the user has downloaded/installed the app then you can access to baseline analytics reports for basic reporting. You can also get access to Sitecatalyst that provides more deeper tracking. If you are entitling the users directly via direct entitltment; then yes you can track more detailed behavior on each user.
Shikha -
HOW TO USE LOGICAL AND OR CONDITION TOGETHER
Please do not post subject in ALL CAPITALS
Hi All there,
How to use logical and or condition together
I wanted to use logical AND OR condition together in where clause of Select Query.
eg where xyz and or abc
Regards
Sagar
Edited by: Matt on Mar 17, 2009 1:05 PM
Edited by: Matt on Mar 17, 2009 1:05 PMhi,
You cannot use the logical and or condition together at the same time in SQL statement. Sachin is correct while using the and and or in the same condition. You can get the data using or condition in SQL statement, and then use the delete statement of internal table using the end condition. please find the following code for the same.
select *
from dtab
where cond1 eq 'A1'
or cond2 eq 'A2'.
if sy-subrc eq 0.
delete itab where cond1 eq 'A1' and 'A2'.
endif.
regards,
Veeresh -
Plz Tell how to run videos and Google play store i...
Hi ,
Plz Tell how to run videos of facebook and dailymotion and Google play store in Nokia asha 230 dual sim .
Plz tell i am Waiting for ur Reply .
Thanks
Birdwatcher89The Nokia Asha 230 does not run Android as operating system, therefore, the Google Play Store does not work. The operating system of your phone relies on a video streaming protocol called RTSP. Dailymotion does not support that anymore. I cannot comment about your Facebook issue. Perhaps someelse can.
-
Does the updated Adobe DPS allow for videos to be embedded in the version of the publication that is meant for web sites/viewing on a MAC/PC?
DPS was recently integrated with CCM wherein you can publish as many Built in Single Edition App as you want. But to be able to built multi issue app, and a lot more publishing solution you need the Pro or Enterprise. Go through this buying guide comparisonfor more clarity. Please note, DPS integration with CCM is not a complete publishing solution. DPS with CCM is an addtional benifit for CCM users in a way.
Infact if you do just Demo alone with the Adobe Content Viewer, you don't need DPS at all. You just need Indesign CS5/CS5.5/CS6
But if you are publishing live apps to appstore, you need DPS to be able to do that. And depending on what type of content is published live, you either need DPS single edition/CCM/Pro/Enterprise.
If you are to publish just one single issue/app, Single Edition or CCM will suffice
If you are to publish mutiple Built in Single isssue app you need CCM
If you are to publish multiple multi-isssue apps you need the Pro or Enterprise -
How to set speaker and headphone volume together T540p
My new Thinkpoad sets the headphone and speaker volume separately. I am always adjusting as I use headphones and speakers at different times frequently.
I would lke the volumes to be synchronized and change both together using the volume key.
Can this be set?
thanks allOnly if you?switch to?Audio Creation, open the mode console, set the speakers as 4.0 and in the 'Multi-Channel Wave' tab enable the bus routing for Fronts and Rears in the 'Wave' column. The downside is that this will disable EAX 4/5. BTW it's better to plug the headphones in the line-out (especially if the hp are low-impedance), the opamp driving the line-out has more output current headroom.
-
How can I view and upload videos to shared photos streams on mac
I use shared photo streams alot how can I view videos uploaded to a shared photo stream on my mac
You can not at this time - tha tis only an IOS 7 and PC feature today - mayber with future software releases
http://support.apple.com/kb/TS4379?viewlocale=en_US&locale=en_US
What software versions do I need to be able view and share videos, and contribute to other people's shared streams?
iPhone, iPad, or iPod touch with iOS 7.0 or later
PC with Windows 7 or later and the iCloud Control Panel 3.0 or later
AppleTV (second generation) with Apple TV Software Update 6.0 or later
If the owner of the shared stream has turned on the Public Website option and shares the link with you, you will be able to view videos and see photos and video added by all contributors from any up-to-date browser.
