How do I access 11i (11.5.9) in Linux Mozilla?

How do I access 11i (11.5.9) in Linux Mozilla or netscape?
I heard that we need to install JRE 1.4.2 plug-in?
Any help on install JRE steps?
Thanks,
Jiltin

Hi
In order to access from Mozilla you need JDK 1.4.1 or more on client .
Apply patch 2803131 on server & apply below changes in appswe_<hostname>.cfg
sun_plugin_mimetype=application/x-java-applet;jpi-version=1.4.1_01
sun_plugin_classid=clsid:CAFEEFAC-0014-0001-0001-ABCDEFFEDCBA
Then create soft link
/usr/java/jre/plgin/i386/<all directories>/libjava_oji.so to /usr/mozilla/plugin/.
where /usr/java/ is you jdk installation location
Please update if your mozilla crashes.
Atul
Apps DBA
in your

Similar Messages

How do I access BSD file tree from within Linux?

I just installed PC-BSD 8.0 RC on an external USB HDD. I went with the PC-BSD default partition layout, i.e. one primary partition for the entire PC-BSD slice, and 4 "partitions" within that slice, for /, swap, /usr and /var.
In order to access the PC-BSD file tree from within Linux, I mount it as follows:
mount -t ufs -o ufstype=ufs2,ro /dev/sdb1 /mnt/bsd
But after executing this command I can only access the PC-BSD / , not /usr and /var , presumably because they reside on two BSD "partitions" (subslices) different from / . Is there any way I can mount these (read-only) in Linux, too, or would I have to reinstall PC-BSD and opt for laying out the slice differently, i.e. specifying only / and swap in sdb1?
Last edited by RobF (2010-02-13 11:55:39)

Look at /dev/sdb* there should be more than just sdb1. You would need to mount those to see which is which. For ufs write support the default kernel needs to be recompiled with experimental enabled.

Is there a way to access 11i from outside other than Self service?

Is there a way to access 11i from outside other than Self service?
I could connect any application from inside the firewall (basically router) and can not access screens from outside. Eventhough port forwarding 80 allows us upto initial screen, it does not go further.
Any workaround/suggestions
Jiltin

Hi Jiltin,
If you can migrate your forms server into Forms Listener Servlet.This will allow you to use forms outside firewall provided atleast one port(assuming yours 80) is open.
Ref to the M.Link Note 201340.1 for how to setup forms listener servlet.
Magesh

How do I access the web utility with model cisco sf302-08p ?

Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

restore the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

Help! I am making an iPhoto book and all of a sudden it will not open and I get a huge error message which is supposedly sent to Apple. How do I access that site????

Mac osX 10.6.8
iBook - old version
can not access Safari - going through Chrome
All of a sudden my IBook would not open (100 pages and almost finished)
Error message sent to Apple - how do I access them??????
Thank you for any help you can give me
<Email Edited by Host>

Do you mean, you have been creating a Photo Book in iPhoto? Or an iBook in iBook Author?
If you are asking about a photo book in iPhoto, what was the last you did in iPhoto, before the crash happened? Did you add a page with a map?
Then you may have a problem with a bug, where adding a route to a map may render the book unreadable. In that case the best option is to restore the iPhoto library from the last backup you made, before you added the map to the book.
It is not possible to open the book and to delete the unreadable page. You can only delete the book and start over, if this bug is the reason for the crashes. See for example this link: Getting rid of problem photo book

How can I access my iCloud account on the web from my phone

how can I access my iCloud account on the web from my phone
iPhone 5 iOS 8.3
I have iCloud turned on, location services on, find my phone works but when I try to access iCloud via Safari on the phone it takes me to a page Apple.com,
iCloud then three options
set up iCloud on my phone (i have)
Install Find my phone, it is installed and it works from my MBP
or install find my friends, I don't need that I have no friends.
my calendars and contacts and bookmarks and all are all sync'd and working on the phone, but i thought if I typed in iCloud.com on the phone in Safari I would go to my iCloud web page that looks like this on my Mac.
Is that NOT how iCloud should/would look on my phone via Safari?
This is maybe a dumb question after 3+ year of iPhone'ing
thank you for clarifying or helping me to understand
jojoguitar_mmn_usa

