How do connect mt iPod to my wireless/Bluetooth hp printer

How can I connect my ipad2 to my wireless/Bluetooth HP printer?

Please go on the iPod Touch forum - this is for iPod Classic

Similar Messages

  • How to connect my ipod to itunes if my ipod is disabled and my top button is broken

    how to connect my ipod to itunes if my ipod is disabled and my top button is broken

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to connect my iphone to a wireless speaker

    how to connect my iphone to a wireless speaker logitech Z515

    Are you trying to connect over Bluetooth?
    Matt
    Message was edited by: Matthew Morgan

  • How to connect my i phone to wireless printer

    how to connect my i phone to wireless printer

    You would have to have one of the few HP printers that support airprint:
    iOS: AirPrint 101
    Or you could find an app that provides this feature.

  • How to connect sad ipod to itunes ?

    how to connect sad ipod to itunes ?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to connect 2 iPod classics with bluetooth

    I am trying to sync photos between 2 iPod classics, iPad4 and iphone 5 with blue tooth. The only devices that are seeing each other is the iPhone and iPad but still hasn't' synced the photos. Why re the apple devices not able to see each other?

    Havilah Farm wrote:
    Why re the apple devices not able to see each other?
    Because that's the way Apple have designed it. They have used a particular Bluetooth protocol that is designed to allow audio to be transmitted to Bluetooth headphones or Bluetooth speakers (for example) and some peer-to-peer gaming between the devices, but not the transfer of files.
    To transfer photos, Sync them via your iTunes programme. If you took the photos on the device, transfer them to your computer first and then Sync them with the other devices. For photos that were not taken on the device, they presumably were Synced from your computer originally, so simply Sync them to your other devices from the computer.
    By the way, your subject question: "how to connect two iPod Classics with Bluetooth"...
    You cannot. The Classic does not have Bluetooth.

  • How to connect my ipad with mac using bluetooth?

    how to connect my ipad with mac using bluetooth?

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • HT204387 how to connect iphone4s to other phones via bluetooth??????

    how to connect iphone4s to other iphones via bluetooth??????

    You can't. It's not and never has been a feature of the phone. Here is a list of what you can connect the phone too using Bluetooth:
    http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US

  • How to Connect Airport Express to Existing Wireless Network (Client Mode)

    I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save someone else the agony we went through.
    So here's the situation:
    Say you already have your own home network set up, and all you want is to be able to use AirTunes to play music off iTunes into your speaker system. And, you don't need the printer sharing capability nor creation of another wireless network (2 of the features of Airport Express). Then this solution is for you - read on.
    Unfortunately, Apple's user manual is very unclear how to connect Airport Express to your own network. When you look at the picture diagram they provide, they show Airport Express picking up its signal from another Apple-oriented base. This can make you think you need to buy another piece of hardware to make it work. DON'T If you read through the manual, the Support section here, etc., you will hear lots of talk about "Client Mode" - and that this is the only way to get it to work. Nice - but no one really tells you how to set up the Airport in client mode.
    Do yourself a favor, toss that user manual aside and run these steps.
    (Note: These directions assume your DSL/Cable Modem is hooked up to a wireless router or acts as its own wireless router)
    1. Get a cat5 Ethernet cable (anything but an orange cable - that's a crossover cable) like you would use to connect your PC to your router to pick up the Internet.
    2. Connect the Ethernet cable to the router on one end, and to the Airport Express unit on the other end.
    3. Plug in your Airport Express unit to the wall (this will not necessarily become its permanent location - you will be able to move it later). The light will glow solid Amber for about 30-45 seconds while it starts up, then blink Amber. At this point, the unit is ready to operate.
    4. Install the CD to the PC where your iTunes music is stored. This should be painless. Once you open the program, it should detect the Airport unit.
    5. At this point, the on-screen wizard will present you with your options, and walk you through the setup. This is much like the user manual describes - and you should be good to go form here forward.
    Some pointers:
    - When asked if you want to create a new network, join an existing network, or connect via Ethernet, choose the middle option for joining an existing network. You will need to know the name of your network, the password to connect to the network (if present), and the type of encryption used on the network (e.g. WEP, WPA, etc.). Side note, WPA is recommended, as it is a higher level of security than WEP. You will be able to configure the Airport Express unit to automatically login to your network.
    - I would recommend, when creating a password for the Airport Express unit, use the same password as your network, to avoid confusion.
    6. The very last step will ask you to save the settings to the Airport Express. Here's the kicker - when you save the settings, you are TRICKING the Airport Express into no longer acting as a network broadcaster, but instead being a "slave" to your own network. What do I mean? You will lose the connection from your PC to the Airport Express - an error message will pop up telling you the unit can no longer be found. While you might think you did something wrong, you actually were successful!
    7. Unplug your Airport Express, and disconnect the Ethernet cable from your router and the Airport unit. This will no longer be needed.
    8. Go to your desired location where you want to plug in your Airport Express unit. Before plugging it in, connect your Audio cable from the Airport Express to your audio receiver. Once that is connected, then plug in the Airport Express unit. The light will glow solid Amber for 30-45 seconds while it loads, and then will blink Amber for a brief period of time before turning solid GREEN. When this happens, you have successfully connected the Airport Express to your home network!
    9. Go back to your PC with iTunes. Open the Airport software - you should now have a listing for your Airport Express unit in the upper left. Click on this, and the wizard will guide you through connecting - you will need the password you created for the unit. You only need to go through this wizard once, and when finished, the software will tell you that can now use iTunes with your Airport unit.
    10. Open iTunes. On the lower right, you will see a dropdown for Speakers, and it should be defaulted to My Computer. Click on that drop-down, and you will see the name of your Airport unit. Click on that name, and now your music will broadcast to the Airport unit!
    11. Play a song in iTunes. Go to your audio receiver, and connect it to the channel for your external connection to the Airport Express unit. You should hear your music from iTunes. CONGRATULATIONS! =)
    I hope these instructions were helpful - I am happy to answer any questions, so feel free to contact me, *******************@*****.**.
    <Edited by Moderator>

