How do assign mutiple client Macs my new Printer List? What do I copy over?

The only thing that changed is our IP addresses. We moved. Same Printers & Same Macs, just new IP addresses. I want ARD to delete every clients printer list and apply my new Printer List that I created on my Admin ARD Mac. All my printers were 'Printer Browser' created under the IP Printer tab, using protocol LPD. I really don't want to login to each client Mac and do each one individually. What do I copy from local to my 46 clients?? Desparate :-P
G5 Quad 2.5 Mac OS X (10.4.10) ARD v2.2

There is a document that talks about how you can configure printers with Apple Remote Desktop. It is based on older versions of Apple Remote Desktop, but the concepts, I'm told (I've not done this) still hold true:
How to Setup 300 Printers in Just Under 3 Minutes
http://www.acc.southernct.edu/files/SetPrintersInMacOSX.pdf

Similar Messages

Hello - how do i get my mac pro to print in colour

Hello - how do i get my mac pro to print in colour - i am using HP Envy 120 and can not print in colour. when testing the printer, the printer prints in colour, but trying to print from the mac book pro - it prints in black and white. i can't find an option that

I know nothing about your printer. However, to use it properly you must Add the printer in Print & Scan preferences.
See OS X Mavericks- Set up a printer. Also, consult the printer's user manual. With the proper setup the printer should print color or b/w automatically. If you have further problems you need to start with the printer HP's tech support.

How do you install OpenRIP NT so the postcript driver displays in the mac InDesign CS6 printer list?

How do you install OpenRIP NT so the postcript driver displays in the mac InDesign CS6 printer list?

Moving this discussion to the InDesign forum. Reneeatwork I would strongly recommend that you also inquire with whatever support is available for OpenRIP as well.

How to setup Wireless Clients MAC+Active Directory based acess

Dear Gents,
I want to setup Wireless Clients MAC+Active Directory based acess on AP 1242 standalone Wireless series .
Steps i have configured :
1) SSID manger under Open authentication : Selected with EAP.
2) under advacned Radius : s
MAC Address Authentication
MAC Addresses Authenticated by:
Authentication Server Only
3) Server Manger : Current server list
added the radius ip address 10.1.200.x
EAP Authentication
MAC Authentication
Accounting
Priority 1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 2: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 2: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 2: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
From ACS - Radius we have choose a Group x( named as Mac-address group )
All the wireless Client ( laptops ) mac-address are added as add username option and enter username
as mac-address & enter the mac-address as pwd second option of password TAB.

Hi Akber,
I think you didnt understood what i was trying to say here :-( No problem..I will explain my theory again.Your requirment is to autheticate user from ACS internal database (you have already added the MAC address as the username on your ACS internal database) as well as from ACS external database (in your case this is AD).
What i was saying is when when authetication request comes to raidus server it checks its internal database and if it find a valid username and password (here it will the MAC address and password which you have entered to the ACS database) the ACS will not query the external database (in your case the AD) for authetication.
You can not have ACS to look in to both MAC and AD database at the same time.
Hope this clears your doubt.
Regards
Najaf

How to connect 10.9 Mac to USB printer via E2500 router?

So I've established that Linksys Connect software is incompatible with a Mac running OS 10.9 Mavericks.
Is Linksys Connect the only way to connect a Mac with a printer connected to the E2500 router? Or is there another way to make it work?

New operating systems and older software always have compatibly issues. Recently firmware updates have been pushed out. Maybe one will come for the E2500.
In a business environment you would normally share out the printer from a server or PC. Sharing from a router will be problematic.
How about the reverse; sharing the printer from the MAC to the PC? Do you have an old computer lying around you can turn into a Printer server? I just had a thought, there are actual printer server devices made for this as well.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

How do i load software for a new printer as i don't have a disk drive!, How do i load software for a new printer as i don't have a disk drive!

Trying to help a friend who has a Mac Air, didn't think it would be as hard, but guess it's what you're used to.
Have bought a new printer Epson SX235W, and trying to load the software and connect wireless, but the only instructions that come say to use with the Disc, but don't have a disc drive - can anyone help as to how I load and connect it please as I'm having no joy from the Epson site, despite I think loading some software - Thanks Steve

Hello Fruhulda
Clicking a Pages table don't give the same result than clicking somewhere in the table then pressing cmd + a.
The first scheme selects the table (height square handles displayed)
The second one select every cells (no handle displayed).
If we try to fill cells with a color in case 1, only standard cells are filled.
If we try to do the same in case 2, every cells (headers included) will receive the color.
Yvan KOENIG (VALLAURIS, France) dimanche 12 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

How can I make my Mac Book Pro print to a Panasonic KX-MB772?