LN -
Word 2010 and Adobe Acrobat Pro arent playing together nicely
Adobe keeps giving me an "unexpected error" when trying to convert a pdf from an existing Word 10 document.
I am sick and tired of all the Adobe apologists. Office 2010 has been in Beta for a year now and Adobe's programmers could not create a Acrobat 9 compatiblity fix? Give me a break!
I spent a fortune on Acrobat Pro Extended only to find out that it has limited compatibility with Office 10 and the bundled Presenter has none.
What is wrong with Adobe??
Content edited because it was not consistent with the requirements of the Adobe Community Guidelines. For more information, please see our Adobe Community Guidelines and adobe.com Terms of Use.
Message was edited by Jochem van Dieten -
How does systemd, wpa_supplicant, and dhcpcd work together? rtl8188su
I'm running arch with alarm (done a pacman -Syu to get latest everything) on an original Raspberry Pi model B.
I'm using a Belkin USB adapter which is really a Realtek rtl8188su chip, which is recognized with the r8712u module. I want to do it all from the command line (not running a GUI, as this Pi won't be having a display attached.)
The system recognizes the built-in Ethernet, and dhcpcd assigns it an IP address, so I can SSH into it and try to bring up the wlan0 interface.
I'm an old-school Linux/UNIX hacker, but I haven't had a lot of experience with systemd, nor with wpa_supplicant or even much of udev, so I'm a bit lost in trying to make this work.
I made sure wpa_supplicant and wpa_cli were installed. Then I edited /etc/wpa_supplicant/wpa_supplicant.conf to add my ssid/passphrase, and saved it as /etc/wpa_supplicant/wpa_supplicant.wlan0.conf. I also did "systemctl enable wpa_supplicant," and I've rebooted.
The status of the system is that it does not enable the wlan0 interface. Further, the wpa_cli tool does not work. If I run just "wpa_cli" or with a command like "wpa_cli list" then I get the error:
could not connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
This is weird, because wpa_supplicant is running in dbus listen mode:
[root@alarmpi ~]# ps alx | grep [w]pa
0 0 94 1 20 0 5636 1416 poll_s Ss ? 0:00 /usr/sbin//wpa_supplicant -u
Each time I boot, I get this message in /dev/log/messages.log:
Nov 10 01:40:06 alarmpi kernel: [ 648.082619] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Now, if I insted does "systemctp stop wpa_supplicant" and start it manually, it does bring up the interface:
[root@alarmpi ~]# wpa_supplicant -i wlan0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.wlan0.conf
wlan0: Trying to associate with a0:21:b7:63:a1:98 (SSID='jwatte' freq=2462 MHz)
wlan0: Associated with a0:21:b7:63:a1:98
wlan0: WPA: Key negotiation completed with a0:21:b7:63:a1:98 [PTK=CCMP GTK=CCMP]
wlan0: CTRL-EVENT-CONNECTED - Connection to a0:21:b7:63:a1:98 completed (auth) [id=0 id_str=]
[root@alarmpi ~]# ifconfig wlan0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::a86:3bff:feb4:c21a prefixlen 64 scopeid 0x20<link>
ether 08:86:3b:b4:c2:1a txqueuelen 1000 (Ethernet)
RX packets 30 bytes 3813 (3.7 KiB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 5 bytes 610 (610.0 B)
TX errors 0 dropped 1 overruns 0 carrier 0 collisions 0
[root@alarmpi ~]#
However, dhcpcd is not auto-launched to provide an IP address to the interface.
So, how is this supposed to work? How am I supposed to configure the system so that all the pieces click together? It should start wpa_supplicant with the right config data, and/or configure it over dbus correctly, and it should make sure dhcpcd is then invoked to obtain an IP address. I have *no idea* how to actually configure this to do the right thing, because all the tutorials and documentation I can find on the web is either very abstract ("services live in /usr/lib/systemd/...") or just claim that things "will magically work" if I have the correct configuration.
