How do Design Mode Settings get Packaged?

Hi,
I've got a question about packaging a Site's Design Mode settings.
If I edit the Settings of a parsys in Design Mode (i.e. Anchors, or Allowed Components), where in the JCR do these settings get stored?  How do I ensure they are packaged?
I'm sure this is a simple answer...
Thanks!

Hi Tim,
If you are setting for example allowed components for a parsys and you have assigned to your page some custom design (not default) all configurations are stored under:
/etc/designs/<name_of_design>/jcr:content/<name_of_template>/<name_of_parsys> in the components property
Reagrds,
kasq

Similar Messages

  • How to edit text in design mode - i.e get an I cursor instead of arrow

    DW CS6 This is a very basic unclear on concept question. I normally work in code view and have no problems. Sometimes there is a large block of text within a paragraph which is in a div.
    I would like to correct a simple typo or insert some more text directly from the design mode display. However, almost all the time, when I click on the spot I want to modify, the cursor remains an arrow and the entire div gets a yellow border. I still have the select arrow, not the vertical bar I need to edit.
    Sometimes I seem to stumble onto the right set of clicks and get the edit bar.
    Thanks for any suggestions.

    Design View can get pretty cranky when your code has errors.
    Check the validator at http://validator.w3.org and make sure you're working with clean code before resorting to wiping preferences, config folders or reinstalling.
    If your code is clean and it's still not allowing you to click your text in Design View, you may have a z-indexing issue. I notice on pages that use a lot of positioning (APDivs) you can accidentally cover up your text boxes with blank/transparent areas of other elements and cause problems when trying to access that text at a later date.
    It's all guesswork though without seeing your actual page.
    Could you post a link?

  • When using clone tool, the NORMAL mode has disappeared.  How can I reset to get normal back???

    I have searched and cannot find a solution for this.  The NORMAL mode for the Clone tool (at the top in options) has disappeared.  The top two are dissorve and behind.  I cannot find out how to reset and don't know what I did to make the "normal mode" option disappear from menu.  Please help!  Thanks,  Jeanne

    Sounds like the scroll bar is missing. I've seen a few posts about this happening with the brush tool. Bug?
    It can be worked around by using the blend mode shortcuts.
    Shortcut key combos to rotate through blend modes
    Select the tool (clone tool) then press alt + shift + N to get normal blend mode if on Windows. If on a Mac change that shortcut to opt + shift + N.
    Dissolve is probably also missing. The window's shortcut for that if needed is alt + shift + I. On Mac, use opt + shift + I.
    Alternately, you can rotate through the blend modes by using the shortcut key combo alt + shift + + on Windows. On Mac, that shortcut will be opt + shift + +. You can also substitute - for the + in that combo to rotate up through the  blend mode list instead of down through the blend mode list.
    The above shortcut combos work smoothest if you hold in the alt + shift (opt + shift) keys together before you press the letter or + or - key.
    These shortcut work combos with any tool that uses a blend mode settings...

  • I just installed Firefox on a new HP 600-1120 with Windows 7 and it is only running in "safe" mode. Why? How do I get it to run in "regular" mode? How does "safe" mode differ?

    I just installed Firefox on a new HP 600-1120 with Windows 7 and it is only running in "safe" mode. Why? How do I get it to run in "regular" mode? How does "safe" mode differ?

    > So now my question is, how can i fix this problem?
    Use the Toshiba recovery disk or the Toshiba HDD recovery option.
    If you dont have the Toshiba Recovery disk try the HDD recovery:
    http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    This works only if the recovery image files from Toshiba are still on the HDD:
    If you installed the system using another disk as Toshiba recovery disk, this recovery option will not work.

  • How to suppress the back-ground execution of a query in design mode

    hi guys,
    there is a bahaviour of the system, that I'd like to change. So, when we
    1. start EXCEL
    2. go to the designer mode to create a report
    3. first drop an InfoProvider (e query) into a cell,
    4. second - pull e.g a filter element into another cell, still being in the design mode.
    Just in this moment, the query itself has been already started in the back groud, aiming to fill the cache, I guess.
    Does anyone know how to suppress the back-ground execution? I'd like to control, when to start the reports execution.
    Thanks in advance.
    Neven

    Hello,
    There is no way to do that if you are creating thru BEx Analyzer.
    Instead use the BEx Analyzer, try to create using directly BEx Query Designer.
    In that way, the query will not be executed, until you want to...
    Thank you
    Edward John

  • DS SDK: How to check if plugin is called in "design mode" or in browser?

