How do connect to 20g drive to save my work

How do connect to 20g drive to save my work. I can't find a link to it anywhere within my creative cloud package.
John

The storage is used by various online features, but there is no generic "save to cloud" option in most programs. You have to upload via CC app or the web site.
Mylenium

Similar Messages

How to connect a hard drive on Airport Extreme (second edition)

how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

The USB port your Mac is high powered. The port on the AirPort Extreme is not.
So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

How to connect a SATA Drive in a G4 MDD Desktop Mac?

Due to much more needed harddisk space for music production on my G4 1.25 GHz Dual PC, I ordered and just received a SATA 500 GB internal Harddiskdrive.
Under "About This Mac" in the System Profiler I get a list of all my internally already connected ATA Drives. But there is also a (empty) category available, named "Serial-ATA" which I strongly assume stands for SATA. I further think once such a category is existing I should be able to connect a SATA drive.
Now:
1. Can I connect the new SATA HD internally in my Dual G4 or must I use the Drive as an external Firewire Drive (of course in a special housing)?
2. If it is possible to built in a SATA drive, must I buy an adapter in any form, because the interface on the SATA drive is different from the cable endings in my Mac?
3. If so, what is such an Adapter be called (from Inerface A name to Interface B name) and do I get it at an electronic store?
4. Is there anything crucial I do need to know regarding this matter (maybe voltage compatibility, adjustments on SATA drive or in my Macintosh G4, etc.)?
5. And if it should not be possible to use the HD internally (as in question 1.), are there housings with Firewire 800 connectors available for SATA drives which I can use?
I would be very glad for your specialist help! Thank you!
Steve
G4 1.25 GHz Dual PowerPC 1 MB L3 cache processor · 1.25 GB DDR SDRAM · Mac OS X (10.4.8) · 19" CRT ƒAQTOR 19+ Monitior · AD/DA Converter MOTU Traveler

Thank you all (Malcolm Rayfield · The hatter · Rodney Culling) so very much. I thought I would be lost and stuck - on contrary I got your huge help.
Unfortunately I bought already the SATA 7200.10 and it had been delivered. But I am very happy to hear that there are PCI SATA cards available and I preferably would like this solution to have the Drive as an internal drive. It is for me easier to tame the noise not having an additional drive in my Mini recording studio.
I will investigate into the prices of those cards and only do hope that the price for such PCI SATA cards are not to expensive otherwise my bread deliverer (boss) will refuse. He was already not excited to hear I ordered a SATA drive but there was no ATA anymore available at my usual source and if I later upgrade to a G5 I can take the drive with me. I only will have then the reverse situation using some of my older ATA drives in a new G5.
Thanks a million again for your kind and unexpected fast help. Thanks!
Steve
G4 1.25 GHz Dual PowerPC 1 MB L3 cache processor · 1.25 GB DDR SDRAM Mac OS X (10.4.8) · 19" CRT ƒAQTOR 19+ Monitior · AD/DA Converter MOTU Traveler

How to connect Android CDC driver on OSX with ACM and ECM data interface

I need to help connecting My android CDMA modem to OSX
first I have attached some Picture on Windows. please see the picture as below.
I want to connect to Redline box port same as on the OSX.
but my OSX(Mountain Lion 10.8.2) had found 2 port
SAMSUNG_MDM and
SAMSUNG_VSP
MDM was working with AT command, but I don't need a AT command and Qualcomm Command did not working. (This command definition from out test tool)
it is look like this "00 + CRC", this string common command on the qualcomm chip android phones. with modem port(CDMA modem)
VSP did not working without anything.
I have googled on the internet, and I have found "dmesg"
and then some messages show up
===============SHOW UP MESSAGS=======================================
SMSIWirelessModem: USB Modem Line Control interface initialized
SMSIWirelessModem: USB Modem Driver loaded for Samsung wireless Samsung device
SMSIWirelessModem: Copyright (c) 2004-2008, Smith Micro Software, Inc. All Rights Reserved
SMSIWirelessModem: Device Name is "SAMSUNG CDMA Technologies"
0 1 AppleUSBCDCACMData: start - Find CDC driver for ACM data interface failed
0 1 AppleUSBCDCECMData: start - Find CDC driver for ECM data interface failed
SMSIWirelessModem: USB Modem Line Control interface closed
SMSIWirelessModem: USB Modem interface closed
=======================================================================
Please I need a help reply to me
and My email address is "[email protected]"

How to solve the error?

