How do get your applications that you create in x code to you iphone

How do you get your applications that you create in x code to your iphone so it can be tested?

Use the resources you paid for in the iOS Dev Center...
Xcode Overview
Run Your App

Similar Messages

How do you get your information, that's on your icloud, something was taken off my notes that should be back-up in my icloud. Help

How do you get your information, that's on your icloud, something was taken off my notes that should be back-up in my icloud. Help

The syncing of Notes, isn't a back-up. All it does is to sync Notes to other devices. Whether being a Mac, another iOS device or icloud.com
This is the same with Contacts, Calendars and what not.
KOT

HT201272 How do you get your files that are hidden in the cloud?

How do you get your files that are hidden in the cloud?

What files are you looking for?
GB

How can I get a movie that I created in IDVD to load in ITunes and stream to Apple TV?

How can I get a movie that I created in IDVD to load in ITunes and stream to Apple TV?

Welcome to the Apple Community.
You can't, but you have a few alternatives.
Best option: If you made the movie on the DVD in iMovie (or even another editing application) and still have the project, go back to the project and export it for Apple TV (using the Apple TV preset)
Next best option: If you still have the original movie that you put on the DVD, open it in QuickTime and export it for Apple TV (using the Apple TV preset)
Worst option: Use something like Mpegstreamclip (Quicktime Mpeg2 playback component required) to convert the DVD to h264.

How to get a field that using variable in order to create a query

Hi,
I found a difficulty when creating a query. so, I would like to ask you some question.
1. How to get a field that using variable which that field I want to put it in my query?
For example, I would like to take quantity field in inventory audit report. And when I put my cursor in
quantity field, there was only variable, item, etc. How to get this and put it in query?
2. How to combined the invoice quantity with inventory audit report quantity?
3. I have a query like this:
SELECT distinct T0.[DocDate] as 'Tanggal', T0.[DocNum] as 'No.Faktur', T1.[ItemCode] as 'Kode Barang',
T1.[Dscription] as 'Deskripsi', T1.[Quantity] as 'Quantity', ((T1.[LineTotal])/(T1.[Quantity])) as 'Harga
Satuan', T1.[LineTotal] as 'Harga Total', T3.[CalcPrice] as 'HPP Satuan', ((T3.[CalcPrice]) * (T1.
[Quantity])) as 'HPP Total', T4.[ItmsGrpNam] as 'Jenis Barang', T5.[SlpName] as 'Nama Sales', T1.
[WhsCode] as 'Kode Gudang' FROM [dbo].[OINV] T0 INNER JOIN [dbo].[INV1] T1 ON T0.DocEntry =
T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OINM T3 ON T2.ItemCode
= T3.ItemCode INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod INNER JOIN OSLP T5 ON
T0.SlpCode = T5.SlpCode WHERE T3.[TransType] = '13' and T3.[CreatedBy] = T1.[DocEntry] and T0.
[DocDate] >=[%0] and T0.[DocDate] <=[%1] and T4.[ItmsGrpNam] =[%2] and T1.[WhsCode] =[%3]
Is it possible if I just take one invoice with invoice quantity and only show up at once although I have a
lot item cost for that item? (because I'm using FIFOmethod).
Please help me.. cause I'm stuck with this thing :l.
Thank you very much, and I'm waiting your respon soon.
Regards,
Sisca

Try this one:
SELECT distinct T0.DocDate as 'Tanggal', T0.DocNum as 'No.Faktur', T1.ItemCode as 'Kode Barang',
T1.Dscription as 'Deskripsi', T1.Quantity as 'Quantity', ((T1.LineTotal)/(T1.Quantity)) as 'Harga
Satuan', T1.LineTotal as 'Harga Total', T3.CalcPrice as 'HPP Satuan', ((T3.CalcPrice) * (T1.
Quantity)) as 'HPP Total', T4.ItmsGrpNam as 'Jenis Barang', T5.SlpName as 'Nama Sales', T1.
WhsCode as 'Kode Gudang'
FROM dbo.OINV T0 INNER JOIN dbo.INV1 T1 ON T0.DocEntry =T1.DocEntry
INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode
INNER JOIN OINM T3 ON T2.ItemCode = T3.ItemCode AND T3.TransType = '13' and T3.CreatedBy = T1.DocEntry AND T3.Warehouse = T1.WhsCode
INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod
INNER JOIN OSLP T5 ON T0.SlpCode = T5.SlpCode
WHERE T0.DocDate >=[%0\] and T0.DocDate <=[%1\] and T4.ItmsGrpNam =[%2\] and T1.WhsCode =[%3\]
Thanks,
Gordon

