How do "Auto-detect proxy settings for this network" and "Use system proxy settings" work behind the scenes?

How can I see what the proxy firefox actually uses when I check either of these two options?
Does it take it from Internet Explorer?
Are they stored somewhere in the registry?

Hi conectionist,
This is taken if there is a proxy set up in your network settings on your OS. If you would like to test there may be an add on:
*[https://addons.mozilla.org/en-US/firefox/addon/smart-ip-connection-info/?src=search]
Please feel free to search to find a better one if necessary.

Similar Messages

  • Where can I read the proxy settings Firefox chose, when configured to use "Auto-detect proxy settings for this network"?

    I would like to set my system network proxy settings to those, Firefox chose. Firefox is configured to use "Auto-detect proxy settings for this network" and this works fine. How can I read out the settings Firefox chose, so I can adapt these system?

    Hello Richard,
    Download MozBackup and make a backup of your bookmarks and passwords. Uninstall firefox and remove ALL folders with the name "Firefox".
    Install Firefox and restore your bookmarks and passwords. Now you should have a fresh install so you have to make all settings again.

  • No PSA for Infosource X and source system Y. Here Y is the flat file source

    Hi,
    We are facing an issue while transporting from dev s/m to quality. There is no PSA for Infosource X and source system Y. Here Y is the flat file source system this issue we are getting while transporting transfer rules.We are checked in OSS notes 518426. Its not helpful.
    Thanks
    Manjula

    Hi
    Try RS_TRANSTRU_ACTIVATE_ALL (SE38).
    You may also check SAP Note 861890 - ODS tables disappear during the upgrade -
    and activate all ODS Objects before the upgrade and run the program RSDG_ODSO_ACTIVATE.
    also that with Stack 14 an extended version of this program is available together with the
    Program RSUPGRCHECK. If errors occurs, consult also SAP Note 518426 and run transaction
    RSSGPCLA for the regeneration of the RSDRO_* Objects.
    Recheck whether you have Exported with correct parameters or not -- Try to Re Export the Same with all necessary objects .
    Try Note 524554 and 325525 also
    Hope it helps and clear

  • Auto-detect proxy settings for this network Not work with DHCP WPAD

    My Network browsing Internet Through TMG The DHCP Configure To Deploy WPAD with configuration it's work good with IE 8,9 and Google Chrome, but don't work with firefox, I Tired search for the Solution for this problem but all Solution To fail.
    the big problem is there are more PCs and laptops work with FireFox.And The laptops will be able to going out to another network with end users

    Hi conectionist,
    This is taken if there is a proxy set up in your network settings on your OS. If you would like to test there may be an add on:
    *[https://addons.mozilla.org/en-US/firefox/addon/smart-ip-connection-info/?src=search]
    Please feel free to search to find a better one if necessary.

  • Global Switches for Frame Blend and Motion Blur aren't working with the newest version of After Effects 2014.1.1

    I have been using After Effects regularly since 1995. So this isn't an operator error.
    I am on a new Mac Pro six core with OSX 10.9.5 and 32 gigs of RAM.
    Is anyone else having trouble with activating frame blend and motion blur?
    Occasionally I am able to get the global switch to appear to be on. It still won't activate motion blur or frame blend.

    I'll answer my own issue. The global switches actually work. The distinct dark boxes that indicate when the global switches are enabled have been removed and replaced by a light blue outline of the switch icon.

  • How the files are decreasing from RBS storage after some time i delete docs from document library, where shld I check the settings for this?