I've been playing with a Galaxy here at work and here's what I've found so far - please feel free to jump in and suggest alternative methods to configure or access the various icloud components.
So the original Q: Can you access your icloud account on Android?
Not entirely: the website can't be used from an android browser (not properly - even with Dolphin HD and posing as different browsers it won't load correctly. So Find my iphone is out, so is the address book or looking at your e-mail or calendar just in a browser window
I was able to setup my e-mail using the IMAP settings published here:
http://support.apple.com/kb/HT4864
Be sure to setup the account manually - and note if you have trouble using SSL try TLS (that worked for me)
Address book is a no go so you'll have to use iTunes to sync all your contacts over to Gmail - if you still have an iPad it means managing contacts in two places though . Same goes for your calendar - transfer it to Gmail and forget about iCloud's calendar. Nice instructions here: http://howto.cnet.com/8301-11310_39-20064060-285/how-to-switch-from-iphone-to-an droid/
iWork is an Apple proprietary bit so don't expect much there.
So in my case, if I'm really going to make the switch to a Galaxy from my iPhone it really means I'm going to have to switch to using google as the backend. The timing to swap over to a galaxy/android phone is not the greatest - given that I'd have to give up my Apple addiction (syncing photos and itunes and losing access to my device tracking). Plus I still have an iPad and a mac and like living in the Apple ecosystem. I think I'll wait and see what the new iPhone looks like before I commit

I sent my iphone for repair. before I sent it I did a backup (on the 7th of august). no i got my phone back but in iTunes I only see a backup from 21st of july. How can I access my latest back up?

I sent my iPhone to Apple for repair. Before I sent it I did a backup (on the 7th of August). Today I got it back, but my iTunes only shows me a backup from 21st july and from today. How can I access my backup from 7th of august?

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

How to allow access to winrs for non-admin user?

I have Windows Server 2012 (and Server 2008, but it is next priority) to monitor it using txwinrm. txwinrm library internally is using WinRS protocol. I have to monitor it using least privileged user, but don't know how to configure access for him.
All I managed to do - is to configure remote Powershell session for my user, but it's look like that winrs and powershell sessions have different security descriptors:
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential Administrator $pwd) -ScriptBlock { 2 + 2}
# gives 4
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential lpu1 $pwd) -ScriptBlock { 2 + 2}
# gives 4
winrs -r:192.168.173.206 -u:Administrator -p:$pwd 'powershell -command "2+2"'
# gives 4
winrs -r:192.168.173.206 -u:lpu1 -p:$pwd 'powershell -command "2+2"'
# Gives Winrs error: Access is denied.
Configuration for my user is following:
(Get-Item WSMan:\localhost\Service\RootSDDL).value
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1141)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)
(Get-PSSessionConfiguration -name Microsoft.Powershell).SecurityDescriptorSddl
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1149)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
(In each security descriptor my user is given general access to protected object).
So what security descriptor should I set to make my winrs query work for non-admin user?

Hi Bunyk,
I can not recreate the erroe you posted, and please also post the screenshoot in your convenience.
I tested with a non-domain user but has the local admin permission of the remote computer, and this worked, before running the remote cmdlet in powershell, I also configured the TrustedHosts.
In addition, the access denied could be also caused to the Protocol Filtering on the remote server, for more detailed information, please refer to this thread:
winrs error:access is denied
I hope this helps.

Photoshop CC2014 running under window 8.1. How do I access mini bridge. It does not show under FILE or WINDOW-EXTENSIONS. Works ok with CS6

Photoshop CC2014 running under window 8.1. How do I access mini bridge. It does not show under FILE or WINDOW-EXTENSIONS. Works ok with CS6

Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

How do I access my airport extreme drives online

how do I access my airport extreme drives over the internet?