Help! Don't know what to do next!Your manual wpa_supplicant invocation result looks good, so the major hurdle you have taken already.
For wireless you need a management method that acts as interface to wpa_supplicant and dhcp and watches the connection. Before you browse off to archlinuxarm, also read the non-abstract introduction here: https://wiki.archlinux.org/index.php/Wi … management -
Adobe DPS and web content viewer issues
Having an issue with the tablet and web content viewer version of this particular article. I've create two separate documents one for iPad and one for iPhone, reuploaded the article and recreate the entire article all in the hopes that it would resolve the issue. Any ideas as to how I can remedy this problem? Thanks.
This is a known issue with smooth scrolling articles in the web viewer: From Digital Publishing Suite Help | DPS Bug Fix Release Notes:
"Smooth Scrolling articles in web viewer may not display properly on the last page if the length of the smooth scrolling article is not an exact multiple of the folio height. For example, the last page of a 1024x2000 article may be cropped, but a 1024x1536 (2 times the height) or a 1024x2304 (3 times the height) should display fine. The issue is especially common in portrait orientation. One workaround is to make the height of the smooth scrolling page height an exact multiple of the folio height. Another workaround is to use PNG image format for the Smooth Scrolling article instead of PDF."
Neil -
How to delete parent and child records together ?
Hi,
I'm using Jdeveloper 11.1.2.2
I want to delete a row from a table but it is showing: Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-02292: integrity constraint (TABLE1_TL_FK1) violated - child record found.So how can I delete a Child row and table row in one method ?
I cannot access the child's VO because it is not added to the AM.
Thanks,
Nigel.John, as usually, is right with the pointer to the documentation he pasted. Just to make sure you read it carefully, let me hoghlight an important point here:
"If the option is selected, then the composed entities do not perform the DELETE statement *on the assumption that the database ON DELETE CASCADE constraint will handle the deletion of the corresponding rows*."
So make sure the database is setup for cascade delete as otherwise you still will not succeed
Frank -
Hi There,
Just asking this question in advance.
I know when you submit your app, you have to tick a box indicating if you app is encrypted or not. Having created my app entirely in indesign and Viewer Builder, is there any way that it could be encrypted? I just want to make sure I tick the right box, I must admit I haven't got my head entirely around the whole 'encryption' thing.
JillianSelect No, Viewer App built with DPS does not implement cryptology and is not encrypted
-
COMPUTE function: How to get subtotals and GRAND total together?
I am wrtiting a report using SQL and SQL*Plus to get subtotals and a grand total. The COMPUTE function allows me to COMPUTE SUM on a group, but it only gives me subtotals. I'm interested in getting a report with the SUBTOTALS and a final GRAND TOTAL. Can this be done using SQL*Plus?
