How do I accept strike though edits

I have a document wich strike throughs which I want to accept.
How do I accept the edits. and get rid of the strike though line.

Here's a tutorial on the round-trip process between Word and Acrobat (on Windows). Talks about Acrobat X but the same applies to Acrobat XI.

Similar Messages

How can I use Elements as Edit in using a Lightroom?

How can I use Elements as Edit in in Lightroom using a Lightroom picture. I followed instructions: Photo/Add in/ and received in Elements a blanco screen instead of the picture selected in Lightroom. Please further instructions before ordering Elements 11.

Dear Andaleeb,
I have followed instructions as follows: In Lightroom I have installed Elements under extra plug inns. (on top of the screen reference is made to Photoshop and not Photoshop 11). Under photo, cmd-e does not work since Photoshop is colored gray. As I have Elements installed under extra plug-inns this is highlighted. BUT………..Clicking that, the picture selected does NOT appear in Elements. The screen remains being empty! How can I solve this?
Mr. F.K.A. de Haan
Op 4 mrt. 2013, om 14:50 heeft andaleebfatima1 <[email protected]> het volgende geschreven:
Re: How do I use Elements as a plug in for Lightroom? After plugging no picture appears in Elements!
created by andaleebfatima1 in Photoshop Elements - View the full discussion
Please ensure that you have added PSE Editor as external editor for Lightroom. See : http://www.photoshopelementsuser.com/html/integrate-lightroom-with-ele ments/
Thanks
Andaleeb
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5119785#5119785
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5119785#5119785
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5119785#5119785. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

How do I accept/reject green/red changes in a FM CMP Compare Document

I am working in FM 11 and needed to merge one file that two writers worked on at the same time with different sections of that file updated. I used the FM Utility > Compare Documents. The result CMP file showed me the inserted text in bright green and the deleted text in red. How do you accept/reject these changes? My workaround is to retype what I wanted to keep and select and delete text I wanted to delete.
I also tried to use SVN update to merge the files, but SVN didn't seem to be able to merge my two files (even though SVN merged a text file that user 1 UPDATED before they COMMITTED their change. The UPDATE merged the changes from writer 1 to the working copy from writer 2 without disturbing writer 2's changes. Then writer 2 was able to COMMIT. But this only worked on a TXT file and did not work with FM files. With FM, SVN just would not let writer 2 UPDATE if his copy was not in sync with the committed copy.
Ideally I would like to be able to merge changes on the same file from two writers who updated different sections. Any suggestions? Thanks.

Another approach:
FrameMaker uses the conditions Inserted and Deleted to mark inserted and deleted text in the CMP file.
In the Search/Replace dialog select the Deleted condition for deleted text to search for.
Leave the Replace box empty.
Then search for the Deleted condition and either replace (i.e. delete the text) or leave it as it is.
After this search/replace the remaining text with the Deleted condition is correct. Therefore delete this condition without deleting the text.
Then do the same with the Inserted condition for inserted text. Either delete this text or leave it as it is.
Then delete this Inserted condition.

How do I change the Not Editable flag of a variable?

How do I change the Not Editable flag of a variable? I need to edit the variable but right now the Not Editable box is checked.

You can't do it unfortunately. That's why it pops up a warning when you check it in the first place.
Ok seriously though there is a workaround for this. It's a total hack but may get you back to where you need to be without having to copy everything to a new sequence file.
WARNING: Not sure what versions of TS this will work with.
With the offending sequence file open go to Edit>>Sequence File Properties.
On the General tab change the File Format to XML.
Click OK.
Save the sequence file.
Now browse to where you saved the sequence file and open it with Notepad.
Search for FileGlobal and look for the offending variable. <MyGlobal classname='Num' valueflags='1'>
It should have a property called valueflags. It will be valueflags='1'.
Remove that property altogether. So it should be something like this: <MyGlobal classname='Num'>
Save it and reopen it in TestStand.
You may need to change it back to binary format from within TestStand.
If deleting it gives you problems then just change the valueflags to 0.
Hopefully this helps.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How to make a select list editable or searchable like the combobox

Does anybody know, How to make a select list editable or searchable like the combobox? Do we need a plugin here, where I can get it.

Hi Nilesh,
If this is what you are looking for http://apex.oracle.com/pls/apex/f?p=32395:3:1202144397644679
get the combobox plug-in
http://www.apex-plugin.com/oracle-apex-plugins/item-plugin/searchable-combobox.html
I have not tried this though. Found it while searching for some other plug-ins.
Regards,
-Senthil

When I attempt to access my IRA account on line, I get a message saying that the web site requires a client certificate. The certificates listed in the drop down dialog box don't get accepted, even though one is indicated as valid and good until 10/2014.

