How do get privilege rights to convert a cd to my library

how do get privilege rights to convert a cd to my library

You don't need privilege rights.
Would you explain what is happening?
Any messages pop up?

Similar Messages

  • When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

    When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

    There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

  • Mouse/Trackpad/Trackpoint acceleration: How to get it right?

    I fail to get the acceleration for my mouse, trackpad and trackpoint right. It seems like having 100 interdependent knobs and trying to find some secret combination of values.
    I decided to use xset and xinput. For example:
    xset m 5 1
    xinput --set-prop 'device1' 'Device Accel Profile' 2 # Polynomial
    xinput --set-prop 'device1' 'Device Accel Constant Deceleration' 3
    xinput --set-prop 'device1' 'Device Accel Adaptive Deceleration' 2
    xinput --set-prop 'device1' 'Device Accel Velocity Scaling' 5
    ... 'device2' ...
    ... 'device3' ...
    After having tried a bazillion of different values in different combinations, I'd be extremely glad to receive a KISS recipe on how to get it right.
    Last edited by Markus00000 (2012-04-09 05:14:20)

    Hi Hickrock,
    1) Your material is 16 by 9 - drop a Compressor preset on there and it will recognise this and encode 16 by 9 which DVDSP will then recognise. Not sure how you got 4 by 3 in there unless you manually changed it to this.
    2) Get a bitrate calculator (Google it) and calculate the maximum allowable bitrate - depends on length and type of audio. I generally never use CBR and haven't noticed the difference.
    3) I usually get flickering on photos and graphics which I overcome with gaussian blur. Your flickering might be something to do with fields - try setting field dominance in Compressor to none rather than auto. Also switch on Frame Controls.
    This was just a fairly quick answer, there is more to it and I'm sure others will chime in.
    I personally have been having issues with Compressor - very good quality but occasional odd pixellation. The only reliable solution I have found, and it has been much discussed on this forum, is to use the Cinemacraft MP plugin.
    Good luck

  • When I type into Spotlight the name of a folder on the desktop, it doesn't appear in Spotlight. Could you please tell me how to get it right? Thank you.

    When I type into Spotlight the name of a folder on the desktop, it doesn't appear in Spotlight. Could you please tell me how to get it right? Thank you.
    And, what do I do if one of the harddisks on my Mini (2010, SL Server) starts misbehaving?

    Which security software (firewall, anti-virus) do you have?
    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps and allows to delete the Firefox program folder.

  • When I purchased a music app from itune store. This got downloaded in Itune maedia/Mobile applications.How to get the songs in that app to my  itune library or on to IPAD?

    I  or tranfer to my librarypurchased from Itune store a Music app. It is downloaded into intune media/mobile applications. How to get the full album msic/songs into my itunes library or on tomy IPAD? It doesnot open out. Can anybody suggest a way?

    If you have a music downloader app (depends on which you have), plug your iDevice into iTunes, go to your device (on itunes), go to your apps, scroll down, and select the app thats holding your music, click on "Save As" (should be located bottom right corner), save the music to your specific folder. Once done, follow through this: Adding music and other content to iTunes and you should have your music on your iDevice music app.
    Hope this helps.

  • How to get the right file name in an attachment

    I have design a program to get the attach file from an attachment. But when I click the link to save the file, the default name of the file is 'attach' whenever I get different files. Who know what is the problem, please tell me the truth.
    Here are some codes of the program.
    download.jsp
    <%="test.doc"%>
    web.xml
    <servlet-mapping>
    <servlet-name>AttachmentServlet</servlet-name>
    <url-pattern>attachment</url-pattern>
    </servlet-mapping>
    AttachmentServlet.java
    public void doGet
    Message msg = folder.getMessage(msgNum);
    // the message I get is right and the name of the file in
    // the attach in this message is right too.(I have printed)
    Multipart multipart = (Multipart)msg.getContent();
    Part part = multipart.getBodyPart(partNum);
    ContentType ct = new ContentType(sct);
    response.setContentType(ct.getBaseType());
    InputStream is = part.getInputStream();
    int i;
    while ((i = is.read()) != -1) {
    out.write(i);
    out.flush();
    out.close();

    The trick that I used is to append the URL with the name of the file. So if your url is "http://domain.com/attach", use "http://domain.com/attach/filename.doc". IE and Netscape parse the URL to determine what the filename is, so by placing this text at the end, you essentially let the browsers know what the filename is. :)
    I have design a program to get the attach file from an
    attachment. But when I click the link to save the
    file, the default name of the file is 'attach'
    whenever I get different files. Who know what is the
    problem, please tell me the truth.
    Here are some codes of the program.<< snip >>

  • How to get the right format if I copy data off another source....