How can I make my Mac Book Pro OSX 6.8 talk to a Panasonic KX-MB772 printer?

You can't. The KX-MB722 is one of the few remaining printers in the class of devices called "Windows Printers" that has no on-board printing software -- it relies on a host computer to provide all of the software functionality and Panasonic only provides such software for certain versions of Microsoft Windows. In this case, it means a 32-bit version of Microsoft Windows (2000-XP, though it will probably reliably on Windows versions up to 7). Note that these devices are not guaranteed compatible with future versions of Windows either (Panasonic has already dropped software support for this model).
I'm pretty sure that the device doesn't support remote printing without the software either (e.g., you can't setup a computer with Windows on it, share the printer, and then print to the shared printer without their software).

How to get past 6700 not recognizing new print heads.

Ok, so I bought a new printer that came with setup cartridges. I wanted one with network capabilites so I took it back to the store and got a new hp 6700 all in one. But when I took the other one back I forgot to include the start upcartridges in the box I took back. So this gave me two sets of start up ink. Once my first set ran out I tried to put the other set in and I got the message Cartridge problem'.
I have gone thru all the troubleshooting steps and it still won't clear. I even went so far as to buy additional brand new cartiridges. So i have now two sets of new ink sets.
I know it is due to me trying to put in the other set of startup ink. But how do I clear the message and get it to work>? I have only printed 300 sheets out of this thing and now I can't use it. And now I am out of warrenty! When I haven't used it but for 2 months. Help I am so frustrated am ready to throw this perfectly good printer in the trash! Bad product configuration not being allowed to use any HP ink that is for use for the same printer!

Hi,
Please ensure you insert a full set of Non-Setup cartridges, inserting a Non-used startup cartridge to a printer which was already initialized may cause such an error.
Any startup ink is labled with the "Setup" label, ensure all the 4 cartridges in the printer does not labled as a setup cartridge, then turn the pritner off and back on.
If you still see any issue, please clarify the exact error message as listed on teh pritner screen, including any cartridge mark which may appear (it should list a specific color icon).
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I sync so that album art work in one library is copied over to another via home-sharing? Most of the artwork has been scanned and added by me.

I have three computers, each with its own iTunes Library, but if I add material to one, every few days I make sure that it's copied over to the others via homesharing. However, some of the metadata does not transfer, specifically the album art work. So on one library, call it my Home Library, everything is nice and tidy, with album artwork where it should be. On the other two, all the albums I've painstakingly made sure are complete on the home library are missing the art work.
Any thoughts? Tune Ranger and other iTunes maintenance apps don't seem to do the job, either. Coverscout, PowerTunes and Song Sargent also fail this task.

My understanding it iTunes handles artwork several ways. First, iTunes keeps a copy of all artwork in its artwork folder. Second, artwork can optionally be embedded in a media file. You can, for example, have an album where no artwork is actually in the files but all use a reference copy in the artwork folder. Even if a file has artwork embedded it may still use the version in the artwork folder.
Embedded artwork travels with the file when you copy the file.
I am hazy as to when exactly iTunes will embed artwork and when it won't. I believe, for example, if you use iTunes to fetch artwork it will not embed it, it will just place a copy in the artwork folder. Then too I never use iTunes to fetch artwork and I usually end up with artwork embedded in a file or two per LP (each embedded copy uses up more disk space). Now, I still use iTunes 7.5 and new versions may not behave exactly the same. If it was my version and I added artwork to a file it would embed it and it would transfer. It sounds like your artwork isn't embedded even if you are adding it the same way I would (I drag mine to the little arwork display box in the bottom left corner of my window, which apparently has vanished completely in iTunes 11).
You could try this for a file:
Script for embedding artwork - http://dougscripts.com/itunes/scripts/ss.php?sp=embedart
Just remember embedding artwork adds to each file size, so if you have 1000 files and you add 2 MB of high quality scans to each track you are taking up 2 GB more of drive space.

How to assign voided cheque to the new payment document no.