    HI
    I created a web application and configured  rbs storage ,
    I uploaded documents (for ex: 18 number)
     after uploaded  documents ,  and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
    and also  I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
    select count(*) from alldocs
    Select count(*) from AllDocstreams
    but when I delete some docs from document library ,
    1)the doc itself deleted from document library
    2)when I check the rbs storage  there is no number of files are decreased(its still 39 files ), its same as  before doc deleted from doc library
    after some time I found the number of files are decreasing from RBS storage folder in sql server,
    here I want to know the how the files are decreasing from RBS storage  after some time, where  shld I check the settings for this? and how I control on it
    here how I know the settings for cleaning up orphan BLBOS how  these deleted BLOB
    adil

    1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
    2. There is a RBS cleanup job which deletes files from RBS. for more info check 
    http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

  • Firefox not detecting/using system proxy settings

    I use a command line script to change among various proxies (and none). Firefox does not recognize when a proxy is turned on or fails to connect to it (no error messages), while other browsers and applications do just fine.
    I have tried selecting "Use system proxy settings" and "Auto-detect proxy settings for this network."
    My script contains these lines to activate a proxy
    reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections" /v DefaultConnectionSettings /t REG_BINARY /d 46000000b10000000200000014000000736f636b733d3132372e302e302e313a313131311c0000002a2e6c6f63616c3b3139322e3136382e31312e2a3b3c6c6f63616c3e000000000000000000000000000000000000000000000000000000000000000000000000 /f
    reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyEnable /t REG_DWORD /d 1 /f
    reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v MigrateProxy /t REG_DWORD /d 1 /f
    The first line enables the proxy to take effect without entering inetcpl.cpl. Again, this works for any application other than Firefox.
    The proxies are all through ssh with port forwarding.
    I do not want to manually configure a proxy in Firefox, because I do not want to change this every time I need to change proxies or turn them off. This is not an acceptable solution.
    I am on Windows 8.1 64bit, with Firefox version 35.0
    Any idea what might be going on here?

    Thank you for the response, but as above, the "Auto-detect proxy settings for this network." setting does not work.

  • Windows - Use system proxy settings not working as expected

    Hi everyone,
    I have a bit of an issue that I could use some help with. We currently have remote users that utilize an SSTP VPN connection to access our internal network. Once connected, those users are required to use an internal proxy server to connect to the Internet. The proxy server is Microsoft's TMG and utilized domain authentication.
    On our remote Windows clients we have their Internet Options configured to utilize a proxy as follows:
    Internet Options -> Connections -> LAN Settings -> No proxy configured at all
    Internet Options -> Connections -> Highlight SSTP Connection -> Settings
    Use a proxy server for this connection -> IP/Port of Proxy Server
    Firefox and Chrome are both configured to use system proxy settings.
    Here is my process to demonstrate the issues:
    Remote client workstation is rebooted.
    With the above configuration just after a reboot, a remote user that is not connected to the VPN can browse the Internet with Internet Explorer, Chrome, and Firefox. None of the browsers prompt for credentials.
    A remote VPN connection is then established.
    FF is opened and HTTP connections utilize the proxy server. However, HTTPS connections do not use the proxy server, but instead attempt to use the default gateway. FF does not prompt for credentials. FF is closed.
    Chrome is opened and can access both HTTP and HTTPS sites without issue. No credential prompt. Chrome is closed.
    IE is opened and can access both HTTP and HTTPS sites without issue. No credential prompt. IE is closed.
    Here's where it gets weirder...
    FF is then reopened. The VPN connection is still up. FF will prompt for credentials. Domain credentials are supplied and FF can now utilize the proxy for both HTTP and HTTPS connections. FF is closed.
    VPN is disconnected.
    FF is opened and cannot access the Internet as it is still trying to use the proxy server. FF is closed.
    IE is opened and can access the Internet. IE is closed.
    Chrome is opened and can access the Internet. Chrome is closed.
    FF is reopened and can now access the Internet. FF is closed.
    In summary, in the above scenario FF acts in an unexpected manner with regards to proxy usage when "use system proxy settings" is applied. However, Firefox begins acting as expected after IE is opened and closed. For example, connect to VPN, open IE, close IE, open FF, and everything works accordingly. Disconnect the VPN, open IE, close IE, open FF and everything works as expected.
    Any insight you can provide would be appreciated as it is affecting our FF users and the sooner we can achieve resolution the better. As a note, we've also worked through this issue with WPAD and proxy auto-detect. I've intentionally removed these from the equation to simplify troubleshooting.
    Thanks

    Quick update. Added to a previously filed bug. Looks like it's assigned now so maybe we'll see a fix for this soon.
    https://bugzilla.mozilla.org/show_bug.cgi?id=563169