    IWorks '08
    I have a data source that I want to copy to Numbers and it posts it all in the first row, when I paste it. (Excel will automatically format it correctly). I've tried a number of different things and can't figure out how to get the data to post across the page. Can Numbers even do this?

    Welcome to Apple Discussions
    Could you possibly have the insertion cursor blinking in the cell rather than just having a cell selected?
    If the cursor is blinking in the cell, Numbers "thinks" you want to paste all of the content in that one cell. By just selecting the cell, the data will be separated if Numbers "sees" the separations. This used to be a problem, particularly with data copied from a web page in Safari, but is mostly fixed in Numbers '09.

  • Does anyone know how to get a right ragged margin on this pages app?

    does anyone know how to make a right side margin ragged i.e. it does not break up any words.

    Use the left aligned text arrangement & make sure hyphenate is unchecked in the document inspector.

  • How to get the right graphics card on my macbook in order to play team fortress 2??!!

    does anybody know how to get a NVIDIA GeForce 8 or higher, ATI X1600 or higher, or Intel HD 3000 graphics card on a macbook, (mac OS X, version 10.5.8 with a 2.4 GHz intel core 2 duo, chipset model - GMA: X3100??? I desperately need to play team fortress 2 on my macbook!!

    alfie123lewis wrote:
    does anybody know how to get a NVIDIA GeForce 8 or higher, ATI X1600 or higher, or Intel HD 3000 graphics card on a macbook, (mac OS X, version 10.5.8 with a 2.4 GHz intel core 2 duo, chipset model - GMA: X3100??? I desperately need to play team fortress 2 on my macbook!!
    Buy a new one?
    Seriously, you can't upgrade a video card on a laptop, unless your a electronics whiz or something.
    The Intel HD 3000 is a integrated graphics, meaning the CPU does the graphics and isn't all that great because GPU's are more powerful than CPU's apparently.
    http://www.cbscores.com/index.php?sort=ogl&order=desc
    http://www.videocardbenchmark.net/high_end_gpus.html
    The most powerful vidoe cards are in desktop machines which you can exchange, and for less money Windows tower is a better 3D gaming platform as it comes with Windows when you buy the comptuer (a $300 savings) most games are on Windows because of the less expensive and open hardware.
    However!  If your into 3D gaming and need a Mac laptop, then you'll need a
    2.2 Ghz 15" MacBook Pro with 1GB Radeon 6750M video card or
    2.2 Ghz 17" Macbook Pro with 1GB Radeon 6750M video card.
    (2.3Ghz is fine too, not all that much faster really)
    This Radeon 6750M is THREE times faster than the pitiful Intel HD 3000. 
    The object being is you buy as much video card performance up front as you can, and play all the latest games at over 50 fps on max settings!
    Then over time as new games come out and demand more hardware, you trim down the graphics in the game itself to keep the frame rate up.
    Eventually though, you'll have to buy a new MacBook Pro, because you can't (reasonably) change the video card in laptops like you can with a desktop like a Windows PC tower or a MacPro.
    The iMac you can't do squat with neither. Which is a shame actually.

  • How to get the right Serial Number during Pick Release

    Please we need your help to get the right serial number => Auto-Allocate on YES, Pick Confirm with NO.
        A problem is occurring during the Pick Release process.  Custom code has been added to the hook INV_DETAIL_SERIAL_PUB to provide the Pick Release process with the serial number to pick for the item being pick released.  The hook works and the Pick Release process picks the correct (specified) serial number.  However, at some point later in the Pick Release process the lot number is chosen and the process seems to pick the first lot number it finds available for the item – it does not take into account the serial number provided by the hook.  This causes the Pick Release process to fail when the lot number chosen is not the lot number linked to the serial number.  Has anyone else encountered this same issue?
        An example:
    Item ABC123
    Serial SER001 – Lot LOT001
    Serial SER002 – Lot LOT002
    Serial SER003 – Lot LOT003
    Item ABC123 is being pick released.
    The customised hook provides the Pick Release process with serial SER002.
    The Pick Release process correctly uses SER002, but chooses lot LOT001.
    thanks!
    Francisco