Here are the basic steps to share an AirPort Disk over the Internet.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn,) and then, note the IP address shown.
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Disks, and then, select File Sharing.
Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
Verify that Secure Shared Disks = With a disk password. (Recommended)
Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
Click on Update.
To connect to the shared AirPort Disk from a remote location using a Mac:
From the Finder > Go > Connect to Server.
Enter the DynDNS-provided Domain Name or Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
Click Connect.
You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
Click Connect.

How do I access my time capsule over the internet

How do I access my time capsule over the internet. I've already set it up to share over WAN, but I have ATT so my TC is connected to the router provided by ATT can I still access my TC via the internet even though its not directly connected to the Ethernet?

The TC should be in bridge mode.. not setup to share over wan.. that will never work. That is assuming you haven't bridged the ATT router.
Once you bridge the TC see if you can setup BTMM using icloud settings in the TC. As per the Apple docos.. here.
You should also be able to directly access the TC since you have a router with dyndns client at a guess.. the setup is simply forward port 548 to the TC.
Google search this.. there is huge number of resources available. eg
http://useranswer.com/answer/how-can-i-access-my-time-capsule-remotely-with-iclo ud/

How do I access Disk Utility for 10.7.1?

How do I access Disk Utility for 10.7.1? I found it in the forums a few weeks ago, used it, then lost the directions. This is a last ditch attempt
to use OS Lion. I parted my hair incorrectly when I installed and have been plagued by the dread rainbow spinning ball in EVERY application. Yes, every. Name one, Safari, Firefox, Text Edit, Mail, Excel, Word, iTunes, Garage Band, Calculator, Calender, iPhoto....yes, every, and I cannot
find a solution that works. I have back up files on two different hard drives 500 gig and 1 terrabyte with all my music, photo and writing files.
I am a writer and a musician so imagine the frustration. OS 10.6 is an option of course. My dedication to Apple and each new OS is deep so
I am hoping that somehow there will a fix, an upgrade, something that does not require me to go bac to the much more endangered species named OS.
hahhaa! Just stalled waiting for the ball to finish with it's random spinning.... SO, this is like a last desperate .... it just did two more stalls.
NO OTHER apps running, just little Firefox holding on for dear life, last desperate request for a fix.
MacKeeper has been great in sending helpful directions for getting the Antivirus to work after it mysteriously decided to stop working, Quite MacKeeper, go to Activity Monitor, force quit helper, start up MacKeeper and run program. It works!
SO before my third stall stops me, please post directions to open disk utility in administration mode so that I can do any further repairs that have not worked by using it from the open system. Also keychain synching stopped working with Lion.
Thanks to any and all who can help.

Press and hold Command-R keys and reboot. You'll then start up in the Lion Recovery HD. You'll find Disk Utility there.
Command-R to the rescue.
Just hold down Command-R during startup and Lion Recovery springs into action. It lets you choose from common utilities: You can run Disk Utility to check or repair your hard drive, erase your hard drive and reinstall a fresh copy of Lion, or restore your Mac from a Time Machine backup. You can even use Safari to get help from Apple Support online. And if Lion Recovery encounters problems, it will automatically connect to Apple over the Internet.

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ss

There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in.

How do I access my iWeb website when I no longer have the original iWeb program it was published with?

Last Fall, my '06 iMac was vandalized and destroyed unexpectedlyl. Since then, I have'nt been able to access my only website, which was published through iWeb. My new iMac does not have iWeb.
How can I access my main website published through the old iWeb? I must transfer my domain name/site to a new web host and build a new site. My website is out of date and must be updated/replaced asap. Please help.

To edit your website, you need the domain.sites file iWeb uses to store its assets.
You also need iWeb.
If the file is missing and you have no backup, you'll have to start from scratch.
Perhaps you still have the iLife install disks.
And browse this forum to learn how to get a copy of iLife. It's often discussed.

How do I access 11i (11.5.9) in Linux Mozilla?

Similar Messages

Maybe you are looking for