  • 'The state information is invalid for this page and might be corrupted' error

    An admin user added a 'widget' for internet content to be displayed on our intranet (sharepoint). Now, anytime I try to modify the page (it is still checked out) I get this error:
    The state information is invalid for this page and might be corrupted.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.HttpException: The state information is invalid for this page and might be corrupted.
    Source Error:
    The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
    1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
      <%@ Page Language="C#" Debug="true" %>
    or:
    2) Add the following section to the configuration file of your application:
    <configuration>
       <system.web>
           <compilation debug="true"/>
       </system.web>
    </configuration>
    Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
    Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
    Stack Trace:
    [FormatException: Invalid character in a Base-64 string.]
    System.Convert.FromBase64String(String s) +0
    System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +67
    System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +4
    System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37
    System.Web.UI.HiddenFieldPageStatePersister.Load() +136
    [ViewStateException: Invalid viewstate.
    Client IP: 10.10.16.77
    Port: 3996
    User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; MS-RTC LM 8; InfoPath.2) chromeframe/5.0.317.0
    ViewState: 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...]
    [HttpException (0x80004005): The state information is invalid for this page and might be corrupted.]
    System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +267
    System.Web.UI.HiddenFieldPageStatePersister.Load() +218
    System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +83
    System.Web.UI.Page.LoadAllState() +35
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +7350
    System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +213
    System.Web.UI.Page.ProcessRequest() +86
    System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
    System.Web.UI.Page.ProcessRequest(HttpContext context) +49
    ASP.WELCOMELINKS_ASPX__1775745042.ProcessRequest(HttpContext context) +4
    Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context) +153
    System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +358
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
    Should I Publish it then re-check it out to edit or even restore to a prior version?

    Try one of the tips in these blog posts:
    http://weblogs.asp.net/lduveau/archive/2007/04/17/viewstate-chunking-in-asp-net-2-0-maxpagestatefieldlength.aspx
    http://delroger.wordpress.com/2008/08/19/invalid-character-in-a-base-64-string-aspnet/
    I suspect that the webpart the user added is putting a large amount of data into the page's Viewstate.
    Bryan Phillips
    MCT, MCSD, MCDBA, MCSE
    Microsoft MVP - SharePoint Services
    Blog: http://bphillips76.spaces.live.com
    Web Site: http://www.composablesystems.net

  • *** Question How to load a file into BI-Integrated Planning and use WAD 7.0

    Hi, I created an manual DTP upload to my planning infocube and it works fine.  The transformation rules convert 0CALMONTH into the relevant Calendar and Fiscal characteristics.   So all of my Time Characteristics are fine, both Calendar and Fiscal.
    However, When using the "How to load a file into BI-Integrated Planning and use WAD 7.0" solution, only the Calendar Characteristics are populated and not the Fiscal.   The upload application somehow knows to populate the 0CALMONTH2, 0CALQUART1, 0CALQUARTER, and 0CALYEAR.  
    How can I get the upload to populate my Fiscal Period Characteristics?
    Would it be best to modify the "Upload Application, or can I write a planning function to update the fiscal characteristics, or some other way?
    Thanks!