How to connect a wireless drive and stream to my stereo through MacBook. I currently have a non apple WiFi network

I currently have a PC based WiFi network and am about to buy a MacBook Pro. I have 250 gb iTunes library and 100+ gb of photos. What I was going to get is the 120gb MacBook and run an external drive to store the iTunes library and photos. For intensive photographic work I'd directly connect the drive but day to day I'd connect it to the wireless network. What I want to do is to stream my music, from the wireless drive to my stereo
Will the drive work this way on my existing router - usb2 connected? Or do I need an apple device. Should I use an airport or Apple TV to connect to the stereo?
I also want to have the option of streaming from my iPhone.

Will the drive work this way on my existing router - usb2 connected? Or do I need an apple device. Should I use an airport or Apple TV to connect to the stereo?
I also want to have the option of streaming from my iPhone.
Hard to say when you don't give us a clue what you current router is??
USB2 is slow.. it is double slow from a network device.. and even slower if that network device doesn't actually have too much CPU power or RAM..
Even worse is the idea to move the disk from the network to the local external port.. because then format comes into play.. Apple devices can use FAT32.. yuk.. but really want HFS+.. most routers cannot talk HFS+ except apple ones.. they want NTFS or FAT32.. You can see where this is going.. buy two disks.. one for library.. one for a scratch disk .. usb3 will be great.. or thunderbolt even better. And when finished copy your project to the network drive..
Think carefully about backups.. they are important too.. might be time to invest in a real NAS. Not toy systems with USB.. dangling off them.

How to connect a hard drive on the usb port of my time capsule?

Hello,
I have a 1T iomega HD and would like to connect it to my TIME Capsule to either mak a back up of it or to expand the capacity of my TimeCapsule.
thanks
Ric

You now have two drives that can be used for Time Machine backups, or other storage needs.
You need to understand though that Time Machine will not simply continue backups to the USB connected drive once the Time Capsule is full. You will have to start over with a new "master" backup on the USB drive and then proceed with incremental backups again.
If you plan to copy the contents of the Time Capsule to the USB drive, that is a separate type of backup called an "Archive". I am not clear if you want to do this or not.
Are you able to "see" both the Time Capsule drive and the USB connected drive in the Finder, or do you need some tips on that?

How to connect external hard drive and DV camera

I have just bought a macbook pro with only one firewire 400 port. My question is, what is the best way to connect up an external hard drive and a DV camera so I can import video to Final Cut. Should I be plugging the camera directly into the external hard drive's firewire port and conecting the hard drive to mac via USB or connecting DV to mac via Firewire and then mac to hard drive via USB? Or does it make no difference!
Thanks in advance

If the drive has two firewire ports, connect the camera to one FW port on the back of the drive and connect the drive to the computer using the other port.
If the drive does not have two firewire ports, you'll need an Expresscard 34 firewire card to create a second firewire bus. The card goes in the slot on the side of the computer. Hook up either the camera or the drive to it.
The cards can be found online for a reasonable sum of money.
Do not use USB.
Good luck.
x

How to access internal hard drive with screen not working

Veteran Mac user from Spain,
I am a graphic designer and i have a MacBook Pro 17 inch Intel Core 2 Duo 2.4 GHz (Santa Rosa) which i purchased in October of 2007 along with a 23 inch Apple Cinema HD Display Monitor which i have hooked up to my MacBook when i am working at home. About 2 months ago the right hand ventilator started making a very loud noise but because i had a lot work on i did not have time to send it away to be fixed. Then about a month ago the fan stopped working and i was very concerned that my MacBook was going to overheat but to my surprise the temperature never rose above 60 degrees, so i continued to work and every thing seemed to be okay. But a couple of weeks ago i was online and the computer suddenly froze up and when i restarted it all i got was a black screen on both the MacBook and the Cinema Display Monitor. The hard disk seems to boot correctly and the keyboard on the MacBook also is responsive (volume, brightness controls, caps/number lock, etc… are all responsive and the retroilumination on the keyboard also works). So on reading up on the forums i discovered that the graphics card NVIDIA 8600M GT is in fact faulty. I called apple and explained the problem and they told me that i will also have to replace the logic board.
On discovering the problem i realised that it would take a while to be fixed and i would need another Mac to continue working. So last week last week i purchased a Mac Mini and hooked it up to my Cinema Display and everything is working fine, BUT i desperately need to access my work folder on my MacBook's internal drive.
Can anybody tell me how to transfer the files from my MacBook (late 2007) to my Mac Mini without the screen working on my MacBook?
If it helps, my MacBook is running Leopard 10.5.8 and the Mac Mini is running Lion 10.7.2. The Mac Mini has an Intel i5 processor 2.3 GHz.
I would really appreciate the help, it is very urgent and i need to find a very quick solution, clients depend on it.

Thank you very much for your swift response.
I am going to try the second option that you propose because as i mentioned in my first post, i had my MacBook Pro hooked up to my Apple Cinema HD Display monitor and both screens were black.
Just one question…
Will the hard drive need an extrenal power source?
I am guessing that it will use the Mac Mini's power supply but i just want to make sure.
Thanks again! You have been most helpful.