    Hi,
    I guess you have added the code at slightly different place.
    Pick Release Process will always allocate lots based on Inventory Picking Rule (or WMS Pick Strategy if you are using WMS).
    So if you want to override that you much first delete the MTLT record (inv_trx_util_pub.delete_lot_ser_trx), then insert MTLT with your Lot number (inv_trx_util_pub.insert_lot_trx)..then insert MSNT (inv_trx_util_pub.insert_ser_trx) with your serial number.
    Ensure that transaction_temp_id on MSNT should match with SERIAL_TRANSACTION_TEMP_ID on MTLT table.
    Thanks,
    Hrishi

  • How to Get a Video Thumbnail preview image in sharepoint Asset Library

    namespace ConsoleApplication3
    class Program
    static void Main(string[] args)
    using (var site = new SPSite("http://contoso/sites/teams"))
    using (var web = site.OpenWeb())
    var list = web.Lists.TryGetList("Videos");
    var videoProperties = new Dictionary<string, object>();
    videoProperties["Keywords"] = "Intranet Video";
    //videoProperties["AlternateThumbnailUrl"] = "/_layouts/images/preview.jpg";
    UploadVideo(list, @"C:\Downloads\Video3.mp4", videoProperties);
    public static void UploadVideo(SPList list,string fileName,IDict ionary<string,object> properties)
    SPFile file;
    using (var fileStream = File.OpenRead(fileName))
    var urlOfFile = SPUrlUtility.CombineUrl(list.RootFolder.ServerRelativeUrl, Path.GetFileName(fileName));
    file = list.RootFolder.Files.Add(urlOfFile, fileStream, true);
    list.Update();
    //listid = list.ID.add();
    SPListItem listItem = list.GetItemById(file.ListItemAllFields.ID);
    //SPListItem listItem = list.GetItems("Video3");
    var videoContentType = list.ParentWeb.Site.RootWeb.AvailableContentTypes["Video"];
    // listItem["ContentTypeId"] = videoContentType.Id;
    foreach (var property in properties)
    listItem[property.Key] = property.Value;
    listItem.Update();
    in this code "SPListItem listItem = list.GetItemById(file.ListItemAllFields.ID); " im getting null reference exception.an i have tried with other line "var listItem = file.ListItemAllFields;" same error.any one help me to get solve this
    issue.And how to Get a uploaded video Thumnail image.

    Hi,
    I did a test with your code in my environment and it works fine.
    For a better troubleshooting, I suggest you debug your code step by step. You may need to check if file.ListItemAllFields.ID is valid.
    If you want to get video Thumnail image, there is a column named Preview Image URL, the internal name of the field is AlternateThumbnailUrl.
    You can get the field value using Sever Object Model like below.
    String url = item[“AlternateThumbnailUrl”].ToString();
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/251974d8-18ac-4ff9-88a2-633b5bd80fce/get-asset-library-column-value-preview-image-url-programmatically?forum=sharepointgeneralprevious
    More information about how to get list item using Server Object Model:
    http://msdn.microsoft.com/en-us/library/office/ms460897%28v=office.14%29.aspx
    Best regards,
    Zhengyu Guo
    Zhengyu Guo
    TechNet Community Support

  • How to get privilege infomation

    Dear all,
    I want to get all privilege infomation in oracle,how can i get? there are some dic view?

    user7244870 wrote:
    Dear all,
    I want to get all privilege infomation in oracle,how can i get? there are some dic view?It is unclear if you want to see all privileges that have actually been granted to someone/some role, or all privileges that are available to be granted.
    If, by 'dic view' you mean 'dictionary view', the full data dictionary is documented in the Reference Manual. Just read down the table of contents for a view name that looks promising.

  • 1080p to SD DVD - how to get it right?