Does anyone know how to get an application you had once without using App Store?

Does anyone know how to get an application you had once without using App Store?
Because I'm underage and I couldn't get it back.
I just want it back, I'm not going to use any money in App Store...

When you say you "had it once", how did you get it then? The App Store has only been around for a few years, so there are lots of apps out there that you would once get from the developer, but now they're only available on the App store. Which app(s) are you referring to?

I do not know how to get the music that I buy on itunes, on my mac, onto an ipod. I have already authorized my computer and "downloaded" my music, but that did not do anything. Please I really need to know how to do this on my own but I am stuck.Thank you

I do not know how to get the music that I buy on itunes, on my mac, onto an ipod. I have already authorized my computer and "downloaded" my music, but that did not do anything, or provid the results that I was expecting, at least. Please, I really need to know how to do this on my own but I do not know what to do.Thank you in advance to anyone that is answering this question that I know most everyone but me knows how to accomplish. thanks!!!

In iTunes go to the Help menu in the upper menu bar. Then click on iTunes Help. Then on Sync your iPod, iPhone or iPad and follow the instructions.

HT2474 when I am opening any application including safari, these icons are not showing in dock, how to get open applications in my dock?

when I am opening any application including safari, these icons are not showing in dock, how to get open applications in my dock?

This could be a plist corruption problem, but I'm not sure.
Sometimes, the preference list files get corrupted. You can usually just remove them and they'll get re-created. This may require you to reset certain settings. A notable exception to this is the Mail plist which actually stores the Library structure of your email accounts. Deleting the Mail plist will definitely cause lots of problems, but is recoverable.
The plist files are stored in the /Users/username/Library/Preferences/ folder. They usually have the naming convention of com.company.programname.plist.
A simple troubleshooting technique is to move a suspect plist file out of the Preferences folder and start up the app, again. It will re-create the plist from scratch.
In your case, I would try the com.apple.dock.plist. You can use Activity Monitor to kill the Dock app and it will restart. Or, you can log out and log back in.
There is a new file with Leopard called com.apple.dock.db. I haven't figured out what it does, but you might try moving it out. If anything gets worse, you can move the old file back in replacing the newly created one.
This all sound somewhat odd, so I don't know if this will help.

How to get PDF file that has been transformed into docx into my filing system so I can work on it???

How can I get the PDF file that was transformed into a docx file into my filing system to be able to work on it and translate it as the customer requested?

THanks for your reply.
Well what happens is I bought the program. It gives you a button to click,
you log in and then a box opens up asking you to select the file, I go into
my filing system (in Windows explorer) select the file, and the program
converts it into docx, my choice. I can read it there and when I try to
copy and paste it into my file where the PDF version is saved, it behaves
like an "image", and I can't save it.... or it saves likes something you
save on the internet, so you have to go into internet every time you want
to see it. I have also pressed any amount of buttons to see if it will
give me the option to save it any other way, and have found nothing. What
I would need is a file in docx.format that I can edit. People send me
things in PDF and sometimes I can just copy it off the PDF file and save it
in WOrd, then I can translate it for them. But sometimes the PDF file
doesnt allow me to copy the text. If it is in image form, I cannot work on
it. It means printing it, so I can copy type it into Word... and for that
I certainly wouldnt need to buy a program. Its just double the work and
ends up that the job takes twice as long.!
Sorry if I am a bit dumb with informatics. But I simply could not find
any way whatever to copy the PDF file that was transformed into Word, in a
format that would enable me to edit it.
Kindest regards,
Margery
2013/12/2 Test Screen Name <[email protected]>
Re: How to get PDF file that has been transformed into docx into my
filing system so I can work on it???
created by Test Screen Name<http://forums.adobe.com/people/TestScreenName>in *Adobe
ExportPDF* - View the full discussion<http://forums.adobe.com/message/5890871#5890871

How to get IHTMLDocument2 of each newly created tab?