When I attempt to access my IRA account on line, I get a message saying that the web site requires a client certificate. The certificates listed in the drop down dialog box don't get accepted, even though one is indicated as valid and good until October 2014. I contacted the IRA account managment company and they sais it's an Apple issue. Any ideas?

Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP.

How to connect my n70 music edition to my pc

how to connect my n70 music edition to my pc. there is no cable provided.

Install pcsuite to a laptop with blutooth or desktop with bluetooth dongle. Activate the bluetooth on the phone then pair it.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

How do I remove an extra editable region in the head of a specific page?

I have a single-template website. My template has the standard two editable regions in the head ("title" and "head"). Somehow, one of my pages ended up with three editable regions in the head - two named "head" as well as title. My template won't update this page because the editable regions don't match. How do I remove this extra editable region from the head of the page? I can't modify it on the page itself, of course, and I can't remove it by modifying the template because it's not part of the template.
Thanks in advance!

Your child page would not contain any editable regions if it wasn't attached to a Template. Perhaps you nested templates which is the wrong thing to do.
Go to Modify > Templates > Detach from Template.
Nancy O.

How do I accept an event that shows up in my iCal inbox?

When I enter an event into my iCal it shows that there is a message in my iCal inbox. How can I accept or remove it?

iTunes prefs > Store.
Tick Show iTunes in the Cloud purchases.
If it's not there. log out then log back in.
Now go to Movies and you should see your purchases with a cloud icon next to the items that are not on your computer..
Click the cloud icon to download the movie.

How do I install the video editing program I just bought from Adobie?

How do I install the video editing program I just bought from Adobie?

Mylenium
Thanks for the response. My system is Windows 7 with a painfully slow ATT
high speed connection.
I got the "Cloud" including CS6 , yesterday,after a chat with a nice Indian
fellow who called me back from Bombay. Surprisingly he was looking forward
to Thanksgiving too but probably because he gets a day off.
I now have the Adobe Premiere Pro loaded (it took nine hours) and
installed. Now I'm starting the tutorials.
Hopefully I'll be editing soon.
Thanks again
Lyman Dave

How do I install Adobe digital editions on my iPad?

How do I install Adobe digital editions on my iPad?
I have an IPad Air 2, iOS 8.1.2. I ordered some ebooks that required the download of Adobe Digital Editions. I select the supplied link to the Adobe site, select download, and I am given the option of windows or Mac OS. I wandered through the site and even googled an iOS version with no luck. I thought maybe the Mac OS version might be universal to apple products so I downloaded it and tried to open it in One Note, One Drive, and Google My Drive with no luck. The .dmg file is not recognized. So, I'm back to looking for an iOS version. Is there one?

You can find an iPad version of Adobe Digital Editions in the app store on the iPad. I was able to download it and install it tonight. I followed the instructions in the included User's Guide to copy a book that I had first downloaded to my Mac over to DropBox. From the DropBox app on the iPad, I opened the book with ADE successfully. You might also look at the BlueFire reader; I've seen that recommended a number of places. I was just able to open the same book from DropBox in BlueFire. For both ADE and BlueFire, you will have to authorize your iPad to Adobe with an Adobe ID and pw. Good luck.

How to stop the Calendar from editing your input?

How to stop the Calendar from editing your input?

I am constantly finding that Calendar Version 8.0 thinks it knows what I want to type but it incorrectly takes numbers and days and times out of my input and changes my appointments. I hate this new supposedly "smart" feature. Even when I edit my event correctly a second or third time it rewrites my input incorrectly again. I have to use my iPhone to override the annoying editing on my mac. I am ready to find a new calendar program unless Apple allows users to input what they want without their information being incorrectly edited.

How to install in linux Enterprise Edition 6.0

How to install in linux Enterprise Edition 6.0

Hi Dipendra,
For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT user id creation and roles assignment and RFC destination creation etc..
Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
You can start by read the note 736902 to get the credentials for the ADS.
Hope this answers your question.
Thanks,
Greetson

How to use same view as editable and read only in ADF

Hi,
how to use same view as editable and read only in ADF ?? How can we achieve this in TF's ???
-mrudul

Hi,
Steven Davelaar wrote a presentation about this "Building Highly Reusable Taskflows"
Starting slide 14 is where your use case comes into play
Frank

How do I accept strike though edits

Similar Messages

Maybe you are looking for