    Hi,
    I need to create a DVD out of a 86 minute show cut on a Media Composer. End result will be a SD DVD that will go out to a copy house, who will create the copies for us from a glass master. The producer is not sure at the moment, whether to use a dual layer DVD for both the main film and the bonus material, or two dual layer DVDs, as that would mean a more relaxed bit budget would be in order. Material is 1080p25 and encoded DNxHD 120 MXF.
    At the moment, we export the sequence to a QT film, ProResHQ codec, then let compressor encode the resulting file. Squeeze crashes, and any other export option on the Avid, too. A bug, but there we go. ProRes looks jolly good, anyway.
    1) I am a bit puzzled now, what settings I should use in Compressor. Using a 4:3 aspect ratio, I get a 720x576 (PAL-land) file that is anamorphic.
    Using the 16:9 aspect ratio, I get 720x404 files. Which is the better option, seeing as in DVDSP I choose 16:9 letterbox for the track.
    2) Also, I have so far stuck to CBR at a setting of around 6.2 MBps, but those were shorter projects. A long time ago, VBR seems to have produced artifacts, so I stuck to CBR ever since. Is VBR a better option on such a long project? And what bit rates might be advisable to use?
    3) On some scenes, where there are fine structures like pebbles on the ground, I get some kind of a flickering effect. I remember reading somewhere that people import HD films into FCP and apply a small amount of channel blur before sending the film to compressor. Is that a good idea?
    Any thoughts or criticisms are welcome!!!!!!!!!!!!!!!!!!!
    Many thanks in advance,
    Colin

    Hi Hickrock,
    1) Your material is 16 by 9 - drop a Compressor preset on there and it will recognise this and encode 16 by 9 which DVDSP will then recognise. Not sure how you got 4 by 3 in there unless you manually changed it to this.
    2) Get a bitrate calculator (Google it) and calculate the maximum allowable bitrate - depends on length and type of audio. I generally never use CBR and haven't noticed the difference.
    3) I usually get flickering on photos and graphics which I overcome with gaussian blur. Your flickering might be something to do with fields - try setting field dominance in Compressor to none rather than auto. Also switch on Frame Controls.
    This was just a fairly quick answer, there is more to it and I'm sure others will chime in.
    I personally have been having issues with Compressor - very good quality but occasional odd pixellation. The only reliable solution I have found, and it has been much discussed on this forum, is to use the Cinemacraft MP plugin.
    Good luck

  • How to get .ocp file when converting sql database to oracle database?

    Hi all,
    Hope doing well,
    sir i am using sql developer tool for migration from sql server to oracle
    i am using this offline but i don't know how to create .ocp file
    please help me.
    it's urgent
    waiting for reply.
    thanks in advance.

    The OCP files are created during OFFLINE Migration. In SQl Developer click on Tools -> Migration -> Create Database Capture Scripts. Choose an output directory, make sure to select the correct platform (Windows) and select MS SQl Server from the drop down list.
    You'll get in the directory specified earlier the batch and OCP files required to create the source model using the offline method.
    Have a look at this web site: http://www.oracle.com/technetwork/products/migration/sqlserver-095136.html
    It contains more info including a link to a video demonstrating the offline capture method.

  • How to get privileges

    create table COMFORT (
    2 CITY VARCHAR2(13),
    3 SAMPLEDATE DATE,
    4 NOON NUMBER,
    5 MIDNIGHT NUMBER,
    6 PRECIPITATION NUMBER
    7 );
    RROR at line 1:
    RA-01950: no privileges on tablespace 'SYSTEM'
    Message was edited by:
    user628902

    Looks like the user dosen't have the permission to create the objects on SYSTEM tablespaces.
    By the way, what's the user's default tablespace?
    SELECT default_tablespace FROM dba_users WHERE username='<Username>';
    Creating tables in SYSTEM tablespace will cause performance problem, and SYSTEM tablespace is exclusively for SYSTEM related objects.
    What privileges have been granted to that user?
    Otherwise, use TABLESPACE in the table creation and specify any other tablespace other than SYSTEM tablespace.
    And also, grant the following privileges.
    Login as SYSDBA
    ALTER USER <username> QUOTA 100M ON <tablespace name>
    GRANT UNLIMITED TABLESPACE TO <username>
    Regards,
    Sabdar Syed.

Maybe you are looking for