Hi there,
I'm working on an C++ IE automation application that opens multiple URLs. Each URL is opened in a new tab of the same IE instance. My problem is: How do I get a IHTMLDocument2 of each tab that the application just created? When I use the same IWebBrowser2
interface to open the tabs in the same IE instance, I always get the IHTMLDocument2 of the first tab.
This is what I do:
1. Call the CoCreateInstance method for the "InternetExplorer.Application"
2. QueryInterface from "InternetExplorer.Application" to IDispatch
3. QueryInterface from IDispatch to IWebBrowser2. For each URL that should be opened, I call the navigate-method on the same "IWebBrowser2"-interface. The navigate-method has a FLAGS-parameter, which I set to "navOpenInNewTab" in order
to open new tabs each time I call the method.
This all works fine, except that I'm not able to get the IHTMLDocument2 of each tab I just created. As I just said, I'm performing multiple calls to the navigate-method on the same "IWebBrowser2"-interface in order to open the new tabs in the same
IE-instance. But when I call the get_Document-method on the "IWebBrowser2"-interface, I always receive the document of the first tab. How can I get the document of the second, third, etc. tab?
Any suggestions?

problem is 1 there isn't an event for browser saying "NewTabCreated" and even if you wrote one, you would have a hard time sending anything to the outside of the sandbox without extra accommodation (e.g. create a named pipe then grant access to
low integrity level processes).
Why the methods mentioned above won't work reliably:
IShellWindow is broken since Vista (Only trusted sites running in normal
integrity level would be displayed)
As a Windows Message, WM_HTML_GETOBJECT would be subject to
User Interface Privilege Isolation which has the same blocking effect.
DWebBrowserEvents2::NewProcess is best as a tab creation is guaranteed at this time, but
a new process is not guaranteed when you create a new tab so you would miss some tab creations.
Visual C++ MVP

After installing an application that was created using the Application Builder

After installing an application that I created using the Application Builder I get this error if I try to run " ANY " LabVIEW App's that I have built. "Executable Version 7.1.1 doesn't match Resource File 7.1. Check your configuration."
The way that I tried to fix this is to reload LabVIEW 7.1 and DAQmx 8.0. I am using two NI-6528 switch cards.
After I reload LabVIEW and DAQmx I can run my applications but as soon as I install one on this development machine the error begins again.
The executable that I built works fine on the development machine and any other machine that I try it on but it appears that the Run-Time engine 7.1 becomes corrupt after I run setup.exe for the newly created application.
I have built numerous Installers, setup.exe's in the past without this error. Just this latest one caused this problem to start.
I can NOT upgrade to 7.1.1. I am doing work for many different sections of this factory and I can not force them to upgrade. I've asked. Others supply code for the same machines using LabVIEW 7.1.
I am stuck creating executables and manualing moving the correct files to the target machines.
What can be done?

No. The KB article was talking about a machine with 7.1.1 installed. I have LabVIEW 7.1 installed.
The machine that I am having trouble with is my development machine. LabVIEW 7.1, DAQmx 8.0.
If I build the executable all is fine. I can still run old executables including the one I just built.
If I create the installer all is fine. I can still run old executables including the one I just built.
When I install the app on my development machine the corruption occurs. I can " NOT " run old executables including the one I just built. The subject error pops up.
I have not moved any executables to the other machines yet. I don't want to corrupt others.

Can someone tell me how to get my apps that are on my ipad to appear on my TV using Apple Tv

Can someone tell me how to get my apps that are on my IPad to be viewed on my Apple TV?