    Thanks for the detailed directions. You are absolutely correct in stating that people should toss the user manual; it's pretty worthless. I have had a problem setting up my new Airport Express as I have described in an earlier post - http://discussions.apple.com/thread.jspa?threadID=1839873&tstart=45
    One quick question - does using your setup process set the AE up as part of a distributed network where the AE is acting as a wireless router where it is extending the range of your network? Or, is it simply a wireless connection to your stereo for iTunes? I am interested in having both, since my AE will be at the other end of the house from the main wireless router.
    Thanks

  • How I connect my Ipod touch to wi-fi

    just got my ipod and I don't know how to connect it and if it suppose to be connecting by itself? Help me please.

    Do you have a wifi network set up already? If so, after you synch the Touch with iTunes and do the initial setup, it should hookup with your network automatically. If it doesn't, go into SETTINGS>WIFI on your Touch to see if your network shows up there. If not, click on "other" and put in the name of your network and then see if the Touch finds it.

  • How to connect my ipod with my mac

    Hello...
    I'm trying to connect my ipod touch with my mac book pro and for some reason the ipod is not paired, it is conected and the mac is finding the ipod but not pairing it
    The arror i get at my ipod is:
    Make sure "maci" (my mac name) is turned on, in range, and is ready to pair.
    What do I need to do to make it work?
    Tanx

    This is not feature of the ipod touch.  You cannot connect to a computer or another phone or device.
    It is for stereo headsets/speakers and some peer-to-peer apps from the app store.

  • How to connect my ipad mini to wireless printer

    Could someone tell me how to connect my ipad mini to my AirPrint printer

    If it says there is no sim card installed it either can't find one physcially, or the card moved and lost contact or has failed.  A new sim card can be obtained form your Mum's cell/mobile carrier if needed easily.
    However this is irrelevant to whether or not the iPad can join a Wifi network.  Its 2 different things.
    For now ignore the Sim card message and just try to connect to her Wifi network.  It is independent and should function regarldess of the sim card status.

  • How to connect my ipod to a tomtom gps?

    Can't find solution for connecting my ipod classic 4GB to my Tomtom GPS GO910...

    hi Michel,
    Do not forget that you need to put the Livebox in "association" mode otherwise you will not succeed in connecting to your wifi network. (sur les Livebox Inventel, il faut appuyer sur le bouton "1" se trouvant à l'arrière. sur les Livebox Sagem, c'est un bouton à enfoncer près de la prise d'alimentation). The Livebox remains in "association" mode for 10 minutes, this gives you enough time to enter your WEP key..
    Plus d'info sur le mode d'emploi de ta Livebox.
    Bye,
    /Phil

  • How to connect my ipod to a dvd receiver system

    I am trying to connect my ipod touch to my dvd receiver but I cannot get any sound?? Do I need to change my settings on my ipod?

    hi Michel,
    Do not forget that you need to put the Livebox in "association" mode otherwise you will not succeed in connecting to your wifi network. (sur les Livebox Inventel, il faut appuyer sur le bouton "1" se trouvant à l'arrière. sur les Livebox Sagem, c'est un bouton à enfoncer près de la prise d'alimentation). The Livebox remains in "association" mode for 10 minutes, this gives you enough time to enter your WEP key..
    Plus d'info sur le mode d'emploi de ta Livebox.
    Bye,
    /Phil

  • How to connect 3 ipods to one itunes account?

    We have 3 ipods ( 2* nano and 1 mini) in the family each belonging to people with differing musical tastes but only one computer. Can we set up 3 different profiles in itunes so when we each download music we only download our own respective choices. The nanos are being extended to their memory capacity.
    Rob

    There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have three Windows user accounts which by definition would give you three completely separate libraries. Method two is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
    If you go for method two, you can choose the update option "automatically update selected playlists only" which would mean you could create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPods. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod Mini or Nano (around 3700MB for a 4G). You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes

Maybe you are looking for

  • 'error in invoking target 'client_sharedlib' of makefile'   for help

    I am installing oracle 10g(10202_database_soxl86)on solaris 10 (sol-10-u10-ga2-x86-dvd.iso) throgh VMware workstation 7.1.4 I fellowing the steps below: 1. # pkgadd -R /cdrom/Solaris_10/Product SUNWarc SUNWbtool SUNWhea SUNWlibm SUNWlibms SUNWsprot S

  • K8MM3 and Sempron 3300+, power usage

    Setup (in an old box) : I am using a K8MM3-V mainboard with a Sempron 3300+ with an older power supply (for a P4 and 300W) that rates 12V at 12A, Maxtor 250G SATA HDD, RAM 512 Kingston, floppy and a DVD player.  Anyway, after booting on a Windows XP

  • Account in the System Preference Crash

    Every time I try to go into Account in the system preferences, it crashes. Any thoughts? All the other panes load fine. I've just delete com.apple.finder.plist in my preference and repaired permission. I'm running 10.6.1

  • Mapviewer demo's

    Hi, I'm trying to get the mapviewer demo's up and running, but I can't find instructions to do this. Oracle spatial and mapviewer are new to me, so maybe anyone can tell me how to do this. I've installed oracle 10g database and standalone mapviewer.

  • Exporting HD sequence from FCP

    I have what people describe as line doubling when I export from FCP. This happens if I use the SD DVD mpeg-2 preset in Compressor but it also appears even if I just create a self contained QT movie. The impact is that perfect footage in FCP becomes v