How to connect to a hard drive on a internet box (afp ?)

hello everyone
I have a problem since I am on Lion with my internet box. I pluged a hard drive on it. On my others computers (on Windows, icluding my mac with bootcamp)
The Lion is unable to connect the HD. I can see it on my finder (but not everytime), but it can't connect with it.
I thaught I found the solution here (in french):
http://support.apple.com/kb/HT4700?viewlocale=fr_FR
But it didn't work!
I think my probleme is a the step 3 where I have to make a AFP connection. What is it exactly?
Is it the right solution?
Thanks for help.

That would depend on how your internet box shares out the hard drive. If it doesn't support AFP, then using AFP to connect to it won't work at all. If it does support afp, then go to the Finder and select Connect to Server from the Go menu. For the address, use afp://ip.address.of.router.
You Also might want to check your router help files for how to connect to shared drives.
Apple had to drop Samba, the old SMB/CIFS implementation of Windows File sharing. They wrote their own implementation, but it might not be completely compatible with how your router is sharing out the hard drive.

How do I prevent Elements from launching when I connect a flash drive?

When I connect a flash drive or SD card to my computer, Photoshop Elements automatically launches a component to save and organize my photos. I already have a system in place to organize my pictures so do not want to use the one from Elements. How do I prevent the program from launching automatically?

On Windows go to the Control Panel >> AutoPlay
And change your settings to “Always Ask” for photos and videos and save.
If your camera, phone or other devices are listed at the bottom you can also change those settings.
Click to view

When I connect an external drive I'd like to run a program which is on it. How could I do that?

When I connect an external drive I'd like to run a program which is on it. How could I do that?
I tried automator, but without success.
Thanks

Interesting question. Others have provided the direct answer (no, massive security hole), and a little time with a search engine finds various existing discussions of autorun-related topics (eg: here and here and here), and a link to the Do Something When tool, and there is the DeviceListener example in the Xcode kit and to adding a folder action where the volumes are mounted. See the topics for details. Haven't tried this stuff, though.

How to share external USB drive connected to airport time capsule

I have a 4TB Seagate USB Hard Drive connected to my Airport Time Capsule. The Time Capsule connected to a newer iMac running Maverick.
I use the Time Capsule for Time Machines Backups and as a Router, as it was designed for.
I want to use the external Seagate drive to share content with other devices (Mac, IOS, Windows) on my home network
Problem: I cannot figure out how to SHARE the external Seagate drive so that any other devices can see it.
Steps tried: Go to System Preferences, Sharing, and I am unable to add this Seagate drive to list of sharable objects. It is grayed out.

the drive is formatted as AppleShare. Is that a potential problem?
No, that is the correct setting if you want to share out the drive.
Finally, when I run Disk Utility I don't see the Seagate drive (nor the Time Capsule) at all.
Remember that the Time Capsule is a network drive. Any other drive connected to the USB port on the Time Capsule is also a network drive.
Disk Utility cannot be used on a network drive. It only works on a drive that is directly attached to a Mac. If you need to partition the USB drive or something similar, you will need to connect it directly to your Mac for the operation.
Otherwise, everything looks correct in AirPort Utility.

I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??

I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??@

This is a Mac question not a Photoshop question, and I am a Windows users, but I can Google and this might be what you need to do:
http://www.makeuseof.com/answers/change-read-permision-external-hard-drive-mac/

How can i connect a hard drive attached to my router?

hello;
i have a zyxel vmg3312 dsl router and the router have a usb host and i attached my usb hard drive to the port. i can access all files from my PC but i cannot connect with my mac. the problem is when i try to connect to hard drive with smb connection like this.
my mac asks me to enter a user name and password like bellow and i don't have any. in PC i dont need any user name and password. the guest option is not letting me connect.
here is my question how can i connect my external hard drive attached to my router ?

You need to connect as a Registered User Create a USERNAME and a PASSWORD it has to be something you will remember not something you will forget in a week. Click to Remember this Password in my Keychain. After you are finished restart your computer and then connect.

I have an iMac running system 10.10.3. I would like to use an external hard drive to save all my iMovie projects. How do I transfer the files and tell iMovie where to find them?

How can I move all my iMovie projects to an external hard drive and save all future projects to that same drive without constantly getting the 'can't find files' statement? I am using iMovie 10.0.7,

Have a look at the help files on this at: http://help.apple.com/imovie/mac/10.0.8/#/mov3fa25bae7
You can have multiple libraries if you want and save them anywhere.
Geoff.

How do connect to 20g drive to save my work

Similar Messages

Maybe you are looking for