    Dear SDK experts,
    I just created a simple world-/europe map plugin based on Datamaps (http://datamaps.github.io/) which works fine when the dashboard is executed in the browser but crashs, when I drag my plugin into the design area (maybe it's called different) of design studio. As I found no easy way to debug my created js code directly in design studio, is there is simple check so I can call the "real" plugin code only when my dashboard is executed in the browser and for example display only a static image when it's called inside design studio?
    This check would also help a lot in my other plugins and I am sure, I already saw some coding somewhere -hopefully you remember where.
    Thank you very much in advance for answering my very first question here on SCN.
    Best regards,
    Oliver

    Hi Oliver,
    The approach for determining design mode is documented in this thread: SDK - how to control other objects
    Specifically, the code is:
    if (window.sap && sap.zen && sap.zen.designmode) {
    // Design time only code...
    Hope that helps.
    Regards,
    Mustafa.

  • How to order a query, in design mode?

    Hi,
    I work with the bex 3.x and I need to know how can I order a query by a ratio/s in the design mode (with the query designer)?
    Before running the query.
    Can anybody help me?
    Thanks in advance.
    Regards.

    Hi,
    refer below thread
    [http://help.sap.com/saphelp_nw70/helpdata/en/ba/45583ca544eb51e10000000a114084/content.htm]
    [http://help.sap.com/saphelp_nw70/helpdata/en/e7/47dd1613d14c449ce2a3f1461d8c87/content.htm]
    Thanks,

  • I have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

    i have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

    Did you also check under Albums?  All Songs?
    iPod Nano 5th Gen. User Manual

  • I would like to know how to cancel the signing of the match itunes, bought it thinking it would be a package of unlimited songs, how do I cancel and get refund?

    I would like to know how to cancel the signing of the match itunes, bought it thinking it would be a package of unlimited songs, how do I cancel and get refund?
    eu gostaria de saber como cancelo a assinatura do itunes match,pois comprei achando que seria um pacote de musicas ilimitadas,como faço o cancelamento e recebo reembolso?
    and i would like to know about the plan for take ilimited music?
    ATT,
    Bruno Riscado Dias

    Bruno Riscado Dias wrote:
    I would like to know how to cancel the signing of the match itunes, bought it thinking it would be a package of unlimited songs, how do I cancel and get refund?
    You can turn off iTunes Match by pulling down the Store menu and selecting "turn off itunes match." You'll need to contact iTunes Store support for a refund.
    Bruno Riscado Dias wrote:
    and i would like to know about the plan for take ilimited music?
    Apple has no "unlimited music" subscription plan avaiilable.

  • Very slow SSIS package in design mode

    Hi,
    I have one SSI package was created 4 years back; Which is very slow in design 
    mode after i moved the package into other new system(32GB RAM,1TB harddisk,x64 
    windows). There are other SSIS projects running on the same system does not have 
    this issue. The same package is faster in old system.
    The package contains 5 data flow task.
    Which load data from excel sheet and SQL server database. average number of rows 
    loading is 10000.
    I have tried by removing some dataflow task to another new package, but still 
    slow.
    Please advise. 

    I have one SSI package was created 4 years back; Which is very slow in design  mode after i moved the package into other new system(32GB RAM,1TB harddisk,x64  windows). There are other SSIS projects running on the same system does not have 
    this issue. The same package is faster in old system.
    As you said packages are slow in design time. I assume that loading packages, opening Data Flow or any other tasks are slow.
    When SSIS package is loaded, it tries to validate all tasks and test all connections to SQL/Excel etc...
    So in this case we can set the WorkOffline property which would make package loading faster and also there are properties called DelayValidation, ValidateExternalMetadata you can use.
    Please refer:
    http://microsoft-ssis.blogspot.in/2011/11/long-validation-of-ssis-packages-in.html
    Cheers,
    Vaibhav Chaudhari
    [MCP],
    [MCTS], [MCSA-SQL2012]

  • How does DW 8 display divs in "design Mode"?