Here is my current code that gives me subtotals:
COMPUTE SUM LABEL subtotal OF sal ON deptno
SELECT ename, sal, deptno
FROM emp
ORDER BY deptno;
ENAME SAL DEPTNO
CLARK 2450 10
VOLLMAN 5000
MILLER 1300
8750 subtotal
SMITH 800 20
ADAMS 1100
FORD 3000
SCOTT 3000
JONES 2975
10875 subtotal
ALLEN 1600 30
BLAKE 2850
MARTIN 1250
JAMES 950
TURNER 1500
WARD 1250
9400 subtotalHere is the code to give one grand total:
Column DUMMY NOPRINT
COMPUTE SUM OF sal ON DUMMY
BREAK ON DUMMY
SELECT NULL DUMMY, ename, sal, deptno
FROM emp
ORDER BY deptno;
ENAME SAL DEPTNO
CLARK 2450 10
VOLLMAN 5000 10
MILLER 1300 10
SMITH 800 20
ADAMS 1100 20
FORD 3000 20
SCOTT 3000 20
JONES 2975 20
ALLEN 1600 30
BLAKE 2850 30
MARTIN 1250 30
JAMES 950 30
TURNER 1500 30
WARD 1250 30
29025
How can I combine both on one report?Massimo Ruocchio wrote:
Do you like this?I believe OP is looking for both department totals and grand total. Frank already showed how to do it in SQL*Plus. To do it in SQL:
SELECT CASE GROUPING_ID(real_deptno,real_ename)
WHEN 0 then real_ename
WHEN 1 then 'Department ' || real_deptno || ' total'
ELSE 'All department total'
END ename,
SUM(sal),
deptno
FROM (
SELECT deptno real_deptno,
ename real_ename,
sal,
CASE ROW_NUMBER() OVER(PARTITION BY deptno order by ename) WHEN 1 THEN deptno end deptno
FROM emp
GROUP BY GROUPING SETS((),real_deptno,(real_deptno,deptno,real_ename))
ORDER BY real_deptno nulls last,
real_ename nulls last
ENAME SUM(SAL) DEPTNO
CLARK 2450 10
KING 5000
MILLER 1300
Department 10 total 8750
ADAMS 1100 20
FORD 3000
JONES 2975
SCOTT 3000
SMITH 800
Department 20 total 10875
ALLEN 1600 30
ENAME SUM(SAL) DEPTNO
BLAKE 2850
JAMES 950
MARTIN 1250
TURNER 1500
WARD 1250
Department 30 total 9400
All department total 29025
18 rows selected.
SQL> SY. -
How to edit HDV and HD 24F together?
Please help! I just did a 2-camera shoot, on Canon HV 40s. The problem is that my partner and I were in two different recording modes: HDV and HD 24f.
I am new to HD, and really don't know much about it. What is the difference between the two modes, and will it affect the look of my project when I edit footage together from the two modes?I'd suggest using Streamclip to converty the 24F footage to the specs of the HDV camera footage.
I'm not a Canon user but I think 24F is 24 progressive.
FCE does not work directly with 24 fps.
Al -
How does PSE 11 and iPhoto work together?
I am currently trialling PSE 11. I would prefer to keep iPhoto as my organiser while using PSE 11 as my editor. However, it appears that I have to create a separate PSE library meaning that the edits made in PSE will not be reflected in the iPhoto library.
Other than manually importing and exporting photos between the libraries is there a way round this?You can change iPhoto prefs to show the PSE Editor application as the external editor. You will the get the choice when right-clicking on a thumbnail in the iPhoto Library - either Edit in iPhoto or Edit in External Editor.
The export copy will be created automatically and will show up in the iPhoto Library as a duplicate next to the original once you save in PSE after you finish editing. If you don’t want duplicates and are happy to replace (overwrite) your originals you can set up the PSE prefs to automatically save over original.
See attached link for further information.
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html
Maybe you are looking for
-
Launching a page from Oracle Applications (E-Business Suite) 11i
I have been trying to get a page in an APEX application to authenticate automatically from a menu function in Apps. I have been working from these instructions: http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_
-
i can plug it into the wall adapter and it works fine but when i try to plug my usb ipod charger into my windows to update my I.O.S it doesnt work, what can i do to solve this problem?
-
Why does iphone 5 email my photos as png? i need jpg file.
I'm trying to email photos, save to my PC then download to a photo website. This particular website only recognizes jpg as images. I've never had this problem before. Is there another way to change setting to email photos as jpg instead of png? thank
-
Commenting with Acrobat Reader 9
We're trying to create PDFs that our clients can notate comments on and send back to us for routing purposes. Our problems relate specifically to Acrobat Reader 9. Weve tried creating PDFs from InDesign and from a web browser (for our web jobs), but
-
How to use Adobe flash with iPad?
Is there a way to use adobe flash in safari with the new iPad? I am a new ipad user. Thanks