    My planning data is being uploaded via the SDN Planning File Upload Solution. What I did was end up modifiying the upload class ZCL_RSPLF_FILE_UPLOAD Method EXECUTE.
    I added the following code if anyone is interested.
    *{ INSERT BWDK902323 1
    THIS SECTION OF CODE POPULATES THE FISCAL PERIOD CHARACTERISTICS
    USING THE FISCAL YEAR VARIANT 'NK' AND THE CALENDAR MONTH/YEAR
    FIELD-SYMBOLS <0FISCVARNT> TYPE /BI0/OIFISCVARNT. " Fiscal Year Variant
    FIELD-SYMBOLS <0FISCYEAR> TYPE /BI0/OIFISCYEAR. " Fiscal Year
    FIELD-SYMBOLS <0FISCPER> TYPE /BI0/OIFISCPER. " Fiscal Year/Period
    FIELD-SYMBOLS <0FISCPER3> TYPE /BI0/OIFISCPER3. " Posting Period
    FIELD-SYMBOLS <0CALMONTH> TYPE /BI0/OICALMONTH. " Calendar Month/Year
    ASSIGN COMPONENT '0CALMONTH' OF STRUCTURE <L_S_DATA> TO <0CALMONTH>.
    ASSIGN COMPONENT '0FISCPER' OF STRUCTURE <L_S_DATA> TO <0FISCPER>.
    ASSIGN COMPONENT '0FISCVARNT' OF STRUCTURE <L_S_DATA> TO <0FISCVARNT>.
    ASSIGN COMPONENT '0FISCPER3' OF STRUCTURE <L_S_DATA> TO <0FISCPER3>.
    ASSIGN COMPONENT '0FISCYEAR' OF STRUCTURE <L_S_DATA> TO <0FISCYEAR>.
    <0FISCVARNT> = 'NK'.
    CALL FUNCTION 'FISCPER_FROM_CALMONTH_CALC'
    EXPORTING
    IV_CALMONTH = <0CALMONTH>
    IV_PERIV = <0FISCVARNT>
    IMPORTING
    EV_FISCPER3 = <0FISCPER3>
    EV_FISCPER = <0FISCPER>
    EV_FISCYEAR = <0FISCYEAR>.
    *} INSERT

  • I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works - what settings do I need to use to make aiffs work?

    I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

    I have created some music tracks as aiff files which I want to load onto my iPod Shuffle 4th Generation, but it won't play them - it just bleeps at me. I have changed them to AAC which works but would rather use aiffs. Can anyone tell me what settings do I need to use to make aiffs work? The info on the iPod says that it accepts aiff files!!

  • I cannot downlaod and install any apps.  How do I change the  settings for this?

    I cannot downlaod and install any apps.  How do I change the  settings for this?

    Use this article: iOS 7: If you're asked for the password to your previous ...

  • My iPhone won't allow me to scan for any network and won't even pick up on any wifi networks near by. How do I fix this?

    My iPhone 4s won't allow me to scan for any networks and won't even pull up wifi networks near by. How do I fix this?

    Settings > General > Network > Reset Network Settings.
    If that does not resolve the issue...
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • Strange info in "Bypass Proxy Settings for These Hosts and Domains"

    For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
    No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
    Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
    Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
    I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
    Thanks

    When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
    ... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
    In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
    If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
    Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network  and choosing to set up again.
    Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
    In this case, proxies are not an issue, and are simply a distraction from the real problems.

  • Workflow fails when page is created through the CreatePublishingPageDialog.aspx. The settings for this list have been recently changed.

    Hi,
    I've created a content type and attached a workflow to it so when I create a publishing page the workflow should run.
    My Page creation is based on the "_layouts/15/CreatePublishingPageDialog.aspx" page in order to be allowed to fill in the required fields on item creation (so I don't have to go to the page afterwards and choose "edit properties").
    On my page library I have "Require content approval for submitted items" and "Require documents to be checked out before they can be edited?" set to YES.
    This design has worked fine before I added my workflow. However now when I click save or check in/publish I get the below error. My guess is that the workflow starts (and blocks) right after I fill in the filename and click next in the "CreatePublishingPageDialog.aspx"
    step to go to the required fields.
    If I go back to my page after I receive the error below I can edit the required properties again and then publish the page correctly.
    How do I avoid this? thank you
    My pages are created through
    Checking the ULS log I get this error:
    Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The settings for this list have been recently changed. Refresh
    your browser before editing this list.   
    at Microsoft.SharePoint.WebControls.BaseFieldControl.OnLoad(EventArgs e)   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.HandleError(Exception e)   
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.ProcessRequest()   
    at System.Web.UI.Page.ProcessRequest(HttpContext context)   
    at Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context)   
    at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

    Hi Jan,
    Thanks for posting this issue, Kindly try out with the hot fixes provided in the below mentioned URLS
    https://support.microsoft.com/kb/2536591?wa=wsignin1.0
    http://elblanco.codeplex.com/releases/view/6856
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

Maybe you are looking for