    Hi everyone,
    Question: How does DW 8 display divs in the design window?
    I ask this because I am trying to create a website entirely
    in divs (with divs inside divs), and when I see certain things in
    my "design mode", some divs show up directly underneath. Example: I
    have #cellA and #cellB. I want #cellA right next to #cellB inside
    of a #container. Instead, when I try to insert a Div tag (after end
    of tag) it places it right underneath it. So #cellB is right under
    #cellA, when all I want is for them to be side by side.
    Here is the link:
    http://www.helenbwilson.com/helen-css-test-01.html
    Is there a screen mode that I am not aware of?
    How do you guys look at how your divs are being displayed in
    the "design view" of dreamweaver.
    I have also just gone into the code and tried placing my divs
    there, but to no avail..
    Anyone have the same problem?
    Any help would be greatly appreciated.
    Thanks
    -psypent

    If you want divs side-by-side, you must float them.
    > How do you guys look at how your divs are being
    displayed in the "design
    > view"
    > of dreamweaver.
    They look right to me.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "psypent81" <[email protected]> wrote in
    message
    news:f1tgm4$6f9$[email protected]..
    > Hi everyone,
    >
    > Question: How does DW 8 display divs in the design
    window?
    > I ask this because I am trying to create a website
    entirely in divs (with
    > divs
    > inside divs), and when I see certain things in my
    "design mode", some divs
    > show
    > up directly underneath. Example: I have #cellA and
    #cellB. I want #cellA
    > right
    > next to #cellB inside of a #container. Instead, when I
    try to insert a Div
    > tag
    > (after end of tag) it places it right underneath it. So
    #cellB is right
    > under
    > #cellA, when all I want is for them to be side by side.
    >
    > Here is the link:
    >
    http://www.helenbwilson.com/helen-css-test-01.html
    >
    > Is there a screen mode that I am not aware of?
    > How do you guys look at how your divs are being
    displayed in the "design
    > view"
    > of dreamweaver.
    > I have also just gone into the code and tried placing my
    divs there, but
    > to no
    > avail..
    > Anyone have the same problem?
    >
    > Any help would be greatly appreciated.
    >
    > Thanks
    > -psypent
    >

  • How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

    How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

    So are there any other ways to get there, or to change options there?
    And is it plausible to use 3d vision (like nvidia its one) but than without an nvidia graphics card. for watching movie's and gaming etc.
    Thank you!

  • Elements Premier purchase post Elements 13 purchase. How to get package price?

    I accidentally purchased just the Adobe elements 13 but I wanted the Premier combo, what is the best cheapest way to get the combo deal on Premier elements now? When I went to Best buy I asked the sales guy what the difference was between the combo and just Elements and he said I did not need Premier elements but after finding out what It does I do want it but its much more expensive to upgrade after the fact instead as a combo. How can I get the combo price after the fact? I just got the Elements 13 about a week ago.  Thanks in advance for the help.

    Post Author: kcheeb
    CA Forum: Crystal Reports
    To get the previous price depends a lot on how you are able to get it from your database. If you can include it in the current prices data row, that would be the easiest.
    If not, the records would have to be sorted so that the previous price data row was either before or after the current prices data row. Then you could make use of CR's previous and next record functions.

  • How to Get Package Name While Running

    Hi
    i want to load Package Name to Table.
    So any idea about ODI Ref Function to get Package Name.

    Hi Nagarjuna,
    You can get package name by doing following steps, as per my knowledge, scenario name and package name both are same in ODI (while creating scenario for package).
    by the time you can retrieve scenario name as package name using below select query with selecting Work Repository schema in ODI variable
    QUERY:
    select SESS_NAME
    from <%=snpRef.getObjectName("L","SNP_SESSION","D")%>
    where SESS_NO = <%=snpRef.getSession("SESS_NO")%>
    Steps:
    1) create a project variable as Get_Package_Name and Data type as Alphanumeric, in Refreshing tab, type above select query and select work repository schema in schema (eg: create WorkRep logical schema in topology manager)
    2) Add Get_Package_Name variable with refresh in package (before interface step)
    3) Generate Scenario for package with same package name with version 001
    When you execute the scenario you can retrieve the package name in Get_Package_Name odi variaable
    Hope this may helps you
    Regards,
    phanikanth

  • How to differentiate design mode /running in extended component

    Hi,
    Is there a way to know if a component is render in the design
    mode of FB3? (Another post was done more than one year ago but no
    answer...)
    Regards

    Hi,
    in your code you can:
    boolean designtimeChecked = false;
    boolean isDesigntime = false;
    if (!designtimeChecked){
    //prevent this code being executed in designtime
    FacesContext fctx = FacesContext.getCurrentInstance();
    HttpServletRequest rq = (HttpServletRequest)fctx.getExternalContext().getRequest();
    isDesigntime = rq.getServerPort()==-1;
    designtimeChecked=true;
    later on you just call if (!isDesigntime){
    // execute code
    Frank

Maybe you are looking for