Welcome to the Apple Community Coachcad.
Basic AirPlay: Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
Mirroring: When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), swipe from the bottom of the screen, tap the AirPlay icon and choose your Apple TV from the list of devices (iOS 7 or better) or double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices (pre-iOS7)

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?
Hi,
I do generate XML-Files by using DBMS_XMLGEN with output by UTL_FILE
but it seems, the xml-Datafile I get on end is not really UTF-8 encoding
( f.ex. cannot verifying it correct in xmlspy )
my dbms is
NLS_CHARACTERSET          = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET     = AL16UTF16
NLS_RDBMS_VERSION     = 10.2.0.1.0
I do generate it in this matter :
declare
xmldoc CLOB;
ctx number ;
utl_file.file_type;
begin
-- generate fom xml-view :
ctx := DBMS_XMLGEN.newContext('select xml from xml_View');
DBMS_XMLGEN.setRowSetTag(ctx, null);
DBMS_XMLGEN.setRowTag(ctx, null );
DBMS_XMLGEN.SETCONVERTSPECIALCHARS(ctx,TRUE);
-- create xml-file:
xmldoc := DBMS_XMLGEN.getXML(ctx);
-- put data to host-file:
vblob_len := DBMS_LOB.getlength(xmldoc);
DBMS_LOB.READ (xmldoc, vblob_len, 1, vBuffer);
bHandle := utl_file.fopen(vPATH,vFileName,'W',32767);
UTL_FILE.put_line(bHandle, vbuffer, FALSE);
UTL_FILE.fclose(bHandle);
end ;
maybe while work UTL_FILE there is a change the encoding ?
How can this solved ?
Thank you
Norbert
Edited by: astramare on Feb 11, 2009 12:39 PM with database charsets

Marco,
I tryed to work with dbms_xslprocessor.clob2file,
that works good,
but what is in this matter with encoding UTF-8 ?
in my understandig, the xmltyp created should be UTF8 (16),
but when open the xml-file in xmlSpy as UTF-8,
it is not well ( german caracter like Ä, Ö .. ):
my dbms is
NLS_CHARACTERSET = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET = AL16UTF16
NLS_RDBMS_VERSION = 10.2.0.1.0
-- test:
create table nh_test ( s0 number, s1 varchar2(20) ) ;
insert into nh_test (select 1,'hallo' from dual );
insert into nh_test (select 2,'straße' from dual );
insert into nh_test (select 3,'mäckie' from dual );
insert into nh_test (select 4,'euro_€' from dual );
commit;
select * from nh_test ;
S0     S1
1     hallo
1     hallo
2     straße
3     mäckie
4     euro_€
declare
rc sys_refcursor;
begin
open rc FOR SELECT * FROM ( SELECT s0,s1 from nh_test );
dbms_xslprocessor.clob2file( xmltype( rc ).getclobval( ) , 'XML_EXPORT_DIR','my_xml_file.xml');
end;
( its the same when using output with DBMS_XMLDOM.WRITETOFILE )
open in xmlSpy is:
<?xml version="1.0"?>
<ROWSET>
<ROW>
<S0>1</S0>
<S1>hallo</S1>
</ROW>
<ROW>
<S0>2</S0>
<S1>straޥ</S1>
</ROW>
<ROW>
<S0>3</S0>
<S1>m㢫ie</S1>
</ROW>
<ROW>
<S0>4</S0>
<S1>euro_</S1>
</ROW>
</ROWSET>
regards
Norbert

Hi can anyone help me how to get facetime application for iphone 4s

Hi
can anyone help me how to get facetime application for iphone 4s since i am not able to find it.

FaceTime is builtin, there's no icon. Use your Contacts app and if the recipient has iPhone 4/4S, iPod Touch 4th G, iPad 2 or Mac, you can FaceTime them using Wi-Fi.
Message was edited by: ckuan

TS1702 How do I get an app that I paid for transferred over to my iPhone? I paid for it and its not able to be used on iPad!

How do I get an app that I paid for transferred over to my iPhone? I paid for it and its not able to be used on iPad!

Assuming you're using the same Apple ID, just download it onto your iPhone.

How do get your applications that you create in x code to you iphone

Similar Messages

Maybe you are looking for