Hi Experts,
A cheque no 11111 was manually assigned to a payment document no. created for a vendor X but physically another cheque no. 22222 was issued to vendor X by mistake. Later on the user issued the cheque no. 11111 phisycally lying with him to vendor Y but did not assigned this cheque to vendor Y's as this was previously assigned to vendor X. When the user came to know this, he reversed the payment document no. by voiding the cheque no. 11111 with void reason ''Inserting wrong cheque lot'' and created another payment document no for vendor X with cheque no. 22222. This way he corrected the vendor X payment document with cheque no. 22222. Now he wants to assign the cheque no. 11111 which is voided to vendor Y's payment document. Further he has issued many cheques from the cheque lot which contain the cheque no. 11111 and 22222.
Is there any way to assign the voided cheque to the new payment document no as the user wants it very desparately.
Hoping for solution.
Rgds,
BABA

Hi Shailesh,
Use FCH5 to create check information. Enter thr payment document , Company Code, Fiscal year and the house bank information to assign the check. IF the check lot having the check number has further checks assigned from it, this check lot has to be made non-sequential so that we could manually assign the check number.
Thanks & Regards
Preeju Susan

How do I upgrade three Macs to new software

My wife and I each have a Mac, plus we have a Macbook. As our download is limited to 10GB per month - and we usually get close to that, I would rather purchase a DVD with the software upgrade....if that is not available how can I share one download across our three machines? All our Macs are operating on Snow Leopard and are regularly updated.
Advice please!

Thank you both for your helpful replies.
As a non technical computer user, I am really disapointed I cant buy a physical media. One download will use nearly half of our monthly limit, and then I have to follow a procedure I am not comfortable with to update the other two. I am not sure that I will bother at the moment. We went to the Exeter (UK) store today with the intention of buying an iPad - for which I understand it is recommended to have the latest software on the Macs and find it is not simple...at present we have put the iPad on hold.
I suggest that for the sake of offering a DVD Apple have lost the sale of an iPad - at least for the moment.
I will follow the link given to study a bit more the technicalities of making a disc myself.
Many thanks

How do I network PowerBook & iBook w/new Printer?

I am considering purchasing a new HP printer that has 'networking' capabilities. I have no idea exactly how to 'network' my iBook and Powerbook with this printer, but I would love to find out. I am assuming that I need an ethernet cable and a 'router'. Can anyone be more specific with this information. I would greatly appreciate it! Thank you, shineylewis
PB g3 Mac OS X (10.4.2)

You are exactly right. A router and 3 ethernet cables are what you need. Get a 10/100 router (Linksys, D-Link, etc.) with more than three ports. Connect an ethernet cable from the iBook to a port on the router, the PowerBook to the router, and the HP printer to the router. Set the router as a DHCP server and turn on the printer and computers. Configure the laptops to use DHCP and you should be networked.

How to assign the cost to objects in object list in a PM order ?

Hello,
If there are many equipments in object list in one PM order, how can I assign the cost to every equipment in the order ? And how can I query the cost of every equipment in the order?
I have tried to find the threads posted in the past, but I got no idear.
Waiting for your reply. Thanks.

Xifeng Xing
As stated above, when EHP5 arrives it promises operation level costing functionality.
At present this functionality is not available without designing your own reports
PeteA

How to assign an Auto created ticket from Printer supply level (My ticket Rules)

The percentage sign my be what's messing with you - that is a common (nearly universal) variable symbol. The simplest way is to add a new ticket rule, that looks a bit like this:

Here my goal: i want to auto assign with My Ticket Rules all the ticket auto created from Monitors & Alerts Printer Supply Level,
Printer Supply level config:
condition: is < 2%
Applies to: Printers
Email: uncheck
Ticket creation : Check
Close Ticket : Check
Enabled: check
My ticket Rules config:
From email,App,Portal: checked
Match: any
Rules :
summary; 2%
Description: This ticket was created automatically
command #assign: [email protected] (that is an active user in spiceworks)
not sure what i do wrong? am using 7.4.000.70
thanks for your assistance :)
This topic first appeared in the Spiceworks Community

How to assign forms for Physical Inventory Doc printing ?

Hi all,
I have 2 forms for 2 differnet factory to print Physical Inventory Document .
I have create 2 output type with differnet form setting , but i can't find the way to assgin output type for the factory .
Does anyone know how to config ?
Thanks a lot .

The transaction MI21 prints inventory using a SAPscript through INVENT.

How do assign mutiple client Macs my new Printer List? What do I copy over?

Similar Messages

Maybe you are looking for